Maintenance Monitoring System Using Visual Basic.
iii
ABSTRACT
This project is aimed at developing an inventory control management system, the
system that used to save all electrical data at machine and the system that used to save
report of machine break down to allow operator controlling and updating the system. This
system is developed by using software Visual basic integrated with Microsoft Access.
These. systems are use to ensure the units handling process in control, no damage to
component, cost saving, reduce unnecessary downtime and improve the productivity. The
implementation actually is to set up one control location with personal computer database
to manage issuing, to reduce output of spare part tools and to record all report of machine
break down with effectively and faster. The previous system that are used before, have
many problem such as the technicians or engineers are to slow to repair the machine and
the outgoing of the spare part basically using manual method which is not containable by
just using one manual writing report book. Thus, the consequence of it making the factory
productivity becomes lower or insufficient. Engineers are needed to record and observe the
data from the machine manually. This system that will be produced will be able to solve
and minimize the problems that are faced by nowadays problem. By doing so, Molex
Company is able to increase the income and productivity and is able to minimize the cost
by improving their system. The efficiency of the system before doesn't have a consistency
of efficiency. So, the system were analyzed the level of efficiency. From the analysis
undertaken, it has been proven that the efficiency of this system is at a level of satisfactory
and no errors were identified in this system. Finally, this is the precious dream come-true
opportunity collaboration between university side and Molex (M) Company working
closely on this project development. This is not only for Molex (M) manufacturing
production enhancement but also to boost up university reputation and bring out the best
public image through academic co-operate with industry.
© Universiti Teknikal Malaysia Melaka
ABSTRACT
This project is aimed at developing an inventory control management system, the
system that used to save all electrical data at machine and the system that used to save
report of machine break down to allow operator controlling and updating the system. This
system is developed by using software Visual basic integrated with Microsoft Access.
These. systems are use to ensure the units handling process in control, no damage to
component, cost saving, reduce unnecessary downtime and improve the productivity. The
implementation actually is to set up one control location with personal computer database
to manage issuing, to reduce output of spare part tools and to record all report of machine
break down with effectively and faster. The previous system that are used before, have
many problem such as the technicians or engineers are to slow to repair the machine and
the outgoing of the spare part basically using manual method which is not containable by
just using one manual writing report book. Thus, the consequence of it making the factory
productivity becomes lower or insufficient. Engineers are needed to record and observe the
data from the machine manually. This system that will be produced will be able to solve
and minimize the problems that are faced by nowadays problem. By doing so, Molex
Company is able to increase the income and productivity and is able to minimize the cost
by improving their system. The efficiency of the system before doesn't have a consistency
of efficiency. So, the system were analyzed the level of efficiency. From the analysis
undertaken, it has been proven that the efficiency of this system is at a level of satisfactory
and no errors were identified in this system. Finally, this is the precious dream come-true
opportunity collaboration between university side and Molex (M) Company working
closely on this project development. This is not only for Molex (M) manufacturing
production enhancement but also to boost up university reputation and bring out the best
public image through academic co-operate with industry.
© Universiti Teknikal Malaysia Melaka