The Design And Development Of Boat Winch : Effect On Mountings.
UNIVERSITI TEKNIKAL MALAYSIA MELAKA
THE DESIGN AND DEVELOPMENT OF
BOAT WINCH: kFFECT ON MdbNTING
Thesis submitted in accordance with the requirements of the
Universiti Teknikal Malaysia Melaka for the Degree of
Bache}()r of Engineering (Honours) Manufacturing (Process)
By
MOHDTAUFIKBINTALffi
B050410123
Faculty of Manufacturing Engineering
Jun 2007
APPROVAL
This thesis submitted to the senate of UTeM and has been accepted as partial
fulfillment of the requirements for the degree ofBachelor of Manufacturing Engineering
(Manufacturing Process). The members of the supervisory committee are as follow:
ﾷ ﾷ ﾷﾷ ｾ
ﾷ Ｍ ﾷ ﾷ ﾷ ﾷ ﾷ ﾷ＠
ｍｾｌﾧａﾫｵ＠
Main Supervisor
ｬｩ＿ｦｾ＠
Ketua Jabatan (Proses Pembf.!:itan)
Faku"i ｋｩＡｪｵｲｴ･＼ｾ｡ｮ＠
Peml!u"ran
Universlti TeKnikal Malaysta Metaka
Karung Berkunci 1200. Ayer Keroh
75450 Melaka
Co-Supervisor
(Official Stamp & Date)
DECLARATION
I hereby, declare this thesis entitled
"The Design and Development of Boat Winch: Effect on Mountings"
is the results of my own research except as cited in the reference.
Signature
Author Name
Date
MOHD TAUFIK BIN TALffi
15 MAY 2007
KUTKM
UNIVERSITI TEKNIKAL MALAYSIA MELAKA
BORANG PENGESAHAN STATUS TESIS*
JUDUL: THE DESIGN AND DEVELOPMENT OF BOAT WINCH: EFFECT ON MOUNTINGS
SESI PENGAJIAN: 2/2006-2007
MOHO TAUFIK BIN TALIB
Saya
mengaku membenarkan tesis (PSM/Sarjana/Doktor Falsafah) ini disimpan di
Perpustakaan Kolej Universiti Teknikat Kebangsaan Malaysia (KUTKM) dengan
syarat-syarat kegunaan seperti berikut:
1. Tesis adalah hak milik Kolej Universiti Teknikal Kebangsaan Malaysia.
2. Perpustakaan Kolej Universiti Teknikal Kebangsaan Malaysia dibenarkan
membuat salinan untuk tujuan pengajian sahaja.
3. Perpustakaan dibenarkan membuat salinan tesis ini sebagai bahan pertukaran
antara institusi pengajian tinggi.
4. **Sila tandakan ＨｾＩ＠
D
SULIT
(Mengandungi maklumat yang berdarjah keselamatan
atau kepentingan Malaysia yang termaktub di dalam
AKTA RAHSIA RASMI1972)
D
TERHAD
(Mengandungi maklumat TERHAD yang telah ditentukan
oleh organisasi/badan di mana penyelidikan dijalankan)
Q]
TIDAK TERHAD
;::::;>
(TANDATANGAN PENULIS)
(TANDATANGAN PENYELIA)
Alamat Tetap:
KG SEROM SATU,
84410 SG MATl, MUAR,
JOHOR.
(
Tarikh: --""'"'2=0:
THE DESIGN AND DEVELOPMENT OF
BOAT WINCH: kFFECT ON MdbNTING
Thesis submitted in accordance with the requirements of the
Universiti Teknikal Malaysia Melaka for the Degree of
Bache}()r of Engineering (Honours) Manufacturing (Process)
By
MOHDTAUFIKBINTALffi
B050410123
Faculty of Manufacturing Engineering
Jun 2007
APPROVAL
This thesis submitted to the senate of UTeM and has been accepted as partial
fulfillment of the requirements for the degree ofBachelor of Manufacturing Engineering
(Manufacturing Process). The members of the supervisory committee are as follow:
ﾷ ﾷ ﾷﾷ ｾ
ﾷ Ｍ ﾷ ﾷ ﾷ ﾷ ﾷ ﾷ＠
ｍｾｌﾧａﾫｵ＠
Main Supervisor
ｬｩ＿ｦｾ＠
Ketua Jabatan (Proses Pembf.!:itan)
Faku"i ｋｩＡｪｵｲｴ･＼ｾ｡ｮ＠
Peml!u"ran
Universlti TeKnikal Malaysta Metaka
Karung Berkunci 1200. Ayer Keroh
75450 Melaka
Co-Supervisor
(Official Stamp & Date)
DECLARATION
I hereby, declare this thesis entitled
"The Design and Development of Boat Winch: Effect on Mountings"
is the results of my own research except as cited in the reference.
Signature
Author Name
Date
MOHD TAUFIK BIN TALffi
15 MAY 2007
KUTKM
UNIVERSITI TEKNIKAL MALAYSIA MELAKA
BORANG PENGESAHAN STATUS TESIS*
JUDUL: THE DESIGN AND DEVELOPMENT OF BOAT WINCH: EFFECT ON MOUNTINGS
SESI PENGAJIAN: 2/2006-2007
MOHO TAUFIK BIN TALIB
Saya
mengaku membenarkan tesis (PSM/Sarjana/Doktor Falsafah) ini disimpan di
Perpustakaan Kolej Universiti Teknikat Kebangsaan Malaysia (KUTKM) dengan
syarat-syarat kegunaan seperti berikut:
1. Tesis adalah hak milik Kolej Universiti Teknikal Kebangsaan Malaysia.
2. Perpustakaan Kolej Universiti Teknikal Kebangsaan Malaysia dibenarkan
membuat salinan untuk tujuan pengajian sahaja.
3. Perpustakaan dibenarkan membuat salinan tesis ini sebagai bahan pertukaran
antara institusi pengajian tinggi.
4. **Sila tandakan ＨｾＩ＠
D
SULIT
(Mengandungi maklumat yang berdarjah keselamatan
atau kepentingan Malaysia yang termaktub di dalam
AKTA RAHSIA RASMI1972)
D
TERHAD
(Mengandungi maklumat TERHAD yang telah ditentukan
oleh organisasi/badan di mana penyelidikan dijalankan)
Q]
TIDAK TERHAD
;::::;>
(TANDATANGAN PENULIS)
(TANDATANGAN PENYELIA)
Alamat Tetap:
KG SEROM SATU,
84410 SG MATl, MUAR,
JOHOR.
(
Tarikh: --""'"'2=0: