1. Home
  2. Lainnya

Product Design Consideration For Short Glass Fiber Reinforced Composite Brake Pedal Design.

v

ABSTRACT

This thesis discusses the main parameters required in designing a short glass fiber
reinforced composite for brake pedal.

The design of a composite brake pedal

involves four major considerations that are closely intertwined. They are material,.
processing, design and co:st estimation. Based on the study of these four maint
elements, several design concepts was produced and some wiU than him be chosen to
be made prototype. The selection was made based on the analysis result that was
produced from SolidWorks software. At the end, the detail of design of brake pedal.
was discussed in this thesis . .

© Universiti Teknikal Malaysia Melaka

Dokumen yang terkait

Perbedaan Celah Mikro Pasak Glass Prefabricated Fiber Reinforced Dan Pasak Pita Polyethylene Fiber Reinforced Dengan Menggunakan Sistem Adhesif Total- Etch (Penelitian In Vitro).

5 86 97

Pengaruh Sistem Pasak Customised Dari Pita Polyethylene Reinforced Fiber Dengan Dan Tanpa Preparasi Ferrule Pada Terhadap Ketahanan Fraktur Dan Pola Fraktur Secara In Vitro

1 80 80

Concurrent conceptual design of hybrid natural/glass fiber reinforced thermoplastic composites for automotive parking brake lever.

0 3 24

Wear Behavior of Carbon Nanotube (CNT)Short Natural Fiber Reinforced Epoxy Composite.

0 4 24

Design Of Casting Mold For Natural Fiber – Metal Matrix Composite Material.

0 4 24

Design And Fabrication Of Glass - Fiber Composite Bodywork For UTeM Formula Style Race Car.

0 5 24

New Design Using Fiber Glass Composite (FRPC) For Jimny Back Door.

0 2 24

Alternative Material For Motorcycle Brake Pedal.

0 5 24

The design of light weight automotive brake pedal.

0 5 24

Design and fabrication of Macro Optical Fiber Made of Polymer-Glass Composite for Light Tunneling in Hybrid Solar Lighting.

0 0 4