Curve Tracer Using Microcontroller.

(1)

CURVE TRACER USING MICROCONTROLLER

ASYRAF TAQIUDDIN BIN AHMAT TAHIR

This report is submitted in partial fulfillment of the requirements for the award of Bachelor of Electronic Engineering (Industrial Electronics) With Honors

Faculty of Electronic and Computer Engineering Universiti Teknikal Malaysia Melaka

(2)

UNIVERSTI TEKNIKAL MALAYSIA MELAKA

FAKULTI KEJURUTERAAN ELEKTRONIK DAN KEJURUTERAAN KOMPUTER

BORANG PENGESAHAN STATUS LAPORAN PROJEK SARJANA MUDA II

Tajuk Projek : _{CURVE TRACER ADAPTER USING MICROCONTROLLER}

Sesi

Pengajian : 2011/2012

Saya ASYRAF TAQIUDDIN BIN AHMAT TAHIR

mengaku membenarkan Laporan Projek Sarjana Muda ini disimpan di Perpustakaan dengan syarat-syarat kegunaan seperti berikut:

1. Laporan adalah hakmilik Universiti Teknikal Malaysia Melaka.

2. Perpustakaan dibenarkan membuat salinan untuk tujuan pengajian sahaja.

3. Perpustakaan dibenarkan membuat salinan laporan ini sebagai bahan pertukaran antara institusi pengajian tinggi.

4. Sila tandakan ( √ ) :

SULIT* (Mengandungi maklumat yang berdarjah keselamatan atau kepentingan Malaysia seperti yang termaktub di dalam AKTA RAHSIA RASMI 1972)

TERHAD* (Mengandungi maklumat terhad yang telah ditentukan oleh _{organisasi/badan di mana penyelidikan dijalankan)}

TIDAK TERHAD

Disahkan oleh:

__________________________ ___________________________________

(TANDATANGAN PENULIS) (COP DAN TANDATANGAN PENYELIA)

Alamat :NO 11, JALAN KANTANSARI 2, BANDAR SUNGAI BUAYA, 48010 RAWANG, SELANGOR.

(3)

iii

“I hereby declare that this report is the result of my own work except for quotes as cited in the reference”

Signature : ………..

Author : ASYRAF TAQIUDDIN BIN AHMAT TAHIR Date : 15 JUNE 2012

(4)

“I hereby declare that I have read this report and in my opinion this report is sufficient in terms scope and quality for the award of Bachelor of Electronic Engineering (Industrial

Electronics) With Honours”

Signature : ………

Name : PROFESSOR ABDUL HAMID BIN HAMIDON

(5)

Special dedication to my beloved parents, Ahmat Tahir Bin Ismail and Faezah Binti Musran, my siblings, my friend Amar „Asif, and all my dearest friends and my kind

(6)

ACKNOWLEDGEMENTS

Special thanks to my supervisor, Professor Abdul Hamid Bin Hamidon for his support, idea, knowledge and sharing his experience to fulfill the objective of this final year project. With his support I gain knowledge from this project. I have learned a lot of project management skill which include the time and cost effective to realize the project.

Also thanks to my friend for spending their time teaching me about the Microcontroller programming and teaching me about visual basic.net, which seems to be very difficult for me to understand before. Million thanks to all my friends that giving me so much supports to obtain the output of this project.

Lastly, thank you to all of my family that has spending many time and money to give a never-ending support. Without them my life would be nothing

(7)

vii

ABSTRACT

This project is to design a semiconductor characteristic curve tracer using microcontroller. General purpose microcontroller as they are called is a very handy computer-on-chip that can be used to simplify digital design. A curve tracer requires a sawtooth and a staircase waveform to trace the characteristic curves of a semiconductor device on an LCD or oscilloscope screen. The microcontroller simplifies the design of these required waveform. Thus, using a microcontroller programming developed in arduino a cheap, portable and reliable curve tracer can be developed.

The curve tracer is a useful tool for looking at semiconductor characteristic and obtain their parameters. Curve tracer are useful for technician for detecting good and suitable devices for circuit design. The microcontroller used is ATmega2560 and software is based on arduino.

(8)

viii

ABSTRAK

Projek ini bertujuan untuk mereka penyurih lengkung cirian semikonduktor menggunakan mikropengawal. Mikropengawal tujuan umum merupakan sebuah komputer di cip yang boleh digunakan untuk memudahkan reka bentuk digital. Penyurih lengkung memerlukan gelombang gerigi dan gelombang tangga untuk mengesan lengkung ciri satu peranti semikonduktor di LCD atau di skrin osiloskop. Mikropengawal memudahkan reka bentuk gelombang tersebut. Oleh itu, menggunakan pengaturcaraan mikropengawal yang dibangunkan dalam arduino, satu penyurih lengkung yang murah, mudah alih dan boleh dipercayai boleh dibangunkan.

Penyurih lengkung ialah satu alat yang berguna untuk melihat cirian semikonduktor dan mendapatkan parameter mereka. Penyurih lengkung berguna untuk juruteknik untuk mengesan komponenyang baik dan sesuai untuk rekabentuk litar. Mikropengawal yang digunakan ialah ATmega2560 dan perisian berdasarkan kepada arduino.

(9)

CONTENTS

CHAPTER TITLE PAGES

PROJECT TITLE i

DECLARATION FORM DECLARATION

ii iii

SUPERVISOR DECLARATION iv

DEDICATION v

ACKNOWLEDGEMENT vi

ABSTRACT ABSTRAK

vii viii

CONTENTS ix

TABLE LIST xiii

FIGURE LIST xiv

ABBREVIATIONS LIST xvi

APPENDIX LIST xvii

I INTRODUCTION

1.1 Introduction of the project 1-3

1.2 Problem Statement 3

1.3 Objective of the Project 4

1.4 Scope of the Project 4

(10)

x II LITERATURE REVIEW

2.1 Curve Tracer 6-9

2.2 B1505A Features and Benefits 7-9

2.3 Introduction to Arduino Mega2560 Microcontroller 10-11

2.3.1 Memory 12

2.3.2 Input / Output 13-14

2.4 Graphic LCD 15

2.4.1 KS0108 GLCD Library 16

2.5 Arduino Compiler 17

2.8 Visual Basic.net 18

III PROJECT METHODOLOGY

3.1 Project Methodology 19

3.2 Project Methodology Flow Chart 20-21

3.4 Project Construction 22

3.3.1 Sawtooth and Staircase using Microcontroller 22 3.3.2 PWM

PCB design using ARES 7.0 Professional

22 3.3.3 Staircase Generator using PWM 24 3.3.4 Sawtooth Generator using PWM 25 3.3.5 Measuring Voltage and Current using Microcontroller

27-29

3.3 PCB Design 30-31

(11)

xi IV RESULT AND DISCUSSION

4.1 Results 32

4.1.1 Characteristic Curve in Visual Basic.net schematics

33-36 4.1.2 Characteristic Curve using Graphic LCD 37

V CONCLUSION AND RECOMMENDATION

5.1 Conclusion 40

5.1 Recommendation for further development 41

REFERENCES 42

APPENDIX A 43

APPENDIX B 44-45

APPENDIX C 46

(12)

xii

FIGURE LIST

FIGURE TITLE PAGES

2.1 The B1505A Agilent Curve Tracer 6

2.2 ATmega2560 11

2.3 Summary of Pins 14

2.4 Graphic LCD KS0108 15

2.5 Pin mapping GLCD with Arduino 16

2.6 Arduino 1.0 compiler 17

2.7 Visual Basic 2010 Ultimate edition 18

3.1a Project Methodology Flowchart 20

3.1b Project Methodology Flowchart 21

3.2 PWM 23

3.3 PWM Staircase 24

3.4 First working mode: Left Align 25

3.5 PWM Sawtooth 25

3.6 Non Inverting Amplifier 27

3.7 Block Diagram of Operation 28

3.8 Circuit Diagram 29

3.9 ADC Value 29

3.10 3D Visualization 30

3.11 PCB Layout 31

3.12 Program Interface 32

(13)

xiii

4.2 Led Diode characteristic curve 33

4.3 BC107 NPN characteristic curve 34

4.5 C1815 NPN characteristic curve 35

4.6 BC178 PNP Transistor characteristic curve 36

4.7 1N4007 Diode characteristic curve 37

4.8 Led Diode characteristic curve 37

4.9 BC107 NPN characteristic curve 38

4.10 C1815 NPN characteristic curve 38

4.11 BC178 PNP Transistor characteristic curve 39

(14)

xiv

LIST OF ABBREVIATIONS

PCB - Printed Circuit Board RF - Radio Frequency

Rx - Receiver

Tx - Transmitter

IC - Integrated Circuit LED - Light Emitting Diode ADC - Analog Digital Converter

I/O - Input/ Output

RAM - Random Access Memory

EEPROM - Electrically Erasable Programmable Read-Only Memory PSM - Projek Sarjana Muda

(15)

APPENDIX LIST

APPENDIX TITLE PAGES

A Graphic LCD Pin Mapping 43

B ATmega2560 coding 44-45

C BC170 Datasheet 46

(16)

CHAPTER I

INTRODUCTION

This chapter is a brief about the introduction of the project. It states the purpose, objective of the project. The scope of project, problem statements and advantages to be acquired from the project is also mentioned.

1.1 Introduction of the project

A semiconductor curve tracer is a specialised piece of electronic test equipment used to analyse the characteristics of discrete semiconductor devices such as diodes, BJT, FETs and thyristors. The device contains voltage and current sources that can be used to stimulate the device under test (DUT) and display the characteristic curve on an oscilloscope.

The basic operating principle of the device is to apply a swept (automatically varying) voltage to the main terminals of the DUT while measuring the amount of current that the device permits to flow. This so-called V-I (voltage versus current) graph is displayed on an oscilloscope screen. The operator can control the maximum amount of voltage applied to the device, the polarity of the voltage applied (including the automatic application of both positive and negative polarities), and the load resistance inserted in series with the device.

(17)

2 For two terminal devices (such as diodes and DIACs), this is sufficient to fully characterize the device. The curve tracer can display all of the interesting parameters such as the diode's forward voltage, reverse leakage current, reverse breakdown voltage, and so on. For triggerable devices such as DIACs, the forward and reverse trigger voltages will be clearly displayed. The discontinuity caused by negative resistance devices (such as tunnel diodes) can also be seen. The main terminal voltage can often be swept up to several thousand volts with load currents of tens of amps available at lower voltages. Three-terminal devices require an additional connection; this is usually supplied from a stepped voltage or current source attached to the control terminal of the DUT. By sweeping through the full range of main terminal voltages with each step of the control signal, a family of V-I curves can be generated. This family of curves makes it very easy to determine the gain of a transistor or the trigger voltage of a thyristor or TRIAC. For most devices, a stepped current is used. For field effect transistors (FET), a stepped voltage is used instead.

Curve tracers usually contain convenient connection arrangements for two- or three-terminal DUTs, often in the form of sockets arranged to allow the plugging-in of the various common packages used for transistors and diodes. Most curve tracers also allow the simultaneous connection of two DUTs; in this way, two DUTs can be "matched" for optimum performance in circuits (such as differential amplifiers) which depend upon the close matching of device parameters. This can be seen in the image to the right where a toggle switch allows the rapid switching between the DUT on the left and the DUT on the right as the operator compared the respective curve families of the two devices.

I-V curves are used to characterize devices and materials through DC source-measure testing. These applications may also require calculation of resistance and the derivation of other parameters based on I-V measurements. For example, I-V data can be used to study anomalies, locate maximum or minimum curve slopes, and perform reliability analyses. A typical application is finding a semiconductor diode’s reverse bias leakage current and doing forward and reverse bias voltage sweeps and current measurements to generate its I-V curve.

(18)

3 The curve tracers are professional and specialized instruments. They are indispensable for the research and development of new and better electronic equipment. This means that these instruments are required for the laboratories and engineers, but also for the electronic enthusiast. With this kind of instrument the designer will get the best results ever obtained but the price of a good curve traver are very expensive, its burden to a electronic enthusiast and students. By introducing Curve Tracer Adapter using Microcontroller, it will ensure a good news to whom seeks a reliable, compact and cheaper curve tracer for equipment troubleshooting.

1.2Problem Statement

Curve tracer, even adapters, are rather bulky and costly. In fact, good standalone curve tracers are very expensive. This are the problems that make people think twice in buying a realible curve tracer. Generally, the solutions to the problems that were carried out in this project are:

 To innovate a new form of curve tracer design

 Can be constructed at a very low cost

(19)

4 1.3Objective of the Project

The objectives of this investigation are:

 To design a curve tracer using a Microcontroller

 To use the curve tracer to display semiconductor characteristic on computer and standalone display

1.4Scope of the Project

In order to achieve the objective of the project, there are several scope had been outlined. The scope of this project includes using arduino compiler to program microcontroller ATmega2560, build hardware for the system, and interface the hardware to computer by using serial port communication and Graphic LCD. A graph of Collector to Emitter voltage versus collector current obtained by using Visual Basic 2010.

1.5Scope of Study

The scope of study consists of review about curve tracer that available in market. The ways of the curve tracer plotting the characterization curve of semiconductor. Design a simple circuit for curve tracer. Finding a way to generate ramp and staircase waveform by using Microcontroller. Designing a program using Visual Basic to plot the graph of characterization curve of semiconductor.

(20)

CHAPTER II

LITERATURE REVIEW

In this chapter, it will discuss about the literature review which it contains the information gathered to gain knowledge and ideas in completing the project. There are several sources that have been taken as a resource such as Books, Thesis, Journal and Website.

It is included the operation of the circuit, the hardware and software which is useful in the project.

(21)

2.1 CURVE TRACER

A semiconductor tracer basically functions as a signal generator. It apply a test signal to the semiconductor under test and display the curves on a scope.

Figure 2.1: The B1505A Agilent Curve Tracer

The B1505A is the only single-box solution that can function as a curve tracer replacement due to its ability to accurately evaluate and characterize power devices at up to 3000 volts and 20 amps. It also has the ability to perform capacitance measurements at high voltage biases. For the benefit of traditional curve tracer users, the B1505A includes a curve tracer mode that combines familiar curve tracer functionality with the convenience of a PC-based instrument. The net result is improved ease of use, better data analysis and simplified data management

(22)

7 2.2 B1505A Features and Benefits

A single-box solution with 3000 V/20 A capability

The B1505A is the only single box solution available today with the capability to characterize high power devices from the sub-picoamp level up to 3000 volts and 20 amps. The B1505A has separate modules that support high-current (HCSMU) and high-voltage (HVSMU). The B1505A also supports a high-power SMU (up to 1 A/200 V) and a multifrequency capacitance measurement unit (up to 5 MHz).

Accurate force/measure capability up to 3000 volts

Power devices using new materials such as SiC or GaN require higher breakdown voltage measurement capabilities than do conventional power device. In addition, there are no solutions available that can measure leakage currents at high voltage biases with sufficient resolution and accuracy. The B1505A’s HVSMU supports breakdown measurements up to 3000 V, and its ability to also measure leakage currents in the sub picoamp range at 3000 V bias is far superior to existing solutions that can only measure down to the microamp level.

50 microsecond current pulse width at high current

Device self-heating due to large applied currents distorts measurement results and it is a big concern for power devices such as PMICs. Proper characterization of device on-resistance (Ron) requires high measurement accuracy and resolution, but device self-heating can completely distort this sensitive measurement. The B1505A’s HCSMU can force a 20 A current pulse as narrow as 50 microseconds, which is sufficient to avoid the deleterious effects of device self-heating thereby enabling the user to perform these sensitive measurements.

(23)

8 In order to properly evaluate the switching characteristics of power devices, it is important to measure drain-source capacitance and junction capacitance, and to extract the basic physical parameters of the device. Using a high-voltage bias-T (available from Agilent), the HVSMU and MFCMU can be used together to perform capacitance measurements at biases of up to 3000 V. This makes the B1505A the first solution in the industry capable of performing capacitance measurements at this level of voltage bias.

Quick measurement via the curve tracer mode

The B1505A software environment allows users to check device characteristics and detect device faults with the easy convenience of a curve tracer. Just like on a curve tracer, the B1505A supports rotary knob control of the independent sweep variable for intuitive and real-time evaluation of parameters such as breakdown voltage. The measurement setup information and data can be automatically stored to the B1505A’s built-in hard disk drive and transferred to USB memory sticks as well as other portable storage devices. It is also easy to print graphical measurement data and to copy and paste it into reports when the analysis results are summarized.

Easy-to-use Windows PC-based

EasyEXPERT software incorporates data management functions The B1505A, which uses the same PC-based EasyEXPERT software as Agilent’s popular B1500A Semiconductor Device Analyzer, allows users to get measurement results quickly and easily. Device parameters can be automatically analyzed using the auto-analysis function and displayed on the screen when the measurement is done. Application tests for power device characterization are also included with the EasyEXPERT software.

(24)

9 On-wafer testing and prober control

On-wafer power device testing faces many obstacles. The need to disable interlock in order to connect cables from equipment to the wafer prober creates many safety concerns. It is also highly desirable that the measurement instrument have a prober driver to permit automated testing in conjunction with the on-wafer measurements. The B1505A provides both a standard cable and interlock mechanism (to permit safe prober connections) and driver support for a variety of semiautomatic wafer probers. These features make it possible to replace time consuming packaged device testing with safe and efficient on-wafer testing, thereby drastically reducing the TAT (turnaround- time) and decreasing overall cost.

(1)

The objectives of this investigation are:

 To design a curve tracer using a Microcontroller

 To use the curve tracer to display semiconductor characteristic on computer and standalone display

1.4 Scope of the Project

1.5 Scope of Study

(2)

CHAPTER II

LITERATURE REVIEW

It is included the operation of the circuit, the hardware and software which is useful in the project.

(3)

2.1 CURVE TRACER

A semiconductor tracer basically functions as a signal generator. It apply a test signal to the semiconductor under test and display the curves on a scope.

Figure 2.1: The B1505A Agilent Curve Tracer

(4)

2.2 B1505A Features and Benefits

A single-box solution with 3000 V/20 A capability

Accurate force/measure capability up to 3000 volts

50 microsecond current pulse width at high current

(5)

important to measure drain-source capacitance and junction capacitance, and to extract the basic physical parameters of the device. Using a high-voltage bias-T (available from Agilent), the HVSMU and MFCMU can be used together to perform capacitance measurements at biases of up to 3000 V. This makes the B1505A the first solution in the industry capable of performing capacitance measurements at this level of voltage bias.

Quick measurement via the curve tracer mode

Easy-to-use Windows PC-based

(6)

On-wafer testing and prober control

Curve Tracer Using Microcontroller.

Parts

Dokumen yang terkait

Solar Watering System Using Microcontroller.

Combine Infrared Lock-In Thermography And Curve Tracer Into An Integrated System.

Programmable Socket Using Pic Microcontroller.

Dot Matrix LED Using Microcontroller.

Wireless Smoke Detector Using Microcontroller.

Plate Dispenser Using PIC Microcontroller.

Smart Home Security System Using Microcontroller.

Infrared Robotic Using Microcontroller.

1.1.8 Packet Tracer Using Traceroute

Automatic Fish Feeder Using Microcontroller

Dukungan

Links

Curve Tracer Using Microcontroller.

Parts

Dokumen yang terkait

Solar Watering System Using Microcontroller.

Combine Infrared Lock-In Thermography And Curve Tracer Into An Integrated System.

Programmable Socket Using Pic Microcontroller.

Dot Matrix LED Using Microcontroller.

Wireless Smoke Detector Using Microcontroller.

Plate Dispenser Using PIC Microcontroller.

Smart Home Security System Using Microcontroller.

Infrared Robotic Using Microcontroller.

1.1.8 Packet Tracer Using Traceroute

Automatic Fish Feeder Using Microcontroller

Dokumen yang Anda mencari sudah siap untuk unduhkan