Denys Candra Hutama 21100112130078 DAFTAR PUSTAKA
DAFTAR PUSTAKA
Azizi, M.A. 2014. Pengembangan Metode Reliabilitas Penentuan Kestabilan
Lereng Tambang terbuka Batubara di Indonesia . Desertasi (tidak
dipublikasikan) Jurusan Rekayasa Teknik Pertambangan Institiut Teknologi
Bandung: Bandung.
Azizi, M.A., Kramadibrata, S., Wattimena, R., Andriansyah, Y. 2012. Analisis
Risiko Kestabilan Lereng Tambang Terbuka (Studi Kasus Tambang Mineral
X).Prosiding Simposium dan Seminar Geomekanika ke 1: Jakarta.
Azizi, M.A dan Handayani, H.E. 2011. Karakterisasi Parameter Masukan Untuk
Analisis Kestabilan Lereng Tunggal (Studi Kasus di PT. Bukit Asam Tbk,
Tanjing Enim).Prosiding Seminar Nasional AvoER ke 3: Palembang.
Azizi, M.A., Kramadibrata, S., Wattimena, R., Sidi, I.D. 2012. Probabilistic
Analysis of Physical Models Slope Failure. Elsevier: International
Symposium on Earth Science and Technology CINEST 2012.
Autralian Standard. 2005. Technical Memorandum for Geotechnical Mapping :
Queensland.
Biantoro, E., Muritno, B.P., Mamuaya, J.M.B. 1992. Inversion Faults as The
Major Structural Control in the Northern Part of The Kutai Basin, East
Kalimantan.Proceedings Indonesian Petroleum Association, 21st Annual
Convention and Exhibition, October 1992, p.45-46.
Bieniawski, Z.T. 1989. Engineering rock mass classification. John Wiley
Interscience: New York.
Bowles, J.E. 1984. Physical and Geotechnical Properties of Soil: Second Edition .
McGraw-Hill: New York, USA.
Brady, B.H.G and Brown, E.T. 2004. Rock Mechanics for Underground Mining
Third Edition. Kluwer Academic Publishers: Boston, USA.
Deere, D.U. 1963. Technical Description of Rock Cores for Engineering
Purposes. Felsmechanik und Ingenieurgeologie (Rock Mechanics and
Engineering Geology), 1(1). 16-22.
Geo-Slope International Ltd. 2007. Stability Modelling with Slope/w 2007
version-An Engineering Methodology First edition . Geo-Slope International
Ltd: Canada.
Hoek, E and Bray, J.W. 1981. Rock Slope Engineering. The Institution of Mining
and Metallurgy. 3rd edition : London.
Hoek, E and Brown, E.T. 1980. Empirical Strength Criterion for Rock Masses.
Journal of the Geotechnical Engineering Division: Proceedings of
American Society of Civil Engineers, Vol. 106.
Hoek, E and Brown, E.T. 1997. Technical Note Practical Estimates of Rock Mass
Strength. Elsevier: International Journal Rock Mechanics and Mining
Sciences Vol 34, No 8 pages 1165-1186.
Hoek,E., Torres, C.C., Corkum, B. 2002. Hoek Brown Criteria Failure Criteria
2002. NARMS-TAC Conference: Toronto.
Hoek, E., Carter, T.G., Diedrichs, M.S. 2013. Quantification of Geological
Strength Index Chart. Proceedings of 47th Geomechanic Symposium: San
Fransisco.
Hoek, E., Kaiser, PK., Bawden, W.F. 1995. Support of Underground Excavations
in Hard Rock. Balkema: Rotterdam.
Hoek, E and Karzulovic, A. 2000. Rock Mass Properties for Surface Mines. Slope
Stability in Surface Mining Conference: Society for Mining, Metallurgical
and Exploration 2000 p 59-70
Hoek, E and Marinos, P. 2000. GSI: Geologically Friendly Tool for Rock Mass
Strength Estimation.Proceeding of the International Conference
Geotechnical and Geological Engineering: Melbourne.
Hoek, E. 1998. Technical Note Reliability of Hoek-Brown Estimates of Rock
Mass Properties and their impact on Design. Elsevier: International Journal
Rock Mechanics and Mining Sciences Vol 35 No. 1 pp 63-68.
Hoek, E., Read, J., Karzulovic, A., Chen, Z.Y. 2000. Rock Slopes for Civil and
Mining Engineering. Proceeding of the International Conference
Geotechnical and Geological Engineering: Melbourne.
Hoek, E. 2001. Rock Mass Properties for Underground Mines. Publications of the
Underground Mining Methods: Engineering Fundamentals and
International ccase Studies: Colorado.
Hoek, E. 2002. A brief history of the Developmenet of the Hoek Brown failure
Criterion. Rocscience: Toronto.
Hoek, E. 2009. Fundamental of Slope Design. Slope Stability Conference:
Santiago, Chile.
Hoek, E. 2012. Blast Damage Factor D. Rocscience: Toronto.
Hunt R. E.. 2007. Characteristics of Geologic Materials and Formations A Field
Guide for Geotechnical Engineers. Taylor & Francis Group: London.
Jaeger, J.C., Cook, N.G.W., Zimmerman, R.W. 2007. Fundamental of Rock
Mechanics Fourth Edition. Blackwell Publishing: USA.
Krahn, J. 2004. Stability Modelling with Slope/w-An Engineering Methodology
First edition. Geo-Slope International, Ltd: Canada.
Marinos, V., Marinos, P., Hoek, E. 2005. The Geological Strength Index:
Application and Limitation. Springer: Bull Eng Geol Environ (2005) 64: 5565.
Santosa, B., Suprapto, H., Suryadi, H.S. 1998. Mekanika Tanah Lanjutan.
Gunadarma: Jakarta.
Sukardi, Sikumbang. N., Umar, Sunaryo. 1995. Peta Geologi Regional Lembar
Sangatta, skala 1 : 250.000. Pusat Penelitian dan Pengembangan Sumber
Daya Geologi: Jakarta.
Swana, G.W., Muslim, D., Sophian, I. 2012. Desain Lereng Final Dengan Metode
RMR, SMR dan Analisis Kestabilan Lereng:Pada Tambang Batubara
Terbuka, Kabupaten Tanah Laut, Kalimantan Selatan. Buletin Sumber Daya
Geologi Volume 7 Nomor 2:Bandung.
Wyllie, D.C and Mah, C.W. 2004. Rock Slope Engineering Civil and Mining 4th
Edition. Spon Press Taylor and Francis Group: London.
Zakaria, Z. 2011. Analisis Kestabilan Lereng. Jurusan Teknik Geologi Universitas
Padjajaran: Bandung.
Azizi, M.A. 2014. Pengembangan Metode Reliabilitas Penentuan Kestabilan
Lereng Tambang terbuka Batubara di Indonesia . Desertasi (tidak
dipublikasikan) Jurusan Rekayasa Teknik Pertambangan Institiut Teknologi
Bandung: Bandung.
Azizi, M.A., Kramadibrata, S., Wattimena, R., Andriansyah, Y. 2012. Analisis
Risiko Kestabilan Lereng Tambang Terbuka (Studi Kasus Tambang Mineral
X).Prosiding Simposium dan Seminar Geomekanika ke 1: Jakarta.
Azizi, M.A dan Handayani, H.E. 2011. Karakterisasi Parameter Masukan Untuk
Analisis Kestabilan Lereng Tunggal (Studi Kasus di PT. Bukit Asam Tbk,
Tanjing Enim).Prosiding Seminar Nasional AvoER ke 3: Palembang.
Azizi, M.A., Kramadibrata, S., Wattimena, R., Sidi, I.D. 2012. Probabilistic
Analysis of Physical Models Slope Failure. Elsevier: International
Symposium on Earth Science and Technology CINEST 2012.
Autralian Standard. 2005. Technical Memorandum for Geotechnical Mapping :
Queensland.
Biantoro, E., Muritno, B.P., Mamuaya, J.M.B. 1992. Inversion Faults as The
Major Structural Control in the Northern Part of The Kutai Basin, East
Kalimantan.Proceedings Indonesian Petroleum Association, 21st Annual
Convention and Exhibition, October 1992, p.45-46.
Bieniawski, Z.T. 1989. Engineering rock mass classification. John Wiley
Interscience: New York.
Bowles, J.E. 1984. Physical and Geotechnical Properties of Soil: Second Edition .
McGraw-Hill: New York, USA.
Brady, B.H.G and Brown, E.T. 2004. Rock Mechanics for Underground Mining
Third Edition. Kluwer Academic Publishers: Boston, USA.
Deere, D.U. 1963. Technical Description of Rock Cores for Engineering
Purposes. Felsmechanik und Ingenieurgeologie (Rock Mechanics and
Engineering Geology), 1(1). 16-22.
Geo-Slope International Ltd. 2007. Stability Modelling with Slope/w 2007
version-An Engineering Methodology First edition . Geo-Slope International
Ltd: Canada.
Hoek, E and Bray, J.W. 1981. Rock Slope Engineering. The Institution of Mining
and Metallurgy. 3rd edition : London.
Hoek, E and Brown, E.T. 1980. Empirical Strength Criterion for Rock Masses.
Journal of the Geotechnical Engineering Division: Proceedings of
American Society of Civil Engineers, Vol. 106.
Hoek, E and Brown, E.T. 1997. Technical Note Practical Estimates of Rock Mass
Strength. Elsevier: International Journal Rock Mechanics and Mining
Sciences Vol 34, No 8 pages 1165-1186.
Hoek,E., Torres, C.C., Corkum, B. 2002. Hoek Brown Criteria Failure Criteria
2002. NARMS-TAC Conference: Toronto.
Hoek, E., Carter, T.G., Diedrichs, M.S. 2013. Quantification of Geological
Strength Index Chart. Proceedings of 47th Geomechanic Symposium: San
Fransisco.
Hoek, E., Kaiser, PK., Bawden, W.F. 1995. Support of Underground Excavations
in Hard Rock. Balkema: Rotterdam.
Hoek, E and Karzulovic, A. 2000. Rock Mass Properties for Surface Mines. Slope
Stability in Surface Mining Conference: Society for Mining, Metallurgical
and Exploration 2000 p 59-70
Hoek, E and Marinos, P. 2000. GSI: Geologically Friendly Tool for Rock Mass
Strength Estimation.Proceeding of the International Conference
Geotechnical and Geological Engineering: Melbourne.
Hoek, E. 1998. Technical Note Reliability of Hoek-Brown Estimates of Rock
Mass Properties and their impact on Design. Elsevier: International Journal
Rock Mechanics and Mining Sciences Vol 35 No. 1 pp 63-68.
Hoek, E., Read, J., Karzulovic, A., Chen, Z.Y. 2000. Rock Slopes for Civil and
Mining Engineering. Proceeding of the International Conference
Geotechnical and Geological Engineering: Melbourne.
Hoek, E. 2001. Rock Mass Properties for Underground Mines. Publications of the
Underground Mining Methods: Engineering Fundamentals and
International ccase Studies: Colorado.
Hoek, E. 2002. A brief history of the Developmenet of the Hoek Brown failure
Criterion. Rocscience: Toronto.
Hoek, E. 2009. Fundamental of Slope Design. Slope Stability Conference:
Santiago, Chile.
Hoek, E. 2012. Blast Damage Factor D. Rocscience: Toronto.
Hunt R. E.. 2007. Characteristics of Geologic Materials and Formations A Field
Guide for Geotechnical Engineers. Taylor & Francis Group: London.
Jaeger, J.C., Cook, N.G.W., Zimmerman, R.W. 2007. Fundamental of Rock
Mechanics Fourth Edition. Blackwell Publishing: USA.
Krahn, J. 2004. Stability Modelling with Slope/w-An Engineering Methodology
First edition. Geo-Slope International, Ltd: Canada.
Marinos, V., Marinos, P., Hoek, E. 2005. The Geological Strength Index:
Application and Limitation. Springer: Bull Eng Geol Environ (2005) 64: 5565.
Santosa, B., Suprapto, H., Suryadi, H.S. 1998. Mekanika Tanah Lanjutan.
Gunadarma: Jakarta.
Sukardi, Sikumbang. N., Umar, Sunaryo. 1995. Peta Geologi Regional Lembar
Sangatta, skala 1 : 250.000. Pusat Penelitian dan Pengembangan Sumber
Daya Geologi: Jakarta.
Swana, G.W., Muslim, D., Sophian, I. 2012. Desain Lereng Final Dengan Metode
RMR, SMR dan Analisis Kestabilan Lereng:Pada Tambang Batubara
Terbuka, Kabupaten Tanah Laut, Kalimantan Selatan. Buletin Sumber Daya
Geologi Volume 7 Nomor 2:Bandung.
Wyllie, D.C and Mah, C.W. 2004. Rock Slope Engineering Civil and Mining 4th
Edition. Spon Press Taylor and Francis Group: London.
Zakaria, Z. 2011. Analisis Kestabilan Lereng. Jurusan Teknik Geologi Universitas
Padjajaran: Bandung.