RFI Short Form Catalogue

  RFI Short Form Catalogue

Base Antennas

  NSW

  99 Station Road Seven Hills NSW 2147 Phone: (02) 8814 2300 Fax: (02) 9630 0844

  VIC

  46 Corporate Boulevard Bayswater VIC 3153 Phone: (03) 9751 7500 Fax: (03) 9751 7588 WA 4/45 Tomlinson Road Welshpool WA 6106 Phone: (08) 9331 0600 Fax: (08) 9311 0688 QLD and International Sales

  30 Raubers Road Banyo QLD 4014 Phone: (07) 3621 9400 Fax: (07) 3252 5505

• The latest in antenna design software
• Specialised test equipment
• An enormous depth of experience providing solutions to carriers, manufacturers and end users
• A flexible manufacturing environment for base and mobile antennas And we can supply everything else you need to complete your system. Antenna combining equipment, repeaters, coaxial cables, connectors, lightning protection, solar power, DC power supplies, hand portable antennas, installation accessories…and more! This catalogue is intended as our abbreviated guide to RFI’s range of base station antennas. Our most up to date information is always on our website and we encourage you to utilise it when needed or alternatively contact one of our sales specialists for any further

  information you may require.

  RFI EMEA (UK) Bicester Innovation Centre Commerce House Telford Road Bicester OX26 4LD United Kingdom Phone: +44 (0) 1869 255 772 RFI Americas 9329 Ravenna Road Suite C Twinsburg OH 44087 USA Phone: +1 330 486 0706 Fax: +1 330 486 0705 RFI New Zealand PO Box 38-626 Howick Auckland NZ Phone: +64 9 537 2683 Fax: +64 9 537 2684

  RFI have been supporting Australian and international customers with unique base station antenna designs for over 30 years. The comprehensive range caters to frequencies from 27MHz to 5800MHz and includes dipole arrays, collinears, yagis, side mount dipoles, corner reflectors and phasing harnesses. The latest patented Meander

  TM line collinear and corporate collinear designs rewrite the rules on bandwidth and performance.

  We strive to provide a service that is of world standard yet retain the agility of a small player. Our motivated team of engineering and manufacturing professionals pride themselves on their design philosophy of “bettering the best”. Our experience pays off when new technologies require an antenna solution that matches the

latest in sophisticated design.

  RFI utilises:

  RFI

Local Support

International Support

  Contents Ground Plane Antennas page 4 Coaxial Dipole Antennas page

  6 Side Mounted Dipole Antennas page 8 Dipole Array Antennas page 10 Screened Dipole Antennas page 14 Collinear Antennas page

  16 Meander - Design page

  17

• Manufactured to Frequency Designs page 19 Corporate Design page

  20 - Yagi Antennas page

  22 Wireless Broadband Antennas page 26

Ground Plane Antennas

  For complete, up to date product specifications on individual items please visit www.rfi.com.au

  The GP series is a range of omnidirectional unity gain adjustable ground plane antennas ideal for local area coverage when a high gain antenna is not required or justified. The broad vertical beamwidth offers excellent null fill for consistent signal coverage. GP series antennas are easily

tuned in the field by adjusting the positions of the ground plane elements. Ground Plane Antennas 70-175 MHz Special Features

• Simple field tuning by adjusting the position of • Compact - shipped disassembled for ease of the radials

  handling

• Lightweight and easy to mount • Flexible finishes alodined (STD) black powder
• Broad vertical beamwidth for excellent null fill coated or stainless steel construction GP1 E Plane

  Operating Bandwidth

  75

  76

  77

  78

  79

  80

  81

  82

  83

  84

  85 ( ) GP1 Typical Response VSWR

  

Frequency MHz Gain dBi (dBd) Tuned Bandwidth MHz Model

  70-85 2 (0)

  5 GP1 118-136 2 (0)

  10 GP3 137-151 2 (0)

  10 GP4 148-175 2 (0)

  15 GP2

  For complete, up to date product specifications on individual items please visit www.rfi.com.au

Coaxial Dipole Antennas

  For complete, up to date product specifications on individual items please visit www.rfi.com.au

  Our range of vertical enclosed dipoles are unity gain VHF and UHF antennas ordered to specific frequencies for either simplex or duplex operation. These antennas provide low wind and tower loading with excellent omnidirectionality and null fill characteristics.

Special Features

• Low wind and tower loading
• DC grounded for lightning protection and the reduction of precipitation static noise
• Unity gain omnidirectional radiation pattern with excellent null-fill characteris
• Models available in ruggedised construction with heavy duty black fibreglass radome - aiding in ice shedding
• Models available with stainless steel mounting section for corrosive environments

  Frequency MHz Gain dBi (dBd)

  400-420 2 (0) Full band

  COD2 E Plane COD2 Typical VSWR Response COD4 COD22 COD1

  ( ) 155 156 157 158 159 160 161 162 163 164 165 Operating Bandwidth

  80 MHz Variable Custom manufactured to 4% of bandwidth COD8-99

  0.8 COD8-82 600-960 2 (0)

  0.8 COD8-81 850-930 2 (0) Full band

  0.9 COD4-72 375-520 2 (0) 4% Variable Custom manufactured to 4% of bandwidth COD4-99 820-880 2 (0) Full band

  0.9 COD4-63 500-520 2 (0) Full band

  0.9 COD4-71 480-500 2 (0) Full band

  0.9 COD4-70 470-490 2 (0) Full band

  1 COD4-65 450-470 2 (0) Full band

  1.7 Stainless steel mounting tube for corrosive environments COD24

  Bandwidth Length

m

  For complete, up to date product specifications on individual items please visit www.rfi.com.au Coaxial Dipole Antennas 30-960 MHz

  1.8 Ruggedised black radome for ice shedding COD22 140-205 2 (0)

  5 MHz

  1.7 COD2 140-175 2 (0)

  5 MHz

  2.7 COD14 140-205 2 (0)

  3.0 COD12 66-142 2 (0) 5%

  3.4 COD1 66-141 2 (0) 5%

  5.5 COD30 66-140 2 (0) 2%

  30-50 2 (0) 1%

  Special Features Model

  5 MHz

  

Side Mounted Dipole Antennas

The SMD series of side mount dipoles are a range of broadband unity gain dipoles which can be used as a single antenna for short range applications or, if desired, phased together to provide high gain array coverage characteristics.

  For complete, up to date product specifications on individual items please visit www.rfi.com.au Side Mounted Dipole Antennas 70-960 MHz Special Features

• Can be phased to provide 3dBd or 6dBd gain • Models available with 7/16 DIN or N-type in a variety of patterns tailored to suit specific connectors

  requirements • Low PIM rating of side mount dipoles feature

• High strength ruggedised and stainless steel <-150dBc specification versions available • Superior lightning protection characteristics

• • Full bandwidth coverage for both single antennas • An extensive range of phasing harnesses available

  and phased arrays - ideal in community sites

  Operating Bandwidth 140 144 148 152 156 160 164 168 172 176 180

  ( ) SMD20-41 H Plane SMD20-41 Typical

  VSWR Response

H Plane at ¼ wave antenna

to mast spacing

  

Standard Range of Side Mounted Dipoles

Frequency MHz Gain dBi (dBd) Bandwidth Description Model

  70-85 2 (Unity) Full band Heavy duty aluminium SMD1 70-85 2 (Unity) Full band Heavy duty black powder coated aluminium for ice shedding SMD12 70-85 2 (Unity) Full band Stainless steel SMD14

  66-108 2 (Unity) 10% Heavy duty aluminium SMD1-99 148-175 2 (Unity) Full band Heavy duty aluminium SMD2 148-175 2 (Unity) Full band Heavy duty black powder coated aluminium for ice shedding SMD22 148-175 2 (Unity) Full band Stainless steel SMD24 108-200 2 (Unity) 10% Heavy duty aluminium SMD2-99 746-870 2 (Unity) Full band Welded alodined aluminium SMD7-90 806-960 2 (Unity) Full band Welded alodined aluminium SMD8-90

Low PIM Range of Side Mounted Dipoles

  70-85 2 (Unity) Full band Welded alodined aluminium SMD10-28 130-150 2 (Unity) Full band Welded alodined aluminium SMD20-36 148-174 2 (Unity) Full band Welded alodined aluminium SMD20-41-DIN 400-520 2 (Unity) Full band Welded alodined aluminium SMD4-67 400-520 2 (Unity) Full band Stainless steel SMD41-67 360-600 2 (Unity) 20% Welded alodined aluminium SMD4-99 360-600 2 (Unity) 20% Stainless steel SMD41-99

  For complete, up to date product specifications on individual items please visit www.rfi.com.au

  For complete, up to date product specifications on individual items please visit www.rfi.com.au Dipole Array Antennas

  Ever increasing costs and site density requirements are reducing the availability of antenna positions on prime sites. In order to reduce the overall number of antennas the RFI dipole array series provide systems engineers

and site owners with a flexible solution to

reduce antenna numbers.

  BA8080-67 Antennas on Empire State Building - New York City Dipole Array Antennas 136-520 MHz

Special Features

• All welded construction
• Internally routed hermetically sealed silver plated PTFE phasing harness
• Operates over the entire band with no need for tuning or adjustment
• 100% anechoic chamber tested and certified to industry leading low PIM (-150 dBc) de
• High power handling up to 750W (VHF) 500W (UHF)
• Fixed electrical downtilit available on request
• VSWR of <1.5:1 across entire band
• Superior lightning protection characteristics
• Available with 7/16 DIN or N-type connectors
• Flexible finishes alodined (STD) black powder coated or stainless steel construction BA Omnidirectional Pattern EA Elliptical Pattern OA Offset Pattern

  Frequency MHz

  2

  8

  3.0 EA80-57 400-520 7 (5)

  4

  2.1 EA40-67 400-520 11 (9)

  8

  3.0 EA80-67 EA (Elliptical) models

  Frequency MHz

  Gain dBi (dBd)

  Dipoles Length m

  Model 136-174 7 (5)

  3.5 OA20-41 136-174 11 (9)

  4

  4

  6.3 OA40-41 330-420 7 (5)

  2

  2.1 OA20-57 330-420 11 (9)

  4

  3.0 OA40-57 400-520 7 (5)

  2

  2.1 OA20-67 400-520 11 (9)

  4

  3.0 OA40-67 OA (Offset) models

  2.1 EA40-57 330-420 11 (9)

  6.3 EA80-41 330-420 7 (5)

  Gain dBi (dBd)

  4

  Dipoles Length m

  Model 136-174 5 (3)

  4

  3.5 BA40-41 136-174 8 (6)

  8

  6.3 BA80-41 330-420 5 (3)

  4

  2.1 BA40-57 330-420 8 (6)

  8

  3.0 BA80-57 400-520 5 (3)

  2.1 BA40-67 400-520 8 (6)

  For complete, up to date product specifications on individual items please visit www.rfi.com.au BA8080-67 Antennas on Empire State Building - New York City

  8

  3.0 BA80-67 400-520 11 (9)

  16

  5.0 BA160- 67-T3

BA (Omnidirectional) models

  Frequency MHz

  Gain dBi (dBd)

  Dipoles Length m

  Model 136-174 7 (5)

  4

  3.5 EA40-41 136-174 10 (8) For complete, up to date product specifications on individual items please visit www.rfi.com.au 330-520 MHz

  8

  Single Section Multiple Arrays A combination of any two dipole arrays, either omnidirectional BA models, elliptical EA models or offset OA models mounted to a common boom to effectively provide two separate antennas on the one mast. The one physical structure is in fact two individual antennas with separate feeds for each antenna.

  Combination Arrays Frequency MHz Length m Description Model

  Omnidirectional Models 330-420 3 2 x 3dBd omni with separate feeds BA4040-57 400-520 3 2 x 3dBd omni with separate feeds BA4040-67

  Elliptical Models 330-420 3 2 x 5dBd elliptical with separate feeds EA4040-57 400-520 3 2 x 5dBd elliptical with separate feeds EA4040-67

  Offset Models 400-520 3 2 x 5dBd offset with separate feeds OA2020-67

  Dual Section Combination Arrays

These arrays are supplied in two sections for ease of shipping. The lower section is made on a larger diameter

mast stock with the upper array telescoping into the lower section. Both upper and lower sections can be any

one of our standard UHF (only) arrays or can be coupled with a phasing harness for even higher gain. Each

lower section is supplied with a through harness to connect to the upper section. The image below shows a

BA80-67L lower section and a BA80-67 upper section.

  Frequency MHz Lower section length m Description Model

  Omnidirectional Models - Lower section 330-420 3 2 x 3dBd omni with separate feeds BA4040-57L

  330.420 3 1 x 6dBd omni BA80-57L 400-520 3 2 x 3dBd omni with separate feeds BA4040-67L 400-520 3 1 x 6dBd omni BA80-67L

  Elliptical Models - Lower section 330-420 3 2 x 5dBd elliptical with separate feeds

  EA4040-57L 330-420 3 1 x 8dBd elliptical EA80-57L 400-520 3 2 x 5dBd elliptical with separate feeds

  EA4040-67L 400-520 3 1 x 8dBd elliptical EA80-67L

  Offset Models - Lower section 400-520 3 2 x 5dBd offset with separate feeds OA2020-67L 400-520 3 1 x 9dBd offset OA40-67L

  When ordering a dual section combination array you will need to order as follows:

  1. Specify your lower section from the list above eg. BA80-67L PLUS

  2. Specify a single upper section array from our selection of standard dipole array antennas listed on the previous page eg. OA40-67

  For complete, up to date product specifications on individual items please visit www.rfi.com.au Combination Collinear & Dipole Arrays Similar to the dual section array, this type of combination array utilises a collinear antenna as the upper section of the array ideally suited to applications where tower loading is a consideration. The collinear fits into the lower section which can essentially be any style of our higher gain UHF (only) dipole arrays. Each lower section is supplied with a through harness to connect to your choice of COL8 (UHF), COL45 (UHF), COL15 (VHF) or COL17 (VHF) collinears. The image below shows a BX80-67 lower section with a COL8 upper section.

  Frequency MHz Lower section length m Description Model

  Omnidirectional Models - Lower section 400-520 2 1 x 3dBd omni BX40-67 400-520 3 2 x 3dBd omni with separate feeds BX4040-67 400-520 3 1 x 6dBd omni BX80-67

  Elliptical Models - Lower section 400-520 2 1 x 5dBd elliptical EX40-67 400-520 3 2 x 5dBd elliptical with separate feeds EX4040-67 400-520 3 1 x 8dBd elliptical EX80-67

  Offset Models - Lower section 400-520 3 2 x 5dBd offset with separate feeds OX2020-67 400-520 3 1 x 9dBd offset OX40-67

  When ordering a combination collinear and dipole array you will need to order as follows:

  1. Specify your lower section from the list above eg. BX80-67 PLUS

  2. Specify your COL Collinear either COL15, COL17, COL8 (and remember to specify frequency)

Screened Dipole Antennas

  For complete, up to date product specifications on individual items please visit www.rfi.com.au

  These screened dipole antennas deliver high gain and excellent front to back ratios for critical path or high interference applications.

  Constructed with a grid style back screen to maximise pattern control, these all welded screens are of alodined finish for corrosion protection and utilise stainless steel fittings.

Special Features

• High front to back ratio to allow frequency re-use by tailoring coverage areas • Shipped unassembled for ease of handling.
• Operates over the entire band with no need for tuning or adjustment
• Internally routed, hermetically sealed, silver plated PTFE cables harness
• VSWR of <1.5:1 across entire band FSA-20-67 E Plane FSA-20-67 H Plane CSA-20-67-DIN E Plane CSA-20-67-DIN H Plane
>Direct DC grounded for lightning protection and reduction of precipitation static noise
• High power handling up to 750W (VHF), 500W (UHF)

  Easily assembled on site

  69 CSA10-67-DIN 406-512 Full band 11 (9) 2.1 x 0.8

  52 CR8

  45

  60 MHz 11 (9) 0.4 x 0.4 x 0.4

  57 CR4-67 800-960

  40

  57 CR4-57 400-520 Full band 11 (9) 0.9 x 0.9 x 0.6

  40

  17 CSA40-67-DIN 330-420 Full band 10 (8) 0.9 x 0.9 x 0.6

  60

  35 CSA20-67-DIN 406-512 Full band 13 (11) 3 x 0.8

  71

  64

  Frequency MHz Bandwidth Gain dBi (dBd) Length m HBW o

  For complete, up to date product specifications on individual items please visit www.rfi.com.au Screened Dipole Antennas 136-960 MHz

  17 FSA40-67-DIN 400-520 Full band 11 (9) 3.0 167 Collinear Antennas Our extensive range of collinear antennas is available in frequency specific designs suitable for both simplex and duplex applications and in addition feature our innovative broadband low PIM patented corporate feed antennas and PCB based Meander™ technology.

  35 FSA20-67-DIN 406-512 Full band 11 (9) 3 x 0.8 135

  71 FSA10-67-DIN 406-512 Full band 8 (6) 2.1 x 0.6 132

  34 FSA20-41-DIN 406-512 Full band 7 (5) 0.5 x 0.6 121

  70 FSA10-41-DIN 148-174 Full band 11 (9) 3.5 x 1 108

  69 CR2 148-174 Full band 9 (7) 1 x 1 106

  62

  26 MHz 9 (7) 1.3 x 1.3 x 1.2

  136-174

  Model

  VBW o

  17 CRA40-67 406-512 Full band 9 (7) 0.5 x 0.8

  For complete, up to date product specifications on individual items please visit www.rfi.com.au

• Unique patented PCB circuit for excellent broadband characteristics
• Exceptional pattern stability across the entire band
• Industry leading low PIM characteristics -15
• Lightweight - ideal when tower loading is a concern
• Supplied pre-tuned in a vast range of bands
• DC grounded for lightning protection and the reduction of precipitation static noise

  1.1 COL41-65 450-470 2 (0) Full band

  Special Features 130-2170 MHz Low PIM Meander™ Design Collinear Antennas

  2.6 COL45-72

  2.7 COL45-71 490-520 8 (6) Full band

  2.8 COL45-70 470-490 8 (6) Full band

  3.1 COL45-65 450-470 8 (6) Full band

  3.4 COL45-58 400-420 8 (6) Full band

  1.7 COL43-72 380-400 8 (6) Full band

  1.8 COL43-71 450-470 6.2 (4) Full band

  1.9 COL43-70 470-490 6.2 (4) Full band

  2.0 COL43-65 450-470 6.2 (4) Full band

  2.2 COL43-58 400-420 6.2 (4) Full band

  1.1 COL41-72 380-400 6.2 (4) Full band

  1.1 COL41-71 490-520 2 (0) Full band

  1.1 COL41-70 470-490 2 (0) Full band

  1.1 COL41-58 400-420 2 (0) Full band

  For complete, up to date product specifications on individual items please visit www.rfi.com.au COL45 E Plane COL45 Typical VSWR Response

  6.0 COL54-174 380-400 2 (0) Full band

  6.5 COL54-166 162-174 7 (5) Full band

  6.5 COL54-160 156-166 7 (5) Full band

  5.1 COL53-160 150-160 7 (5) Full band

  5.0 COL53-150 150-160 6 (4) Full band

  5.5 COL53-140 140-150 6 (4) Full band

  2.1 COL51-174 130-140 6 (4) Full band

  2.2 COL51-166 162-174 2 (0) Full band

  2.2 COL51-160 156-166 2 (0) Full band

  2.1 COL51-150 150-160 2 (0) Full band

  2.2 COL51-140 140-150 2 (0) Full band

  130-140 2 (0) Full band

  Frequency MHz Gain dBi (dBd) Bandwidth Length m Model

  ( ) 460 464 468 472 476 480 484 488 492 496 500 Operating Bandwidth

  COL54 COL45 COL85

  For complete, up to date product specifications on individual items please visit www.rfi.com.au Low PIM Meander™ Design continued

  1.6 COL84-870 850-930 7 (5) Full band

  1.0 COL2195 824-2170 7 (5) @ 890MHz; 3 (1) @2100MHz Multiband

  0.7 COL2194 824-2170 6 (4) @ 890MHz; 3 (1) @2100MHz Multiband

  3.2 COL811-930 824-2170 5 (3) @ 890MHz; 3 (1) @2100MHz Multiband

  3.4 COL811-870 850-930 10 (8) Full band

  3.6 COL811-806 806-870 10 (8) Full band

  1.8 COL85-930 746-806 11 (9) Full band

  1.9 COL85-870 850-930 9 (7) Full band

  2.0 COL85-806 806-870 9 (7) Full band

  1.6 COL84-930 746-806 9 (7) Full band

  1.7 COL84-806 806-870 6 (4) Full band

  Frequency MHz Gain dBi (dBd) Bandwidth Length m Model

  1.1 COL81-930 746-806 7 (5) Full band

  1.1 COL81-870 850-930 2 (0) Full band

  1.1 COL81-806 806-870 2 (0) Full band

  4.9 COL410-72 746-806 2 (0) Full band

  5.2 COL410-71 490-520 10 (8) Full band

  5.4 COL410-70 470-490 10 (8) Full band

  5.9 COL410-65 450-470 10 (8) Full band

  6.2 COL410-58 400-420 10 (8) Full band

  380-400 10 (8) Full band

  1.7 COL2199

• Low wind and tower loading DC grounded for lightning protection and the reduction of precipitation static noise
• Models available in heavy duty construction with heavy duty black radome - aiding in ice shed
• Models available with stainless steel mounting sections for corrosive environments
• Frequency specific models available for both simplex and duplex applications

  3.1 Duplex operation COL8 380-530 8 (6)

  175-310 5 (3) 5.0%

  2.7 Duplex operation COL27 300-390 8 (6) 4.0%

  3.7 Duplex operation COL23 300-390 8 (6) 4.0%

  3.7 COL23 supplied with 1m RG213 Cable Tail with N (female) connector COL23-T1 380-530 5 (3) 4.0%

  2.2 Duplex operation COL7 390-520 5 (3) 4.0%

  2.2 Duplex operation - Ruggedised black radome for ice shedding COL11 380-530 8 (6)

  10MHz

  10MHz

  4.7 Duplex operation - Ruggedised black radome for ice shedding COL18 148-175 7 (5) 4.0%

  3.0 Duplex operation - Ruggedised black radome for ice shedding COL12 380-530 8 (6)

  10MHz

  3.0 Duplex operation - Ultra heavy duty black radome for ice shedding & galvanised mounting tube COL19

  600-1000 5 (3) 5% @ <800MHz 9% @ >800MHz

  1.5 Duplex operation - Stainless steel mounting tube COL903 600-1000 8 (6)

  5% @ <800MHz 9% @ >800MHz

  2.2 Duplex operation - Stainless steel mounting tube COL906

  COL8 Special Features 67-1000 MHz

  4.6 Duplex operation - Ultra heavy duty black radome for ice shedding & galvanised mounting tube COL36

  144-175 7 (5) 4.0%

  For complete, up to date product specifications on individual items please visit www.rfi.com.au

  5.9 Duplex operation - Ruggedised black radome for ice shedding COL1 67-88 5 (3) 3.0%

  Manufactured to Frequency Designs COL23 E Plane COL23 Typical VSWR Response

  ( ) ^{340 342 344 346 348 350 352 354 356 358 360} Operating Bandwidth

  Frequency MHz

  Gain dBi (dBd)

  Bandwidth Length m

  Description Model

  70-88 5 (3) 3.0%

  5.8 Duplex operation COL16 88-115 5 (3) 1.0%

  4.4 Duplex operation - Stainless steel mounting tube for corrosive environ- ments COL24

  4.8 Simplex operation (narrowband) COL22 115-148 5 (3) 4.0%

  3.8 Dulpex operation COL28 115-148 5 (3) 4.0%

  3.8 Duplex operation - Ruggedised black radome for ice shedding COL29 144-175 5 (3) 4.0%

  3.0 Duplex operation COL17 144-175 5 (3) 4.0%

  3.0 Duplex operation - Ruggedised black radome for ice shedding COL3 148-175 5 (3) 4.0%

  2.9 Duplex operation - Ultra heavy duty black radome for ice shedding & galvanised mounting tube COL35

  144-175 7 (5) 4.0%

  4.4 Duplex operation COL4 144-175 7 (5) 4.0%

  COL23

• Exceptional pattern stability across the entire band
• Industry leading low PIM characteristics -150dBc
• DC grounded for lightning protection and the reduction of precipitation static noise
• Lightweight dipole construction and low centre of gravity minimised tip deflection and
• Supplied pre-tuned in a vast range of bands
• Low wind and tower loading - ideal alternative to exposed dipole arrays
• Models available as dual antennas with separate feeds in one housing

  For complete, up to date product specifications on individual items please visit www.rfi.com.au

  380-870 MHz Low PIM Corporate Collinear Design

Special Features

  CC807-06 E Plane CC807-06 Typical VSWR Response ( ) 730 745 760 775 790 805 820 835 850 865 880

  Operating Bandwidth Frequency MHz Gain dBi (dBd) Bandwidth Length m Model

  380-420 7 (5) Full band

  3.1 CC380-06 380-420 Dual Band 4.6 (2.5) Full band

  3.8 CC380-33 450-520 7 (5) Full band

  2.7 CC450-06 746-870 5 (3) Full band

  1.3 CC807-03 746-870 8 (6) Full band

  1.8 CC807-06* 746-870 10 (8) Full band

  2.9 CC807-08* 746-870 13 (11) Full band

  5.3 CC807-11* *Available in tilt variations of 1, 3 & 5 degrees by adding, -T1, -T5. Can be mounted upright or invert.

  Yagi Antennas The RFI range of yagi antennas feature standard aluminium, ruggedised aluminium or stainless

steel construction to meet the needs of the most

demanding applications. Ideal for point to point, short or long link applications, RFI yagi antennas

feature all welded construction for years of reliable

service in a variety of environmental conditions.

  For complete, up to date product specifications on individual items please visit www.rfi.com.au Yagi Antennas 70-600 MHz

Special Features

• All welded construction for maximum • Available as custom tuned or full band operation performance and reliability • Can be configured in stacks or bays for higher
• High front to back ratio to reduce interference gain applications using PH and PHE phasing
• Models available in marine grade stainless steel harnesses for corrosive environments • An extensive range of phasing harnesses
• Fully folded dipole driven element construction available for maximum reliability
• Alodined finish provides an excellent conductive surface for earthing
_{Operating Bandwidth}

  440 445 450 455 460 465 470 475 480 485 490 _{( )} YB6-61 E Plane YB6-61 Typical VSWR Response

  

VHF Yagi Antennas

Frequency Gain dBi Bandwidth Vertical Horizontal BW F/B Ratio Description Model

  MHz (dBd) dB BW

  70-100 5 (3)

  6MHz 70 140 10 2 element Yagi with stainless steel fittings YL02 _~ 70-100 6 (4)

  3MHz 60 105 up to 20 2 element Yagi with stainless steel fittings YL02D 70-100 8 (6)

  5MHz

  60

  75 15 3 element Yagi with stainless steel fittings YL03 70-100 9 (7)

  4MHz

  55

  60 16 4 element Yagi with stainless steel fittings YL04 100-250 5 (3)

  12MHz 80 140 11 2 element Yagi with stainless steel fittings YH02 _~ 100-250 6 (4)

  6MHz 70 130 up to 20 2 element Yagi with stainless steel fittings YH02D 100-250 8 (6)

  9MHz

  60 75 15 (typ.) 3 element Yagi with stainless steel fittings YH03 100-250 9 (7)

  8MHz

  55 70 15 (typ.) 4 element Yagi with stainless steel fittings YH04 100-250 11 (9)

  8MHz

  52 50 15 (typ.) 6 element Yagi with stainless steel fittings YH06 100-250 12 (10)

  8MHz

  35 50 15 (typ.) 9 element Yagi with stainless steel fittings YH09

UHF Yagi Antennas

  300-600 5 (3) 5% 77 161 9 2 element Yagi - specify operating frequency YB02-99 350-600 8 (6) 5%

  63

  98 13 3 element Yagi - specify operating frequency YB03-99 400-600 11 (9) Full band

  47 56 18 (typ.) 6 element Yagi - refer below for available bands YB6*^ 350-600 11 (9) 5%

  47 56 18 (typ.) 6 element Yagi - specify operating frequency YB6-99 400-470 11 (9) Full band 45 49-52 16-18 7 element Yagi - refer below for available bands YB7* 400-470 13 (11) Full band

  36

  39 18 10 element Yagi - refer below for available bands YB10* 400-600 13 (11) Full band

  46 54 18 (typ.) 9 element Yagi - refer below for available bands YB9*^ 400-600 13 (11) 5%

  54 48 19 (typ.) 9 element Yagi - specify operating frequency YB9-99 400-600 14 (12) Full band

  34 36 20 (typ.) 16 element Yagi - refer below for available bands YB16*^ 400-600 14 (12) 5%

  34 36 21 (typ.) 16 element Yagi - specify operating frequency YB16-99

• Specify the following suffix when ordering: -61 (450-480MHz), -62 (480-520MHz), -63 (480-500MHz), -65 (400-420MHz), -70 (450-470MHz), -71 (470-490MHz), -75 (580-600MHz), eg: YB6-62 ^Available in stainless steel construction for corrosive environments. Specify YBSS as the prefix eg: YBSS6-62 ~ The front to back ratio is dependant on mounting arrangements. When correctly mounted as per the supplied instructions, 18-20dB front to back ratio is achieved.

  For complete, up to date product specifications on individual items please visit www.rfi.com.au

  300-600 MHz Ruggedised UHF Yagi Antennas

Special Features

• Heavy duty boom and elements black powder coated to aid in ice shedding
• High front to back ratio to reduce interference
• All welded construction for maximum performance and reliability
• Can be configured in stacks or bays for higher gain applications using PH and PHE phasing harnesses.
• Ruggedised construction for use in extreme conditions
• Available as custom tuned or full band operation
• An extensive range of phasing harnesses available

  For complete, up to date product specifications on individual items please visit www.rfi.com.au

  46 18 9 element heavy duty Yagi - refer below for available bands YL04

  RDA6-99 E Plane RDA6-99 Typical Response VSWR

  ( ) ^{480 484 488 492 496 500 504 508 512 516 520} Operating Bandwidth

  36 20 16 element heavy duty Yagi - specify operating frequency YH03

  35

  9MHz

  100-250 14 (12)

  36 20 16 element heavy duty Yagi - refer below for available bands YH02D ^

  35

  6MHz

  100-250 14 (12)

  46 18 9 element heavy duty Yagi - specify operating frequency YH02

  41

  12MHz

  100-250 13 (11)

  41

  Frequency MHz

  70-100 13 (11)

  54 20 9 element heavy duty Yagi - specify operating frequency RDA6-99

  45

  330-600 11 (9) 4%

  54 20 6 element heavy duty Yagi - refer below for available bands RDA6*

  45

  400-600 11 (9) Full band

  90 15 3 element heavy duty Yagi - specify operating frequency RDA3-99

  62

  300-600 8 (6) 4%

  Description Model

  Bandwidth Vertical BW Horizontal BW F/B Ratio dB

  Gain dBi (dBd)

  4MHz

• Specify the following suffix when ordering: -61 (450-480MHz), -62 (480-520MHz), -63 (480-500MHz), -65 (400-420MHz), -70 (450-470MHz),
• 71 (470-490MHz), -75 (580-600MHz), eg: RDA6-62 ^Available in stainless steel construction for corrosive environments.

• Alodined finish provides and excellent conductive surface for earthing
• All welded construction for maximum performance and reliability
• Fully folded dipole driven element construction for maximum reliabi
• Narrow beamwidths and high F/B ratio effective in reducing interference
• Models available in marine grade stainless steel for corrosive environments
• An extensive range of phasing harnesses available

  41 48 15-18 9 element Yagi - refer below for available bands YB809*^ 540-1000 12 (10) 5%

  ( ) 875 885 895 905 915 925 935 945 955 965 975 Operating Bandwidth

  24 Dual 18 element Yagi YBA818-82

  24

  14

  30 17 16 element Yagi - specify operating frequency YB815-99^ 850-930 19 (17) Full band

  30

  30 30 17-20 15 element Yagi - refer below for available bands YB815*^ 540-1000 14 (12) 5%

  48 16 9 element Yagi - specify operating frequency YB809-99^ 806-960 14 (12) Full band

  41

  61 17 6 element Yagi - specify operating frequency YB806-99^ 806-960 12 (10) Full band

  49

  49 61 17-22 6 element Yagi - refer below for available bands YB806*^ 540-1000 11 (9) 5%

  806-960 11 (9) Full band

  850-930 8 (6) Full band 64 100 14 3 element Yagi - refer below for available bands YB803-82^ 540-1000 8 (6) 5% 65 103 14 3 element Yagi - specify operating frequency YB803-99^

  Description Model

  Bandwidth Vertical BW Horizontal BW F/B Ratio dB

  Gain dBi (dBd)

  Frequency MHz

  Special Features 806-1000 MHz 800MHz Yagi Antennas

• Specify the following suffix when ordering: -81 (806-896MHz), -82 (850-930MHz), -94 (890-960MHz) eg: YB806-82 ^Available in stainless steel construction for corrosive environments. Specify YBS as the prefix eg: YBS806-82

  For complete, up to date product specifications on individual items please visit www.rfi.com.au

  YB806-94 E Plane YB806-94 Typical Response VSWR

Wireless Broadband Antennas

  For complete, up to date product specifications on individual items please visit www.rfi.com.au

  The RFI range of wireless broadband antennas includes both ground plane independent omni-directional and directional antenna designs. The range includes 2.4GHz,

  5.8GHz and a suite of multiband cellular antennas operating from 800-2500MHz that can be used in a variety of systems such as cellular coverage enhancement for in-building applications, M2M, LAN extensions Wireless Broadband Antennas Collinear Antennas 2400-5850 MHz

  Special Features

• Patented Meander™ PCB antenna design for the • Small unobtrusive form factor

  ultimate in pattern stability • UV stable white housing - ideal for both indoor

• Ground plane independent design and outdoor applications including marine
• Rugged construction - suitable for corrosive • Models available with spring base for mobile environments applications

  Operating Bandwidth 2.40 2.41 2.42 2.43 2.44 2.45 2.46 2.47 2.48 2.49 2.50

  ( ) G COL2408 E Plane COL2408 Typical VSWR Response

  CD2405 Frequency MHz Gain dBi (dBd) Description Model

  2400-2500 5 (3) Stud mount with N-female on 300mm tail COL2402 2400-2500 6.6 (4.5) Integrated N-male connector CD2405 2400-2500 8 (6) Stud mount with N-female on 300mm tail COL2406 2400-2500 10 (8) Stud mount with N-female on 300mm tail COL2408 2400-2500 10.6 (8.5) Integrated N-male connector CD2409 2400-2500 12 (10) Stainless steel mounting tube & N-female on 300mm tail COL2410 5725-5820 8 (6) Stud mount with N-female on 300mm tail COL5806 5725-5820 12 (10) Stud mount with N-female on 300mm tail COL5810

  For complete, up to date product specifications on individual items please visit www.rfi.com.au Multiband Antennas 800-2500 MHz

  Special Features

• • Supports multiple networks in the one housing • Models available with high impact resistance

• Models available with IP65 construction - suitable housings to prevent vandal damage

  for indoor and outdoor applications • Discrete designs suitable for modern office

• Suitable for use on metallic and non-metallic environments surfaces

  Frequency MHz Gain dBi (dBd) Description Model

  800-900, 1710-2200, 3.7 (1.6), 4 (2), Ceiling mount with N-female DAS-M1

  2400-2500 5.4 (3.3) 800-960, 1710-2500 4 (2), 5 (3) Ceiling stud mount with N-female DAS-M4

  824-960, 1710-2170, 3.9 (1.8), 4 (2), Stud mount with SMA-male on CSM900

  2400-2500 5.6 (3.5) 1.25m tail Panel antenna with pole and wall

  824-960, 1710-2500 9 (7), 12 (10) CPL824-2500-10SMA mount

  For complete, up to date product specifications on individual items please visit www.rfi.com.au Notes

The pulp for this paper is sourced from certified, well managed sustainable forests and is ECF (Elemental Chlorine Free).

  The mill is ISO 14001 accredited. It has been "Made Carbon Neutral" by CPI Paper rfi.com.au