OPTIMASI LEBAR BANGUNAN PELIMPAH (SPILLWY) DAN TINGGI BENDUNGAN PADA BENDUNGAN BULIA DI KABUPATEN GORONTALO

OPTIMASI LEBAR BANGUNAN PELIMPAH (SPILLWY) DAN
TINGGIBENDUNGAN PADA BENDUNGAN BULIA DI
KABUPATENGORONTALO
Oleh: SAJIMANSYAH ( 00520122 )
Civil Engineering
Dibuat: 2007-09-28 , dengan 3 file(s).

Keywords: Optimasi, Spillway, Tubuh Bendungan, Ekonomis
ABSTRAKSI

Bendungan bulia pada propinsi Gorontalo ini merupakan bendungan dengan type urugan yang
mana bendungan type ini sangat lemah terhadap limpasan. Guna menghindari hal tersebut, maka
bendungan type urugan ini harus dilengkapai bangunan pelimpah yang digunakan untuk
pelimpah debit banjir dan pemecahan kenaikan elevasi muka air yang mungkin dapat
mengakibatkan limpasan-limpasan diatas mercu bendungannya, Berdasarkan petunjuk
perencanaan teknis bangunan pelimpah dan tinggi bendungan dapat berfungsi secara efektif
sebagai penampung dan menaikkan tinggi muka air, maka kajian ini dirumuskan Berapa besar
Debit bajir rencana kala ulang 1000 tahun (Q1000) dan Debit bajir maksimum (QPMF), Berapa
besar lebar optimum bangunan pelimpah ditinjau dari aspek ekonomi dan Berapa besar tinggi
efektif bendungan optimum ditinjau dari aspek ekonomi dengan 5 alternatif lebar pelimpah yaitu
18, 22, 26, 30 dan 35 m.

Dari hasil analisa data hidrologi didapatkan Q1000 adalah 134.075 m3/dt. Adapun data teknis
bendungan sebagai dasar perhitungan biaya adalah tinggi HWL + 127.88, tinggi NWL + 126.00,
dan tinggi LWL + 116.00, dan tinggi mercu bendung adalah pada elevasi + 131.00. Sedangkan
untuk saluran pelimpah direncanakan dengan lebar 25 meter pada elevasi 126.00.
Dari hasil analisa optimasi didapat lebar optimm yaitu dengan lebar pelimpah 35 m biaya Rp.
11.599.255.011,23 sedangkan untuk tinggi tubuh bendungan yang dibutuhkan untuk lebar
pelimpah 35 meter adalah 23 m dengan biaya Rp. 18.602.548,562.09

Abstract
Dam bulia in Gorontalo province is a dam with type urugan which type dam is very weak against runoff.
To avoid this, the dam of this type should dilengkapai urugan the overflow structure that is used for
solving the overflow discharge and increased flood water surface elevation that may result in runoffrunoff dam above the tree top, Under the guidance of technical planning and building height dam
overflow can function effectively as a container and raise the water level, then this study formulated a
plan How much discharge flood back 1000 years time (Q1000) and the maximum flood discharge
(QPMF), How big is the optimum width of the overflow building as viewed from the economic and
effective dam height How big is the optimum review from the economy with 5 alternative overflow
width is 18, 22, 26, 30 and 35 m.
From the results of analysis of hydrological data is obtained Q1000 134 075 m3/sec. The technical data

as the basis for the calculation of cost containment is high HWL + 127.88, high NWL + 126.00, and high

LWL + 116.00, and the high tree top weir is at elevation + 131.00. As for the overflow channel is planned
with a width of 25 meters at an elevation of 126.00.
From the analysis of optimization obtained optimm wide by 35 m wide overflow costs Rp.
11,599,255,011.23 while for the high dam body is needed for the overflow of 35 meters width is 23 m at
a cost of Rp. 18.602.548,562.09