Evaluasi Perencanaan Tebal Perkerasan Lentur Metode Bina Marga Pt T-01-2002-B Dengan Menggunakan Program Kenpave

DAFTAR PUSTAKA

1. Angela L.Priest, David H.Timm, 2006. Methodology and Calibration Of
Fatique Transfer Function For Mechanistic – Empirical Flexible
Pavement Design, National Center for Asphalt Technology, Alabama

2. Djunaedi Kosasih,Gregorius Sanjaya, 2001. Modulus Resilent Tanah
Dasar Dalam Desain Struktur Perkerasan Lentur Secara Analitis ,

Simposium ke-4 FSTPT Universitas Udayana . Bali
3. Departemen Pemukiman dan Prasarana Wilayah, 2002, Pedoman
Perencanaan Tebal Perkerasan Lentur, No. Pt T-01-2002-B, Jakarta.

4. Ekwulo, E.O & Eme, D. B.(2009). Fatigue and Rutting Strain Analysis of
Flexible Pavements Designed Using CBR Methods. African Journal of
Environmental Science and Technology, Vol. 3 (12), pp. 412-421

5. Hendarsin, Shirley (2000), Petunjuk Praktis Perencanaan Teknik Jalan
Raya , Politeknik Negri Bandung – Jurusan Teknik Sipil.

6. Hadihardaja, Joetata (1997), Rekayasa Jalan Raya , Penerbit Gunadarma,

Jakarta
7. Huang, Yang H. (2004). Pavement Analysis And Design. Pearson
Education, Upper Saddle River, New Jersey
8. Kementerian Pekerjaan Umum Direktorat Jenderal Bina Marga, 2012,
Manual Desain Perkerasan Jalan, No. 22.2 / KPTS/Db/2012.

9. Muis, Zulkarnain A. (1993).Perencanaan Tebal Perkerasan Lanjutan
bahagian I. Diktat Kuliah Jurusan Teknik Sipil USU.Medan.

Universitas Sumatera Utara

10. Yoder E.J & M.W Witczak. (1975). Principles Of Pavement Design.
Wiley, New York
11. Sukirman, Silvia (1999), Perkerasan Lentur Jalan Raya , Penerbit Nova,
Bandung
12. Kosasih, Djunaedi.(2005).Rekayasa Struktur dan Bahan Perkerasan,
Modul

II.Diktat

Kuliah

Jurusan

Teknik

Sipil

dan

Lingkungan

ITB.Bandung.
13. Croney, D, 1977. The Design and Performance of Road Pavements.
Transport and Road Research Laboratory, London
14. Sulaksono, S.W, 2000. Rekayasa Jalan. ITB. Bandung
15. Gedafa, Daba S. (2006). Comparison of flexible pavement performance
using

kenlayer

and

hdm-4.

Fall

Student

Conference

Midwest

Transportation Consortium Kansas State University. Manhattan
16. Schwartz , Charles W. & Carvalho Regis L. (2007). Evaluation of
Mechanistic-Empirical Design Procedur. Department of Civil and

Environmental Engineering The University of Maryland. College Park.

Universitas Sumatera Utara