Pengaruh Pelapisan Karbon pada Bahan Aktif Anoda Na2Li2Ti6O14
DAFTAR PUSTAKA
A.K. Padhi, K.S. Nanjundaswamy, J.B. Goodenough,. 1997. Phospho-olivines as
Positive-Electrode Materials for Rechargeable Lithium Batteries , J.
Electrochem. Soc. 144: 1188-1194
Amstead, B.H., Djaprie, S. 1995. Teknologi Mekanik Edisi ke-7 Jilid I. Jakarta:
Erlangga.
A, Pasquier, C.C. Huang, T. Spitler. 2009. Journal of Power . Sources.189,508.
Armand, M. and J.M. Tarascon. 2008. Building better batteries. Nature. 451: 652657.
Chen, Y., Miao, Q., Zheng, B., Wu, S. and Pecht, M. 2013. Quantitative analysis
of lithium ion battery capacity prediction via adaptive bathtub-shaped
function. Energies. 6: 3082–3096.
Christensen, J., Srinivasan, V. & Newman, J. 2006.Optimization Of Lithium
Titanate Electrodes For High-Power Cell. J. Electrochem.Soc . 153. A560.
Croce, F., Appetecchi, G. B., Persi, L. & Scrosati, B. 1998 Nanocomposite
polymer electrolytes for lithium batteries. Nature 394, 456–458.
(doi:10.1038/28818)
D. Leiden.2002. Hanbook of Batteries, McGraw-Hill. Deutsche Bank. 2009.
Autos & auto parts Electric Cars : Plugged in 2. From http://www.db.com
F. Ronci, P.Reale, B, Scrosati, S. Panero, P. A. Moro, V. R. Albertini, P. Perfetti,
T.
Vergatha,
V.J.
Horowitz,
2002.
The
Journal
Of
Physical
Chemistry,106-3082
Ferg, E.1994. Spinel Anodes For Lithium-Ion Batteries. J. Electrochem.
Soc.141,L147..
Hu, X., Sun, F., and Zou, Y. 2010. Estimation of state of charge of a lithium-ion
battery pack for electric vehicles using an adaptive Luenberger observer .
Energies. 3: 1586–1603.
Universitas Sumatera Utara
Jang, D. H., Shin, Y. J. & Oh, S. M. 1996. Dissolution of Spinel Oxides and
Capacity Losses in 4 V LiLi xMn2O4 Cells. J. Electrochem. Soc. 143, 2204.
Kang
Suk-Joong L, 2005, Sintering
Microstructure ),Elseveir.
(Desification,
graingrowth,
and
K.D. Shyamal, A.J. Bhattacharyya,J,2009. Phys. Chem.133, 17367-17371
Kitta, M., Akita, T., Maeda, Y. & Kohyama, M. 2012. Study of surface reaction of
spinel Li4Ti5O12 during the first lithium insertion and extraction process
using atomic force microscopy and analytical transmission electron
microscopy. Langmuir 28, 12384-92.
K.Kang, Y.S. Meng, J. Breger, C.P. Grey,G. Ceder. 2006. Electrodes with high
power and high capacity for rechargeable lithium batteries .Science:
311,977.
Kucinskis, G., Bajars, G., and Kleperis, J. 2013. Graphene in lithium ion battery
cathode materials: A review. Journal of Power Sources, 240, pp. 66-79.
K. Wu, J, Yang, Y, Zhang, C, Wang, D, Wang. 2012. Jounal Of Applied
Electrochemistry.
Lu, L., Han, X., Li, J., Hua, J. and Ouyang, M. 2013. A review on the key issues
for lithium-ion battery management in electric vehicles . J. Power Sources.
226 : 272–288Xu, K. 2004. Nonaqueous liquid electrolytes for lithium
based rechargeable batteries. Chemical Reviews. 104: 4303.
Maekawa, M., Matsuo, H., Takamura, M., Ando, Y., Noda, T., Karashiand, S.-I.&
Orimo J. 2009.Halide-stabilized LiBH4, a room-temperature lithium fastion conductor . Am. Chem. Soc. 131, 894–895.
Meti. 2009b. Patent Trend Report, Lithium Ion Battery. Retrieved June
7,2010.Fromhttp://www.jpo.go.jp/shiryou/pdf/gidouhoukoku/21lithium_io
n_battery.pdf
Minami, T., Hayashi, A. & Tatsumisago, M. 2007 Preparation of a-Fe2O3
electrode materials via solution process and their electrochemical
properties in all-solid-state lithium batteries . J. Electrochem. Soc . 154,
A725–A729. (doi:10.1149/1.2737349) (doi:10.1021/ja807392k)
Universitas Sumatera Utara
Nordh, Tim. 2013. Li4Ti5O12 as an anode material for Li ion batteries in situ
XRD and XPS studies. Uppsala Universitet . Upteck k 13001.
Palacín, M.R. 2009. Recent advances in rechargeable battery materials:
achemist’s perspective – chemical. Chemical Society Reviews. 38
(9):2565, 38, 2526-75
Riyanto, 2013. Elektrokimia dan Aplikasinya . Graha Ilmu, Yogyakarta.
Song, M.-S. et al.2014. Is Li4Ti5O12 a solid-electrolyte-interphase-free electrode
material in Li-ion batteries?Reactivity betweet the Li 4Ti5O12 electrode and
electrolyte. J. Mater. Chem. A 2, 631.
Subhan, A. 2011. Fabrikasi dan karakterisasi Li4Ti5O12 untuk bahan anoda
baterai lithium keramik. Tesis. Universitas Indonesia: Jakarta.
Tarascon, J.-M., Recham, N., Armand, M., Chotard, J. N., Barpanda, P., Walker,
W. & Dupont, L. 2010 Searching for better Li-based electrode materials
via
innovative low temperature inorganic syntheses & Issues and
challenges facing rechargeable lithium batteries . Chem. Mater/Nature. 22,
724–739.414, 359-367 (2001)
Verma, P., Maire, P. & Novak, P. 2010. A review of the features and analyses of
the solid electrolyte interphase in Li-ion batteries.Electrochim. Acta
55,6332-6341.
Vetter,J et al. 2005. Aging mechanisms in lithium-ion batteries. J.Power Sources
147, 269-281.
Whittingham, M.S. 1976. Electrical Energy Storage and Intercalation Chemistry.
Science. Vol. 192. No. 4244. pp. 1126 –1127.
Winter, M. and Brodd R.J. 2004. What are batteries: status, prospect and future .
Chemical Reviews. 104: 4245.
Wise, Ralph. 2010.
Chief Technology
Officer
at
Novolyte.
Personal
communication with CGGC research staff.
Universitas Sumatera Utara
A.K. Padhi, K.S. Nanjundaswamy, J.B. Goodenough,. 1997. Phospho-olivines as
Positive-Electrode Materials for Rechargeable Lithium Batteries , J.
Electrochem. Soc. 144: 1188-1194
Amstead, B.H., Djaprie, S. 1995. Teknologi Mekanik Edisi ke-7 Jilid I. Jakarta:
Erlangga.
A, Pasquier, C.C. Huang, T. Spitler. 2009. Journal of Power . Sources.189,508.
Armand, M. and J.M. Tarascon. 2008. Building better batteries. Nature. 451: 652657.
Chen, Y., Miao, Q., Zheng, B., Wu, S. and Pecht, M. 2013. Quantitative analysis
of lithium ion battery capacity prediction via adaptive bathtub-shaped
function. Energies. 6: 3082–3096.
Christensen, J., Srinivasan, V. & Newman, J. 2006.Optimization Of Lithium
Titanate Electrodes For High-Power Cell. J. Electrochem.Soc . 153. A560.
Croce, F., Appetecchi, G. B., Persi, L. & Scrosati, B. 1998 Nanocomposite
polymer electrolytes for lithium batteries. Nature 394, 456–458.
(doi:10.1038/28818)
D. Leiden.2002. Hanbook of Batteries, McGraw-Hill. Deutsche Bank. 2009.
Autos & auto parts Electric Cars : Plugged in 2. From http://www.db.com
F. Ronci, P.Reale, B, Scrosati, S. Panero, P. A. Moro, V. R. Albertini, P. Perfetti,
T.
Vergatha,
V.J.
Horowitz,
2002.
The
Journal
Of
Physical
Chemistry,106-3082
Ferg, E.1994. Spinel Anodes For Lithium-Ion Batteries. J. Electrochem.
Soc.141,L147..
Hu, X., Sun, F., and Zou, Y. 2010. Estimation of state of charge of a lithium-ion
battery pack for electric vehicles using an adaptive Luenberger observer .
Energies. 3: 1586–1603.
Universitas Sumatera Utara
Jang, D. H., Shin, Y. J. & Oh, S. M. 1996. Dissolution of Spinel Oxides and
Capacity Losses in 4 V LiLi xMn2O4 Cells. J. Electrochem. Soc. 143, 2204.
Kang
Suk-Joong L, 2005, Sintering
Microstructure ),Elseveir.
(Desification,
graingrowth,
and
K.D. Shyamal, A.J. Bhattacharyya,J,2009. Phys. Chem.133, 17367-17371
Kitta, M., Akita, T., Maeda, Y. & Kohyama, M. 2012. Study of surface reaction of
spinel Li4Ti5O12 during the first lithium insertion and extraction process
using atomic force microscopy and analytical transmission electron
microscopy. Langmuir 28, 12384-92.
K.Kang, Y.S. Meng, J. Breger, C.P. Grey,G. Ceder. 2006. Electrodes with high
power and high capacity for rechargeable lithium batteries .Science:
311,977.
Kucinskis, G., Bajars, G., and Kleperis, J. 2013. Graphene in lithium ion battery
cathode materials: A review. Journal of Power Sources, 240, pp. 66-79.
K. Wu, J, Yang, Y, Zhang, C, Wang, D, Wang. 2012. Jounal Of Applied
Electrochemistry.
Lu, L., Han, X., Li, J., Hua, J. and Ouyang, M. 2013. A review on the key issues
for lithium-ion battery management in electric vehicles . J. Power Sources.
226 : 272–288Xu, K. 2004. Nonaqueous liquid electrolytes for lithium
based rechargeable batteries. Chemical Reviews. 104: 4303.
Maekawa, M., Matsuo, H., Takamura, M., Ando, Y., Noda, T., Karashiand, S.-I.&
Orimo J. 2009.Halide-stabilized LiBH4, a room-temperature lithium fastion conductor . Am. Chem. Soc. 131, 894–895.
Meti. 2009b. Patent Trend Report, Lithium Ion Battery. Retrieved June
7,2010.Fromhttp://www.jpo.go.jp/shiryou/pdf/gidouhoukoku/21lithium_io
n_battery.pdf
Minami, T., Hayashi, A. & Tatsumisago, M. 2007 Preparation of a-Fe2O3
electrode materials via solution process and their electrochemical
properties in all-solid-state lithium batteries . J. Electrochem. Soc . 154,
A725–A729. (doi:10.1149/1.2737349) (doi:10.1021/ja807392k)
Universitas Sumatera Utara
Nordh, Tim. 2013. Li4Ti5O12 as an anode material for Li ion batteries in situ
XRD and XPS studies. Uppsala Universitet . Upteck k 13001.
Palacín, M.R. 2009. Recent advances in rechargeable battery materials:
achemist’s perspective – chemical. Chemical Society Reviews. 38
(9):2565, 38, 2526-75
Riyanto, 2013. Elektrokimia dan Aplikasinya . Graha Ilmu, Yogyakarta.
Song, M.-S. et al.2014. Is Li4Ti5O12 a solid-electrolyte-interphase-free electrode
material in Li-ion batteries?Reactivity betweet the Li 4Ti5O12 electrode and
electrolyte. J. Mater. Chem. A 2, 631.
Subhan, A. 2011. Fabrikasi dan karakterisasi Li4Ti5O12 untuk bahan anoda
baterai lithium keramik. Tesis. Universitas Indonesia: Jakarta.
Tarascon, J.-M., Recham, N., Armand, M., Chotard, J. N., Barpanda, P., Walker,
W. & Dupont, L. 2010 Searching for better Li-based electrode materials
via
innovative low temperature inorganic syntheses & Issues and
challenges facing rechargeable lithium batteries . Chem. Mater/Nature. 22,
724–739.414, 359-367 (2001)
Verma, P., Maire, P. & Novak, P. 2010. A review of the features and analyses of
the solid electrolyte interphase in Li-ion batteries.Electrochim. Acta
55,6332-6341.
Vetter,J et al. 2005. Aging mechanisms in lithium-ion batteries. J.Power Sources
147, 269-281.
Whittingham, M.S. 1976. Electrical Energy Storage and Intercalation Chemistry.
Science. Vol. 192. No. 4244. pp. 1126 –1127.
Winter, M. and Brodd R.J. 2004. What are batteries: status, prospect and future .
Chemical Reviews. 104: 4245.
Wise, Ralph. 2010.
Chief Technology
Officer
at
Novolyte.
Personal
communication with CGGC research staff.
Universitas Sumatera Utara