Three-Phase 115-203V, 0.5HP Variable Speed Motor Drives Controller.
- VJ-
ABSTRACT
Today, more demanding drives used in machine tools, spindles, high-speed
elevators, dynamometers, mine winders, rolling mills, glass float lines, and the like
have much more sophisticated requirement and must afford the fleXIl>ility to allow
for regulation of a nwnbers of variables, such as speed, position, acceleration, and
torque. This project was developed because of the requirement of factories and
people around the world. The concept of this project is, when the power supply is
ON, the current will be conducts through the rectifier, OC bus, 3-phase inverter and
an induction motor. Then, an induction motor will rotate. When the induction motor
rotates, the speed of the motor will be controlled by the microcontroller. So, through
this project student be able to minimize or maximize the speed of the motor by using
microcontroller.
© Universiti Teknikal Malaysia Melaka
ABSTRACT
Today, more demanding drives used in machine tools, spindles, high-speed
elevators, dynamometers, mine winders, rolling mills, glass float lines, and the like
have much more sophisticated requirement and must afford the fleXIl>ility to allow
for regulation of a nwnbers of variables, such as speed, position, acceleration, and
torque. This project was developed because of the requirement of factories and
people around the world. The concept of this project is, when the power supply is
ON, the current will be conducts through the rectifier, OC bus, 3-phase inverter and
an induction motor. Then, an induction motor will rotate. When the induction motor
rotates, the speed of the motor will be controlled by the microcontroller. So, through
this project student be able to minimize or maximize the speed of the motor by using
microcontroller.
© Universiti Teknikal Malaysia Melaka