In the Summary of Servers screen, select the Control tab. Select AdminServeradmin in the table and then click Shutdown. Starting and Validating the WLS_WSM1 Managed Server Expand the Environment node in the Domain Structure window. Choose Servers. The Sum

Creating a Domain 4-13 4.11 Disabling Host Name Verification for the Oracle WebLogic Administration Server and the WLS_WSM1 Managed Server This step is required if you have not set up the appropriate certificates to authenticate the different nodes with the Administration Server see Chapter 7, Setting Up Node Manager . If you have not configured the server certificates, you will receive errors when managing the different WebLogic Servers. To avoid these errors, disable host name verification while setting up and validating the topology, and enable it again once the Enterprise Deployment topology configuration is complete as described in Chapter 7, Setting Up Node Manager. Perform these steps to disable host name verification: 1. Log in to Oracle WebLogic Server Administration Console.

2. Click Lock and Edit.

3. Expand the Environment node in the Domain Structure window.

4. Click Servers. The Summary of Servers page appears.

5. Select AdminServeradmin in the Names column of the table. The Settings page

for AdminServeradmin appear.

6. Click the SSL tab.

7. Click Advanced.

8. Set Hostname Verification to None.

9. Click Save.

10. Repeat steps 4 to 8 for the WLS_WSM1 server. 11. Save and activate the changes. 12. The change requires restart of the Administration Server to be effective. To do this, complete these steps:

a. In the Summary of Servers screen, select the Control tab.

b. Select AdminServeradmin in the table and then click Shutdown.

c. Start the Administration Server again using the procedure in Section 4.7, Starting the Administration Server on SOAHOST1.

4.12 Starting and Validating the WLS_WSM1 Managed Server

Perform these steps to start the WLS_WSM1 managed server and check that it is configured correctly: 1. Start the WLS_WSM1 managed server using the Oracle WebLogic Server Administration Console as follows:

a. Expand the Environment node in the Domain Structure window.

b. Choose Servers. The Summary of Servers page appears.

c. Click the Control tab.

d. Select WLS_WSM1 and then click Start.

2. Verify that the server status is reported as Running in the Admin Console. If the server is shown as Starting or Resuming, wait for the server status to change to Started. If another status is reported such as Admin or Failed, check the 4-14 Oracle Fusion Middleware Enterprise Deployment Guide for Oracle WebCenter server output log files for errors. See Section 11.6, Troubleshooting for possible causes. 3. Access http:SOAHOST1:7010wsm-pm.

4. Click Validate Policy Manager. A list of policies and assertion templates available

in the data store appear.

4.13 Propagating the Domain Configuration to SOAHOST2 Using the unpack Utility