Pembuatan Material Anoda Lithium Titanate (Li4Ti5O12) dan Studi Pengaruh Ketebalan Elektroda Terhadap Performa Elektrokimia Baterai Ion Lithium
DAFTAR PUSTAKA
.
Chang, Horng-Yie. 1998. Effects of Rapid on the Conductivity of Multiple Doped
Ceria-Based Electrolyte. Journal of Power Sources. 196: 1704-1711.
Chew, S.Y., et all. 2008. Thin Nanostuctured LiMn2O4 Film by Flame Spray
Deposition an In Situ Annealing Method. Journal of Power Sources.
Vol.189.
hal. 449 – 453.
Courtel, Fabrice M et al. 2011. Water Soluble Binders for MCMB Carbon Anodes
fot Lithium Ion Batteries. Journal of Power Source.196 : 2128-2134.
Cullity, B.D. 1972. Introduction to Magnetic Material. Addison - Wesley,
Publishing Company, Inc. USA.
C. Zhang, Y. Zhang, J. Wang, D. Wang, D. He, and Y. Zia. “Li 4Ti5O12 prepared
by a modified citric acid sol-gel method for lithium-ion battery”. Journal
of Power Sources, vol. 236, pp. 118-125.
Guo-Rong, ZHANG Xin-long, PENG Zhong-dong. 2011. Preparation and
electrochemical performance of tantalum-doped lithium titanate as anode
material for lithium-ion battery. , China. School of Metallurgical Science
and Engineering, Central South University, Changsha 410083.
Herstedt, M. 2003. Towards Safer Lithium-Ion Batteries. Departement of
Materials.
http://files.tested.com/upload/0/5/16904-lithium-ion-separator.gif, diakses tanggal
16 Maret 2016.
Lawrence H. Van Vlack. 1992. Ilmu dan Teknologi bahan, Erlangga, edisi 5
Linden, David. 2002. Handbook of Batteries. McGraw-Hill vol 1. New York.
Nordh, Tim. 2013. Li4Ti5O12 as an anode material for Li ion batteries in situ XRD
and XPS studies. [Thesis]. Uppsala Universitet. Upteck k 13001.
Notter, D.A. Gauch, M. Widmer, R. 2010. Environ Sci Technol. 44 : 6550.
Scrosati, B. and Garche, J. 2010. Lithium batteries: Status, prospects and future. J.
Power Sources. 195: 2419–2430.
Simon, D.R. 2007. Characterization of Li4Ti5O12 and LiMn2O4 spinel materials
treated with aqueous acidic solutions. University of Cincinnati
Netherlands.
Universitas Sumatera Utara
Subhan, Achmad. 2011. Fabrikasi dan Karakterisasi Li4Ti5O12 Untuk Bahan
Anoda Baterai Lithium Keramik. [Thesis]. Depok : Universitas Indonesia.
Suci, P.S. 2015. Pengaruh Komposisi Lembaran Anoda LTO (Li4Ti5O12)
Terhadap Performa Sel Baterai Ion Lithium. [Skripsi]. Medan :
Universitas Sumatera Utara.
Tarascon J-M, Armand M. 2001. Issues and Challenges Facing Rechargeable
Lithium Batteries. 414: 359-67.
Triwibowo, Joko. 2011. Rekayasa Bahan LixTMnxFez (PO4)3 sebagai Katoda
Solid Polymer Battery (SPB) Lithium. [Tesis]. Universitas Indonesia:
Depok.
Wakihara, M. 2001. Material Science and Engineering. R33:109.
Wang, J. 2000. Analytical Electrochemistry. Chapter 2. John Wiley & Sons.
Wen, R. 2012. Nanostructured Li4Ti5O12 as Anode Material for Lithium Ion
Batteries. [Thesis]. University of New South Wales.
Winter, M and Ralph, J. Brodd. 2004. What Are Batteries, Fuel Cells, and
Supercapacitors?. Washington. 104 μ 4β45−4β6λ.
Xiangcheng Sun, Manu Hegde, Yuefei Zhang, Min He, Lin Gu, Yongqing Wang,
Jie Shu, Pavle V. Radovanovic, and Bo Cui. 2014. Structure and
Electrochemical Properties of Spinel Li4Ti5O12 Nanocomposites as
Anode for Lithium-Ion Battery. Int. J. Electrochem. Sci.9: 1583 – 1596.
Yao, Yupeng. 2003. Carbon Based Anode Materials Lithium Ion Batteries.
[Thesis]. University of Wollongong: Institute For Superconducting &
Electronic Materials, Faculty of Engineering.
Yurong Ren, Peng Lu, Xiaobing Huang, Shibiao Zhou, Yuandao Chen, Beiping
Liu, Fuqiang Chu, Jianning Ding. 2015. In-situ synthesis of nanoLi4Ti5O12/C composite as an anode material for Li-ion batteries. Solid
State Ionics 274 (2015) 83–87
Zhao, xin et al. 2011. In Plane Vacancy Enabled High Power Si Graphene
Composite Electrode For Lithium Ion Batteries. Journal of advanced
energy materials.
Universitas Sumatera Utara
.
Chang, Horng-Yie. 1998. Effects of Rapid on the Conductivity of Multiple Doped
Ceria-Based Electrolyte. Journal of Power Sources. 196: 1704-1711.
Chew, S.Y., et all. 2008. Thin Nanostuctured LiMn2O4 Film by Flame Spray
Deposition an In Situ Annealing Method. Journal of Power Sources.
Vol.189.
hal. 449 – 453.
Courtel, Fabrice M et al. 2011. Water Soluble Binders for MCMB Carbon Anodes
fot Lithium Ion Batteries. Journal of Power Source.196 : 2128-2134.
Cullity, B.D. 1972. Introduction to Magnetic Material. Addison - Wesley,
Publishing Company, Inc. USA.
C. Zhang, Y. Zhang, J. Wang, D. Wang, D. He, and Y. Zia. “Li 4Ti5O12 prepared
by a modified citric acid sol-gel method for lithium-ion battery”. Journal
of Power Sources, vol. 236, pp. 118-125.
Guo-Rong, ZHANG Xin-long, PENG Zhong-dong. 2011. Preparation and
electrochemical performance of tantalum-doped lithium titanate as anode
material for lithium-ion battery. , China. School of Metallurgical Science
and Engineering, Central South University, Changsha 410083.
Herstedt, M. 2003. Towards Safer Lithium-Ion Batteries. Departement of
Materials.
http://files.tested.com/upload/0/5/16904-lithium-ion-separator.gif, diakses tanggal
16 Maret 2016.
Lawrence H. Van Vlack. 1992. Ilmu dan Teknologi bahan, Erlangga, edisi 5
Linden, David. 2002. Handbook of Batteries. McGraw-Hill vol 1. New York.
Nordh, Tim. 2013. Li4Ti5O12 as an anode material for Li ion batteries in situ XRD
and XPS studies. [Thesis]. Uppsala Universitet. Upteck k 13001.
Notter, D.A. Gauch, M. Widmer, R. 2010. Environ Sci Technol. 44 : 6550.
Scrosati, B. and Garche, J. 2010. Lithium batteries: Status, prospects and future. J.
Power Sources. 195: 2419–2430.
Simon, D.R. 2007. Characterization of Li4Ti5O12 and LiMn2O4 spinel materials
treated with aqueous acidic solutions. University of Cincinnati
Netherlands.
Universitas Sumatera Utara
Subhan, Achmad. 2011. Fabrikasi dan Karakterisasi Li4Ti5O12 Untuk Bahan
Anoda Baterai Lithium Keramik. [Thesis]. Depok : Universitas Indonesia.
Suci, P.S. 2015. Pengaruh Komposisi Lembaran Anoda LTO (Li4Ti5O12)
Terhadap Performa Sel Baterai Ion Lithium. [Skripsi]. Medan :
Universitas Sumatera Utara.
Tarascon J-M, Armand M. 2001. Issues and Challenges Facing Rechargeable
Lithium Batteries. 414: 359-67.
Triwibowo, Joko. 2011. Rekayasa Bahan LixTMnxFez (PO4)3 sebagai Katoda
Solid Polymer Battery (SPB) Lithium. [Tesis]. Universitas Indonesia:
Depok.
Wakihara, M. 2001. Material Science and Engineering. R33:109.
Wang, J. 2000. Analytical Electrochemistry. Chapter 2. John Wiley & Sons.
Wen, R. 2012. Nanostructured Li4Ti5O12 as Anode Material for Lithium Ion
Batteries. [Thesis]. University of New South Wales.
Winter, M and Ralph, J. Brodd. 2004. What Are Batteries, Fuel Cells, and
Supercapacitors?. Washington. 104 μ 4β45−4β6λ.
Xiangcheng Sun, Manu Hegde, Yuefei Zhang, Min He, Lin Gu, Yongqing Wang,
Jie Shu, Pavle V. Radovanovic, and Bo Cui. 2014. Structure and
Electrochemical Properties of Spinel Li4Ti5O12 Nanocomposites as
Anode for Lithium-Ion Battery. Int. J. Electrochem. Sci.9: 1583 – 1596.
Yao, Yupeng. 2003. Carbon Based Anode Materials Lithium Ion Batteries.
[Thesis]. University of Wollongong: Institute For Superconducting &
Electronic Materials, Faculty of Engineering.
Yurong Ren, Peng Lu, Xiaobing Huang, Shibiao Zhou, Yuandao Chen, Beiping
Liu, Fuqiang Chu, Jianning Ding. 2015. In-situ synthesis of nanoLi4Ti5O12/C composite as an anode material for Li-ion batteries. Solid
State Ionics 274 (2015) 83–87
Zhao, xin et al. 2011. In Plane Vacancy Enabled High Power Si Graphene
Composite Electrode For Lithium Ion Batteries. Journal of advanced
energy materials.
Universitas Sumatera Utara