Analisa Respon Mekanik Model Bumper Beam Mobil Bahan Polymeric Foam Diperkuat Serbuk Tkks Dengan Variasi Konsentrasi Al2o3 Akibat Beban Impak Jatuh Bebas
DAFTAR PUSTAKA
[1]
Departemen Pertanian RI. 2006. Pedoman Pengelolaan Limbah Industri
Kelapa Sawit. Jakarta
[2]
Magda G. El-Meligy, Zenat A. Nagieb, and K. B. Isis, Effect of Variation
Aluminium Oxide Concentration on the Modified Novolac Stalk
Composite, ISRN Chemical Engineering, vol. 2012, Article ID
263975, 7 Pages, 2012.
[3]
Wikipedia, Material komposit, (online),
http://id.wikipedia.org/wiki/Material_Komposit, diakses tanggal
20 Agustus 2016, pukul 11:50 WIB
[4]
L.H
Sperling,
1997.
Polymeric
Multicomponent
Material:
An
Introduction, New York: Wiley
[5]
Khurmi R.S. AN ISO 9001 : 2000 Company., A Text Book of Mechanical
Engineering, S. Chand & Company Ltd., Ram
Delhi
[6]
Nagar, New
110055.
NTHSA, Bumper Q & A s (online)
http://www.nhtsa.gov/cars/problems/studies/Bumper/Index.html,
diakses tanggal 19 Agustus 2016, pukul 09:15 WIB
[7]
Sapuan S, Maleque M, Hameedullah M, Suddin M, Ismail N. A note on
the conceptual design of polymeric composite automotive bumper
system. J Mater Process Technol 2005;159:145 51.
[8]
Davoodi MM, Sapuan SM, Yunus R. Conceptual design of a polymer
composite automotive bumper energy absorber. J Mater Des
2008;29:1447 52.
[9]
AISI. Steel bumper systems for passenger cars and light trucks. South eld:
American Iron and Steel Institute; 2006.
[10]
National Highway Traf c Safety Administration (NHTSA). Laboratory
test procedure for regulation Part 581 bumper standard safety
assurance; 1990.
52
Universitas Sumatera Utara
[11]
La Heist, Warren G and Ephraim, Frank G. An Evaluation of the Bumper
Standard - As Modified in 1982. NTHSA Report Number DOT
HS 807 072
[12]
Hashim, J., 2003. Pemrosesan Bahan, Edisi pertama, Johor Bahru: Cetak
Ratu Sdn. Bhd.
[13]
Sivertsen, K., Polymeric Foam., (online)
http://ocw.mit.edu/courses/materials-science-and-engineering/3063-polymer-physics-spring007/assignments/polymer_foams.pdf., diakses 20 Agustus 2016,
pukul 00:30 WIB
[14]
The A to Z of Materials., Alumina (Aluminium Oxide)
Types
of
Commercially
Available
The Different
Grades ,
(online),
(www.azom.com/article.aspx?ArticleID=1389). Diakses tanggal
20 Agustus 2016, pukul 01:00 WIB
[15]
K. Devendra, T. Rangaswamy.2012.
Determination of Mechanical
Properties of Al2O3, Mg(OH)2, and SIC Filled E-Glass/ Epoxy
Composites . International Journal of Engineering Research and
Applications (IJERA) Vol. 2, Issue 5, September- October 2012,
page.2028-2033
53
Universitas Sumatera Utara
[1]
Departemen Pertanian RI. 2006. Pedoman Pengelolaan Limbah Industri
Kelapa Sawit. Jakarta
[2]
Magda G. El-Meligy, Zenat A. Nagieb, and K. B. Isis, Effect of Variation
Aluminium Oxide Concentration on the Modified Novolac Stalk
Composite, ISRN Chemical Engineering, vol. 2012, Article ID
263975, 7 Pages, 2012.
[3]
Wikipedia, Material komposit, (online),
http://id.wikipedia.org/wiki/Material_Komposit, diakses tanggal
20 Agustus 2016, pukul 11:50 WIB
[4]
L.H
Sperling,
1997.
Polymeric
Multicomponent
Material:
An
Introduction, New York: Wiley
[5]
Khurmi R.S. AN ISO 9001 : 2000 Company., A Text Book of Mechanical
Engineering, S. Chand & Company Ltd., Ram
Delhi
[6]
Nagar, New
110055.
NTHSA, Bumper Q & A s (online)
http://www.nhtsa.gov/cars/problems/studies/Bumper/Index.html,
diakses tanggal 19 Agustus 2016, pukul 09:15 WIB
[7]
Sapuan S, Maleque M, Hameedullah M, Suddin M, Ismail N. A note on
the conceptual design of polymeric composite automotive bumper
system. J Mater Process Technol 2005;159:145 51.
[8]
Davoodi MM, Sapuan SM, Yunus R. Conceptual design of a polymer
composite automotive bumper energy absorber. J Mater Des
2008;29:1447 52.
[9]
AISI. Steel bumper systems for passenger cars and light trucks. South eld:
American Iron and Steel Institute; 2006.
[10]
National Highway Traf c Safety Administration (NHTSA). Laboratory
test procedure for regulation Part 581 bumper standard safety
assurance; 1990.
52
Universitas Sumatera Utara
[11]
La Heist, Warren G and Ephraim, Frank G. An Evaluation of the Bumper
Standard - As Modified in 1982. NTHSA Report Number DOT
HS 807 072
[12]
Hashim, J., 2003. Pemrosesan Bahan, Edisi pertama, Johor Bahru: Cetak
Ratu Sdn. Bhd.
[13]
Sivertsen, K., Polymeric Foam., (online)
http://ocw.mit.edu/courses/materials-science-and-engineering/3063-polymer-physics-spring007/assignments/polymer_foams.pdf., diakses 20 Agustus 2016,
pukul 00:30 WIB
[14]
The A to Z of Materials., Alumina (Aluminium Oxide)
Types
of
Commercially
Available
The Different
Grades ,
(online),
(www.azom.com/article.aspx?ArticleID=1389). Diakses tanggal
20 Agustus 2016, pukul 01:00 WIB
[15]
K. Devendra, T. Rangaswamy.2012.
Determination of Mechanical
Properties of Al2O3, Mg(OH)2, and SIC Filled E-Glass/ Epoxy
Composites . International Journal of Engineering Research and
Applications (IJERA) Vol. 2, Issue 5, September- October 2012,
page.2028-2033
53
Universitas Sumatera Utara