Karakterisasi Umur Pahat Pada Pembubutan Kering Dan Keras Baja AISI 1045 Menggunakan Pahat Karbida CVD Berlapis

DAFTAR PUSTAKA
[1]A. J. de, Oliveira, A. E., Diniz and Ursolino, D. J. 2009. Hard Turning in
Continuous and interrupted cut with PCBN and Whisker-Reinforced
Cutting Tools. Journal of Materials Processing Technology 209, pp
5262-5270.
[2]A. S., More, Jiang, W., Brown, W.D., and Malshe, A.P., 2006. Tool Wear and
Machining Performance of CBN TiN Coated Carbide Inserts and
PCBN Compact Inserts in Turning AISI 4340 Hardened Steel. Journal
of materials Processing Technology 180, pp. 253-262.
[3]A. Schey, John. 2009. Process Manufaktur, Edisi ketiga. Diterjemahkan oleh:
Rines, Indah Sri Utami dan Basuki Heri Winarno. Yogyakarta: Penerbit
Andi.
[4]Arnell, R.D., Kelly, P.J. and Bradley, J.W. 2004. Recent Developments in
Pulsed Magnetron Sputtering, Surface and Coatings Technology, 188189, p.158
[5]Azom.

2004.

AISI

1045


Medium

Carbon

Steel.

From:

http://www.azom.com/article.aspx?ArticleID=6130. 30 Maret 2016
[6]Bh, Varaprasad, Srinivasa Rao. Ch, P.V. Vinay. 2014. Effect of Machining
Parameters on Tool Wear in Hard Turning of AISI D3 Steel. Procedia
Engineering 97, pp. 338-345.
[7]Black, J.T., and Ronald A.Kohser. 2008. Degarmo’s Materials and Processes
in Manufacturing. Tenth edition. United States of America: John
Willeys and Son Inc.
[8]Boothroyd, G. 1997. Fundamentals of Machining and Machine Tools. Marcel
Dekker. New York.
[9]Daryanto. 2011. Teori Kejuruan Teknik Mesin Perkakas. Bandung: Penerbit
Satu Nusa

[10]Coppini, N.L, A.E. Diniz, M.Bonandi, E.M. De Souza dan E.A. Baptista.
2013. Hard Turning of Sintered Cemented Carbide Parts: A Shop Floor
Experience. Procedia CIRP, Volume 8, pp. 368-373.

xix
Universitas Sumatera Utara

[11]Handawi Saad Elmunafi, Mohamed, M.Y. Noordin, and D. Kurniawan.
2015.Tool Life of Coated Carbide Cutting Tool when Turning
Hardened Stainless Steel under Minimum Quantity Lubricant using
Castor Oil. Procedia Manufacturing 2, pp 563-567
[12] Kalpakjian, Serope and R.Schmid, Steven. 2009. Manufacturing Engineering
and Technology, sixth edition. New York: Prentice Hall.
[13]K. Shihab, Suha, Zahid A. Khan, Aas Mohammad and Arshad Noor
Siddiqueed. RSM Based Study of Cutting Temperature during Hard
Turning with Multilayer Coated Carbide Insert. Procedia Material
Science, pp. 1233-1242.
[14]Labondre, Rajshekhar, Prasad Krishna and Mohankumar G.C. 2013.
Machinability Studies of Low Alloy Steels by Face Turning Method: An
Experimental investigation. Procedia Engineering, pp 632-641.

[15]Rochim, Taufiq. 1993. Teori & Teknologi Proses Permesinan. Bandung:
Penerbit ITB.
[16]Sargade, V.G., Gangopadhyay, S., Paul, S., and Chattopadhyay, A.K. 2011.
Effect of Coating Thickness and Performance of TiN Film Deposited on
Cemented

Carbide

Inserts

Using

CFUBMS.

Material

and

Manufacturing Processes 26, p.1.


xx
Universitas Sumatera Utara