Pengaruh Perbedaan Tekanan Terhadap Proses Pemolingan Bahan Piezoelektrik PbZr0,52Ti0,48O3 Dengan Penambahan Polyvinylidine Flouride

DAFTAR PUSTAKA

Ahda, S. 2013. Sintesa Bahan Piezoelektrik PZT dan BNT-BT-BKT (Bebas Pb)
pada Komposisi Daerah Morphotropic Phase Boundary dengan
Menggunakan Metode Solid State Reaction. Serpong: PTBIN-BATAN.
Ahda, S dan Mardiyanto. 2007. Pola Difraksi Sinar-X Produk Sintesa Bahan
Piezoelektrik PZT dengan Metode Solid State Reaction . Serpong: PTBINBATAN.
A.D. Li, C.L. Mak, K.H. Wong, Q.Y. Shao, Y.J. Wang, D. Wu, dan Naiben Ming.
2001. Thickness-dependent Structural Characteristics of Sol–Gel-Derived
Epitaxial (PbZr)TiO3 Films using Inorganic Zirconium Salt . Elsevier. 235:
307-312.
Babu, S., Devendra Singh, and Anil Govindan. 2011. Electrical Properties of
Calcium Modified PZT System. Ceramics. 2: 2229-4333.
Baset, et al. 2011. Morphotroic Phase Boundary in Ferroelectric Material .
Senangor: University Technology Mara.
Callister, Jr.W.D. 1994. Materials Science and Engineering an Introduction. 3rd
Ed., John Wiley and Sons, Inc., New York.,pp. 434-784, 623-633.
Calton. 2009. Metal Powder Processing manufacturing
Angineering. Gorgia Institute of Technology.

Proceses


and

Cherdhirunkorn, B, M.F. smith,S. Limpijumnong, D. A. Hall. 2008. EXAFS Study
on The Site Preference of Mn in Perovskite Structure of PZT Ceramics.
Elsevier. Pp. 727-729.
Chen, J., Tan, X., Jo, W., and Rodel, J. 2009. Temperature dependence of
piezoelectricproperties of high TC Bi(Mg 1/2Ti1/2)O 3-PbTiO 3. J. Appl.
Phys.106: 034109.
Cullity. 1978. Element of X-Ray Difraction. Addison-Wesley pub, Co. Inc.,
Massachusetss.
Damjanovic, D. 2005. Hysteresis in Piezoelectric and Ferroelectric Materials .
The Science of Hysteresis. 3: 346.
Damjanovic, D. 2010. Processing Manufactoring Process and Engineering .31:
423-424.
Dargaville, Tim R., Celina Mathias C., Elliott Julie M, Chaplya Pavel M., D.
Jones Gary, M Mowery Daniel, Assink Roger A., Clough Roger L., Marti

59
Universitas Sumatera Utara


Jeffrey W., 2005. Characterization, Performance and Optimization of
PVDF as a Piezoelectric Film for Advanced Space Mirror Concepts .
Albuquerque. New Mexico 87185 and Livermore: California 94550.
Darmawan, Z. 2011. Struktur Atom dan Kristal Bahan Logam. Malang:
Universitas Brawijaya.
Donglin, X., Meidong Liu, Yike Zeng, dan Churong Li. 2001. Fabrication and
Electrical Properties of Lead Zirconate Titanate Thick Films by The New
Sol– Gel Method. Elsevier. B87. 160-163.
Donnelly, Niall, dkk. 2008. Properties of (1-x) PZT-x Skn Ceramics Sintered at
Low Temperature Using Li2CO3. Journal of the at American Ceramics
Society: Vol 01.
Gupta, S.M. and Viehland, D. 1998. Tetragonal to rhombohedral transformation
in the lead zirconium titanate lead magnesium niobate lead titanate
crystalline solution. J. Appl. Phys.83: 407-14.
Haprido, K. 2014. Pengaruh Penambahan PVDF (Polyvinylidine Floride) Pada
Hasil Pemolingan Bahan Piezoelektrik PbZr(0,52)Ti(0,48)O3 (PZT) yang
Dilengkapi Alat Pemutus Poling. [Skripsi]. Padang: Universitas Andalas,
Program Sarjana.
Hasanudin dan Addy Rachmat. 2010. Isoterm Adsorpsi-Desorpsi dan Porositas

Katalis Ag-TiO2/Zeolit. 7: 17-25.
He, B.B.2009. Particle Size Analysis By Two-demensional XRD . Scotland: Bruker
AXS, Inc.
Heartling, G.H . 1999. Ferroelectric Ceramics: History and Technology. Journal
of the at American Ceramics Society. 82: 797-818.
Hermana, G.N dan Widyastuti. 2014. Pengaruh Komposisi Cu dan Variasi
Tekanan Kompaksi Terhadap Densitas dan Kekerasan pada Komposit WCu untuk Proyektil Peluru dengan Proses Metalurgi Serbuk. Jurnal Teknik
Pomits. 3: 2337-3539.
Iby, A.C. 2012. Studi Awal Proses Pemolingan dan Karakterisasi Sifat Listrik
Bahan Piezoelektrik Ramah Lingkungan (0,95-x) Bi0,5Na0,5TiO30,05Ba0,5TiO3-xBi0,5K0,5TiO3
(BNT-BT-BKT).
[Skripsi].
Padang:
Universitas Andalas, Program Sarjana.
Istiyono, E. 2000. Fisika Zat Padat. Yogyakarta: FMIPA Universitas Negeri
Yogyakarta.
Jaffe, B., Cook W.R., and Jaffe, H. 1971. Piezoelectric ceramics. San Diego:
Academic Press, CA.

60

Universitas Sumatera Utara

Jones and P.A. Thomas. 2002. Investigation of the and phase Transitions in the
Novel A-site Substituted Distorted Perovskit Compound Na 0.5Bi0.5TiO 3.
Acta Crystallogr . B 58 [2] 168-78.
Kim, Sunghwan. 2002. Low Power Energy Harvesting with Peizoelectric
Generator . University of Pittsburgh.
Kittel, C. 2002. Introduction of Solid State Physics. 8th. Ed., John Wiley & Sons,
Inc. United State of America.
Liang, R., Wang-zhong Zhang., Min Gao., Li Wang., Xian-lin Dong. 2013.
Excellent Electrostrictive Properties of Low Temperature Sintered PZT
Ceramics with High Concentration LiBiO 2 Sintering Aid. Ceramics
International. 39: 563–569
Liu, W., Jiang B., and Zhu W. 2000. Self-based Dielectric Bolometer from
Epitaxially Grown Pb(Zr,Ti)O 3 and Lanthanum-doped Pb(Zr,Ti)O 3
multilayered thin films. Applied Physics Letters 77. 7: 1047-1049.
Mclaughlin, Shona Rae. 2008. Fabrication and Properties of Bi0,5Na 0,5TiO3 Based
Ferroelectric Ceramics with Low Levels of B-site Additives. A Thesis of
Doctor of Philosophy. Canada: Queen's University Kingston, Ontario.
Moulson, A.J. and Herbert, J.M. 2003. Electroceramics: materials, properties,

application. Chichester:JohnWiley & Sons Ltd.
Nurhayati. 2008. Reaksi Katalis Oksidasi Stirena Menjadi Benzaldehida. Depok:
FMIPA Universitas Indonesia.
Omar, M.A. 1975. Elementary Solid State Physics Prinsiples and aplication .
London: Addison-Wesley Publishing Company.
Pratapa. 2004. Prinsip-Prinsip Difraksi Sinar-X. Makalah seminar XRD
disampaikan di Padang.
Purwasih, I. 2010. Rancang Bangun Sumber Energi Terbarukan Secara Hybrid
(Kumparan dan Bahan Piezoelektrik PVDF) dengan Memanfaatkan
Cantilever sebagai Penggetar. [Skripsi]. Surakarta: Universitas Sebelas
Maret, Program Sarjana.
Ramlan. 2001. Pengaruh MgO dan Suhu Sintering Terhadap Mikrostruktur dan
Sifat Fisis Keramik BetaAlumina ( " - Al2O3)". [Tesis]. Jakarta:
Universitas Indonesia, Program Magister Ilmu Material.
Richerson, D.W. 1982. Modern Ceramic Engineering. p.217 – 239.
Rodel, J., Jo, W., Seifert,K.T.P., Anton, E., Granzow, T., and Damjanovic, D.
2009. Perpective an the Development of Lead-free Piezoelectric. Ceramic
Society. 92: 1153-1177.

61

Universitas Sumatera Utara

Saputri, W. 2011. Penggunaan Piezoelektrik sebagai Sumber Energi LED Street
Light untuk Penerangan Jalan.
Setyowati, V. A. 2012. Pengaruh Komposisi Sn dan Variasi Tekanan Kompaksi
Terhadap Densitas dan Modulus Elastisitas Pada MMC Pb-Sn untuk Core
Proyektil Peluru dengan Proses Metalurgi Serbuk. [Tugas Akhir].
Surabaya: Institut Teknologi Sepuluh Nopember.
Shin, Dong-Jin., Jeong, Soon-Jong., Seo, Chang-Eui., Cho, Kyung-Ho., and Koh,
Jung-Hyuk. 2015. Multi-layered piezoelectric energy harvesters based on
PZT ceramic actuators. Ceramics. Vol: 41.
Smallman R.E,and R.J. Bishop. 2000. Metalurgi Fisik Modern dan Rekayasa
Material. Jakarta: Erlangga.
Sung-soo R,. and Dang-Hyok Y. 2007. Solid State Syntesis of Nano Sized BaTiO 3
Powder with High Tetragonally. Material Sciences. 42: 7093-7099.
Takafumi, Maida, et al. 2012. Piezoelectric Properties of Li-Doped
(K0,48N0,52)NbO 3 Ceramic Syntesized using Hidrothermik. Derivet KNb 3 and
NaNb3. Fine Powder . Chibi 227-8563. Japan
Triwahyuni, D. 2010. Sintesa dan Karakterisasi Bahan Piezoelektrik
Bi0,5Na0,5TiO3 (BNT) dengan Metode Molten Salt.Serpong: PTBINBATAN.

Van Vlack, Lawrence H. 1995. Ilmu dan Teknologi Bahan. Jakarta: Erlangga.
Yoshioka, Sayoko.1985. Transformation of Aragonite to Calcite Through
Heating. Departement of Earth Sciences, Aichi University of Education,
Kariya and Water Research Institute, Nagoya University, Nagoya.Japan.
Zeffry, R.2015. Pengaruh Temperatur Kalsinasi Terhadap Sifat Fisis Tembaga
Oksida dari Daerah Pinti Kayu Kec. Koto Parik Gadang Di ateh Kabupaten
Solok Selatan.[Skripsi].Padang: Universitas Negeri Padang, Program
Sarjana.

62
Universitas Sumatera Utara