Makalah dalam jurnal terindek1
Makalah dalam jurnal terindeks
BIL
TAJUK ARTIKEL
1
Effect of Copper Addition on
Grain Refinement of Austenite
in Fe-8wt.%Ni-(0.3)wt.%Cu
Alloy.
2
3
4
Effect of Solution Treatment
on Fatigue Crack
Propagation Behavior of
Magnesium Alloy.
Effect of Different Factors on
the Acoustic Absorption of
Coir Fiber
Noise Absorption Properties of
Coir Fiber with Porous Layer
Facing
NAMA PENGARANG
UTAMA
J. Syarif and Z. Sajuri.
M.A.M. Daud, Z. Sajuri,
J. Syarif and M.Z. Omar.
Mohd Jailani Mohd
Nor, Md. Ayub, Rozli
Zulkifli, Nowshad Amin
and Mohammad
Hosseini Fouladi
Rozli Zulkifli, Zulkarnain,
Mohd Jailani Mohd Nor
TAHUN
DITERBITKAN
2010
NAMA JURNAL
Sains Malaysiana
39(6): 999-1006.
JENIS INDEKS
(ISI/SCOPUS)
ISI/Scopus
2010
International
Review of
Mechanical
Engineering 4(3):
238-243
Scopus
2010
Journal of
Applied Sciences,
Vol.10(22):28872892
Scopus
2010
International
Review of
Mechanical
Engineering,
4(4):405-409
Scopus
5
Interfacial Treatment of MultiLayer Woven Silk/Epoxy
Composites.
Rozli Zulkifli & Che
Husna Azhari.
2010
International
Review of
Mechanical
Engineering,
Scopus
Vol. 4(1), pp. 1-6.
Noise Control Using Coconut
Coir Fiber Sound Absorber
with Porous Layer Backing
and Perforated Panel
Rozli Zulkifli, Zulkarnain
and Mohd Jailani
Mohd Nor
7
Fabrication of Dense
Composite Ceramic
Electrolyte SDC-(Li/Na)2CO3”,
Jarot Raharjo,
Andanastuti Muchtar,
Wan Ramli Wan Daud,
Norhamidi Muhamad
and Edy Heryanto
Majlan.
8
Pencirian Titanium Berbusa
yang Dihasilkan pada Suhu
Pensinteran yang Berbeza
Menggunakan Kaedah
Buburan (Characterisation of
Titanium Foams Sintered at
Different Temperatures
Prepared by the Slurry
Method)
S. Ahmad, N.
Muhamad, A. Muchtar,
J. Sahari, K. R.
Jamaludin, M. H. I.
Ibrahim, N. H.
Mohamad Nor, &
Murtadhahadi
6
2010
American Journal
of Applied
Sciences,
Scopus
Vol. 7(2), pp. 260264
2010
Key Engineering
Materials, 447448:666-670.
Scopus
2010
Sains Malaysiana
39(1)(2010): 77–
82.
ISI
9
10
11
12
Epoxidized Natural Rubber–
Alumina Nanoparticle
Composites: Optimization of
Mixer Parameters via
Response Surface
Methodology.
Noraiham Mohamad,
Andanastuti Muchtar,
Mariyam Jameelah
Ghazali, Dahlan HJ.
Mohd, Che Husna
Azhari
Correlation of filler loading
and silane coupling agent on
the physical characteristics of
epoxidized natural rubberalumina nanoparticles
composites.
Noraiham Mohamad,
Andanastuti Muchtar,
Mariyam Jameelah
Ghazali, Dahlan Hj.
Mohd and Che Husna
Azhari.
Dry sliding wear behaviour of
Al-12Si-4Mg alloy with cerium
addition
S. Anasyida, A.R. Daud,
M.J. Ghazali
Effects of calcium
supplements on fracture
healing in a rat osteoporotic
model
Ahmad Nazrun Shuid,
Sharlina Mohamad,
Norazlina Mohamed,
Fazalina Mohd
Fadzilah, Sabarul Afian
Mokhtar, Shahrum
Abdullah, Faizah
Othman, Farihah
Suhaimi, Norliza
2010
2010
Journal of
Applied Polymer
Science, Vol. 115,
183–189 (2010).
Journal of
Elastomers and
Plastics,
ISI & Scopus
ISI & Scopus
Vol. 42(4):331-346
2010
Materials and
Design (31): 365–
374
2010
Journal of
Orthopaedic
Research,
28(12):1651-1656.
ISI
ISI & Scopus
Mohamed, Ima
Nirwana Soelaiman.
13
Modelling of Corelation
Between Heat Treatment and
Mechanical Properties of Ti6Al-4V Alloy Using Feed
Forward Back Propagation
Neural Network
J. Syarif, D.Y. Pratama
and R. Ramli
14
Direct Partial Remelting of
XW-42 Steel in Semi Solid
Zone,
15
16
2010
ISIJ International,
50(11), pp 1689 1694
ISI
A. Alfian, M.Z. Omar, J.
Syarif and Z. Sajuri.
2010
J. Applied
Sciences, 10(13,
pp. 1255-1262.
Scopus
Fatigue crack growth
simulation of aluminium alloy
under spectrum loadings
S. M. Beden, S.
Abdullah, A. K. Ariffin,
N. A. Al-Asady.
2010
Materials and
Design. 31(2010)
3449-3456.
ISI
Disassembly for Reuse:
Implementation in the
Malaysian Automotive
Industry
Go, T.F., Wahab, D.A.,
Ab. Rahman, M.N.,
Ramli, R. and Azhari,
C.H.
2010
Australian Journal
of Basic and
Applied Sciences,
4(10): 4569-4575,
2010
Scopus
17
18
19
20
Effect of Aged AIN
Reinforced Al-Si Alloys on Dry
Sliding Wear Behaviour
Online Cutting Tool Wear
Monitoring using I-kaz Method
and New Regression Model
Analysis of pulse air jet flow
profiles
Effect of filler loading
concentration, curing
temperature and molding
pressure on the electrical
conductivity of
CNTs/Graphite/ Epoxy
nanocomposites at high
Mariyam Jameelah
Ghazali, Mahamad
Noor Wahab,
Abdul Razak Daud and
Jaharah Ab. Ghani,
Jaharah A. Ghani,
Muhammad Rizal,
Mohd Zaki Nuawi, Che
Hassan Che Haron,
Mariyam Jameelah
Ghazali, and Mohd
Nizam Ab Rahman
Rozli Zulkifli,
Kamaruzzaman Sopian,
Shahrir Abdullah &
Mohd Sobri Takriff
Hendra Suherman, Abu
Bakar Sulong, Jaafar
Sahari.
2010
Advanced
Materials
Research,
CISI
126-128:905-910
2010
Advanced
Materials
Research,
CISI
126-128:738-743
2010
International
Review of
Mechanical
Engineering,
Scopus
Vol. 4(5), pp. 495501.
2010
International
Journal of
Mechanical and
Materials
Engineering,
5(1)74-79
Scopus
loading of conductive fillers.
21
Effects of insert nose redius
and machining parameters
on the surface roughness of
stainless steel 316L
Mohd Fazuri Abdullah,
Abu Bakar Sulong,
Ilman Hakimi Chua,
Che Hassan Che
Haron, Jaharah A.
Ghani.
22
Effects of molding parameters
and addition of fillers on gate
chip.
Abu Bakar Sulong, Gan
Tek Keong, Jaafar
Sahari.
23
Electrical conductivity and
flexural strength of
graphite/carbon”.
Hendra Suherman,
Jaafar Sahari, Abu
Bakar Sulong
and Nishata Royan,
24
Electrical conductivity and
micro hardness of synthetic
and natural graphite epoxy
composite.
Hendra Suherman,
Jaafar Sahari, Abu
Bakar Sulong.
2010
Key Engineering
Materials, 447448:51-54
CISI
2010
Key Engineering
Materials, 447448:790-794.
CISI
2010
Key Engineering
Materials, 447448:643-647
CISI
2010
Key Engineering
Materials, 447448:614-618.
CISI
25
Electrophoretic Deposition of
La0.6Sr0.4Co0.2Fe0.8O3-δ Cathode
Film on Stainless Steel
Substrates.
Hamimah
Abd.Rahman,
Andanastuti Muchtar,
Norhamidi Muhamad,
Huda Abdullah, “
26
Optical and structural
properties of ZnS thin films
grown by CBD technique.
Huda Abdullah, Nor
Habibi Saadah,
Sahbudin Shaari,
Andanastuti Muchtar
Optimisation of Processing
Parameters of Titanium Foams
Using Taguchi Method for
Compressive Strength.
Sufizar Ahmad,
Norhamidi Muhamad,
Andanastuti Muchtar,
Jaafar Sahari, K. R.
Jamaludin, M. H. I.
Ibrahim and N.H.
Mohamad Nor.
27
28
29
Sintering Effects on LSCF
Cathodes for Intermediate
Temperature Solid Oxide Fuel
Cells (IT-SOFCs)
Prediction of Mechanical
Properties of Ti-6Al-4V using
Neural Network,
Andanastuti Muchtar,
Noorashrina A. Hamid,
Norhamidi Muhamad,
Wan Ramli Wan Daud,
D.Y. Pratama, Syarif
Junaidi and Ramli R.
2010
Advanced
Materials
Research, 139141:145-148.
CISI
2010
Advanced
Materials
Research, 139141: pp 149-152.
CISI
2010
Key Engineering
Materials, 447448:671-675.
CISI
2010
Advanced
Materials
Research, 139141:141-144
CISI
2010
Advanced
Materials
Research, 89-91,
pp. 443-448.
CISI
30
The Impact damage response
of plain woven natural
silk/epoxy laminated
composite plates
A. U. Ude, A. K. Ariffin,
K. Sopian, A. Arifin and
C. H. Azhari
2010
International
Journal of
Engineering,
Science and
Technology, Vol
2, No 5, pp. 128140.
Scopus
Makalah dalam jurnal tidak terindeks
BIL
TAJUK ARTIKEL
NAMA PENGARANG UTAMA
TAHUN
DITERBITKAN
NAMA JURNAL
1
Effect of EDM Wire Cutting on the
Fatigue Life of the AZ61 Magnesium
Alloy.
M.A.M. Daud, Z. Sajuri, J.
Syarif and M.Z. Omar.
2010
Jurnal Mekanikal.
30: 68-76
2
Preliminary Study of Condition-Based
Monitoring (CBM) on Automotive
Gearbox using Ultrasonic Signals.
2010
World Applied
Sciences Journal,
2010, 9(2): 118126
M.Z. Nuawi, Taib I. Mohamad,
M. F. H. Hussin, S. Abdullah, R.
Zulkifli, M.K. Zakaria,
3
4
Effect of Compression on the Acoustic
Absorption of Coir Fiber
Energy Attentuation Capability of
Woven Natural Silk/Epoxy Composite
Plates Subjected to Drop-Weight
Impacts
Mohd Jailani Mohd Nor, Md.
Ayub, Rozli Zulkifli, Nowshad
Amin and Mohammad
Hosseini Fouladi
Albert Uchenna Ude, Ahmad
Kamal Ariffin, Kamauzzaman
Sopian and Che Husna
Azhari.
2010
American
Journal of
Applied
Sciences,
Vol. 7(9), pp.
1285-1290.
2010
ARP Journal of
Engineering and
Applied
Sciences, Vol 5,
No 8, pp 75-87.
BIL
TAJUK ARTIKEL
1
Effect of Copper Addition on
Grain Refinement of Austenite
in Fe-8wt.%Ni-(0.3)wt.%Cu
Alloy.
2
3
4
Effect of Solution Treatment
on Fatigue Crack
Propagation Behavior of
Magnesium Alloy.
Effect of Different Factors on
the Acoustic Absorption of
Coir Fiber
Noise Absorption Properties of
Coir Fiber with Porous Layer
Facing
NAMA PENGARANG
UTAMA
J. Syarif and Z. Sajuri.
M.A.M. Daud, Z. Sajuri,
J. Syarif and M.Z. Omar.
Mohd Jailani Mohd
Nor, Md. Ayub, Rozli
Zulkifli, Nowshad Amin
and Mohammad
Hosseini Fouladi
Rozli Zulkifli, Zulkarnain,
Mohd Jailani Mohd Nor
TAHUN
DITERBITKAN
2010
NAMA JURNAL
Sains Malaysiana
39(6): 999-1006.
JENIS INDEKS
(ISI/SCOPUS)
ISI/Scopus
2010
International
Review of
Mechanical
Engineering 4(3):
238-243
Scopus
2010
Journal of
Applied Sciences,
Vol.10(22):28872892
Scopus
2010
International
Review of
Mechanical
Engineering,
4(4):405-409
Scopus
5
Interfacial Treatment of MultiLayer Woven Silk/Epoxy
Composites.
Rozli Zulkifli & Che
Husna Azhari.
2010
International
Review of
Mechanical
Engineering,
Scopus
Vol. 4(1), pp. 1-6.
Noise Control Using Coconut
Coir Fiber Sound Absorber
with Porous Layer Backing
and Perforated Panel
Rozli Zulkifli, Zulkarnain
and Mohd Jailani
Mohd Nor
7
Fabrication of Dense
Composite Ceramic
Electrolyte SDC-(Li/Na)2CO3”,
Jarot Raharjo,
Andanastuti Muchtar,
Wan Ramli Wan Daud,
Norhamidi Muhamad
and Edy Heryanto
Majlan.
8
Pencirian Titanium Berbusa
yang Dihasilkan pada Suhu
Pensinteran yang Berbeza
Menggunakan Kaedah
Buburan (Characterisation of
Titanium Foams Sintered at
Different Temperatures
Prepared by the Slurry
Method)
S. Ahmad, N.
Muhamad, A. Muchtar,
J. Sahari, K. R.
Jamaludin, M. H. I.
Ibrahim, N. H.
Mohamad Nor, &
Murtadhahadi
6
2010
American Journal
of Applied
Sciences,
Scopus
Vol. 7(2), pp. 260264
2010
Key Engineering
Materials, 447448:666-670.
Scopus
2010
Sains Malaysiana
39(1)(2010): 77–
82.
ISI
9
10
11
12
Epoxidized Natural Rubber–
Alumina Nanoparticle
Composites: Optimization of
Mixer Parameters via
Response Surface
Methodology.
Noraiham Mohamad,
Andanastuti Muchtar,
Mariyam Jameelah
Ghazali, Dahlan HJ.
Mohd, Che Husna
Azhari
Correlation of filler loading
and silane coupling agent on
the physical characteristics of
epoxidized natural rubberalumina nanoparticles
composites.
Noraiham Mohamad,
Andanastuti Muchtar,
Mariyam Jameelah
Ghazali, Dahlan Hj.
Mohd and Che Husna
Azhari.
Dry sliding wear behaviour of
Al-12Si-4Mg alloy with cerium
addition
S. Anasyida, A.R. Daud,
M.J. Ghazali
Effects of calcium
supplements on fracture
healing in a rat osteoporotic
model
Ahmad Nazrun Shuid,
Sharlina Mohamad,
Norazlina Mohamed,
Fazalina Mohd
Fadzilah, Sabarul Afian
Mokhtar, Shahrum
Abdullah, Faizah
Othman, Farihah
Suhaimi, Norliza
2010
2010
Journal of
Applied Polymer
Science, Vol. 115,
183–189 (2010).
Journal of
Elastomers and
Plastics,
ISI & Scopus
ISI & Scopus
Vol. 42(4):331-346
2010
Materials and
Design (31): 365–
374
2010
Journal of
Orthopaedic
Research,
28(12):1651-1656.
ISI
ISI & Scopus
Mohamed, Ima
Nirwana Soelaiman.
13
Modelling of Corelation
Between Heat Treatment and
Mechanical Properties of Ti6Al-4V Alloy Using Feed
Forward Back Propagation
Neural Network
J. Syarif, D.Y. Pratama
and R. Ramli
14
Direct Partial Remelting of
XW-42 Steel in Semi Solid
Zone,
15
16
2010
ISIJ International,
50(11), pp 1689 1694
ISI
A. Alfian, M.Z. Omar, J.
Syarif and Z. Sajuri.
2010
J. Applied
Sciences, 10(13,
pp. 1255-1262.
Scopus
Fatigue crack growth
simulation of aluminium alloy
under spectrum loadings
S. M. Beden, S.
Abdullah, A. K. Ariffin,
N. A. Al-Asady.
2010
Materials and
Design. 31(2010)
3449-3456.
ISI
Disassembly for Reuse:
Implementation in the
Malaysian Automotive
Industry
Go, T.F., Wahab, D.A.,
Ab. Rahman, M.N.,
Ramli, R. and Azhari,
C.H.
2010
Australian Journal
of Basic and
Applied Sciences,
4(10): 4569-4575,
2010
Scopus
17
18
19
20
Effect of Aged AIN
Reinforced Al-Si Alloys on Dry
Sliding Wear Behaviour
Online Cutting Tool Wear
Monitoring using I-kaz Method
and New Regression Model
Analysis of pulse air jet flow
profiles
Effect of filler loading
concentration, curing
temperature and molding
pressure on the electrical
conductivity of
CNTs/Graphite/ Epoxy
nanocomposites at high
Mariyam Jameelah
Ghazali, Mahamad
Noor Wahab,
Abdul Razak Daud and
Jaharah Ab. Ghani,
Jaharah A. Ghani,
Muhammad Rizal,
Mohd Zaki Nuawi, Che
Hassan Che Haron,
Mariyam Jameelah
Ghazali, and Mohd
Nizam Ab Rahman
Rozli Zulkifli,
Kamaruzzaman Sopian,
Shahrir Abdullah &
Mohd Sobri Takriff
Hendra Suherman, Abu
Bakar Sulong, Jaafar
Sahari.
2010
Advanced
Materials
Research,
CISI
126-128:905-910
2010
Advanced
Materials
Research,
CISI
126-128:738-743
2010
International
Review of
Mechanical
Engineering,
Scopus
Vol. 4(5), pp. 495501.
2010
International
Journal of
Mechanical and
Materials
Engineering,
5(1)74-79
Scopus
loading of conductive fillers.
21
Effects of insert nose redius
and machining parameters
on the surface roughness of
stainless steel 316L
Mohd Fazuri Abdullah,
Abu Bakar Sulong,
Ilman Hakimi Chua,
Che Hassan Che
Haron, Jaharah A.
Ghani.
22
Effects of molding parameters
and addition of fillers on gate
chip.
Abu Bakar Sulong, Gan
Tek Keong, Jaafar
Sahari.
23
Electrical conductivity and
flexural strength of
graphite/carbon”.
Hendra Suherman,
Jaafar Sahari, Abu
Bakar Sulong
and Nishata Royan,
24
Electrical conductivity and
micro hardness of synthetic
and natural graphite epoxy
composite.
Hendra Suherman,
Jaafar Sahari, Abu
Bakar Sulong.
2010
Key Engineering
Materials, 447448:51-54
CISI
2010
Key Engineering
Materials, 447448:790-794.
CISI
2010
Key Engineering
Materials, 447448:643-647
CISI
2010
Key Engineering
Materials, 447448:614-618.
CISI
25
Electrophoretic Deposition of
La0.6Sr0.4Co0.2Fe0.8O3-δ Cathode
Film on Stainless Steel
Substrates.
Hamimah
Abd.Rahman,
Andanastuti Muchtar,
Norhamidi Muhamad,
Huda Abdullah, “
26
Optical and structural
properties of ZnS thin films
grown by CBD technique.
Huda Abdullah, Nor
Habibi Saadah,
Sahbudin Shaari,
Andanastuti Muchtar
Optimisation of Processing
Parameters of Titanium Foams
Using Taguchi Method for
Compressive Strength.
Sufizar Ahmad,
Norhamidi Muhamad,
Andanastuti Muchtar,
Jaafar Sahari, K. R.
Jamaludin, M. H. I.
Ibrahim and N.H.
Mohamad Nor.
27
28
29
Sintering Effects on LSCF
Cathodes for Intermediate
Temperature Solid Oxide Fuel
Cells (IT-SOFCs)
Prediction of Mechanical
Properties of Ti-6Al-4V using
Neural Network,
Andanastuti Muchtar,
Noorashrina A. Hamid,
Norhamidi Muhamad,
Wan Ramli Wan Daud,
D.Y. Pratama, Syarif
Junaidi and Ramli R.
2010
Advanced
Materials
Research, 139141:145-148.
CISI
2010
Advanced
Materials
Research, 139141: pp 149-152.
CISI
2010
Key Engineering
Materials, 447448:671-675.
CISI
2010
Advanced
Materials
Research, 139141:141-144
CISI
2010
Advanced
Materials
Research, 89-91,
pp. 443-448.
CISI
30
The Impact damage response
of plain woven natural
silk/epoxy laminated
composite plates
A. U. Ude, A. K. Ariffin,
K. Sopian, A. Arifin and
C. H. Azhari
2010
International
Journal of
Engineering,
Science and
Technology, Vol
2, No 5, pp. 128140.
Scopus
Makalah dalam jurnal tidak terindeks
BIL
TAJUK ARTIKEL
NAMA PENGARANG UTAMA
TAHUN
DITERBITKAN
NAMA JURNAL
1
Effect of EDM Wire Cutting on the
Fatigue Life of the AZ61 Magnesium
Alloy.
M.A.M. Daud, Z. Sajuri, J.
Syarif and M.Z. Omar.
2010
Jurnal Mekanikal.
30: 68-76
2
Preliminary Study of Condition-Based
Monitoring (CBM) on Automotive
Gearbox using Ultrasonic Signals.
2010
World Applied
Sciences Journal,
2010, 9(2): 118126
M.Z. Nuawi, Taib I. Mohamad,
M. F. H. Hussin, S. Abdullah, R.
Zulkifli, M.K. Zakaria,
3
4
Effect of Compression on the Acoustic
Absorption of Coir Fiber
Energy Attentuation Capability of
Woven Natural Silk/Epoxy Composite
Plates Subjected to Drop-Weight
Impacts
Mohd Jailani Mohd Nor, Md.
Ayub, Rozli Zulkifli, Nowshad
Amin and Mohammad
Hosseini Fouladi
Albert Uchenna Ude, Ahmad
Kamal Ariffin, Kamauzzaman
Sopian and Che Husna
Azhari.
2010
American
Journal of
Applied
Sciences,
Vol. 7(9), pp.
1285-1290.
2010
ARP Journal of
Engineering and
Applied
Sciences, Vol 5,
No 8, pp 75-87.