DAFTAR PUSTAKA Perbandingan Kebocoran Tepi Resin Komposit Nanofill Dengan Polimerisasi Sinar Light Cure Dengan Teknik Ramped Dan Pulse Delay.
DAFTAR PUSTAKA
Aguiar, F.H.B., Oliveira, T.R.V., Lima, D.A.N.L., Paulillo, L.A.M.S., Lovadino,
J.R. 2007. Effect of Light Curing Modes and EthanolImmersion Media on
The Susceptibility of a Microhybrid Composite Resin to Staining. J Appl
Oral Sci. 15(2):105-109
Alonso, R., Leonardo, C., Gisele, C., Mario, G., 2009, Association of
Photoactivation Methods and Low Modulus Liners on Marginal Adaptation
of Composite Restoration, Taylor & Francis Health Science Acta
Odontologica Scandinavia , 62:6, 298-304
Albers, H.F. 2002. Tooth-colored Restorative Principles and Techniques. BC
Decker Inc Hamilton : London.
Anusavice, K.J. 2004. Buku Ajar Ilmu Bahan Kedokteran Gigi, Ed: 10. Jakarta:
EGC. 27, 44, 227-232, 237-243.
Arisu, H.D., Eliguzeloglu, E., Uctasli, M.B., Omurlu, H., Turkoz, E. 2009. Effect
of Multiple Consecutive Adhesive Coatings on Microleakage of Class V
Cavities. Eur J Dent, 3:178-184
Bala, O., Uctasli, M., Tuz, M.B. 2005. Hardness of Different Resin-Based
Composites Cured by Halogen or Light Emitting Diod. J Oper Dent, Vol. 30:
69-74.
Bauer, J.G., Benson, J.L., 1984, Microleakage: A Measure of Performance of
Direct Filling Materials, Opdent, 9: 2-9
Braga, R.R., Ferracane, J.L. 2004. Alternatives in PolymerizationContraction
Stress Management. Crit Rev Oral Biol Med. 15(3):176-184.
Bektas, O.O., Hurmuzlu, F., Eren, D. 2012. Effect of The Composite Curing Light
Mode on Polymerization Shrinkage of Resin Composite. Cumhuriyet Dent J .
15(1): 1-6
Burgess, J.O., Walker, M.S.R.,Davidson, J.M. 2002. PosteriorResin-Based
Composite Review Of The Literature. Pediatr Dent.24:465-479.
Cakir, D., Sergent. R., Burgess, J.O. 2007. Polymerization ShrinkageA Clinical
Review.Inside Dentistry.Vol 3(8).
Camargo, Ericson, J., Eduardo, M., Wagner, B., Jaime, A.C., Renata, C.P., 2009,
Composite Depth of Cure Using Four Polymerization Technique, J Appl Oral Sci,
17(5); 446-50
51
52
Casselli, D.S.M., Worschech, C.C., Paulillo, L.A.M.S. and Dias,C.T.D. S.,
2006.Diametral Tensile Strength Of Composite Resins Submitted To
Different Activation Techniques. Braz Oral Res.20(3):214-218
Chan, K.H.S., Mai, Y., Kim, H., Tong, K.C.T., Ng, D. And Hsiao, J.C.M., 2010.
Review: Resin Composite Filling. Materials. 3: 1228-1243.
Craig, R. G., Power, J. M. 2002. Restorative Dental Materials. Ed 11. Toronto,
London: The Mosby co: 212.
Cramer, N.B., Stansbury, J. W., Bowman, C.N. 2011. Recent Advances and
Developments in Composite Dental Restorative Materials. J Dent Res.
90(4):402-416.
Cunha, L.G., Alonso, R.C.B., Souza, E.J.C.de. Neves, A.C.E.C.,Sobrinho, L.C.,
Sinhoreti, M.A. C. 2008. Influence of The Curing Method on the Post
Polymerization Shrinkage Stress of a Composite Resin. J Appl Oral Sci.
16(4):266-70.
Dennison, J.B., Yaman, P., Seir, R. 2000. Effect of Variable Light Intensity on
Composite Shrinkage.J Prosthet Dent. 84(5): 499-505
Donly, K.J., Godoy, F.G. 2002.The Use of Resin-Based Composite in Children.
Pediatr Dent. 24:480-488.
Ferracane, J.L. 2010. Review Resin Composite-State Of The Art. Dental
Materials. 1753: 1-10.
Foroutan, F., Javadpour, J., Khavandi, A., Atai, M. and Rezaie, H.R.
2011.Mechanical Properties of Dental Composite Materials Reinforced With
Micro and Nano-Size Al2o3 Filler Particles. Iranian Journal of Materials
Science & Engineering. 8(2) : 25-33
García, A.H., Lozano, M.A.M., Vila,J.C., Escribano, A.B., and Galve, P. F. 2006.
Composite Resins. A Review of The Materials and Clinical Indications. Med
Oral Patol Oral Cir Bucal.11: E 215-20.
Gladwin, M., Bagby, M., 2004, Clinical Aspects of Dental Materials, Theory,
Practices and Cases, 2ndEd, Philadelphia, 60-71.
Hamouda, I.M., Hagag A.E., Manal F.B., 2011. Microleakage of Nanofilled
Composite Resin Restorative Material. Journal of Biomaterials and
Nanobiotechnology.2: 329-334
52
53
Hegde, M.N., Hegde, P., Malhan, B. 2008. Evaluation of Depth of Cure and
Knoop Hardness in a Dental Composite Photoactivated Using Different
Methods. J Conserv Dent. 11(2): 76–81
Karthick, A., Kaisalam, S., Priya, P.R.G., Shanter, S. 2011. Polymerization
Shrinkage Of Composites A Review. JIADS.Vol 2 :32-36.
Khaled, A.N. 2011. Physical Properties of Dental ResinNanocomposites. Thesis.
The Degree of Master of Philosophy(MPhil) : Faculty of Medical and Human
Sciences : University ofManchester School of Dentistry
Lesage, B.P. 2007. Aesthetic Anterior Composite Restorations: AGuide to Direct
Placement. Dent Clin N Am 51 : 359–378
Lestari, S. 2012. Efek Lama Penyinaran Terhadap Kebocoran Tepi Tumpatan
Resin Komposit Flowable. J.K.G Unej 3:110-113
Lopes, L.G., Franco, E.B., Pereira, J.C., Mondelli, R.F.L. 2008.Effectof LightCuring Units and Activation Mode on Polymerization Shrinkage and
Shrinkage Stress of Composite Resins. J Appl Oral Sci. 16(1):35-42
Malholtra, N., Mala, K., 2010. Light Curing Consideration For Resin Based
Composite Materials A Review Part I. Compendium, Vol. 31(7): 498-508.
Malholtra, N., Mala, K., 2010. Light Curing Consideration For Resin Based
Composite Materials A Review Part II. Compendium, Vol. 31(8): 584-591.
McCabe, J.F., Walls, A.W.G. 2014. Bahan Kedokteran Gigi (Applied Dental
Materials). Ed: 9. Jakarta: EGC. 9-45, 277-301.
Mukuan, T., Abidjulu, J., Wicaksono, D.A. 2013. Gambaran Kebocoran Tepi
Tumpatan Pasca Restorasi Resin Komposit Pada Mahasiswa Program Studi
Kedokteran Gigi Angkatan 2005-2007.Jurnal e-GiGi. 1(2): 115-120.
Nalcaci, A., Salbas, M., Ulusoy, N. 2005. The Effect of Soft Start VS Continous
Light Polymerization on Microleakage In Class II Resin Composite
Restorations. J Adhes Dent. 7: 309-314.
Obici, O.C., Sinhoreti, M.A.C., Sobrinho, L.C., De Goes, M.F., Consani,S. 2004.
Evaluation of Depth of Cure and Knoop Hardnessin a Dental Composite
Photo-activated Using Different Methods. Braz Dent J . 15(3): 199-203
Obici, A.C., Sinhoreti, M.A.C., Sobrinho, L.C., Góes, M.F., Consani, S. 2005.
Evaluation of Mechanical Properties of Z250 Composite Resin Light-Cured
by Different Methods. J. Appl. Oral Sci. Vol.13 no.4: 393-8.
53
54
Price, R.B., Derand, T., Sedarous, M., Andreou, P., loney, R.W. 2000. Effect of
Distance on The Power Density From Two Light Guides. J Esthet Dent. Vol.
12: 320-327.
Powers J.M., Sakaguchi, R.L. 2007.Craig’s Restorative Dental Materials. Ed. 12
St. Louis, MO: Mosby:189-182.
Power, J.M., Wataha, J.C. 2008. Dental Materials Properties and Manipulation.
Ninth Edition. India: Elsevier. 67-78.
Rodrigues Junior, S.A., Zanchi, C.H., De Carvalho, R.V. and Demarco, F.F. 2007.
Flexural Strength and Modulus of Elasticity of Different Types of ResinBased Composites. Braz Oral Res. 21(1):16-21.
Rosa, R.S., Carlos, E.A.B., Eduardo, B., Eduardo, G.M., Hugo, M.S.O., Luciana
H., Luis A.G.P., Roberto H., 2012. Evaluation of Mechanical Properties on
Three nanofilled Composites. Stomatologija, Baltic Dental and Maxillofacial
Journal. 14(4): 126-30
Sakaguchi, R.L., John, M.P. 2012. Craig’s Restorative Dental Materials.
Thirtheenth Edition. USA: Elsevier Mosby.
Sapra, V., Taneja, S., Kumar, M. 2013. Surface Geometri of Various Nanofiller
Composit Using Different Polishing System: a Comparative Study. J Conserv
Dent , 16(6): 559-563
Schneider, L.F.J., Cavalcante, L.M. and Silikas, N. 2010. Shrinkage Stresses
Generated during Resin-Composite Applications: A Review. J Dent
Biomech.131630: 1-15.
Sturdevant C., 2002. Art and Science of Operative Dentistry. A Harcourt Health
Science Company.190-194
Sularsih, Sarianoferni. 2007. Penggunaan Resin Komposit Untuk Mengurangi
Resiko Barodontal. Jurnal Kedokteran Gigi FKG-HUT, Vol. 1.
Van Ende, A., De Munck, J., Van Landuyt, K.L., Poitevin, A., Peumans, M., Van
Meerbeek, B. 2012. Bulk-filling of high C-factor Posterior Cavities: Effect on
Adhesion To Cavity-Bottom Dentin.Dental Materials.(9): 1-9
Van Noort, R., 2007, Introduction to Dental Materials, 3rd ed, Mosby, St.louis,
89-102
Yap, A.U., Soh, M.S., Siow, K.S., 2002, Post-Gel Shrinkage With Pulse
Activation And Soft Start Polymerization, Oper. Dent, 81-7
54
55
Yoshikawa, T., Burrow, M.F., Tagami, U. 2001.The Effects of Bonding System
and Light Curing Method on Reducing Stress of Different C-factor Cavities.J
Adhessive Dent. 3: 177-183.
55
Aguiar, F.H.B., Oliveira, T.R.V., Lima, D.A.N.L., Paulillo, L.A.M.S., Lovadino,
J.R. 2007. Effect of Light Curing Modes and EthanolImmersion Media on
The Susceptibility of a Microhybrid Composite Resin to Staining. J Appl
Oral Sci. 15(2):105-109
Alonso, R., Leonardo, C., Gisele, C., Mario, G., 2009, Association of
Photoactivation Methods and Low Modulus Liners on Marginal Adaptation
of Composite Restoration, Taylor & Francis Health Science Acta
Odontologica Scandinavia , 62:6, 298-304
Albers, H.F. 2002. Tooth-colored Restorative Principles and Techniques. BC
Decker Inc Hamilton : London.
Anusavice, K.J. 2004. Buku Ajar Ilmu Bahan Kedokteran Gigi, Ed: 10. Jakarta:
EGC. 27, 44, 227-232, 237-243.
Arisu, H.D., Eliguzeloglu, E., Uctasli, M.B., Omurlu, H., Turkoz, E. 2009. Effect
of Multiple Consecutive Adhesive Coatings on Microleakage of Class V
Cavities. Eur J Dent, 3:178-184
Bala, O., Uctasli, M., Tuz, M.B. 2005. Hardness of Different Resin-Based
Composites Cured by Halogen or Light Emitting Diod. J Oper Dent, Vol. 30:
69-74.
Bauer, J.G., Benson, J.L., 1984, Microleakage: A Measure of Performance of
Direct Filling Materials, Opdent, 9: 2-9
Braga, R.R., Ferracane, J.L. 2004. Alternatives in PolymerizationContraction
Stress Management. Crit Rev Oral Biol Med. 15(3):176-184.
Bektas, O.O., Hurmuzlu, F., Eren, D. 2012. Effect of The Composite Curing Light
Mode on Polymerization Shrinkage of Resin Composite. Cumhuriyet Dent J .
15(1): 1-6
Burgess, J.O., Walker, M.S.R.,Davidson, J.M. 2002. PosteriorResin-Based
Composite Review Of The Literature. Pediatr Dent.24:465-479.
Cakir, D., Sergent. R., Burgess, J.O. 2007. Polymerization ShrinkageA Clinical
Review.Inside Dentistry.Vol 3(8).
Camargo, Ericson, J., Eduardo, M., Wagner, B., Jaime, A.C., Renata, C.P., 2009,
Composite Depth of Cure Using Four Polymerization Technique, J Appl Oral Sci,
17(5); 446-50
51
52
Casselli, D.S.M., Worschech, C.C., Paulillo, L.A.M.S. and Dias,C.T.D. S.,
2006.Diametral Tensile Strength Of Composite Resins Submitted To
Different Activation Techniques. Braz Oral Res.20(3):214-218
Chan, K.H.S., Mai, Y., Kim, H., Tong, K.C.T., Ng, D. And Hsiao, J.C.M., 2010.
Review: Resin Composite Filling. Materials. 3: 1228-1243.
Craig, R. G., Power, J. M. 2002. Restorative Dental Materials. Ed 11. Toronto,
London: The Mosby co: 212.
Cramer, N.B., Stansbury, J. W., Bowman, C.N. 2011. Recent Advances and
Developments in Composite Dental Restorative Materials. J Dent Res.
90(4):402-416.
Cunha, L.G., Alonso, R.C.B., Souza, E.J.C.de. Neves, A.C.E.C.,Sobrinho, L.C.,
Sinhoreti, M.A. C. 2008. Influence of The Curing Method on the Post
Polymerization Shrinkage Stress of a Composite Resin. J Appl Oral Sci.
16(4):266-70.
Dennison, J.B., Yaman, P., Seir, R. 2000. Effect of Variable Light Intensity on
Composite Shrinkage.J Prosthet Dent. 84(5): 499-505
Donly, K.J., Godoy, F.G. 2002.The Use of Resin-Based Composite in Children.
Pediatr Dent. 24:480-488.
Ferracane, J.L. 2010. Review Resin Composite-State Of The Art. Dental
Materials. 1753: 1-10.
Foroutan, F., Javadpour, J., Khavandi, A., Atai, M. and Rezaie, H.R.
2011.Mechanical Properties of Dental Composite Materials Reinforced With
Micro and Nano-Size Al2o3 Filler Particles. Iranian Journal of Materials
Science & Engineering. 8(2) : 25-33
García, A.H., Lozano, M.A.M., Vila,J.C., Escribano, A.B., and Galve, P. F. 2006.
Composite Resins. A Review of The Materials and Clinical Indications. Med
Oral Patol Oral Cir Bucal.11: E 215-20.
Gladwin, M., Bagby, M., 2004, Clinical Aspects of Dental Materials, Theory,
Practices and Cases, 2ndEd, Philadelphia, 60-71.
Hamouda, I.M., Hagag A.E., Manal F.B., 2011. Microleakage of Nanofilled
Composite Resin Restorative Material. Journal of Biomaterials and
Nanobiotechnology.2: 329-334
52
53
Hegde, M.N., Hegde, P., Malhan, B. 2008. Evaluation of Depth of Cure and
Knoop Hardness in a Dental Composite Photoactivated Using Different
Methods. J Conserv Dent. 11(2): 76–81
Karthick, A., Kaisalam, S., Priya, P.R.G., Shanter, S. 2011. Polymerization
Shrinkage Of Composites A Review. JIADS.Vol 2 :32-36.
Khaled, A.N. 2011. Physical Properties of Dental ResinNanocomposites. Thesis.
The Degree of Master of Philosophy(MPhil) : Faculty of Medical and Human
Sciences : University ofManchester School of Dentistry
Lesage, B.P. 2007. Aesthetic Anterior Composite Restorations: AGuide to Direct
Placement. Dent Clin N Am 51 : 359–378
Lestari, S. 2012. Efek Lama Penyinaran Terhadap Kebocoran Tepi Tumpatan
Resin Komposit Flowable. J.K.G Unej 3:110-113
Lopes, L.G., Franco, E.B., Pereira, J.C., Mondelli, R.F.L. 2008.Effectof LightCuring Units and Activation Mode on Polymerization Shrinkage and
Shrinkage Stress of Composite Resins. J Appl Oral Sci. 16(1):35-42
Malholtra, N., Mala, K., 2010. Light Curing Consideration For Resin Based
Composite Materials A Review Part I. Compendium, Vol. 31(7): 498-508.
Malholtra, N., Mala, K., 2010. Light Curing Consideration For Resin Based
Composite Materials A Review Part II. Compendium, Vol. 31(8): 584-591.
McCabe, J.F., Walls, A.W.G. 2014. Bahan Kedokteran Gigi (Applied Dental
Materials). Ed: 9. Jakarta: EGC. 9-45, 277-301.
Mukuan, T., Abidjulu, J., Wicaksono, D.A. 2013. Gambaran Kebocoran Tepi
Tumpatan Pasca Restorasi Resin Komposit Pada Mahasiswa Program Studi
Kedokteran Gigi Angkatan 2005-2007.Jurnal e-GiGi. 1(2): 115-120.
Nalcaci, A., Salbas, M., Ulusoy, N. 2005. The Effect of Soft Start VS Continous
Light Polymerization on Microleakage In Class II Resin Composite
Restorations. J Adhes Dent. 7: 309-314.
Obici, O.C., Sinhoreti, M.A.C., Sobrinho, L.C., De Goes, M.F., Consani,S. 2004.
Evaluation of Depth of Cure and Knoop Hardnessin a Dental Composite
Photo-activated Using Different Methods. Braz Dent J . 15(3): 199-203
Obici, A.C., Sinhoreti, M.A.C., Sobrinho, L.C., Góes, M.F., Consani, S. 2005.
Evaluation of Mechanical Properties of Z250 Composite Resin Light-Cured
by Different Methods. J. Appl. Oral Sci. Vol.13 no.4: 393-8.
53
54
Price, R.B., Derand, T., Sedarous, M., Andreou, P., loney, R.W. 2000. Effect of
Distance on The Power Density From Two Light Guides. J Esthet Dent. Vol.
12: 320-327.
Powers J.M., Sakaguchi, R.L. 2007.Craig’s Restorative Dental Materials. Ed. 12
St. Louis, MO: Mosby:189-182.
Power, J.M., Wataha, J.C. 2008. Dental Materials Properties and Manipulation.
Ninth Edition. India: Elsevier. 67-78.
Rodrigues Junior, S.A., Zanchi, C.H., De Carvalho, R.V. and Demarco, F.F. 2007.
Flexural Strength and Modulus of Elasticity of Different Types of ResinBased Composites. Braz Oral Res. 21(1):16-21.
Rosa, R.S., Carlos, E.A.B., Eduardo, B., Eduardo, G.M., Hugo, M.S.O., Luciana
H., Luis A.G.P., Roberto H., 2012. Evaluation of Mechanical Properties on
Three nanofilled Composites. Stomatologija, Baltic Dental and Maxillofacial
Journal. 14(4): 126-30
Sakaguchi, R.L., John, M.P. 2012. Craig’s Restorative Dental Materials.
Thirtheenth Edition. USA: Elsevier Mosby.
Sapra, V., Taneja, S., Kumar, M. 2013. Surface Geometri of Various Nanofiller
Composit Using Different Polishing System: a Comparative Study. J Conserv
Dent , 16(6): 559-563
Schneider, L.F.J., Cavalcante, L.M. and Silikas, N. 2010. Shrinkage Stresses
Generated during Resin-Composite Applications: A Review. J Dent
Biomech.131630: 1-15.
Sturdevant C., 2002. Art and Science of Operative Dentistry. A Harcourt Health
Science Company.190-194
Sularsih, Sarianoferni. 2007. Penggunaan Resin Komposit Untuk Mengurangi
Resiko Barodontal. Jurnal Kedokteran Gigi FKG-HUT, Vol. 1.
Van Ende, A., De Munck, J., Van Landuyt, K.L., Poitevin, A., Peumans, M., Van
Meerbeek, B. 2012. Bulk-filling of high C-factor Posterior Cavities: Effect on
Adhesion To Cavity-Bottom Dentin.Dental Materials.(9): 1-9
Van Noort, R., 2007, Introduction to Dental Materials, 3rd ed, Mosby, St.louis,
89-102
Yap, A.U., Soh, M.S., Siow, K.S., 2002, Post-Gel Shrinkage With Pulse
Activation And Soft Start Polymerization, Oper. Dent, 81-7
54
55
Yoshikawa, T., Burrow, M.F., Tagami, U. 2001.The Effects of Bonding System
and Light Curing Method on Reducing Stress of Different C-factor Cavities.J
Adhessive Dent. 3: 177-183.
55