Perbedaan Struktur Mikroskopis, Kekuatan Kompresi dan Perubahan Dimensi Gipsum Tipe III Komersial dengan Gipsum Tipe III Daur Ulang Untuk Model Kerja Gigi Tiruan

DAFTAR PUSTAKA
Anusavice KJ, 2013. Philips buku ajar ilmu bahan kedokteran gigi. Ed 11. Alih
Bahasa; Johan Arif Budiman, Susi Purwoko. Jakarta: EGC: 155-172.
Anusavice KJ, 2003. Phillips’ science of dental materials. 11th ed. Missouri: Elsevier
Saunders: 257-77.
Abidoye LK, Bello RA, 2010. Restoration of compressive strength of recycled
gipsum board. The Pasific of Science and Technology; 11(2): 42-9.
Alberto N, Carvalho L, Lima H, Antunes P, Nogueira R, Pinto JL, 2011
Characterization of different water/powder ratios of dental gipsum using fiber bragg
grating sensors. Dental Materials Journal; 30(5): 700–6.
American National Standards Institute. Revised american dental association
specification No. 19 for non-aqueous, elastomeric dental impression materials

(15
Januari 2013).
American National Standards Institute. Revised american national standards/
american dental association specification no. 25 for dental gypsum products.
(15 Januari
2013).
Abdullah MA, 2006. Surface detail, compressive strength, and dimensional accuracy
of gypsum casts after repeated immersion in hypochlorite solution. J Prosthet Dent;

95:462-8.
Anderson PC, Pendleton AE, 2001. The dental assistant. 7th ed. USA: Delmar Inc,
393-4.
Budiharto, 2008. Metodologi penelitian kesehatan. Jakarta: EGC: 46.
Bardella PS, Camarini G, 2006. Hidration crystals by scanning electron microscopy
(SEM) in recycled plaster. LNLS Activity Report.
Craig RG, Powers JM, Wataha JC, 2000. Dental materials properties and
manipulation. 7th ed. Missouri: Mosby Elsevier: 193-7.
Combe EC, 1986. Notes on dental materials. 5th ed. New York: Longman Group
Limited: 299-308.
Chandra S, Chandra S, Chandra R, 2000. A textbook of dental materials with
multiple choice questions. New Delhi: Jaypee Brothers Medical Publishers (P) Ltd,:
36-47.

92

Hatrick CD, Eakle WS, Bird WF, 2011. Dental materials clinical applications for
dental assistants and dental hygienists. 2nd ed. Missouri: Saunders Elsevier: 203.
Heshmati R, Nagy WW, Wirth CG, Dhuru VB, 2002. Delayed linear expansion of
improved dental stone. J Prosthet Dent; 88: 26-31.

Hasan RH, Mohammad KA, 2005. The effect of drying techniques on the
compressive strength of gypsum products. Al- Rafidain Dent J; 5 (1): 63-8.
Hatim NA, Al-khayat KL, 2009. Modification of gypsum products: the effect of
drying methods on the compressive strength and surface hardness of modified
gypsum product. Al- Rafidain Dent J; 9 (2): 162-67.
Hani FO, Thakib A, Ziad S, Simone G, 2008. Quantitative and qualitative elemental
analysis of different nickel-titanium rotary instruments by using scanning electron
microscopy and energy dispersive spectroscopy ; 34(1):53-5.
Ibrahim RM, Seniour SH, Sheehab GI, 1995. Recycling of calcium sulphate
dihydrate. Abstrak. Egypt Dent J; 41(3): 1253-6.
Manappallil JJ, 1998. Basic dental materials. India: Jaypee Brothers Medical
Publishers (P) Ltd: 30-2, 42-4.
McCabe JF; Walls AWG, 2008. Applied dental materials. 9th ed. Oxford: Blackwell
Publishing Ltd: 32.
Michalakis KX et al, 2012. Delayed linear dimensional changes of five high
strength gipsum products used for the fabrication of definitive casts. J Prosthet Dent ;
108: 189-195.
Michalakis KX et al, 2009. Delayed setting and hygroscopic linear expansion of
three gipsum products used for cast articulation. J Prosthet Dent 2009;102:313-8.
Noort RV, 2007. Introduction to dental materials. 3rd ed. Toronto: Mosby Elsevier:

211-4.
Powers JM, Sakaguchi RL, 2006. Craig’s restorative dental materials. 12th ed. St.
Louis: Elsevier Inc: 314-5.
Powers JM, Wataha JC, 2008. Dental materials properties and manipulation. 9th ed.
St. Louis: Elsevier Inc: 19-26.
Scheller C, Sheridan, 2010. Basic guide to dental materials. Oxford: WileyBlackwell: 232.
Sumansutra. Bahaya air alkali. (26
oktober 2014).

93

Soratur SH, 2002. Essentials of dental materials. New Delhi: Jaypee Brothers
Medical Publishers (P) Ltd,: 133-41.
Selby A, 1979. The relationship between the viscosity of the mix and the tensile
strength of cast gypsum. Thesis. Sydney: University of Sydney: 11-3, 50.
Yosi KE dkk, 1998. Evaluation of w/p ratio, setting time and compressive strength of
dental stone type III and IV marketed in Jakarta. Abstrak. Jurnal Kedokteran Gigi
Universitas Indonesia.
Zeki A, Aljubouri AM, 2009. Physical properties and compressive strength of
technical plaster and local juss. Iraqi J Earth Science; 9(2):49-8.


94

Dokumen yang terkait

Perbedaan Kekuatan Kompresi Gipsum Tipe III Pabrikan dan Daur Ulang serta Gipsum Tipe III Daur Ulang dengan Penambahan Larutan Zink Sulfat 4% sebagai Bahan Model Kerja Gigitiruan

12 77 77

Perbedaan Kekuatan Kompresi Gipsum Tipe III Pabrikan, Gipsum Tipe III Daur Ulang Dengan dan Tanpa Penambahan Larutan Garam Dapur 1,5% Sebagai Bahan Model Kerja Gigitiruan

4 50 70

Perbedaan Perubahan Dimensi pada Gipsum Tipe III Komersial Dengan Gipsum Tipe III Daur Ulang Sebagai Bahan Model Kerja Gigitiruan

6 109 66

Perbedaan Struktur Mikroskopis, Kekuatan Kompresi dan Perubahan Dimensi Gipsum Tipe III Komersial dengan Gipsum Tipe III Daur Ulang Untuk Model Kerja Gigi Tiruan

0 1 18

Perbedaan Struktur Mikroskopis, Kekuatan Kompresi dan Perubahan Dimensi Gipsum Tipe III Komersial dengan Gipsum Tipe III Daur Ulang Untuk Model Kerja Gigi Tiruan

0 0 2

Perbedaan Struktur Mikroskopis, Kekuatan Kompresi dan Perubahan Dimensi Gipsum Tipe III Komersial dengan Gipsum Tipe III Daur Ulang Untuk Model Kerja Gigi Tiruan

0 0 8

Perbedaan Struktur Mikroskopis, Kekuatan Kompresi dan Perubahan Dimensi Gipsum Tipe III Komersial dengan Gipsum Tipe III Daur Ulang Untuk Model Kerja Gigi Tiruan

0 0 28

BAB 2 TINJAUAN PUSTAKA 2.1 Gipsum - Perbedaan Perubahan Dimensi pada Gipsum Tipe III Komersial Dengan Gipsum Tipe III Daur Ulang Sebagai Bahan Model Kerja Gigitiruan

0 0 14

BAB 1 PENDAHULUAN 1.1 Latar Belakang - Perbedaan Perubahan Dimensi pada Gipsum Tipe III Komersial Dengan Gipsum Tipe III Daur Ulang Sebagai Bahan Model Kerja Gigitiruan

0 0 5

PERBEDAAN PERUBAHAN DIMENSI PADA GIPSUM TIPE III KOMERSIAL DENGAN GIPSUM TIPE III DAUR ULANG SEBAGAI BAHAN MODEL KERJA GIGITIRUAN

0 2 15