CITE test doesn't comply with section 14.3.3 of the spec
All Fields marked with * are mandatory.
Change Request 131
#:
Assigned OGC 11-047
Document #:
Name: *Hoang Dam
Organization: *ubitech
Email: *hdam@ubitech.com
Document
Name/Version:
*Web Feature Service (WFS) Implementation Specification / 1.1.0
OGC Project
Document:
*04-094
If this is a revision of a previous submission and you have a Change Request Number, then check here:
Enter the CR number here:
Enter the Revsion Number that you are revising here:
Title:
Source:
*CITE test doesn\'t comply with section 14.3.3 of the spec
*http://sourceforge.net/mailarchive/forum.php?thread_name=4D10CA84.6050504%40lat-lon.de&forum_name=deegree-us
Work item
code:
Category:
*
D (Editorial modification)
Reason for *
change:
Implement section 14.3.3 of the spec results in failing the CITE.
Here is the assertion...
\"A KVP parameter value that denotes a bounding box shall
conform to the general syntax specified in subclause 10.2.3. If no CRS
reference is provided, a service-defined default value must be
assumed.\"
However, section 14.3.3 of the spec gives an impression that
EPSG:4326 (WGS84) must be used for BBOX 2-D coordinate system.
Follows are the excerpt of section 14.3.3
\"14.3.3 Bounding box
The bounding box parameter, BBOX, is included in this specification
for convenience as a shorthand representation of the very common a
bounding box filter which would be expressed in much longer form using
XML and the filter encoding described in[3]. A BBOX applies to all
feature types listed in the request.
The KVP encoding for a bounding box is defined in subclause 10.2.3 of
normative reference [15]. The general form of the parameter is:
BBOX=lcc1,lcc2,…,lccN,ucc1,ucc2,…uccN[,crsuri] where lcc means Lower
Corner Coordinate, ucc means Upper Corner Coordinate and crsuri means
the URI reference to the coordinate system being used. This encoding
allows N coordinates for each corner listed in the order of the
optional crsuri. If the crsuri is not specified then the 2-D
coordinates shall be specified using decimal degrees and WGS84 as
described in [15].\"
Summary of *
change:
Either the spec needs to change to match with CITE or CITE needs to change to conform to the spec
Either the spec needs to change to match with CITE or CITE needs to change to conform to the spec
Consequences if
not approved:
Clauses *
affected:
section 14.3.3
Additional
Documents
affected:
Supporting
Documentation:
Comments:
Status:
Assigned To:
Disposition:
Assigned
CITE SC
Referred and Posted
Change Request 131
#:
Assigned OGC 11-047
Document #:
Name: *Hoang Dam
Organization: *ubitech
Email: *hdam@ubitech.com
Document
Name/Version:
*Web Feature Service (WFS) Implementation Specification / 1.1.0
OGC Project
Document:
*04-094
If this is a revision of a previous submission and you have a Change Request Number, then check here:
Enter the CR number here:
Enter the Revsion Number that you are revising here:
Title:
Source:
*CITE test doesn\'t comply with section 14.3.3 of the spec
*http://sourceforge.net/mailarchive/forum.php?thread_name=4D10CA84.6050504%40lat-lon.de&forum_name=deegree-us
Work item
code:
Category:
*
D (Editorial modification)
Reason for *
change:
Implement section 14.3.3 of the spec results in failing the CITE.
Here is the assertion...
\"A KVP parameter value that denotes a bounding box shall
conform to the general syntax specified in subclause 10.2.3. If no CRS
reference is provided, a service-defined default value must be
assumed.\"
However, section 14.3.3 of the spec gives an impression that
EPSG:4326 (WGS84) must be used for BBOX 2-D coordinate system.
Follows are the excerpt of section 14.3.3
\"14.3.3 Bounding box
The bounding box parameter, BBOX, is included in this specification
for convenience as a shorthand representation of the very common a
bounding box filter which would be expressed in much longer form using
XML and the filter encoding described in[3]. A BBOX applies to all
feature types listed in the request.
The KVP encoding for a bounding box is defined in subclause 10.2.3 of
normative reference [15]. The general form of the parameter is:
BBOX=lcc1,lcc2,…,lccN,ucc1,ucc2,…uccN[,crsuri] where lcc means Lower
Corner Coordinate, ucc means Upper Corner Coordinate and crsuri means
the URI reference to the coordinate system being used. This encoding
allows N coordinates for each corner listed in the order of the
optional crsuri. If the crsuri is not specified then the 2-D
coordinates shall be specified using decimal degrees and WGS84 as
described in [15].\"
Summary of *
change:
Either the spec needs to change to match with CITE or CITE needs to change to conform to the spec
Either the spec needs to change to match with CITE or CITE needs to change to conform to the spec
Consequences if
not approved:
Clauses *
affected:
section 14.3.3
Additional
Documents
affected:
Supporting
Documentation:
Comments:
Status:
Assigned To:
Disposition:
Assigned
CITE SC
Referred and Posted