DAFTAR PUSTAKA Alpoz A. R., Eltugrul F., Cogulu D., Topaloglu A., Tonaglu M., Kaya E., 2008. Perbedaan Kekuatan Tekan (Compressive Strength) Resin Komposit Nanofill Antara Teknik Inkremental dan Teknik Bulk Fill.
DAFTAR PUSTAKA
Alpoz A. R., Eltugrul F., Cogulu D., Topaloglu A., Tonaglu M., Kaya E., 2008.
Effect of Light Curing Method and Exposure Time on Mechanical
Properties of Resin Based Dental Material, European J Dent., 2 : 3742.
Alrahlah A., Silikas N., Watts D. C., 2014. Post-cure Depth of Cure of Bulk Fill
Dental Resin Composites, Dent Matter., 30 (2): 149-154.
Anusavice K. J., 2004. Phillips’ Science of Dental Materials, 10th ed, W. B.
Philadelphia : Saunders Company. pp : 227-249.
Aryanto M., Armila M., Aripin D., 2013. Compressive Strength of Hybrid
Composites Resin With Post Curing Light Emitting Diode Using
Three Different Sizes of Lightbox, J. Dent. (Maj Ked Gigi)., 46 (2):
1001-106.
Brandao L., Adabo G. L., Vaz L. G., Saad J. R. C., 2005. Compressive Strength
and Compressive Fatigue Limit of Conventional and High Viscosity
Posterior Resin Composite, Braz Oral Res., 19 (4): 272-7.
Christensen G. J., 2012. Advantages and Challenges of Bulk-Fill Resins, Clinical
Report Found., 5 (1) : 1-6.
Craig, R. G., 2002. Restorative Dental Materials, Ed 8, St. Louis : Mosby. pp :
232-239.
Craig R. G., dan Powers J. M., 2002. Restorative Dental Materials, 10th Ed,
Philadelphia : Mosby. pp : 122-127.
Dahlan M.S., 2013. Statistik Untuk Kedokteran dan Kesehatan, 5th., Jakarta :
Salemba Medika. pp : 62-68.
Dhurohmah, Mujayanto R., Chumaeroh S., 2014. Pengaruh Polishing dan Asam
Sitrat Terhadap Microleakage Pada Tumpatan Resin Komposit
Nanofiller Aktivasi Light Emiting Diode – In Vitro, ODONTO J
Dent., 1 (1): 11-15.
Diansari V., Eriwati Y. K., Indriani D. J., 2008. Kebocoran Mikro Pada Restorasi
Komposit Resin Dengan Sisten Total-Etch dan Self-Etch Pada
Berbagai Jarak Penyinaran, Indonesian J of Dent., 15 (2): 121-130.
Duarte J. R., Sillas, Dinelli, Wellington, Silva, Maria H. C., 2007. Influence of
Resin Composite Insertion Technique in Preparation with High CFactor, Q Int., 38 (10): 829-835.
40
El-Mowafy O., El-Badrawy W., Lewis D. W., 2005. Efficacy of Halogen
Photopolymerization Units in Private Dental Office in Toronto, J Can
Dent Assoc., 7 (8): 587.
Federer W.T., 1997. Experimental Design Theory and Application , 3rd., New
Delhi Bombay Calculata : Oxford and IBH Publishing Co.
Fitriyani S., Herda E., 2008. Perkembangan Sumber Cahaya Dalam Bidang
Kedokteran Gigi, Dentika Dental J ., 13 (1): 98-101.
Garcia A. H., Martinez M. A., Vila J. C., dkk, 2006. Composite Resins. A review
of The Materials and Clinical Indications, Med Oral Patol Cir Bucal.,
11 : 215-20.
Gogna R., Jagadis S., Shashikal K., 2011. A Comparative In Vitro Study of
Microleakage by Radioactive Isotope and Compressive Strenght of
Three Nanofilled Composite Resin Restorations, J Conserv Dent., 14
(2) : 128-131.
Hamouda I. M., Elkader H. A., 2012. Evaluation of The Mechanical Properties of
Nanofilled Composite Resin Restorative Material. J Dent Biomech., 3:
38-242.
Katona A., Barrak I., 2016. Comparison of Composite Restoration Techniques,
Interdisciplinary Description of Complex Systems (Hillside Dent)., 14
(1): 101-115.
Klymus M.E., Shinkai R. S. A., Mota E. G., Oshima H. M. S., Spohr A. M., Jr L.
H. B., 2007. Influence of the Mechanical Properties of Composites for
Indirect Dental Restorations on Pattern Failure, Stomatologija., 9:5660.
Kofford K. R., 2001. Advances in Restorative Materials. Dent. Clin. North Am.,
45 (1): 7-29.
Li Y., Lin H., Zheng G., Zhang X., Xu Y., 2015. Comparasion Study on Resin
Modified Luting Glass Ionomer Cements, Bio-Med Materials and
Engineering., 26 (2015) : S9-S17.
Lindberg A., Van Dijken J. W. V. Linberg M., 2007. Nine Year Evaluation of a
Polyacid Modified Resin Composite / Resin Composite Open
Sandwich Techniques in Class II Cavities, J. Dent., 35: 124-129.
41
Lovan G., Stoleriu S., Moldovanu A., Morogai S., Adrian S., 2011. Sem Study of
Interface Between the Cavity Wall and Composite Resin in Cavities
Filled Using Vibration, Int J Med Dent.,1: 254-258.
Neo J. C. L., Yap A. U. J., 2005. Composite Resin., In : Mount Gj, Hume WR, eds.
Preservation and restoration of Tooth Structure, Australia :
Knowlegde Books and Software. pp : 67-75.
Oliveira G. U. D., Mondelli R. F. L., Rodrigues M. C., Franco E. B., Ishikiriama
S. K., Wang L., 2012. Impact of Filler Size and Distribution on
Roughness and Wear of Composite Resin After Simulated
Toothbrushing, J Appl Oral Sci., 510-516.
Pasril Y., dan Pratama W. A., 2013. Comparison of Compressive Strength Hybrid
Composite Resin Using Halogen and LED Light, IDJ ., 2 (2) : 83-90.
Permatasari R., dan Usman M., 2008. Penutupan Diastema dengan Menggunakan
Komposit Nanofiller, IDJ., 15 (3): 239-246.
Phillips R. W., 2004. Skinner Science of Dental Materials, ed. 9, Philadelphia :
WB. Saunders Company. pp : 233-235.
Powers J. M., Sakaguchi R. I., 2006. Craig’s Restorative Dental Materials. 12nd
ed., India : Elsevier. pp : 64-72
Price R. B., Doyle G., Murphy D., 2000. Effect of Composite Thickness on the
Shear Bond Strength to Dentin, J Can Dent Assoc., 66: 35-9.
Putriyanti F., Herda E., Soufyan A., 2012. Pengaruh Saliva Buatan Terhadap
Diametral Tensile Strenght micro fine hybrid resin composite yang
direndam dalam minuman isotonic, Jurnal PDGI., 60 (1) : 43-47.
Sapra V., Taneja S., Kumar M., 2013. Surface Geometry of Various Nanofiller
Composite using Different Polishing System : a Comparative Study, J
Conserv Dent., 16(6) : 559-563.
Schmitt, Regina M., Fabiana S., Flavia P., Mario A., Wagner B., 2011. Effect of
the Polishing Procedures on Color Stability and Surface Roughness of
Composite Resins, ISRN Dentistry., 10.5402/2011/617672.
Schneider L. F. J., Cavalcante L. M., Silikas N., 2010. Shrinkage Stresses
Generated during Resin-Composite Applications: A Review, J Dent
Biomech., 1 (1): 1-4.
42
Sarcev, Ivan, N., Petronijevic, Branislava, Atanackovic, Teodor, M., 2012. A
Biomechanical Model of a New Incremental Techinques for Tooth
Restoration, Acta Biomech., Vol.14, No. 3:85-91.
Silva C. M., dan Dias K. R. H. C., 2009. Compressive Strength of Esthetic
Restorative materials Polimerized with Quartz- Tungsten- Halogen
Light and Blue LED, Braz Dent J., 20 (1) : 54-57.
Summit J. B., Robbins J. W., Hilton, T. J., Scwartz R. S., 2006. Fundamentals of
Operative Dentistry: A Contemporary Approach. 3rd ed., China:
Quintessence Publishing Co., pp : 246.
Susanto A. A., 2005. Pengaruh Ketebalan Bahan dan Lamanya Waktu Penyinaran
Terhadap Kekerasan Permukaan Resin Komposit Sinar, Maj. Ked.
Gigi (Dent. J)., 38 (1) : 32-35.
Van Ende, Annelies, Munck D. J., Kristen L., Van L., Poitevin A., 2012. Bulk
Filling of high Factor C Posterior Cavities : Effect of Andhesion to
Cavity Bottom Dentin, Dent Matter., (9):1-9.
Van noort R., 2007. Introduction to Dental Material, 3rd ed, London : Mosby. pp :
99-121.
Vichy A., Goracci C., Ferrari M., 2009. Clinical Study of the Self Adhering
Flowable Composite Resin Vertise Flow in Class I Restoration : Six
Mounth Follow Up, Int Dent SA., 12 (1) : 14-22.
Yamazaki P. C., Bedran-Russo A. K. B., Pereira,P. N. R., Swift J. R., 2006.
Microleakage Evaluation of a New Low Shrinkage Composite
Restorative Material, OpDent., 31 (6) : 670-676.
43
Alpoz A. R., Eltugrul F., Cogulu D., Topaloglu A., Tonaglu M., Kaya E., 2008.
Effect of Light Curing Method and Exposure Time on Mechanical
Properties of Resin Based Dental Material, European J Dent., 2 : 3742.
Alrahlah A., Silikas N., Watts D. C., 2014. Post-cure Depth of Cure of Bulk Fill
Dental Resin Composites, Dent Matter., 30 (2): 149-154.
Anusavice K. J., 2004. Phillips’ Science of Dental Materials, 10th ed, W. B.
Philadelphia : Saunders Company. pp : 227-249.
Aryanto M., Armila M., Aripin D., 2013. Compressive Strength of Hybrid
Composites Resin With Post Curing Light Emitting Diode Using
Three Different Sizes of Lightbox, J. Dent. (Maj Ked Gigi)., 46 (2):
1001-106.
Brandao L., Adabo G. L., Vaz L. G., Saad J. R. C., 2005. Compressive Strength
and Compressive Fatigue Limit of Conventional and High Viscosity
Posterior Resin Composite, Braz Oral Res., 19 (4): 272-7.
Christensen G. J., 2012. Advantages and Challenges of Bulk-Fill Resins, Clinical
Report Found., 5 (1) : 1-6.
Craig, R. G., 2002. Restorative Dental Materials, Ed 8, St. Louis : Mosby. pp :
232-239.
Craig R. G., dan Powers J. M., 2002. Restorative Dental Materials, 10th Ed,
Philadelphia : Mosby. pp : 122-127.
Dahlan M.S., 2013. Statistik Untuk Kedokteran dan Kesehatan, 5th., Jakarta :
Salemba Medika. pp : 62-68.
Dhurohmah, Mujayanto R., Chumaeroh S., 2014. Pengaruh Polishing dan Asam
Sitrat Terhadap Microleakage Pada Tumpatan Resin Komposit
Nanofiller Aktivasi Light Emiting Diode – In Vitro, ODONTO J
Dent., 1 (1): 11-15.
Diansari V., Eriwati Y. K., Indriani D. J., 2008. Kebocoran Mikro Pada Restorasi
Komposit Resin Dengan Sisten Total-Etch dan Self-Etch Pada
Berbagai Jarak Penyinaran, Indonesian J of Dent., 15 (2): 121-130.
Duarte J. R., Sillas, Dinelli, Wellington, Silva, Maria H. C., 2007. Influence of
Resin Composite Insertion Technique in Preparation with High CFactor, Q Int., 38 (10): 829-835.
40
El-Mowafy O., El-Badrawy W., Lewis D. W., 2005. Efficacy of Halogen
Photopolymerization Units in Private Dental Office in Toronto, J Can
Dent Assoc., 7 (8): 587.
Federer W.T., 1997. Experimental Design Theory and Application , 3rd., New
Delhi Bombay Calculata : Oxford and IBH Publishing Co.
Fitriyani S., Herda E., 2008. Perkembangan Sumber Cahaya Dalam Bidang
Kedokteran Gigi, Dentika Dental J ., 13 (1): 98-101.
Garcia A. H., Martinez M. A., Vila J. C., dkk, 2006. Composite Resins. A review
of The Materials and Clinical Indications, Med Oral Patol Cir Bucal.,
11 : 215-20.
Gogna R., Jagadis S., Shashikal K., 2011. A Comparative In Vitro Study of
Microleakage by Radioactive Isotope and Compressive Strenght of
Three Nanofilled Composite Resin Restorations, J Conserv Dent., 14
(2) : 128-131.
Hamouda I. M., Elkader H. A., 2012. Evaluation of The Mechanical Properties of
Nanofilled Composite Resin Restorative Material. J Dent Biomech., 3:
38-242.
Katona A., Barrak I., 2016. Comparison of Composite Restoration Techniques,
Interdisciplinary Description of Complex Systems (Hillside Dent)., 14
(1): 101-115.
Klymus M.E., Shinkai R. S. A., Mota E. G., Oshima H. M. S., Spohr A. M., Jr L.
H. B., 2007. Influence of the Mechanical Properties of Composites for
Indirect Dental Restorations on Pattern Failure, Stomatologija., 9:5660.
Kofford K. R., 2001. Advances in Restorative Materials. Dent. Clin. North Am.,
45 (1): 7-29.
Li Y., Lin H., Zheng G., Zhang X., Xu Y., 2015. Comparasion Study on Resin
Modified Luting Glass Ionomer Cements, Bio-Med Materials and
Engineering., 26 (2015) : S9-S17.
Lindberg A., Van Dijken J. W. V. Linberg M., 2007. Nine Year Evaluation of a
Polyacid Modified Resin Composite / Resin Composite Open
Sandwich Techniques in Class II Cavities, J. Dent., 35: 124-129.
41
Lovan G., Stoleriu S., Moldovanu A., Morogai S., Adrian S., 2011. Sem Study of
Interface Between the Cavity Wall and Composite Resin in Cavities
Filled Using Vibration, Int J Med Dent.,1: 254-258.
Neo J. C. L., Yap A. U. J., 2005. Composite Resin., In : Mount Gj, Hume WR, eds.
Preservation and restoration of Tooth Structure, Australia :
Knowlegde Books and Software. pp : 67-75.
Oliveira G. U. D., Mondelli R. F. L., Rodrigues M. C., Franco E. B., Ishikiriama
S. K., Wang L., 2012. Impact of Filler Size and Distribution on
Roughness and Wear of Composite Resin After Simulated
Toothbrushing, J Appl Oral Sci., 510-516.
Pasril Y., dan Pratama W. A., 2013. Comparison of Compressive Strength Hybrid
Composite Resin Using Halogen and LED Light, IDJ ., 2 (2) : 83-90.
Permatasari R., dan Usman M., 2008. Penutupan Diastema dengan Menggunakan
Komposit Nanofiller, IDJ., 15 (3): 239-246.
Phillips R. W., 2004. Skinner Science of Dental Materials, ed. 9, Philadelphia :
WB. Saunders Company. pp : 233-235.
Powers J. M., Sakaguchi R. I., 2006. Craig’s Restorative Dental Materials. 12nd
ed., India : Elsevier. pp : 64-72
Price R. B., Doyle G., Murphy D., 2000. Effect of Composite Thickness on the
Shear Bond Strength to Dentin, J Can Dent Assoc., 66: 35-9.
Putriyanti F., Herda E., Soufyan A., 2012. Pengaruh Saliva Buatan Terhadap
Diametral Tensile Strenght micro fine hybrid resin composite yang
direndam dalam minuman isotonic, Jurnal PDGI., 60 (1) : 43-47.
Sapra V., Taneja S., Kumar M., 2013. Surface Geometry of Various Nanofiller
Composite using Different Polishing System : a Comparative Study, J
Conserv Dent., 16(6) : 559-563.
Schmitt, Regina M., Fabiana S., Flavia P., Mario A., Wagner B., 2011. Effect of
the Polishing Procedures on Color Stability and Surface Roughness of
Composite Resins, ISRN Dentistry., 10.5402/2011/617672.
Schneider L. F. J., Cavalcante L. M., Silikas N., 2010. Shrinkage Stresses
Generated during Resin-Composite Applications: A Review, J Dent
Biomech., 1 (1): 1-4.
42
Sarcev, Ivan, N., Petronijevic, Branislava, Atanackovic, Teodor, M., 2012. A
Biomechanical Model of a New Incremental Techinques for Tooth
Restoration, Acta Biomech., Vol.14, No. 3:85-91.
Silva C. M., dan Dias K. R. H. C., 2009. Compressive Strength of Esthetic
Restorative materials Polimerized with Quartz- Tungsten- Halogen
Light and Blue LED, Braz Dent J., 20 (1) : 54-57.
Summit J. B., Robbins J. W., Hilton, T. J., Scwartz R. S., 2006. Fundamentals of
Operative Dentistry: A Contemporary Approach. 3rd ed., China:
Quintessence Publishing Co., pp : 246.
Susanto A. A., 2005. Pengaruh Ketebalan Bahan dan Lamanya Waktu Penyinaran
Terhadap Kekerasan Permukaan Resin Komposit Sinar, Maj. Ked.
Gigi (Dent. J)., 38 (1) : 32-35.
Van Ende, Annelies, Munck D. J., Kristen L., Van L., Poitevin A., 2012. Bulk
Filling of high Factor C Posterior Cavities : Effect of Andhesion to
Cavity Bottom Dentin, Dent Matter., (9):1-9.
Van noort R., 2007. Introduction to Dental Material, 3rd ed, London : Mosby. pp :
99-121.
Vichy A., Goracci C., Ferrari M., 2009. Clinical Study of the Self Adhering
Flowable Composite Resin Vertise Flow in Class I Restoration : Six
Mounth Follow Up, Int Dent SA., 12 (1) : 14-22.
Yamazaki P. C., Bedran-Russo A. K. B., Pereira,P. N. R., Swift J. R., 2006.
Microleakage Evaluation of a New Low Shrinkage Composite
Restorative Material, OpDent., 31 (6) : 670-676.
43