7-4 Oracle Fusion Middleware Installation Guide for Oracle Enterprise Content Management Suite
7.1.1.2.2 Configuring Oracle Content Server 10g to Work with Oracle IPM You need to
configure Oracle Content Server before it can work with Oracle IPM. During the configuration, restart Oracle Content Server whenever prompted to do so.
To configure Oracle Content Server 10g to work with Oracle IPM: 1.
Update the IP address filter:
a.
On the system where Oracle UCM 10g is installed, run the following command:
UNIX command: UCM_ORACLE_HOMEbinSystemProperties
Windows command: UCM_ORACLE_HOME\bin\SystemProperties
b.
With your system’s DISPLAY environment variable set to a valid X Server, click the Server tab in the display.
c. In the IP Address Filter field, add a vertical bar | followed by the IP address
of the system where Oracle IPM is installed. For example: 192.0.2.1|192.0.2.130
The IP address is required for the Oracle IPM system to have access to the Oracle UCM system without authentication.
d. Click OK.
This change will require a restart of Oracle Content Server, which you can do at the end of this procedure, after installing the Oracle UCM components.
2.
Open the Oracle UCM web client in a web browser http:managedServerHost:managedServerPortlocation, such as
http:myhost.example.com:8000idc, and log in.
3. Open the Administration tray.
4.
Upgrade the default file store:
a. Under Administration, select Providers.
b. Select Info in the Action column of the DefaultFileStore row.
c. When asked if you want to upgrade the file store, click Upgrade, and then
click Update in the Edit File Store Provider dialog box.
Oracle UCM does the upgrade automatically. Oracle IPM content is not accessible in a web store. Oracle Content Server
traditionally uses a weblayout directory on a file system to store content in a format for viewing in a web browser, but this feature does not have much use in
an Oracle IPM solution and uses extra disk space. After the file store upgrade, you should disable the weblayout functionality in Oracle Content Server for any
file store provider configured for use as an Oracle IPM volume.
5.
Configure system properties:
a.
Confirm that the SearchIndexerEngineName variable matches the type of Oracle UCM system to use DATABASE.METADATA, DATABASE.FULLTEXT, or
OracleTextSearch.
b. Under Administration tray, select Admin Server.
c. Click idc.
d. Select General Configuration, on the left.
Configuring Oracle Imaging and Process Management 7-5
e. Select Automatically assign a content ID on check in.
