Biomass Briquette Investigation from Pterocarpus Indicus Leaves Waste as an Alternative Renewable Energy - Scientific Repository
Scopus
Pieview
I
Author details
i
About Scopus Author ldentifier
x
The Scopus Author ldentifier assigns a unique number to groups ofdocuments written by the same author via an
algorithm that matches authorship based on
a certain
criteria. lfa document cannot be confidently matched with an
author identifier, it is grouped separately" In this case, you may see more than one entry for the same author.
1$
Anggono, Willyanto
r
ri
rrir* [l
6-index: @
Followthis Author i
Email
View fi-graph
,
5
View potential author matches
Universitas Kristen Petra, Centre for Sustainable
Energy Studies, Surabaya, East Java, I ndonesia
Author lD: 55551550300
Other name formats:
Documents by author
f@:L_D
Subject area:
-l-t"*:lD
'Grslt"illEx{[y:i;'
13
Document and
citation trends:
?,,
!:
f
5
€
2
SGetcitation alerts
13
Documents
*
all
Add to ORCID @
19
co-authors
v
t+ documenk
Author history
)
list
Sort
Set document
ale*
on:
Date (newest)
Set document feed
Year
Authors
lnvestigation on biomass briquette from Cerbera manghas waste
View abstract
ay
p2 Request author detail corrections
Document title
as renewable energy
67
o
Cited by 34 documents
Add atl to
IlMd.
2ai)
View in search results format
Expo*
Total citations
ak
:I
Anatyre author output
Grylo Otlrf :-i{r-., AlL1{.:i!dD
source
twigs
Anggono, W., Suprianto, F.D.,
(-..), Evander,J., Kasrun,
Sutrisno, 2018
A.w.
Cited by
Source
and
0
Materials
0
ARPN Journal olr Engineering
Applied Sciences
Related documents
Biomass Briquette lnvestigation from Pterocarpus lndicus Leaves
as an Alternative Renewable
Energy
Waste Anggono, W., Sutrisno, Suprianto, F.D., 2017
Evander,J.
IOP Conference Series:
Science and Engineering
Open Access
View abstract
v
Related documents
Behaviour of biogas containing nitrogen on flammability limits and
laminar burning velocities
View abstract
v
v
v
2017 lnternational Journal of Renewable
Energy Research
Sutrisno, Anggono, W, Suprianto, F.D.,
Kasrun, A.W., Siahaan, l.H.
Related documents
Performance of gasoline/LPG Bl-fuel engine of manifold absolute
pressure sensor (MAPS) variations feedback
View abstract
W.
Related documents
The effects ofparticle size and pressureon the combustion
characteristics of cerbera manghasleaf briquettes
View abstract
Anggonq
Related documents
2017 ARPN Journal ofEngineering and
Applied Scieniis'
.,
Setiyo, M., Waluyo, 8., Anggonq W.,
Husni, M.
2016 ARPN Journal of Engineering and
Applied Sciences
i*.
Document title
Year Source
The influence of CO2in biogas flammability limit and laminar burning
velocity in spark ignited premix combustion at various pressures
v
View abstract
v
v
abstractv
v
v
2015 lnternational Journal of Applied
Suprianto, F.D., Anggono, W, Tanoto,
Engineering Research
M-S_C_
Anggono, W, Dwiputra Suprianto,
Wijaya, T.P., Tanoto, M.S.C.
2014 Advanced Materials Research
F.,
Anggono, W., Wardana, l-N.G-, Lawes,
M., Hughes, KJ.
2013 lnternational Journal of
Anggono, W., Wardana, 1., Lawes, M.,
(...), Wahyudi, S., Hamidi, N.
2013 Applied Mechanics and
v
Display:
v
20
Materials 1I
2013 Journal of Physics: Conference
15
Series
Related documents
Laminar burning characteristics of biogas-air mixtures in spark ignited
premix combustion
View absiract
Engineering and Technology
Related documents
Biogas laminar burning velocity and flammability characteristics in spark Anggono, W., Wardana, l.N.G., Lawes,
ignited premix combustion
M., (..), Hamidi, N., Hayakawa, A.
View abstract
Proaedings
Related documents
Laminar burning velocity and flammability characteristics of biogas in
spark ignited premix combustion at reduced pressure
View abstract
AIP ConGrence
Related documents
Etrect of inhibitors on biogas laminar burning velocity and flammability
limits in spark ignited premix combustion
View abstract
2076
Related documents
Behavior of flame propagation in biogas spark ignited premix
combustion with carbon dioxide inhibitor
View
Anggono, \v., Suprianto, F.D., Hartanto,
T.1., Purnomo, K., V/ijaya, T.P.
Related documents
Efect ofcarbon dioxide on flame characteristics in biogas external
premix combustion
Viewabstract
2016 AIP Conference Proceedings
M-, (.-.), Hamidi, N., Hayakawa, A-
'helated documents
The efect of nitrogen on biogas flame propagation characteristic in
premix combustion
View abstract
Anggono, W., Wardana, l.N.G., Lawes,
Cited by
Anggono, W., Wardana, LN.G., Lawes,
M., (..), Wahyudi, S., Hamidi, N.
2012 Journal ofApplied Sciences
Research
Related documents
v
results per page
^
Top
ofpage
The data displayed above is compiled exclusively from documents indexed in the Scopus database. To request corrections to any inaccuraci€s or
provide any further fedback, please use the Author Feedback Wizard .
About Scopus
Language
What is Scopus
Content coveraBe
E*-#l:t/ U#Za
iri4sjffirh+t
Scopus blog
tn+tufl|glw.+y
Scopus API
Pyccruri nsur
Customer Service
Help
Contact us
Privacl matters
}:I-ShVII:l{
Terms and
conditions Privary poliry
Copyright
O
2018 Elsevier B.V. All rights reserved. Scopus@ is a registered trademark of Elsevier
B.V.
GtRILXoroup'"
Cookies are set by this site. To decline them or learn more, visit our Cookies page.
|r.";;-
r
O
(J
z
v
',2
++i!
,.*j
G
.',cL
a.
|: ,<
]
r<
&
za.
o
tr
62
ZL
a
o
o
e
h
tr)
r\
8E
?t
E(!
o
t+J"
Eo
3oo €
o,
*l ,r :
Fl
ffi
or
l')
!E
d
gii$
ffi
ffi
r\
q
(}
(f,
t?
o
c).
o
r\
t\
l,.t
o
E
b\
q
o
6
a
o
$l
o
rI{
o
o
G
{u
5o
-8b
,E
(,)
#sg
$t
rO
E
\o
th
:l
3
o
H3
-o
o
1'
lt,
C
iiE
trn=
Pd
tr
(!_
(5
(,
(aA
o-
gE
o)
-
E'E
EI
Io
0)
o
os,
F.c
EE
o(l,
tso
c,
'tr
o
a
5E
!
U'
be
()cL
o
{uar,
o
srf
o
C!
Esi
-oo
I-d.
0
.E
.N
lEU,6
E.q
l)
E
6 g,i\
!= (, '-
an
(f,
,ctR
E
?x
E
E
{1,
E
L
f
()o
I"i-
'o
ilit:,
i;,
rlO
,-'
,,::
to
c'i
JO ==
EE,
l-J
vO
:f
c-,
o
()
odo
(I,!
LI
a
o
o
cn
o
E
o
a
C!
\o
(r,
\o
o
rO
o
\o
F
r\
N
@
o
a
N
I\
o
T'
(n
L
.9E
or
o
d.
l!c
r\
rO
fr:t
TE
'c
tf}rr
rF
ct
(t,
to
,o
tr
Eo
c
-Y
c
(!
fsl
au
E
o
F
?
EA
E
J
i;
tr
=
-,
o
6
of
.EE
-e
(U'=3,
4v
=E
q,
IL
F
,:,
O
,.
=fr(7)
rtr)N
(t?:C!i
oo()
E(nroutECn
g(,i=(frcg) (E.8
$.E
(l)E,OTtrOE
cl(ura)(I,:t)(u
coc(uc{l.,
ooo()o)c)
:
b9
Eo
ooo
fr
,1..t,,
,i,li,
EE
@(E
+qt,
O
=
o
()^
()oc)
rE
:.1:rl 5
ti:
O
-,
!i:r:
r',1:.1
tt
ltl
O
=
o
e
$fr
t8
.sl.
-o
= 1,r,
a::.->
:F
U
s
E#p
C ^v)
o,
u)x.ydj
;(o
o
F
o
O
+
.!v
o.
]f
E
o-
(E
0,
i:
L
b
E
I,:
Z'EE
t(u
o
()
e
.L
b9
Eo-
c
g,
-9,
$.E
39
Eq,
6.Eo
Eg
6
O
(rt
ii''
:IG
b9
Eooo
P6
6
'Fi.y*
;i:.,' O
r:::.'
:1.
,:iirt
r\
r
r
o
(u
9{
P
EE
H
*E
.5
:I(sC)N(J
f,{
".,
fr€
frET
g'; E'
8AE
'.
t
rrl
r.*.,i
I
I
I
&
utr
TS
un$-
.\d
EE
sE3
()$
-E
d6*
TE
ffi
a
q
o
r".'
c",l
o
o
a
q
Q
(r)
r+
q
()
(:)
ct
q
o
tl
I
l:
r
&r
&i,J'
i
'i. \o
:i o
:\o
'r
i
Ll
1r
t
sr
lf}
€r
(f
$
ro
i5*eE
$g
o14
l*.
(f,
P
(\l
ct t)
-o(u
ts&,
$
o
r
ruqr0
Ei
\r
I,f)
\p
\0
olr
H
o
'tr,
Or
(n
$
(r)
o
3
o
o-
(n
(E (,lN
r\
EEH
g.
-)o
E'}
{tt
E
(J
{t7
@
'l-x
T
-
s>
.g
+$b
o
CL
F
o
o
T'
cg,
rs
\o
()
I
?
.g
OE
(r(u
g{l}
cl ()
bg
Eoo
(J:
cfr
g=
gE
"(f,g,
cEr
(q.E
o'u
oo
EO
o(}
d,=
c
o
()
o.
o
T
6
.(:(n
aIn
$.5
o:(,
co(l}{l)
q)
13
o
g,
4t
O
c)
o
a
J
3
o
o
lJ-
{l,(,
b9
ECL
o
o
IE ',EE
aEA
i
-5.PO .P €EE
tu
EEEE E rcS$
EEeE E HEgE
8E82
;
itlf)\Oi
fo";e
I
-
l.i
o
z
cz
:'
Jt-
d
q
Iho
zo
tr
?a
Zv
8E
t
d
63
,.
I
-
6 t-A
-
600
n 9€E
's!
*aa
E,E
.e
+
(,l
g
a-
o
?
L.
o
o
.=
c
o
E
o
EN
C
=
€
o
lrl
T'
g
c
z
o
o
TJ
't
F
o
-E
oo
te
tr
N
'=
.
=E
&E
e
se *i
.3
oo
E!
i >
O C
'- E
> o
lr
:" tB
FE
q,
6ci
>L
e:
u
e
c
E,
rt
ti
u
t
E9
SE .I={
o7. 5a
.
o
o
i.
o
e
t.:
o
o
*''
-s
te
tr
F
l
(E
o
fJ
I
:
E
vO!
6S, 488
G
:{
I:
'6
tI
'6
-L
I
G'
o
=o
o
o.
!6
.9.
d
p
!
€,
l-
o
o
.cn
o
(,
E
o
o
rF
L
tr
o
o
o.
o
N .;
c
=
o!
g
I
,c
6
:
5
D
2E
EE
bd=
oo*!
GOF'6
tn
E=o=
=E6:a
OdOo
..66
6
:2".i
E
;FPEE
6
I b-:
E
€
o
l,
Bsl
v6
=u
o
F
l
e
$
to
ao
o
o
o
fc
i,?
o
!g
E
E
u,
tE
>o
e
E
e€
E
ic
5
N-9
A
:g,E
F
.d
()o
oe
E8
EA
r4:
-li,
g
F
q-.
ct
!
6
&
g
0
E
r,;
to
d.g
o6
6+
E .r+
tlD
P
tFd
€g
5
F
E6
:!
9E
H5
s
F
o
I
-
6
c
;o
F: ::o B
c lE
EO
NE
g E .B E
SERif
E s fr?
ri
=
E.
FF
a*
d*
dddd
i':
]
€E
E
t:
:
Eo
eE
!
a
4
o
]
9E
bz
-g
3
6:,
.E
6
E
n-^t
o
,,'r:+ri
9P
96
!go
4?(,
!
E
::o
o
=
l,
i
FrF.r
I
k1
This site uses cookies. By continuing to use this site you agree to our use of cookies. To flnd out more, see our Privacy
and Cookies
policy.
A
Welcome to l0Pscience, the home of scientific content from IOP Publishing
and our partners.
Find out more about loPscience, IOP Publishing and l0Pcorporate.
Find content in these subject areas:
Condensed matter, soft matter and materials science
Atomic, molecular, optical and plaima physics
Nuclear and high energy particle physics
Medical physics, biolo$cal physics and biomedical engineering
Astrophyeics, cosmologl and gravitation
Mathematical, statistical a nd q uantum physics
Earth and environmental science
More subjects
Latest news and articles
Journal lmpact Factor growth for lOP Publishing journals
fl#ngplrEffi@
gy*n
ITEEE
fi
28 June 2O18
fffi,ffiffirr
l0P Publishing launches trio of interdisciplinary open access journals: JPhys Energy, JPhys Materials and
x
JPhys Photonics.
27 Feb2OLS
Congratulations to the 2017 Nobel Prizefor Physics laureates RainerWeiss, Barry C. Barish and Kip S.
Thorne.
Find out more about gfavitationa]waves in our new research collection.
3 0ctober2017
Featured jourrials
More than 7O science journals.
t
Latest books
Born-digital essential physics books.
Conference series
Specialist proceeding publications.
Customer services
Please e-mail us at custserv@iop.org with your questions, comments or suggestions.
Librarians
Visit librarians.iop.orgi, our dedicated home for librarians.
-
ir,
This site uses cookies. By continuing to use this site you agree to our use of cookies. To find out more, see our
Privacy and Cookies policy.
ar
Contact us
Whatwould you like to contact us about?
For sales enquiries
To receive information about products and subscriptions, or to arrange an on-site visit by our sales team, please
contact one of our regional representatives.
For access enquiries or to report a probtem wlth l0Pscience
Please contact our customer services team at custserv@iop.org or use the feedback form.
We are committed to the continual development of l0Pscience. Your feedback will help us to improve the
features and functionality within the service, so that it better matches your needs. Please e-mail us at
custserv@iop.org with any questions, comments or sugf,estions.
You can also contact us at the addresses below.
UK office
IOP Publishing Ltd.
Temple Circus
Temple Way
Bristol BS16HG
United Kingdom
T
el:
+
44 (0)117 929
7
Fax: +44 (0)117 929
481-
4318
E-mail: custserv@iop.org
Registered in England
Company number: OO4675L4
VAT registration number: GB
US
4616000 84
offlce
IOP Publishing, lnc.
190 North lndependence MallWest
Suite 6O1
Philadelphia, PA 19106
USA
Tel: +1(215) 627 0880
Fax +1 (2LS) 627 0879
E-mail: i nfo@ioppubusa.com
We also have offices in Beijing, Moscow, St Petersburg, Tokyo and WashinEiton DC.
h.:*
I
l.l
ABOUI IOP LII{KS
About loPscience
About IOP Publishing
IOP Publishing open access policy
How to access l0Pscience
Your q uestions answered
What our users say...
Support materials
lnstitutional Io$n
n""u.iioiritv
Linking information
.;
STACKS
Copyright, permissions & author rights
IOP Journal Archive
lOPscience
extr.
l0Pscience extra online banners
lournat recommenUation
lOPcorporate
irtoiirr"
2OL7 Journal lmpact Factors for IOP Publishing journals
roi Cuoriitrini
i"rri n"*rirn"i"; rv""tiri' ironti"ri in irnam"ntur rno lppri"a pttrcir"
Peer Review Week Survey: Competition Terms & Conditions
Peer Review Week2OLT
tutorials-french
2017 Nobel Prize Collection
Emer$ng Leaders Award
IOP Publishing Early Career Reviewers
E
k,
lr
:
h\
This site uses cookies. By continuing to use this site you agree to our use of cookies. To find out more, see our Privacy and Cookies
Publishing Support
IOP Publishing
0ol$
I services
Share this page
HEffiMHtr
l0P Conference Series publication procedure
Ovenlew of tlte publlcaUon
procedure
REL^rED rnFoRmrnoil
The following notes provide a summary of the IOP Conference Series publishing process.
conference.
to
contract. After any further discussions
1. Submit a quote request online, or contact us directly with details of the
2. The IOP Conference Series team will review the details of your conference and write
confirm if we can offer a proceedings publishing
we will send you a draft publishing agreement that will contain all the details and terms
of
Proceedingp peer review policy
Conference series: copyright and permissions
lop proceedingp Licence
Proceedings policy on lmpact Factors
publication.
3. The organizers must inrorm authors
Preparjng your proceedings paper
ofthe
IOP Proceedings
Licence.
conferences: Contact us
4. Authors submit their papers to the conference organizers who manage the peer review.
Once review of the papers is completed the conference organizers submit the
final
nGLATED
cotrrEilr
papers to IOP Conference Series in one batch. Papers submitted to us must be PDFs
and must be in their final form ready for publication (as we do not edit or
proofread
lnformation for conference orglanisers
papers after they are submitted to us). Please ensure that all changes have been
approved by authors prior to the PDFS being submitted to IOP Publishing
5. Papers should be submitted to us via FTP (ftp.iop.org) using the account details
recorded in the publishing agreement.
6. on submission of the manuscripts, organizers should alsc return a completed
questionnaire. The interactive questionnaire can be downloaded here.
7. Production and publication. We will process the PDFs into a format suitable for
publication and upload them to our prepublication servers. The communicating editor
will be sent a username and password to access that server to make a final check of the
proceedings before they go live. Please note the following important points:
o Once a paper has been published online, changes will only be permitted in cases of
serious scientific error. ln those cases, an erratum or corrigendum will be published
according to the practices of professional scientific publishing.
o Changes resulting from stylistic issues cannot be made to proceedings once they
are published, so it is important that authors and organizers ensure papers have
been adequately checked and proofed prior to submission.
8. Upon publication we will write to authors (who have supplied an e-mail address)
informingthem of publication and provide them with the URL of their paper.
9. Printed copies (if applicable) will be prepared and shipped shortly after the online
publication of the articles. The communicating editor will be supplied with PDF proofs of
the cover.
lOPSClgnCe
-Journals Books About loPscience Contact
Copyright 2017 IOP Publishihg Terms &
us
Developing countries
conditions Disclaimer
This sile uses cookies. By continuing to use this site you agree to our
6e
access loP Publishing open access information
Privacy & cookie policy
of cmkies.
F*.,
j
'-
Er
IOP Conference Series: Materials Science and Engineering
PAPER. OFEI* ACCHSS
Related content
5th Asia Conference on Mechanical and Materials
Engineering (ACMME 2017)
Etlsirieeiind
ar"!C
Mant,{factrlrinrt ilCi.4F. M
ru
- Ard jnilr.]1eil!}1a!
Co!}fs!ell.* orl^$&ad
Nate$ei fr sssarriLtcs$R
To cite this article:2A17
nP
:mji)
Conf. Ser.: Mater. Sci. Eng.241 A11A0'l
Nanol*(*!*olilf,v
View the a$igl$s$tngfor updates and enhancements.
This content was downloaded from lP address 203.78.117.172 an 1110912018 at 03:49
f,,,:*
i
-
h,
5th Asia Conference on Mechanical and Materials EngineTing (ACMME
l0l'Conf.
Series: Materials Science and Engineeri*g241(2017)
0lltl0l
2017) _
IOP Publishing
doi:10.108811757-899xl24lfl{t}llffJ1
PREFACE
It
is our great pleasure to introduce you the proceedings of 20L7 5th Asia Conference on
Mechanical and Materials Engineering (ACMME 2OL7) held in Tokyo, Japan from June 9-11,
20t7. ACMMEz}fi is dedicated to issues related to mechanic4l and materials engineering.
One of the objectives of the conference is to establish platforms for collaborative research
projects in this field, and to find potential opportunities for international cooperation.
The conference program included keynote, oral, and poster presentations from scholars
working in the areas of materials science and engineering. It covered recent trends and
progress made in the field of mechanical and materials engineering. Professors from USA,
Malaysia and Taiwan were invited to deliver keynote speeches regarding the latest
information in their respective areas of expertise.
These proceedings present a selection from papers submitted to the conference by
universities, research institutes, and industries. All the papers were subject to peer-review by
conference committee members and international reviewers. The papers were selected
based on their quality and their relevance to the conference. The volume presents recent
advances in the field of mechanical and materials engineering as well as various related areas/
including Materials Science, Biomaterials, Manufacturing Processes, and Mechanical
Engineering, among others.
We would like to express our gratitude to all the members of the conference committee. We
would also like to thankthe reviewers, who spared their valuable time, for their advice. It has
ceftainly helped improve the quality, accuracy, and relevance of each paper selected for the
conference program and for publication. We also wish to thank all the authors who have
contributed to this conference, as well as the organizing committee, reviewers, speakers,
chairpersons, sponsors, and all the conference pafticipants for their support for ACMME 2017.
Prof. Omar S. Es-Said, Loyola Marymount University, USA
September
5,20t7
ffiffiContentfromthisworkmaybeusedunderthetermsof theC*atireCoiuntxsAitribritit-ra-1.0 Iieencr:. Anyfurtherdistribution
Wofthisworkmustmaintainattributiontotheauthor(s)andthetitleofthework,journalcitationandDoI.
Published under licence by IOP Publishing
Ltd
1
F:'-
5th Asia Conference on Mechanical and Maierials Engineering (ACMME
2017)
IOP Publishing
lOPConf. Series: Materials Science and Engineering?,4l(2017) 011001 doi:10.108811757-899X|24UUALLUJ1
STATEMENT OF PEER REVIEW
All papers published in this volume of IOP Conference *ries: Materials Science aN
Ertgineering have beeri peer reviewed through processes administered by the proceedings
Editors. Reviews were conducted by e)eert referees to the professional and scientific
standards expected of a proceedings joumal published by lOP'Publishing.
hF-
l"
':
k,
IOP Publshing
5th Asialonference on Mechanical and tl{aierials Engineering (ACMME 2017)
IOPConf. Series: Materials Science and Engineeritg?Al (2017) 011002 doi:10,1088,11757-899x1241/l/t,1fiAz
CONFERENCE COMMITTEE CHAIRS
Prof. Omar S. Es-Said, Loyola Maryrnount University, USA
Prof. Dr. Mohd Hamdi Bin
AM Shukor, University of Malaya, Malaysia
Prof. C. A. Huang, Chang Gung University, Taiwan
PROGRAM COMMITTEE CHAIRS
Prof. Hsin-Chih Lin, NationalTaiwan University, Taiwan
Prof. Jiyoung Kim, The University of To-*- z/-
Pieview
I
Author details
i
About Scopus Author ldentifier
x
The Scopus Author ldentifier assigns a unique number to groups ofdocuments written by the same author via an
algorithm that matches authorship based on
a certain
criteria. lfa document cannot be confidently matched with an
author identifier, it is grouped separately" In this case, you may see more than one entry for the same author.
1$
Anggono, Willyanto
r
ri
rrir* [l
6-index: @
Followthis Author i
View fi-graph
,
5
View potential author matches
Universitas Kristen Petra, Centre for Sustainable
Energy Studies, Surabaya, East Java, I ndonesia
Author lD: 55551550300
Other name formats:
Documents by author
f@:L_D
Subject area:
-l-t"*:lD
'Grslt"illEx{[y:i;'
13
Document and
citation trends:
?,,
!:
f
5
€
2
SGetcitation alerts
13
Documents
*
all
Add to ORCID @
19
co-authors
v
t+ documenk
Author history
)
list
Sort
Set document
ale*
on:
Date (newest)
Set document feed
Year
Authors
lnvestigation on biomass briquette from Cerbera manghas waste
View abstract
ay
p2 Request author detail corrections
Document title
as renewable energy
67
o
Cited by 34 documents
Add atl to
IlMd.
2ai)
View in search results format
Expo*
Total citations
ak
:I
Anatyre author output
Grylo Otlrf :-i{r-., AlL1{.:i!dD
source
twigs
Anggono, W., Suprianto, F.D.,
(-..), Evander,J., Kasrun,
Sutrisno, 2018
A.w.
Cited by
Source
and
0
Materials
0
ARPN Journal olr Engineering
Applied Sciences
Related documents
Biomass Briquette lnvestigation from Pterocarpus lndicus Leaves
as an Alternative Renewable
Energy
Waste Anggono, W., Sutrisno, Suprianto, F.D., 2017
Evander,J.
IOP Conference Series:
Science and Engineering
Open Access
View abstract
v
Related documents
Behaviour of biogas containing nitrogen on flammability limits and
laminar burning velocities
View abstract
v
v
v
2017 lnternational Journal of Renewable
Energy Research
Sutrisno, Anggono, W, Suprianto, F.D.,
Kasrun, A.W., Siahaan, l.H.
Related documents
Performance of gasoline/LPG Bl-fuel engine of manifold absolute
pressure sensor (MAPS) variations feedback
View abstract
W.
Related documents
The effects ofparticle size and pressureon the combustion
characteristics of cerbera manghasleaf briquettes
View abstract
Anggonq
Related documents
2017 ARPN Journal ofEngineering and
Applied Scieniis'
.,
Setiyo, M., Waluyo, 8., Anggonq W.,
Husni, M.
2016 ARPN Journal of Engineering and
Applied Sciences
i*.
Document title
Year Source
The influence of CO2in biogas flammability limit and laminar burning
velocity in spark ignited premix combustion at various pressures
v
View abstract
v
v
abstractv
v
v
2015 lnternational Journal of Applied
Suprianto, F.D., Anggono, W, Tanoto,
Engineering Research
M-S_C_
Anggono, W, Dwiputra Suprianto,
Wijaya, T.P., Tanoto, M.S.C.
2014 Advanced Materials Research
F.,
Anggono, W., Wardana, l-N.G-, Lawes,
M., Hughes, KJ.
2013 lnternational Journal of
Anggono, W., Wardana, 1., Lawes, M.,
(...), Wahyudi, S., Hamidi, N.
2013 Applied Mechanics and
v
Display:
v
20
Materials 1I
2013 Journal of Physics: Conference
15
Series
Related documents
Laminar burning characteristics of biogas-air mixtures in spark ignited
premix combustion
View absiract
Engineering and Technology
Related documents
Biogas laminar burning velocity and flammability characteristics in spark Anggono, W., Wardana, l.N.G., Lawes,
ignited premix combustion
M., (..), Hamidi, N., Hayakawa, A.
View abstract
Proaedings
Related documents
Laminar burning velocity and flammability characteristics of biogas in
spark ignited premix combustion at reduced pressure
View abstract
AIP ConGrence
Related documents
Etrect of inhibitors on biogas laminar burning velocity and flammability
limits in spark ignited premix combustion
View abstract
2076
Related documents
Behavior of flame propagation in biogas spark ignited premix
combustion with carbon dioxide inhibitor
View
Anggono, \v., Suprianto, F.D., Hartanto,
T.1., Purnomo, K., V/ijaya, T.P.
Related documents
Efect ofcarbon dioxide on flame characteristics in biogas external
premix combustion
Viewabstract
2016 AIP Conference Proceedings
M-, (.-.), Hamidi, N., Hayakawa, A-
'helated documents
The efect of nitrogen on biogas flame propagation characteristic in
premix combustion
View abstract
Anggono, W., Wardana, l.N.G., Lawes,
Cited by
Anggono, W., Wardana, LN.G., Lawes,
M., (..), Wahyudi, S., Hamidi, N.
2012 Journal ofApplied Sciences
Research
Related documents
v
results per page
^
Top
ofpage
The data displayed above is compiled exclusively from documents indexed in the Scopus database. To request corrections to any inaccuraci€s or
provide any further fedback, please use the Author Feedback Wizard .
About Scopus
Language
What is Scopus
Content coveraBe
E*-#l:t/ U#Za
iri4sjffirh+t
Scopus blog
tn+tufl|glw.+y
Scopus API
Pyccruri nsur
Customer Service
Help
Contact us
Privacl matters
}:I-ShVII:l{
Terms and
conditions Privary poliry
Copyright
O
2018 Elsevier B.V. All rights reserved. Scopus@ is a registered trademark of Elsevier
B.V.
GtRILXoroup'"
Cookies are set by this site. To decline them or learn more, visit our Cookies page.
|r.";;-
r
O
(J
z
v
',2
++i!
,.*j
G
.',cL
a.
|: ,<
]
r<
&
za.
o
tr
62
ZL
a
o
o
e
h
tr)
r\
8E
?t
E(!
o
t+J"
Eo
3oo €
o,
*l ,r :
Fl
ffi
or
l')
!E
d
gii$
ffi
ffi
r\
q
(}
(f,
t?
o
c).
o
r\
t\
l,.t
o
E
b\
q
o
6
a
o
$l
o
rI{
o
o
G
{u
5o
-8b
,E
(,)
#sg
$t
rO
E
\o
th
:l
3
o
H3
-o
o
1'
lt,
C
iiE
trn=
Pd
tr
(!_
(5
(,
(aA
o-
gE
o)
-
E'E
EI
Io
0)
o
os,
F.c
EE
o(l,
tso
c,
'tr
o
a
5E
!
U'
be
()cL
o
{uar,
o
srf
o
C!
Esi
-oo
I-d.
0
.E
.N
lEU,6
E.q
l)
E
6 g,i\
!= (, '-
an
(f,
,ctR
E
?x
E
E
{1,
E
L
f
()o
I"i-
'o
ilit:,
i;,
rlO
,-'
,,::
to
c'i
JO ==
EE,
l-J
vO
:f
c-,
o
()
odo
(I,!
LI
a
o
o
cn
o
E
o
a
C!
\o
(r,
\o
o
rO
o
\o
F
r\
N
@
o
a
N
I\
o
T'
(n
L
.9E
or
o
d.
l!c
r\
rO
fr:t
TE
'c
tf}rr
rF
ct
(t,
to
,o
tr
Eo
c
-Y
c
(!
fsl
au
E
o
F
?
EA
E
J
i;
tr
=
-,
o
6
of
.EE
-e
(U'=3,
4v
=E
q,
IL
F
,:,
O
,.
=fr(7)
rtr)N
(t?:C!i
oo()
E(nroutECn
g(,i=(frcg) (E.8
$.E
(l)E,OTtrOE
cl(ura)(I,:t)(u
coc(uc{l.,
ooo()o)c)
:
b9
Eo
ooo
fr
,1..t,,
,i,li,
EE
@(E
+qt,
O
=
o
()^
()oc)
rE
:.1:rl 5
ti:
O
-,
!i:r:
r',1:.1
tt
ltl
O
=
o
e
$fr
t8
.sl.
-o
= 1,r,
a::.->
:F
U
s
E#p
C ^v)
o,
u)x.ydj
;(o
o
F
o
O
+
.!v
o.
]f
E
o-
(E
0,
i:
L
b
E
I,:
Z'EE
t(u
o
()
e
.L
b9
Eo-
c
g,
-9,
$.E
39
Eq,
6.Eo
Eg
6
O
(rt
ii''
:IG
b9
Eooo
P6
6
'Fi.y*
;i:.,' O
r:::.'
:1.
,:iirt
r\
r
r
o
(u
9{
P
EE
H
*E
.5
:I(sC)N(J
f,{
".,
fr€
frET
g'; E'
8AE
'.
t
rrl
r.*.,i
I
I
I
&
utr
TS
un$-
.\d
EE
sE3
()$
-E
d6*
TE
ffi
a
q
o
r".'
c",l
o
o
a
q
Q
(r)
r+
q
()
(:)
ct
q
o
tl
I
l:
r
&r
&i,J'
i
'i. \o
:i o
:\o
'r
i
Ll
1r
t
sr
lf}
€r
(f
$
ro
i5*eE
$g
o14
l*.
(f,
P
(\l
ct t)
-o(u
ts&,
$
o
r
ruqr0
Ei
\r
I,f)
\p
\0
olr
H
o
'tr,
Or
(n
$
(r)
o
3
o
o-
(n
(E (,lN
r\
EEH
g.
-)o
E'}
{tt
E
(J
{t7
@
'l-x
T
-
s>
.g
+$b
o
CL
F
o
o
T'
cg,
rs
\o
()
I
?
.g
OE
(r(u
g{l}
cl ()
bg
Eoo
(J:
cfr
g=
gE
"(f,g,
cEr
(q.E
o'u
oo
EO
o(}
d,=
c
o
()
o.
o
T
6
.(:(n
aIn
$.5
o:(,
co(l}{l)
q)
13
o
g,
4t
O
c)
o
a
J
3
o
o
lJ-
{l,(,
b9
ECL
o
o
IE ',EE
aEA
i
-5.PO .P €EE
tu
EEEE E rcS$
EEeE E HEgE
8E82
;
itlf)\Oi
fo";e
I
-
l.i
o
z
cz
:'
Jt-
d
q
Iho
zo
tr
?a
Zv
8E
t
d
63
,.
I
-
6 t-A
-
600
n 9€E
's!
*aa
E,E
.e
+
(,l
g
a-
o
?
L.
o
o
.=
c
o
E
o
EN
C
=
€
o
lrl
T'
g
c
z
o
o
TJ
't
F
o
-E
oo
te
tr
N
'=
.
=E
&E
e
se *i
.3
oo
E!
i >
O C
'- E
> o
lr
:" tB
FE
q,
6ci
>L
e:
u
e
c
E,
rt
ti
u
t
E9
SE .I={
o7. 5a
.
o
o
i.
o
e
t.:
o
o
*''
-s
te
tr
F
l
(E
o
fJ
I
:
E
vO!
6S, 488
G
:{
I:
'6
tI
'6
-L
I
G'
o
=o
o
o.
!6
.9.
d
p
!
€,
l-
o
o
.cn
o
(,
E
o
o
rF
L
tr
o
o
o.
o
N .;
c
=
o!
g
I
,c
6
:
5
D
2E
EE
bd=
oo*!
GOF'6
tn
E=o=
=E6:a
OdOo
..66
6
:2".i
E
;FPEE
6
I b-:
E
€
o
l,
Bsl
v6
=u
o
F
l
e
$
to
ao
o
o
o
fc
i,?
o
!g
E
E
u,
tE
>o
e
E
e€
E
ic
5
N-9
A
:g,E
F
.d
()o
oe
E8
EA
r4:
-li,
g
F
q-.
ct
!
6
&
g
0
E
r,;
to
d.g
o6
6+
E .r+
tlD
P
tFd
€g
5
F
E6
:!
9E
H5
s
F
o
I
-
6
c
;o
F: ::o B
c lE
EO
NE
g E .B E
SERif
E s fr?
ri
=
E.
FF
a*
d*
dddd
i':
]
€E
E
t:
:
Eo
eE
!
a
4
o
]
9E
bz
-g
3
6:,
.E
6
E
n-^t
o
,,'r:+ri
9P
96
!go
4?(,
!
E
::o
o
=
l,
i
FrF.r
I
k1
This site uses cookies. By continuing to use this site you agree to our use of cookies. To flnd out more, see our Privacy
and Cookies
policy.
A
Welcome to l0Pscience, the home of scientific content from IOP Publishing
and our partners.
Find out more about loPscience, IOP Publishing and l0Pcorporate.
Find content in these subject areas:
Condensed matter, soft matter and materials science
Atomic, molecular, optical and plaima physics
Nuclear and high energy particle physics
Medical physics, biolo$cal physics and biomedical engineering
Astrophyeics, cosmologl and gravitation
Mathematical, statistical a nd q uantum physics
Earth and environmental science
More subjects
Latest news and articles
Journal lmpact Factor growth for lOP Publishing journals
fl#ngplrEffi@
gy*n
ITEEE
fi
28 June 2O18
fffi,ffiffirr
l0P Publishing launches trio of interdisciplinary open access journals: JPhys Energy, JPhys Materials and
x
JPhys Photonics.
27 Feb2OLS
Congratulations to the 2017 Nobel Prizefor Physics laureates RainerWeiss, Barry C. Barish and Kip S.
Thorne.
Find out more about gfavitationa]waves in our new research collection.
3 0ctober2017
Featured jourrials
More than 7O science journals.
t
Latest books
Born-digital essential physics books.
Conference series
Specialist proceeding publications.
Customer services
Please e-mail us at custserv@iop.org with your questions, comments or suggestions.
Librarians
Visit librarians.iop.orgi, our dedicated home for librarians.
-
ir,
This site uses cookies. By continuing to use this site you agree to our use of cookies. To find out more, see our
Privacy and Cookies policy.
ar
Contact us
Whatwould you like to contact us about?
For sales enquiries
To receive information about products and subscriptions, or to arrange an on-site visit by our sales team, please
contact one of our regional representatives.
For access enquiries or to report a probtem wlth l0Pscience
Please contact our customer services team at custserv@iop.org or use the feedback form.
We are committed to the continual development of l0Pscience. Your feedback will help us to improve the
features and functionality within the service, so that it better matches your needs. Please e-mail us at
custserv@iop.org with any questions, comments or sugf,estions.
You can also contact us at the addresses below.
UK office
IOP Publishing Ltd.
Temple Circus
Temple Way
Bristol BS16HG
United Kingdom
T
el:
+
44 (0)117 929
7
Fax: +44 (0)117 929
481-
4318
E-mail: custserv@iop.org
Registered in England
Company number: OO4675L4
VAT registration number: GB
US
4616000 84
offlce
IOP Publishing, lnc.
190 North lndependence MallWest
Suite 6O1
Philadelphia, PA 19106
USA
Tel: +1(215) 627 0880
Fax +1 (2LS) 627 0879
E-mail: i nfo@ioppubusa.com
We also have offices in Beijing, Moscow, St Petersburg, Tokyo and WashinEiton DC.
h.:*
I
l.l
ABOUI IOP LII{KS
About loPscience
About IOP Publishing
IOP Publishing open access policy
How to access l0Pscience
Your q uestions answered
What our users say...
Support materials
lnstitutional Io$n
n""u.iioiritv
Linking information
.;
STACKS
Copyright, permissions & author rights
IOP Journal Archive
lOPscience
extr.
l0Pscience extra online banners
lournat recommenUation
lOPcorporate
irtoiirr"
2OL7 Journal lmpact Factors for IOP Publishing journals
roi Cuoriitrini
i"rri n"*rirn"i"; rv""tiri' ironti"ri in irnam"ntur rno lppri"a pttrcir"
Peer Review Week Survey: Competition Terms & Conditions
Peer Review Week2OLT
tutorials-french
2017 Nobel Prize Collection
Emer$ng Leaders Award
IOP Publishing Early Career Reviewers
E
k,
lr
:
h\
This site uses cookies. By continuing to use this site you agree to our use of cookies. To find out more, see our Privacy and Cookies
Publishing Support
IOP Publishing
0ol$
I services
Share this page
HEffiMHtr
l0P Conference Series publication procedure
Ovenlew of tlte publlcaUon
procedure
REL^rED rnFoRmrnoil
The following notes provide a summary of the IOP Conference Series publishing process.
conference.
to
contract. After any further discussions
1. Submit a quote request online, or contact us directly with details of the
2. The IOP Conference Series team will review the details of your conference and write
confirm if we can offer a proceedings publishing
we will send you a draft publishing agreement that will contain all the details and terms
of
Proceedingp peer review policy
Conference series: copyright and permissions
lop proceedingp Licence
Proceedings policy on lmpact Factors
publication.
3. The organizers must inrorm authors
Preparjng your proceedings paper
ofthe
IOP Proceedings
Licence.
conferences: Contact us
4. Authors submit their papers to the conference organizers who manage the peer review.
Once review of the papers is completed the conference organizers submit the
final
nGLATED
cotrrEilr
papers to IOP Conference Series in one batch. Papers submitted to us must be PDFs
and must be in their final form ready for publication (as we do not edit or
proofread
lnformation for conference orglanisers
papers after they are submitted to us). Please ensure that all changes have been
approved by authors prior to the PDFS being submitted to IOP Publishing
5. Papers should be submitted to us via FTP (ftp.iop.org) using the account details
recorded in the publishing agreement.
6. on submission of the manuscripts, organizers should alsc return a completed
questionnaire. The interactive questionnaire can be downloaded here.
7. Production and publication. We will process the PDFs into a format suitable for
publication and upload them to our prepublication servers. The communicating editor
will be sent a username and password to access that server to make a final check of the
proceedings before they go live. Please note the following important points:
o Once a paper has been published online, changes will only be permitted in cases of
serious scientific error. ln those cases, an erratum or corrigendum will be published
according to the practices of professional scientific publishing.
o Changes resulting from stylistic issues cannot be made to proceedings once they
are published, so it is important that authors and organizers ensure papers have
been adequately checked and proofed prior to submission.
8. Upon publication we will write to authors (who have supplied an e-mail address)
informingthem of publication and provide them with the URL of their paper.
9. Printed copies (if applicable) will be prepared and shipped shortly after the online
publication of the articles. The communicating editor will be supplied with PDF proofs of
the cover.
lOPSClgnCe
-Journals Books About loPscience Contact
Copyright 2017 IOP Publishihg Terms &
us
Developing countries
conditions Disclaimer
This sile uses cookies. By continuing to use this site you agree to our
6e
access loP Publishing open access information
Privacy & cookie policy
of cmkies.
F*.,
j
'-
Er
IOP Conference Series: Materials Science and Engineering
PAPER. OFEI* ACCHSS
Related content
5th Asia Conference on Mechanical and Materials
Engineering (ACMME 2017)
Etlsirieeiind
ar"!C
Mant,{factrlrinrt ilCi.4F. M
ru
- Ard jnilr.]1eil!}1a!
Co!}fs!ell.* orl^$&ad
Nate$ei fr sssarriLtcs$R
To cite this article:2A17
nP
:mji)
Conf. Ser.: Mater. Sci. Eng.241 A11A0'l
Nanol*(*!*olilf,v
View the a$igl$s$tngfor updates and enhancements.
This content was downloaded from lP address 203.78.117.172 an 1110912018 at 03:49
f,,,:*
i
-
h,
5th Asia Conference on Mechanical and Materials EngineTing (ACMME
l0l'Conf.
Series: Materials Science and Engineeri*g241(2017)
0lltl0l
2017) _
IOP Publishing
doi:10.108811757-899xl24lfl{t}llffJ1
PREFACE
It
is our great pleasure to introduce you the proceedings of 20L7 5th Asia Conference on
Mechanical and Materials Engineering (ACMME 2OL7) held in Tokyo, Japan from June 9-11,
20t7. ACMMEz}fi is dedicated to issues related to mechanic4l and materials engineering.
One of the objectives of the conference is to establish platforms for collaborative research
projects in this field, and to find potential opportunities for international cooperation.
The conference program included keynote, oral, and poster presentations from scholars
working in the areas of materials science and engineering. It covered recent trends and
progress made in the field of mechanical and materials engineering. Professors from USA,
Malaysia and Taiwan were invited to deliver keynote speeches regarding the latest
information in their respective areas of expertise.
These proceedings present a selection from papers submitted to the conference by
universities, research institutes, and industries. All the papers were subject to peer-review by
conference committee members and international reviewers. The papers were selected
based on their quality and their relevance to the conference. The volume presents recent
advances in the field of mechanical and materials engineering as well as various related areas/
including Materials Science, Biomaterials, Manufacturing Processes, and Mechanical
Engineering, among others.
We would like to express our gratitude to all the members of the conference committee. We
would also like to thankthe reviewers, who spared their valuable time, for their advice. It has
ceftainly helped improve the quality, accuracy, and relevance of each paper selected for the
conference program and for publication. We also wish to thank all the authors who have
contributed to this conference, as well as the organizing committee, reviewers, speakers,
chairpersons, sponsors, and all the conference pafticipants for their support for ACMME 2017.
Prof. Omar S. Es-Said, Loyola Marymount University, USA
September
5,20t7
ffiffiContentfromthisworkmaybeusedunderthetermsof theC*atireCoiuntxsAitribritit-ra-1.0 Iieencr:. Anyfurtherdistribution
Wofthisworkmustmaintainattributiontotheauthor(s)andthetitleofthework,journalcitationandDoI.
Published under licence by IOP Publishing
Ltd
1
F:'-
5th Asia Conference on Mechanical and Maierials Engineering (ACMME
2017)
IOP Publishing
lOPConf. Series: Materials Science and Engineering?,4l(2017) 011001 doi:10.108811757-899X|24UUALLUJ1
STATEMENT OF PEER REVIEW
All papers published in this volume of IOP Conference *ries: Materials Science aN
Ertgineering have beeri peer reviewed through processes administered by the proceedings
Editors. Reviews were conducted by e)eert referees to the professional and scientific
standards expected of a proceedings joumal published by lOP'Publishing.
hF-
l"
':
k,
IOP Publshing
5th Asialonference on Mechanical and tl{aierials Engineering (ACMME 2017)
IOPConf. Series: Materials Science and Engineeritg?Al (2017) 011002 doi:10,1088,11757-899x1241/l/t,1fiAz
CONFERENCE COMMITTEE CHAIRS
Prof. Omar S. Es-Said, Loyola Maryrnount University, USA
Prof. Dr. Mohd Hamdi Bin
AM Shukor, University of Malaya, Malaysia
Prof. C. A. Huang, Chang Gung University, Taiwan
PROGRAM COMMITTEE CHAIRS
Prof. Hsin-Chih Lin, NationalTaiwan University, Taiwan
Prof. Jiyoung Kim, The University of To-*- z/-