PROSES PERMESINAN DRILLING PADA KACA - Diponegoro University | Institutional Repository (UNDIP-IR)
DAFTAR PUSTAKA
ASM Handbook, (1995), Volume 16 of the 9th Edition Metals Handbook.
Behera, K.B., (1990), Parametric Optimization of Microdrilling in Aerospace Material,
Department of Mechanical Engineering, National Institute of Technology,
Rourkel.
Bulletin No. 1951-2008, (2008), Compact Roundness Measurement ROUNDTEST RA10, Mitutoyo America Corporation, U S A
Daryus, A., (1999), Proses Produksi II, Universitas Darma Persada, Jakarta.
Fang.F.Z., Zhang, G.X., (2003), An experimental study of edge radius effect on cutting
single crystal silicon, International Journal of Advanced Manufacturing
Technology 22, 703-707
Fang, F.Z., Zhang, G.X., (2004), An experimental study of optical glass machining,
International Journal of Advanced Manufacturing Technology 23, 155-160.
Kalpakjian, Serope.,(1992), Manufacturing Engineering and Technology 2nd Edition,
Addison Publishing Company Inc, California.
Nakatsuji, T., Kodera, S., Hara, S., Matsunaga, H., Ikawa, N., Shimada, S., (1990),
Diamond Turning of Brittle Materials for Optical Components, Annals of
CIRP,Vol. 39, pp. 89-92
Nielsen, J.H., (2009), Tempered Glass-Bolted Connections and Related Problems,
Department of Civil Engineering, Technical University of Denmark
Rusnaldy, (2007), Machinability of single crystal silicon wafer in micro-end-milling
operation, PhD Dissertation, Yeungnam University.
Rochim, T., (1993), Teori dan Teknologi Proses Permesinan, Laboratorium Teknik
Prosduksi dan Metrologi Industri, Jurusan Teknik Mesin, ITB, Bandung.
www.bosch.com/product/drillbit/MG4324 (diakses 2 Agustus 2012)
www.amicodrillbit.com/catalouge/3 (diakses 14 Juli 2012)
www.scribd.com/doc/81704873/proses permesinan# (diakses tanggal 8 Juli 2012)
www.trapani.com/IM 115 (diakses 17 Juli 2012)
Yamane, M., Asahara, Y., (2002), Glasses for Photonics, Cambridge University Press
67
68
Yan, J., Syoji, K., Kuriyagawa, T., Suzuki, H., (2002), Ductile regime turning at large
tool feed, Journal of Materials Processing Technology 121, 363-372.
ASM Handbook, (1995), Volume 16 of the 9th Edition Metals Handbook.
Behera, K.B., (1990), Parametric Optimization of Microdrilling in Aerospace Material,
Department of Mechanical Engineering, National Institute of Technology,
Rourkel.
Bulletin No. 1951-2008, (2008), Compact Roundness Measurement ROUNDTEST RA10, Mitutoyo America Corporation, U S A
Daryus, A., (1999), Proses Produksi II, Universitas Darma Persada, Jakarta.
Fang.F.Z., Zhang, G.X., (2003), An experimental study of edge radius effect on cutting
single crystal silicon, International Journal of Advanced Manufacturing
Technology 22, 703-707
Fang, F.Z., Zhang, G.X., (2004), An experimental study of optical glass machining,
International Journal of Advanced Manufacturing Technology 23, 155-160.
Kalpakjian, Serope.,(1992), Manufacturing Engineering and Technology 2nd Edition,
Addison Publishing Company Inc, California.
Nakatsuji, T., Kodera, S., Hara, S., Matsunaga, H., Ikawa, N., Shimada, S., (1990),
Diamond Turning of Brittle Materials for Optical Components, Annals of
CIRP,Vol. 39, pp. 89-92
Nielsen, J.H., (2009), Tempered Glass-Bolted Connections and Related Problems,
Department of Civil Engineering, Technical University of Denmark
Rusnaldy, (2007), Machinability of single crystal silicon wafer in micro-end-milling
operation, PhD Dissertation, Yeungnam University.
Rochim, T., (1993), Teori dan Teknologi Proses Permesinan, Laboratorium Teknik
Prosduksi dan Metrologi Industri, Jurusan Teknik Mesin, ITB, Bandung.
www.bosch.com/product/drillbit/MG4324 (diakses 2 Agustus 2012)
www.amicodrillbit.com/catalouge/3 (diakses 14 Juli 2012)
www.scribd.com/doc/81704873/proses permesinan# (diakses tanggal 8 Juli 2012)
www.trapani.com/IM 115 (diakses 17 Juli 2012)
Yamane, M., Asahara, Y., (2002), Glasses for Photonics, Cambridge University Press
67
68
Yan, J., Syoji, K., Kuriyagawa, T., Suzuki, H., (2002), Ductile regime turning at large
tool feed, Journal of Materials Processing Technology 121, 363-372.