Basalt Fabric-Electrospun Nanofiber-Based Composite Laminates.
7/25/2014
Your options ▶
Applied Mechanics and Materials
HOME
PARTICIPANT
Access Status
logged in: I.D.G Ary Subagia
My Account
Log off
My Cart
Full text search...
Advance d Se arch
MAIN THEMES
Home > A pplied Mechanics and Materials > 4th Mechanical and Manufacturing Engineering
Mechanical Science and Engineering IV,
Vol.472
Noise, Vibration and Comfort, Vol.471
Mechanical Engineering, Materials Science
and Civil Engineering II, Vol.470
Main Theme: 4th Mechanical and Manufacturing Engineering
Volumes 465 - 466
doi: 10.4028/www.scientific.net/AMM.465-466
Paper Titles published in this Main Theme:
<
1
...
14
15
16
17
18
...
27
>
Research on Food Packaging Technology,
Vol.469
Paper Title
Research on Material Engineering and
Manufacturing Engineering, Vol.468
Characterization of Nickel-Zinc Ferrite Powder Prepared via Sol-Gel Technique in
between 100 MHz to 2 GHz
Materials Science and Mechanical
Engineering, Vol.467
Chapter 9: New Materials and Advanced Materials
4th Mechanical and Manufacturing
Engineering, Vol.465-466
Abstract: Electromagnetic Interference (EMI) issue is gaining more attention as the
result of proliferation of electrical and electronic devices. In...
Intelligent Materials and Mechatronics, Vol.464
Evolution of Globular Microstructures during Direct Partial Re-Melting Experiment of AISI
D2 Tool Steel
Progress in Mechatronics and Information
Technology, Vol.462-463
Authors: See Khee Yee, Sia C hee Kiong, Zarar bin Mohd Jenu Mohd
Authors: M.N. Mohammed, Mohd Zaidi Omar, Junaidi Syarif, Zainuddin Sajuri, Mohd Shukor
Salleh, Khaled S. Alhawari
Advances in Bionic Engineering, Vol.461
Chapter 9: New Materials and Advanced Materials
Design, Testing and Characteristics of
Mechatronic Devices, Vol.460
Abstract: Steel is a mostly challenging metal to semisolid process because of the high
temperatures implicated and the prospective for surface...
Applied Mechanics and Mechanical
Engineering IV, Vol.459
Investigation in Optimization Process Parameter of CaCu 3 Mn 4 O 12 via Sol-Gel Synthesis
Frontiers of Mechanical Engineering and
Materials Engineering II, Vol.457-458
Chapter 9: New Materials and Advanced Materials
Page
824
829
Authors: A. Nurulhuda, Ali Rafidah, Arshad Azrina, Yacob Suhaila, I.S. Anwar, A.R.M. Warikh
834
Abstract: Due to the disadvantageous of solid state in CaCu 3 Mn 4 O 12 ceramic
processing, the sol gel synthesis has been...
Effect of Mish Metal Cerium Addition on Fluidity of Aluminum Eutectic Silica Alloys - LM6
Authors: M.B.A. Asmael, R. Ahmad, Ali Ourdjini
Chapter 9: New Materials and Advanced Materials
839
Abstract: The evaluation of 0.1 to 1.0% of Ce addition effect on fluidity has been
investigated. The fluidity of LM6 has decreased with the Ce...
A Review: Effect of Sintering Method on the Decomposition of Hydroxyapatite and
Density of Hydroxyapatite Zirconia Composites
Authors: C hee Huan Leong, Andanastuti Muchtar, C .Y. Tan, Masfueh Razali
Chapter 9: New Materials and Advanced Materials
843
Abstract: Hydroxyapatite (HA) is a biomaterial with excellent biocompatibility. However,
the brittleness and low fracture toughness of HA have limited...
Mechanical Properties of Kevlar Reinforcement in Kenaf Composites
Authors: Noor Haznida Bakar, Koay Mei Hyie, Ahmad Safwan Ramlan, Mohd Khalid Hassan,
Aidah Jumahat
Chapter 9: New Materials and Advanced Materials
847
Abstract: The development of high-performance materials made from natural resources
are increasing worldwide in recent years. Natural fibres offer...
Basalt Fabric-Electrospun Nanofiber-Based Composite Laminates
Authors: I.D.G Ary Subagia, Leonard D. Tijing, Yon Jig Kim
Chapter 9: New Materials and Advanced Materials
852
Abstract: This study investigated the influence of electrospun polyurethane mats
containing different contents of carbon nanotubes (CNTs) stacked in...
http://www.scientific.net/AMM.465-466/16
Properties and Survival Rate of all Ceramics Dental Crown: A Review
1/2
7/25/2014
Applied Mechanics and Materials
Properties and Survival Rate of all Ceramics Dental Crown: A Review
Authors: Kai Yuan Theng, Muchtar Andanastuti, Mohamed M. Aboras, Norziha Yahaya,
Mariyam Jamaludin Ghazali
857
Chapter 9: New Materials and Advanced Materials
Abstract: All-ceramic dental crown restoration is popular because it results in better
aesthetic quality than metal alloy restoration. Ceramics also...
Development of the Shape Functions for Fatigue Test Using Digital Image Correlation
Authors: Khoo Sze Wei, Saravanan Karuppanan, Azmi Abdul Wahab
862
Chapter 9: New Materials and Advanced Materials
Abstract: Mechanical failure of a structure or a machine during the regular working
conditions are often related to the fatigue damage. As a...
The Effects of Solution Movement to the Microstructure and Size of Nickel Plating on
Titanium Surface by High Speed Direct Nanocrystalline Plating
Authors: N. Zaimah, M.S. Hussain, L. Masrur
867
Chapter 9: New Materials and Advanced Materials
Abstract: Titanium has been widely used in many field of application due to the low
density, sensitive to corrosion, high mechanical strength and ease...
Showing 151 to 160 of 261 Paper Titles
<
1
...
HELP
14
15
16
17
18
...
27
>
INFORMATION
C O NTAC T US
TER MS & C O NDITIO NS
PO LIC Y AND ETHIC S
Scie ntific.Ne t is a re giste re d brand of Trans Te ch Publications Inc.
© 2014 by Trans Te ch Publications Inc. All R ights R e se rve d
http://www.scientific.net/AMM.465-466/16
2/2
7/22/2014
Basalt Fabric-Electrospun Nanofiber-Based Composite Laminates
Log in
My Cart
Full text search...
Advance d Se arch
PAPER TITLES
Home > A pplied Mechanics and Materials > 4th Mechanical and Manufacturing Engineering > Basalt FabricElectrospun Nanofiber-Based...
Investigation in Optimization Process
Parameter of CaCu3Mn4O12 via Sol-Gel
Synthesis, p.834
Effect of Mish Metal Cerium Addition on
Fluidity of Aluminum Eutectic Silica Alloys LM6, p.839
Paper Title: Basalt Fabric-Electrospun Nanofiber-Based Composite Laminates
Periodical
Applied Mechanics and Materials (Volumes 465 - 466)
Main Theme
4th Mechanical and Manufacturing Engineering
A Review: Effect of Sintering Method on the
Decomposition of Hydroxyapatite and Density
of Hydroxyapatite Zirconia Composites, p.843
Chapter
Chapter 9: New Materials and Advanced Materials
Mechanical Properties of Kevlar
Reinforcement in Kenaf Composites, p.847
Edited by
Al Emran Ismail, Nik Hisyamudin Mohd Nor, Mas Fauzi
Mohd Ali, Rosli Ahmad, Ibrahim Masood, Abdul Latif
Mohd Tobi, Mohammad Fahmi Abdul Ghafir, Musli
Muhammad, Md Saidin Wahab, Badrul Aisham Md
Zain and Waluyo Adi Siswanto
Pages
852-856
DOI
10.4028/www.scientific.net/AMM.465-466.852
Citation
I.D.G Ary Subagia et al., 2013, Applied Mechanics and
Materials, 465-466, 852
Online since
December, 2013
Authors
I.D.G Ary Subagia, Leonard D. Tijing, Yon Jig Kim
Keywords
Basalt Fabrics, Carbon Nanotube (CN), ElectroSpinning, Hybrid Composite, Polyurethane (PU)
Price
US$ 28,-
Basalt Fabric-Electrospun Nanofiber-Based
Composite Laminates, p.852
Properties and Survival Rate of all Ceramics
Dental Crown: A Review, p.857
Development of the Shape Functions for
Fatigue Test Using Digital Image Correlation,
p.862
The Effects of Solution Movement to the
Microstructure and Size of Nickel Plating on
Titanium Surface by High Speed Direct
Nanocrystalline Plating, p.867
Experimental and Theoretical Analysis on
Thermal Conductivity of Fired Clay Bricks
Incorporated with Cigarette Butts, p.872
Share
Abstract
0
Related Articles
View full size
Add to Cart
Comments (0)
This study investigated the influence of electrospun polyurethane mats containing different
contents of carbon nanotubes (CNTs) stacked in between basalt fabric layers to form a
composite laminate. The composite laminate was fabricated using a vacuum-assisted resin
transfer molding (VARTM) process. Flexural test were carried out to investigate the
strength and stiffness of composites for each configuration, while the failure characteristics
were observed using a field emission scanning electron microscopy (FESEM) analysis. The
results showed that flexural strength and stiffness of the hybrid composites with
increasing CNT content in polyurethane (PU) nanofiber were increased by 6.5% and 17.3%,
respectively. Furthermore, the addition of surfactants for the dispersion of CNTs in
nanofibers significantly improved the flexural property of the composite interply basalt
fabric-CNT/PU laminates. This study proved that the use of multi-scale reinforcement fillers
with good and homogeneous dispersion increased the mechanical performance of the
composite.
HELP
INFORMATION
C O NTAC T US
TER MS & C O NDITIO NS
PO LIC Y AND ETHIC S
Scie ntific.Ne t is a re giste re d brand of Trans Te ch Publications Inc.
© 2014 by Trans Te ch Publications Inc. All R ights R e se rve d
http://www.scientific.net/AMM.465-466.852
1/1
7/22/2014
4th Mechanical and Manufacturing Engineering
My eBooks
Search...
Login
Cart is empty
Home > Our library > Applied Mechanics and Materials > 4th Mechanical and Manufacturing
Engineering > ToC
Materials Science Forum
Key Engineering Materials
Solid State Phenomena
Defect and Diffusion Forum
Diffusion Foundations
Table of contents
Periodical: Applied Mechanics and Materials
Volume: 4th Mechanical and Manufacturing Engineering
Papers published in this volume:
Characterization of Nickel-Zinc Ferrite Powder Prepared via Sol-Gel Technique in
between 100 MHz to 2 GHz
See Khee Yee, Sia Chee Kiong, Zarar bin Mohd Jenu Mohd
Applied Mechanics and Materials
Advanced Materials Research
Advances in Science and
Technology
Journal of Nano Research
Journal of Biomimetics, Biomaterials
and Tissue Engineering
Journal of Biomimetics, Biomaterials
and Biomedical Engineering
Journal of Metastable and
Nanocrystalline Materials
Materials Science Foundations
(monograph series)
International Journal of Engineering
Research in Africa
p.824
Evolution of Globular Microstructures during Direct Partial Re-Melting Experiment of
AISI D2 Tool Steel
M.N. Mohammed, Mohd Zaidi Omar, Junaidi Syarif, Zainuddin Sajuri, Mohd Shukor Salleh,
Khaled S. Alhawari
p.829
Investigation in Optimization Process Parameter of CaCu 3Mn 4O12 via Sol-Gel
Synthesis
A. Nurulhuda, Ali Rafidah, Arshad Azrina, Yacob Suhaila, I.S. Anwar, A.R.M. Warikh
p.834
Effect of Mish Metal Cerium Addition on Fluidity of Aluminum Eutectic Silica Alloys LM6
M.B.A. Asmael, R. Ahmad, Ali Ourdjini
p.839
A Review: Effect of Sintering Method on the Decomposition of Hydroxyapatite and
Density of Hydroxyapatite Zirconia Composites
Chee Huan Leong, Andanastuti Muchtar, C.Y. Tan, Masfueh Razali
p.843
Mechanical Properties of Kevlar Reinforcement in Kenaf Composites
Noor Haznida Bakar, Koay Mei Hyie, Ahmad Safwan Ramlan, Mohd Khalid Hassan, Aidah
Jumahat
p.847
Advanced Engineering Forum
Nano Hybrids
Science-Meets-Philosophy Forum
Basalt Fabric-Electrospun Nanofiber-Based Composite Laminates
I.D.G Ary Subagia, Leonard D. Tijing, Yon Jig Kim
p.852
Properties and Survival Rate of all Ceramics Dental Crown: A Review
Kai Yuan Theng, Muchtar Andanastuti, Mohamed M. Aboras, Norziha Yahaya, Mariyam
Jamaludin Ghazali
p.857
Development of the Shape Functions for Fatigue Test Using Digital Image Correlation
Khoo Sze Wei, Saravanan Karuppanan, Azmi Abdul Wahab
p.862
The Effects of Solution Movement to the Microstructure and Size of Nickel Plating on
Titanium Surface by High Speed Direct Nanocrystalline Plating
N. Zaimah, M.S. Hussain, L. Masrur
p.867
>>
Policy and Ethics
1/2
7/22/2014
4th Mechanical and Manufacturing Engineering
© 2014 by Trans Tech Publications Inc. All Rights Reserved
http://www.ttp.net/978-3-03785-933-9/16.html
2/2
Your options ▶
Applied Mechanics and Materials
HOME
PARTICIPANT
Access Status
logged in: I.D.G Ary Subagia
My Account
Log off
My Cart
Full text search...
Advance d Se arch
MAIN THEMES
Home > A pplied Mechanics and Materials > 4th Mechanical and Manufacturing Engineering
Mechanical Science and Engineering IV,
Vol.472
Noise, Vibration and Comfort, Vol.471
Mechanical Engineering, Materials Science
and Civil Engineering II, Vol.470
Main Theme: 4th Mechanical and Manufacturing Engineering
Volumes 465 - 466
doi: 10.4028/www.scientific.net/AMM.465-466
Paper Titles published in this Main Theme:
<
1
...
14
15
16
17
18
...
27
>
Research on Food Packaging Technology,
Vol.469
Paper Title
Research on Material Engineering and
Manufacturing Engineering, Vol.468
Characterization of Nickel-Zinc Ferrite Powder Prepared via Sol-Gel Technique in
between 100 MHz to 2 GHz
Materials Science and Mechanical
Engineering, Vol.467
Chapter 9: New Materials and Advanced Materials
4th Mechanical and Manufacturing
Engineering, Vol.465-466
Abstract: Electromagnetic Interference (EMI) issue is gaining more attention as the
result of proliferation of electrical and electronic devices. In...
Intelligent Materials and Mechatronics, Vol.464
Evolution of Globular Microstructures during Direct Partial Re-Melting Experiment of AISI
D2 Tool Steel
Progress in Mechatronics and Information
Technology, Vol.462-463
Authors: See Khee Yee, Sia C hee Kiong, Zarar bin Mohd Jenu Mohd
Authors: M.N. Mohammed, Mohd Zaidi Omar, Junaidi Syarif, Zainuddin Sajuri, Mohd Shukor
Salleh, Khaled S. Alhawari
Advances in Bionic Engineering, Vol.461
Chapter 9: New Materials and Advanced Materials
Design, Testing and Characteristics of
Mechatronic Devices, Vol.460
Abstract: Steel is a mostly challenging metal to semisolid process because of the high
temperatures implicated and the prospective for surface...
Applied Mechanics and Mechanical
Engineering IV, Vol.459
Investigation in Optimization Process Parameter of CaCu 3 Mn 4 O 12 via Sol-Gel Synthesis
Frontiers of Mechanical Engineering and
Materials Engineering II, Vol.457-458
Chapter 9: New Materials and Advanced Materials
Page
824
829
Authors: A. Nurulhuda, Ali Rafidah, Arshad Azrina, Yacob Suhaila, I.S. Anwar, A.R.M. Warikh
834
Abstract: Due to the disadvantageous of solid state in CaCu 3 Mn 4 O 12 ceramic
processing, the sol gel synthesis has been...
Effect of Mish Metal Cerium Addition on Fluidity of Aluminum Eutectic Silica Alloys - LM6
Authors: M.B.A. Asmael, R. Ahmad, Ali Ourdjini
Chapter 9: New Materials and Advanced Materials
839
Abstract: The evaluation of 0.1 to 1.0% of Ce addition effect on fluidity has been
investigated. The fluidity of LM6 has decreased with the Ce...
A Review: Effect of Sintering Method on the Decomposition of Hydroxyapatite and
Density of Hydroxyapatite Zirconia Composites
Authors: C hee Huan Leong, Andanastuti Muchtar, C .Y. Tan, Masfueh Razali
Chapter 9: New Materials and Advanced Materials
843
Abstract: Hydroxyapatite (HA) is a biomaterial with excellent biocompatibility. However,
the brittleness and low fracture toughness of HA have limited...
Mechanical Properties of Kevlar Reinforcement in Kenaf Composites
Authors: Noor Haznida Bakar, Koay Mei Hyie, Ahmad Safwan Ramlan, Mohd Khalid Hassan,
Aidah Jumahat
Chapter 9: New Materials and Advanced Materials
847
Abstract: The development of high-performance materials made from natural resources
are increasing worldwide in recent years. Natural fibres offer...
Basalt Fabric-Electrospun Nanofiber-Based Composite Laminates
Authors: I.D.G Ary Subagia, Leonard D. Tijing, Yon Jig Kim
Chapter 9: New Materials and Advanced Materials
852
Abstract: This study investigated the influence of electrospun polyurethane mats
containing different contents of carbon nanotubes (CNTs) stacked in...
http://www.scientific.net/AMM.465-466/16
Properties and Survival Rate of all Ceramics Dental Crown: A Review
1/2
7/25/2014
Applied Mechanics and Materials
Properties and Survival Rate of all Ceramics Dental Crown: A Review
Authors: Kai Yuan Theng, Muchtar Andanastuti, Mohamed M. Aboras, Norziha Yahaya,
Mariyam Jamaludin Ghazali
857
Chapter 9: New Materials and Advanced Materials
Abstract: All-ceramic dental crown restoration is popular because it results in better
aesthetic quality than metal alloy restoration. Ceramics also...
Development of the Shape Functions for Fatigue Test Using Digital Image Correlation
Authors: Khoo Sze Wei, Saravanan Karuppanan, Azmi Abdul Wahab
862
Chapter 9: New Materials and Advanced Materials
Abstract: Mechanical failure of a structure or a machine during the regular working
conditions are often related to the fatigue damage. As a...
The Effects of Solution Movement to the Microstructure and Size of Nickel Plating on
Titanium Surface by High Speed Direct Nanocrystalline Plating
Authors: N. Zaimah, M.S. Hussain, L. Masrur
867
Chapter 9: New Materials and Advanced Materials
Abstract: Titanium has been widely used in many field of application due to the low
density, sensitive to corrosion, high mechanical strength and ease...
Showing 151 to 160 of 261 Paper Titles
<
1
...
HELP
14
15
16
17
18
...
27
>
INFORMATION
C O NTAC T US
TER MS & C O NDITIO NS
PO LIC Y AND ETHIC S
Scie ntific.Ne t is a re giste re d brand of Trans Te ch Publications Inc.
© 2014 by Trans Te ch Publications Inc. All R ights R e se rve d
http://www.scientific.net/AMM.465-466/16
2/2
7/22/2014
Basalt Fabric-Electrospun Nanofiber-Based Composite Laminates
Log in
My Cart
Full text search...
Advance d Se arch
PAPER TITLES
Home > A pplied Mechanics and Materials > 4th Mechanical and Manufacturing Engineering > Basalt FabricElectrospun Nanofiber-Based...
Investigation in Optimization Process
Parameter of CaCu3Mn4O12 via Sol-Gel
Synthesis, p.834
Effect of Mish Metal Cerium Addition on
Fluidity of Aluminum Eutectic Silica Alloys LM6, p.839
Paper Title: Basalt Fabric-Electrospun Nanofiber-Based Composite Laminates
Periodical
Applied Mechanics and Materials (Volumes 465 - 466)
Main Theme
4th Mechanical and Manufacturing Engineering
A Review: Effect of Sintering Method on the
Decomposition of Hydroxyapatite and Density
of Hydroxyapatite Zirconia Composites, p.843
Chapter
Chapter 9: New Materials and Advanced Materials
Mechanical Properties of Kevlar
Reinforcement in Kenaf Composites, p.847
Edited by
Al Emran Ismail, Nik Hisyamudin Mohd Nor, Mas Fauzi
Mohd Ali, Rosli Ahmad, Ibrahim Masood, Abdul Latif
Mohd Tobi, Mohammad Fahmi Abdul Ghafir, Musli
Muhammad, Md Saidin Wahab, Badrul Aisham Md
Zain and Waluyo Adi Siswanto
Pages
852-856
DOI
10.4028/www.scientific.net/AMM.465-466.852
Citation
I.D.G Ary Subagia et al., 2013, Applied Mechanics and
Materials, 465-466, 852
Online since
December, 2013
Authors
I.D.G Ary Subagia, Leonard D. Tijing, Yon Jig Kim
Keywords
Basalt Fabrics, Carbon Nanotube (CN), ElectroSpinning, Hybrid Composite, Polyurethane (PU)
Price
US$ 28,-
Basalt Fabric-Electrospun Nanofiber-Based
Composite Laminates, p.852
Properties and Survival Rate of all Ceramics
Dental Crown: A Review, p.857
Development of the Shape Functions for
Fatigue Test Using Digital Image Correlation,
p.862
The Effects of Solution Movement to the
Microstructure and Size of Nickel Plating on
Titanium Surface by High Speed Direct
Nanocrystalline Plating, p.867
Experimental and Theoretical Analysis on
Thermal Conductivity of Fired Clay Bricks
Incorporated with Cigarette Butts, p.872
Share
Abstract
0
Related Articles
View full size
Add to Cart
Comments (0)
This study investigated the influence of electrospun polyurethane mats containing different
contents of carbon nanotubes (CNTs) stacked in between basalt fabric layers to form a
composite laminate. The composite laminate was fabricated using a vacuum-assisted resin
transfer molding (VARTM) process. Flexural test were carried out to investigate the
strength and stiffness of composites for each configuration, while the failure characteristics
were observed using a field emission scanning electron microscopy (FESEM) analysis. The
results showed that flexural strength and stiffness of the hybrid composites with
increasing CNT content in polyurethane (PU) nanofiber were increased by 6.5% and 17.3%,
respectively. Furthermore, the addition of surfactants for the dispersion of CNTs in
nanofibers significantly improved the flexural property of the composite interply basalt
fabric-CNT/PU laminates. This study proved that the use of multi-scale reinforcement fillers
with good and homogeneous dispersion increased the mechanical performance of the
composite.
HELP
INFORMATION
C O NTAC T US
TER MS & C O NDITIO NS
PO LIC Y AND ETHIC S
Scie ntific.Ne t is a re giste re d brand of Trans Te ch Publications Inc.
© 2014 by Trans Te ch Publications Inc. All R ights R e se rve d
http://www.scientific.net/AMM.465-466.852
1/1
7/22/2014
4th Mechanical and Manufacturing Engineering
My eBooks
Search...
Login
Cart is empty
Home > Our library > Applied Mechanics and Materials > 4th Mechanical and Manufacturing
Engineering > ToC
Materials Science Forum
Key Engineering Materials
Solid State Phenomena
Defect and Diffusion Forum
Diffusion Foundations
Table of contents
Periodical: Applied Mechanics and Materials
Volume: 4th Mechanical and Manufacturing Engineering
Papers published in this volume:
Characterization of Nickel-Zinc Ferrite Powder Prepared via Sol-Gel Technique in
between 100 MHz to 2 GHz
See Khee Yee, Sia Chee Kiong, Zarar bin Mohd Jenu Mohd
Applied Mechanics and Materials
Advanced Materials Research
Advances in Science and
Technology
Journal of Nano Research
Journal of Biomimetics, Biomaterials
and Tissue Engineering
Journal of Biomimetics, Biomaterials
and Biomedical Engineering
Journal of Metastable and
Nanocrystalline Materials
Materials Science Foundations
(monograph series)
International Journal of Engineering
Research in Africa
p.824
Evolution of Globular Microstructures during Direct Partial Re-Melting Experiment of
AISI D2 Tool Steel
M.N. Mohammed, Mohd Zaidi Omar, Junaidi Syarif, Zainuddin Sajuri, Mohd Shukor Salleh,
Khaled S. Alhawari
p.829
Investigation in Optimization Process Parameter of CaCu 3Mn 4O12 via Sol-Gel
Synthesis
A. Nurulhuda, Ali Rafidah, Arshad Azrina, Yacob Suhaila, I.S. Anwar, A.R.M. Warikh
p.834
Effect of Mish Metal Cerium Addition on Fluidity of Aluminum Eutectic Silica Alloys LM6
M.B.A. Asmael, R. Ahmad, Ali Ourdjini
p.839
A Review: Effect of Sintering Method on the Decomposition of Hydroxyapatite and
Density of Hydroxyapatite Zirconia Composites
Chee Huan Leong, Andanastuti Muchtar, C.Y. Tan, Masfueh Razali
p.843
Mechanical Properties of Kevlar Reinforcement in Kenaf Composites
Noor Haznida Bakar, Koay Mei Hyie, Ahmad Safwan Ramlan, Mohd Khalid Hassan, Aidah
Jumahat
p.847
Advanced Engineering Forum
Nano Hybrids
Science-Meets-Philosophy Forum
Basalt Fabric-Electrospun Nanofiber-Based Composite Laminates
I.D.G Ary Subagia, Leonard D. Tijing, Yon Jig Kim
p.852
Properties and Survival Rate of all Ceramics Dental Crown: A Review
Kai Yuan Theng, Muchtar Andanastuti, Mohamed M. Aboras, Norziha Yahaya, Mariyam
Jamaludin Ghazali
p.857
Development of the Shape Functions for Fatigue Test Using Digital Image Correlation
Khoo Sze Wei, Saravanan Karuppanan, Azmi Abdul Wahab
p.862
The Effects of Solution Movement to the Microstructure and Size of Nickel Plating on
Titanium Surface by High Speed Direct Nanocrystalline Plating
N. Zaimah, M.S. Hussain, L. Masrur
p.867
>>
Policy and Ethics
1/2
7/22/2014
4th Mechanical and Manufacturing Engineering
© 2014 by Trans Tech Publications Inc. All Rights Reserved
http://www.ttp.net/978-3-03785-933-9/16.html
2/2