Agus Sabar Sabdono 21100112130051 2017 DAFTAR PUSTAKA
DAFTAR PUSTAKA
Australian Standart. 2005. Technical Memorandum for Geothecnical Mapping:
Quensland.
Azizi, M.A. 2012. Analisis Resiko Kestabilan Lereng Tambang Terbuka (Studi
Kasus Tambang Mineral X). Prosiding Simposium dan Seminar
Geomekanika ke-1: Jakarta.
Azizi, M.A. 2014. Pengembangan Metode Reliabilitas Penentuan Kestabilan
Lereng Tambang Terbuka Batubara di Indonesia. Disertasi (tidak
dipublikasikan). Jurusan Rekayasa Teknik Pertambangan Institut Teknologi
Bandung: Bandung.
Bachtiar Andang. 2008. Geologi Pulau Kalimantan. Bandung. ITB. Slide PPT
Bieniawski, Z.T. 1989. Engineering rock mass classification. John Wiley
Interscience: New York.
Bowles, J.E. 1984. Physical and Geotechnical Properties of Soil: Second Edition.
McGraw-Hill: New York, USA.
Brady, B.H.G and Brown, E.T. 2004. Rock Mechanics for Underground Mining
Third Edition. Kluwer Academic Publishers: Boston, USA.
Deere, D.U. 1963. Technical Description of Rock Cores for Engineering
Purposes. Felsmechanik und Ingenieurgeologie (Rock Mechanics and
Engineering Geology), 1(1). 16-22.
Fossen Haakson. 2010. Structural Geology. New York. Cambridge University
Press.
Hoek, E and Brown, E.T. 1980. Empirical Strength Criterion for Rock Masses.
Journal of the Geotechnical Engineering Division: Proceedings of American
Society of Civil Engineers, Vol. 106.
Hoek, E and Brown, E.T. 1997. Technical Note Practical Estimates of Rock Mass
Strength. Elsevier: International Journal Rock Mechanics and Mining
Sciences Vol 34, No 8 pages 1165-1186.
Hoek, E and Bray, J.W. 1981. Rock Slope Engineering. The Institution of Mining
and Metallurgy. 3rd edition : London.
Hoek, E and Karzulovic, A. 2000. Rock Mass Properties for Surface Mines. Slope
106
Hoek, E and Marinos, P. 2000. GSI: Geologically Friendly Tool for Rock Mass
Strength Estimation. Proceeding of the International Conference
Geotechnical and Geological Engineering: Melbourne.
Hoek, E., Read, J., Karzulovic, A., Chen, Z.Y. 2000. Rock Slopes for Civil and
Mining Engineering. Proceeding of the International Conference
Geotechnical and Geological Engineering: Melbourne.
Hoek,E., Torres, C.C., Corkum, B. 2002. Hoek Brown Criteria Failure Criteria
2002. NARMS-TAC Conference: Toronto.
Hoek, E., Carter, T.G., Diedrichs, M.S. 2013. Quantification of Geological
Strength Index Chart. Proceedings of 47th Geomechanic Symposium: San
Fransisco.
Lisle Richard J. 2004. Geological Structures and Map : A Practical Guide.
Oxford,UK. Cardiff University.
Nichols Gary. 2009. Sedimentology Stratigraphy. United Kingdom. WilleyBlackwell.
Ragan Donald D. 2009. Structural Geology An Introduction to Geometrical
Techniques. New York. Cambridge University Press.
Reineck Singh. 1980. Depositional Sedimentary Environments. New York.
Departement of Geology. Lucknow University India.
Stability in Surface Mining Conference: Society for Mining, Metallurgical and
Exploration 2000 p 59-70
Sukamto. 1996.Peta Geologi Indonesia. Skala 1:5000000. Puslitbang Sumber
Daya Geologi: Bandung.
Sukardi.1995. Peta Geologi Lembar Muaralasan, Kalimantan Skala 1:250000.
Puslitbang Sumber Daya Geologi: Jakarta.
Suwana, G.W. Desain Lereng Final Dengan Metode RMR, SMR, dan Analisis
Kestabilan Lereng pada Tambang Terbuka. Kabupaten Tanah Laut,
Kalimantan Selatan. Buletin Sumber Daya Geologi Volume 7 Nomor 2:
Bandung.
Wesley Laurence D. 2010. Fundamentals of Soil Mechanics for Sedimentary and
Residual Soils. New Jersey. John Willey & Sons,inc.
Zakaria Zulfiadi. Analisis Kestabilan Lereng. Jurusan Teknik Geologi Universitas
Padjajaran: Bandung.
107
Australian Standart. 2005. Technical Memorandum for Geothecnical Mapping:
Quensland.
Azizi, M.A. 2012. Analisis Resiko Kestabilan Lereng Tambang Terbuka (Studi
Kasus Tambang Mineral X). Prosiding Simposium dan Seminar
Geomekanika ke-1: Jakarta.
Azizi, M.A. 2014. Pengembangan Metode Reliabilitas Penentuan Kestabilan
Lereng Tambang Terbuka Batubara di Indonesia. Disertasi (tidak
dipublikasikan). Jurusan Rekayasa Teknik Pertambangan Institut Teknologi
Bandung: Bandung.
Bachtiar Andang. 2008. Geologi Pulau Kalimantan. Bandung. ITB. Slide PPT
Bieniawski, Z.T. 1989. Engineering rock mass classification. John Wiley
Interscience: New York.
Bowles, J.E. 1984. Physical and Geotechnical Properties of Soil: Second Edition.
McGraw-Hill: New York, USA.
Brady, B.H.G and Brown, E.T. 2004. Rock Mechanics for Underground Mining
Third Edition. Kluwer Academic Publishers: Boston, USA.
Deere, D.U. 1963. Technical Description of Rock Cores for Engineering
Purposes. Felsmechanik und Ingenieurgeologie (Rock Mechanics and
Engineering Geology), 1(1). 16-22.
Fossen Haakson. 2010. Structural Geology. New York. Cambridge University
Press.
Hoek, E and Brown, E.T. 1980. Empirical Strength Criterion for Rock Masses.
Journal of the Geotechnical Engineering Division: Proceedings of American
Society of Civil Engineers, Vol. 106.
Hoek, E and Brown, E.T. 1997. Technical Note Practical Estimates of Rock Mass
Strength. Elsevier: International Journal Rock Mechanics and Mining
Sciences Vol 34, No 8 pages 1165-1186.
Hoek, E and Bray, J.W. 1981. Rock Slope Engineering. The Institution of Mining
and Metallurgy. 3rd edition : London.
Hoek, E and Karzulovic, A. 2000. Rock Mass Properties for Surface Mines. Slope
106
Hoek, E and Marinos, P. 2000. GSI: Geologically Friendly Tool for Rock Mass
Strength Estimation. Proceeding of the International Conference
Geotechnical and Geological Engineering: Melbourne.
Hoek, E., Read, J., Karzulovic, A., Chen, Z.Y. 2000. Rock Slopes for Civil and
Mining Engineering. Proceeding of the International Conference
Geotechnical and Geological Engineering: Melbourne.
Hoek,E., Torres, C.C., Corkum, B. 2002. Hoek Brown Criteria Failure Criteria
2002. NARMS-TAC Conference: Toronto.
Hoek, E., Carter, T.G., Diedrichs, M.S. 2013. Quantification of Geological
Strength Index Chart. Proceedings of 47th Geomechanic Symposium: San
Fransisco.
Lisle Richard J. 2004. Geological Structures and Map : A Practical Guide.
Oxford,UK. Cardiff University.
Nichols Gary. 2009. Sedimentology Stratigraphy. United Kingdom. WilleyBlackwell.
Ragan Donald D. 2009. Structural Geology An Introduction to Geometrical
Techniques. New York. Cambridge University Press.
Reineck Singh. 1980. Depositional Sedimentary Environments. New York.
Departement of Geology. Lucknow University India.
Stability in Surface Mining Conference: Society for Mining, Metallurgical and
Exploration 2000 p 59-70
Sukamto. 1996.Peta Geologi Indonesia. Skala 1:5000000. Puslitbang Sumber
Daya Geologi: Bandung.
Sukardi.1995. Peta Geologi Lembar Muaralasan, Kalimantan Skala 1:250000.
Puslitbang Sumber Daya Geologi: Jakarta.
Suwana, G.W. Desain Lereng Final Dengan Metode RMR, SMR, dan Analisis
Kestabilan Lereng pada Tambang Terbuka. Kabupaten Tanah Laut,
Kalimantan Selatan. Buletin Sumber Daya Geologi Volume 7 Nomor 2:
Bandung.
Wesley Laurence D. 2010. Fundamentals of Soil Mechanics for Sedimentary and
Residual Soils. New Jersey. John Willey & Sons,inc.
Zakaria Zulfiadi. Analisis Kestabilan Lereng. Jurusan Teknik Geologi Universitas
Padjajaran: Bandung.
107