Paduan Termoplastik Elastomer (Polipropilena-Karet Sir 10 Dan Epdm) Dengan Bahan Pengisi Pulp Tandan Kosong Kelapa Sawit Sebagai Material Peredam Suara
DAFTAR PUSTAKA
Al-Malaika, S., and G. Scot, 1983, “In Degradation and Stabilisation of Poly
olefins “ App. Sci. Pulp, Ltd. London.
Al-Malaika, S. 1997, “Reaktive Antioxidants for Polymer”, in Reactive Modifiers For
Polymer, Al-Malaika,S., 1st ed., Blackie Academicac and Professional,
London.
Aries Himawanto. D, 2007,”Karakteristik Panel Akustik Sampah Kota Pada
Frekwensi Rendah dan Frekwensi Tinggi Akibat Variasi Kadar Bahan
Anorganik”. J. Teknik Gelegar. Vol. 18. No. 01: 19-24.
lppm.UMS.Ac.id/datas…/Gelegar.
Awang. M, H. Ismail., M.A Hazizan, 2008, “ Processing and properties of Polypro
pylene-latex modified waste tyre dust blends (PP/WTDML)”, J. Polymer
Testing. 27 :93-99.
Awang.
M, H. Ismail, 2008, “ Preparation and characterization of
polypropylene/waste tyre dust blends with addition of DCP and HVA-2
(PP/WTDP-HVA2) “. J. Polymer Testing 27: 321-329.
Bahl. A, 2000, “A Textbook of Organic Chemistry”
Company LTD.
New Delhi: S Chand &
Bahruddin, Sumarno, G.Wibawa, Sowarno. 2007, ”Morfologi dan Properti Campu
ran Karet Alam/Polipropilene yang Divulkanisasi Dinamik Dalam Inter
nal Mixer” J. Reaktor. Vol 11. (2):71-77.
Bahruddin, Ida Zahrina, Said Zul Amraini, 2009,”Pengaruh filler Carbon Black
Terhadap Sifat Dan Morfologi Komposit Natural Rubber/Polipropilene”
Seminar Nasional Teknik Kimia Indonesia-SNTKI 2009. Bandung, 19-20
Oktober 2009. ISBN 978-979-98300-1-2.
Bhatnagar,Dr. 2004,”A Textbook of Polymer [Chemistry and Tecknology of
Polymer] : (Processing and application). Volume II. New Delhi: S Chand &
Company LTD.
Blackley. D.C., 1983, “ Synthetic Rubber: Their Chemistry and Technology” Applied
Science Publishers, London and New York.
Bill Meyer, W.F., 1984, “Text Book Of Polimer Sciense”, 3rd ed, Jhon Willey &
Sons, New York.
Brown, S.B., 1992, “Startehis for Compatibilization of Imiscible Polymer Blends”,
Proceeding of 34 th, IUPAC International Symposium on Macromolekuler,
Prague, 13 – 18 july.
Casale, A., Porter, R.S. 1979, “Polymer Stress Reaction”, Academic Press, London.
Chen Qin, Nattakan Soykeabkaew, Ni Xiuyuan, Ton Peijs., 2008, “The effect of fibre
volume fraction and mercerization on the properties of all-cellulose
composites” J. Carbohidrate Polymer, 71: 458-467.
Christina E., Mediastika, 2007,”Potensi Jerami Padi Sebagai Bahan Baku Panel
Akustik” J. Dimensi Teknik Arsitektur. Vol. 25, No. 2:183-189.
Dikland H G., Van Der Does, L. and Bantjes A., 1992.”FT-IR Spectroscopy, A
Mayor Tool For the Analysis of Peroxide Vulcanisation Processes in the
Precence of Coagents. I. Mechanism of EPM Peroxide Vulcanisation with
Aromatic Bis (Allyl) Ester as Coagent”, Rubb. Chem. Tech. 66, 196-213.
Doelle Leslie, L,. 1972,”Environmental Acoustics” Mc Graw-Hill, New York.
Doelle, L.L,.1993,”Akustik Lingkungan” (terjemahan Lea Prasetyo), Jakarta.
Erlangga.
Ebewele, R.O. 1996.,’ Polymer Science and Technology’. New york: CRC press.
Fellahi, S., B.D. Favis dan B. Fisa, 1995, “Tensile Dilatometry of Injection Moulded
HOPE/PA6 Blends”, J. Material Sci, 30,5522.
Fessenden, R J.,Fessenden, J S.1984, ”Kimia Organik Jilid 2” Edisi Kedua. Jakarta :
Erlangga.
Fried, R.J., 1995, “ Polymer Science and Technology”, New York. Prentice Hall
Press.
G.Reethof, L.D. Frank, O. H. McDaniel., 1976,” Absortion of Sound by Tree Bark”
USDA Forest Service Research Paper NE-341, U.S.
Gatcher, M. 1990.,’ Plastics Additives Handbook’. Third Edition. Munich: Hanser
Publisher.
Giancoli, D. C. 2001. “Fisika Dasar”. Edisi V. Jilid 2. Jakarta : Erlangga
Hasan.A,1996.,”Penggunaan Karet Alam dan Paduan Karet Alam Dengan Karet
Sintetik Untuk Anti Vibrasi Pada Kenderaan Bermotor” Tesis, Program studi
Material Science, Program Pasca Sarjana Universitas Indonesia.
Halimatuddahlianana 2007.,’ The effect of N,N-m- Phenylenebismaleamide (HVA2) addition on properties of Polypropylene (PP)/Ethylene-Propylene Diene
Terpolymer (EPDM)/Natural Rubber (NR) vulcanized blends” J. Teknologi
Proses 6(1):52-58.
Halimatuddahliana, Indra Surya, Maulida. 2008., ‘Modifikasi Bahan Elastomer
Termoplastik Polipropilene/Karet Alam (PP/NR) Dengan Proses
Pemvulkanisasian Dinamik.’ Jurnal Penelitian Rekayasa, Vol 1. No.2.
Han-Seung Yang, Dae-Jun Kim, Young-Kyu Lee, Hyun-Joong Kim, Jin-Yong Jeon,
Chun-Won Kang, 2004, ”Possibility of using waste tire composites
reinforced with rice straw as construction materials” J. BIORESOURCE
TECHNOLOGY. 95: 61-65.
Hong Z, Li Bo, Guangsu H, Jia H, 2007, “A novel composite sound absorber with
recycled rubber particles” Journal of Sound and Vibration 304;400-406.
Hornsby, P.R., C.L, Watson., 1995, “ Interfacial Modification of Polypropilene
Composites Filled with Magnesium Hydroxide”, J. Material Sci 30, 5347.
Hosseini Fouladi. M, Mohd Jailani Mohd Nor, Md. Uyub, Zulkarnaen Ali Leman,
2010,”Utilation of coir fiber in multilayer acoustic absorption panel” ,
J.Applied Acoustics 71: 241-249.
Hull, D., 1992,” An Introduction to Composite Material” Cambridge University
Press, London.
Hummel, D.O., 1985,” Infra Red Spectra Polymer in The Medium and Long
Wavelength Region”, Chapter 3, John Willey and Sons, London.
Ismail
H. Suryadiansyah, 2002, ”Thermoplastic elastomers based on
polypropylene/natural rubber and polypropylene/recycle rubber blends” J.
Polymer Testing 21:389-395.
Ismail H. Nizam J.M, H.P.S, Khalil A, 2001,’ The effect of a compatibilizer on the
mechanical properties and mass swell of white rice husk ash filled natural
rubber/LLDPE blend. J. Polymer Testing 20 :125-133.
Ismail H. Edyham MR. Wirjosentono B,2002, “Bambo fibre filled natural rubber
composite; the effects of filler loading and bonding agent” J. Polymer
Testing 21:139-144.
Ismail H, Nasaruddin M.N, Rozman H.D, 1999,” The effect of multifunction additive
in white rice husk ash filled natural rubber compounds’ European Polymer
Juornal 35 (1999) 1429-1437.
Ismail H. Jafri R.M, 1999”Physico-mechanical properties of oil palm wood flour
filled natural rubber composites” J. Polymer Testing 18:381-388.
Ismail H. Rozman HD. Jafri RM. Mohd Ishak ZA, 1997,”Oil palm wood flour
reinforced epoxidized natural rubber composite: The effect of filler content
and size” Eur. Polym. J. Vol.33, No 10-12, pp. 1627-1632.
James, L Withe. 1975.’ Thermoplastic and Rubber Compounds: Technology and
Physical Chemistry’. Canada. Hanser Publishers.
Kiatkam Jornwong S, Along Kornchongtikul, P, Prasassarakich, 1996, “Mechanical
Properties of Glass Fiber Reinforced PVC/SAN Composites” Polimer
Prosessing Towards, The Polymer Processing Socyety, Saia/Australia
Regional Meting, Singapura.
Klason. C, J. Kubat, P. Gathenholm, 1988,”New Wood-Based Composites With
Thermoplastics”, Proceding at the Nesshinbo International Conference on
Cellulosics Utilization in the near future. Tokyo. Jepang.
K. Chan and M. Forasyth, 2000, “Processing and morphological development of
carbon black filled conducting blends using 2 binary host of poly (stryrene
co-acrylonitrile) and poly(srtyrene)”, J. of polymer science, 38(4) : 26662660.
Khuriati. A, Eko Komaruddin, M. Nur, 2006, “Disain Peredam Suara Berbahan
Dasar Sabut Kelapa dan Pengukuran Koefisien Penyerapan Bunyinya”
J. Berkala Fisika. Vol.9, No.1, hal:15-25.
http://puslit.petra.ac.id/files/published/journals/ARS/ARS073502.pdf
Koizumi, T, Tsujiuchi, N, Adachi, A, 2002.” The Development of Sound Absorbing
Material Using Natural Bamboo Fibers”, Jepang WIT Press
www.witpress.com/elibrary/wit..on-the../18.
Krishna, S.Bhuana, 2009,” Teknologi Karet” Sekolah Pasca Sarjana, Program Studi
Kimia, USU. Medan
Kroschwitz, J. L. 1990.” Encyclopedia of Polymer Science and Engineering”. USA.
Jhon Wiley & Sons Inc.
Lewis, H.B and Dougals, H.B, 1993.” Industrial Noise Control Fundamentals and
Aplications”. New York
Masykuri. M, Sulistyo Saputro, Mamiek Subelo., 2005,”Aplikasi Dicumil peroksida
Dalam Proses Crosslinking dan Pengaruhnya Terhadap Sifat Mekanik
Komposit Polimer Polipropilene-Karet alam”. J. ITENAS. No.4, Vol. 8.
File:///C:/Users/Acer/Documents/M.Masykuri.htm.
Mathew, A. P., Packirisamy, S., Thomas, S. 2001,” Studies on the Thermal Stability
of Natural Rubber/Polystyrene Interpenetrating Polymer Networks:
Thermogravimetric Analysis”. J. Polymer Degradation and Stability. 72:
423-439.
McMulan, R. 2002,” Enveromental Science in Building” 5 th Edition, Palgrave. New
York. USA.
Mediastika, C.E. 2009.” Material Akustik Pengendali Kualitas Bunyi Pada Bangu
nan”. ANDI: Jogjakarta.
Methew, N.M and A.J.Tinker, 1986,”Impact-resistant polypropylene/natural rubber
blends” J. Nat. Rubber Res. 1(4): 240-246.
Morton, M. 1987. “Rubber technology”. Van Nonstrand Reinhold Co. New York.
Muhammad, N.H, and Abdullah, I.2003,”Adunan Getah asli/Polistirena (NR/PS)
Bersama HVA-2 sebagai agent Taut Silangan” Pertanika J,Sci &
Technol.11(1):17-29
Nakason. C, Anuat worlee., Shuban Shaleh., 2008,”Effect of vulcanization systems
on properties and recyclability on dynamically cured epoxidazed natural
rubber/polypropylene blends” J. Polymer Testing. 27: 858-869.
Nakason. C, Wannavilai. P, Kaesaman. A, 2006,”Effect of Vulcanization system on
properties of Thermoplastic Vulcanizates based on Epoxidized Natural
rubber / Polypropilene Blends” J. Polymer Testing, 25: 34-41.
Nakason. C, Nuansomsri. K, Kaesaman.A, Kiatkamjornwong. S, 2006,”Dynamic
vulcanization of natural rubber/high-densyity polyethylene blend: Effect ot
compatibilization, blend ratio and curing system” J. Polymer Testing 25:782796.
Naskar. K, Kokot. D, Noordermeer. J.W.M, 2004,”Influence of various Stabilizers on
aging of dicumyl peroxide-cured polypropylene/ethylene-propylene-diene
thermoplastic vulcanizates” J. Polymer Degradation and Stability. 85: 831839.
Ompusunggu, M., 1987, “ Pengawetan Bahan Olah Lateks Kebun”, Warta
Perkaretan, Pusat Penelitian Perkebunan Sungai Putih. 6(2): 8-12.
Pechurai. W, Charoen Nakason, Kannika Sahakaro, 2008,”Thermoplastic natural
rubber based on oil extended NR and HDPE blends: Blend compatibilizer,
phase inversion composition and mechanical properties” J. Polymer Testing
27: 621-631.
Page, D.S., Soendoro, R., 1995,” Prinsip-prinsip Bio Kimia” Edisi Kedua , Erlangga,
Jakarta.
Ramadhan A, dan Fathurrohman IM., 2013,”Pengaruh asam stearat terhadap
karakterisasi Pematangan, Sifat Mekanik dan Swelling vulkanisat Karet
alam dengan bahan Pengisi Organoclay” J. Sains Materi Indonesia. Vol.14.
No.2 ,hal108-113.
Rosen, L., Stephen, 1982, “Fundamental Principles of Polymeric Materials” , John
Wiley & Sons, New York, USA
Rabek, J.F and Ranlay, B., 1975, “Role of singlet oxygen in photooxidative
degradation and photostabilisation of polymer”. Eng& Sci, 15 (1) :17-23.
Ruksakulpiwat. Y, Jatuporn Sridee, Nitinat Suppakarn, Wimonlak Sutapun, 2009,
“Improvement of impact property of natural fiber-polypropilene compo site
by using natural rubber and EPDM rubber” J. Composit : Part B. 40 :619622.
Sariatpanahi H., Nazokdast H. Dabir B., Sadaghiani K and Hemmati M., 2002”
Relationship between Interfasial Tension and Disphersed-Phased Particle
Size in Polymer Blends, I. PP/EPDM”. J. Appl. Polym, SCi, 86, 3148-3159.
Satapathy. S, A. Nag, Golok Bihari Nando, 2010, ”Thermoplastic elastomers from
waste polyethylene and reclaim rubber blends and their composites with fly
ash” . J. IChemE. PSEP-118. No of pages 11.
Sae-Oui. P, Chakrit Sirishinha., Promsak Sa-nguantamarong.,2010,” Properties and
Recyclability of Thermoplastic Elastomer Prepared from Natural Rubber
Powder (NRP) and High Density Polyethylene (HDPE)” J. Polymer Testing,
p:1-6.
Seok Oh. J, A.I. Isayev, M.A. Rogunova, 2003, “Continuous ultrasonic process for in
situ compatibilization of polypropylene/natural rubber blends”, J. Polymer
44:2337-2349.
Severini, F. 1999, “Free Radical Grafting of Maleic Anhydride In Vapour Phase on
Polypropylene Film”. Elsevier Science : Milan.
Sezgin Ersoy., Haluk Küćük., 2009,”Investigation of industrial tea-leaf-fibre waste
material for its sound absorption properties” J. Applied Acoustics, 70: 215220.
Shinoja, S. 2011,.’Oil palm fiber (OPF) and its composites’. Directorate of Oil Palm
Research. Indian Council of Agricultural Research. Pedavegi. Eluru. Andhra
Pradesh 534 450. India.
Sidik, M. 2003.,’ Kimia Polimer’. Jakarta : Pusat Penerbitan Universitas Terbuka.
Silverstein, R.M, Bassler, G.C, Morill, T.C, “ Spektrofotometric Identification of
Organic Compounds” 4th Edition, John Willey and Sons, New York.
Siregar Hamzah, A, 1999,”Peranan Pendispersi Hidrokarbon dan Turunan Gliserida
Minyak Sawit terhadap Kompatibilitas Pengisi Pulp Tandan Kosong Sawit
Dalam Matrik Polipropilena” Tesis S-2. Program Pasca Sarjana USU,
Medan.
Siregar Hamzah, A, 2010,”Pengaruh Penambahan Inisiator Dikumil Peroksida Dan
Divinilbenzen Sebagai Crosslink Pada Kompatibilitas Rasio Campuran
Polietilena Dan Karet Alam SIR 3L” Jurnal Kimia Mulawarman, November
Vol 8, No 1.
Sjostrom, E., 1998, “ Kimia Kayu” Gajah Mada University Press, Yogyakarta.
Siriwardana, S., H. Ismail, Ishiaku, U.S, 2003,”Rheological Properties of
Dynamically Vulcanised Thermoplastic Elastomer Composites of
Polipropilene, Ethylene Propylene Diene Terpolimer and White Rice Husk
Ash: Temperature Dependence” J. Teknologi, 39(A). Keluaran Khas Dis: 1122. Universiti Teknologi Malaysia.
Sperling, L.H., 1986, “Introduction to physical polymer chemistry”. John Wiley &
Sons, New York, USA.
Steven, M.P. 2001.,” Kimia polimer”. Cetakan pertama. Jakarta: Pradnya Paramita.
Schwartz, M.M., 1983.,”Composite Material Handbook” McGraw Hill Book
Company, New York.
Stude Baker, M.L, 1984, “ The Rubber Compound And Its Composition “ Science
And Technology Of Rubber. Academic Press.
Surdia, T., dan Saito, S. 2005.’ Pengetahuan Bahan Teknik’. Jakarta. Pradya
Pramita.
Thitithammawong. A, C.Nakason, K.Sahakaro, J.W.M.Noordermeer, 2007,” Thermo
Plastic Vulcanizates Based on Epoxidized Natural rubber/Polypropilene
Blends: Selection of Optimal Peroxide Type and Concentration in Relati
on to Mixing Condition”. J. European Polymer. 43: 4008-4018.
Thitithammawong. A, C. Nakason, K. Sahakaro, J. Noordermeer,2007, ”Effect of dif
ferent Types of Peroxides on Rheological, Mechanical, and Morphologi
cal Properties of Thermoplastic Vulcanizates Based on Natural rubber /
Polypropylene Blends”. J. Polymer Testing. 26 ; 537-546.
Uma.L.D, Bhagawan, S.S, Thomas. S, 2010,” Dynamic Mechanical Analysis of Pine
apple / Glass Hybrid Fiber Reinforced Polyester” Composites. 31(6): 956965.
Wirjosentono. B, A. N. Sitompul, Sumarno, T.A. Siregar, dan SB. Lubis, (1995),
“Analisis dan Karakteristiik polymer”, USU Press Medan.
Wirjosentono, B. 1997, “Pembuatan poliblen Mampu terdegradasi menggunakan
teknik pengolahan reaktif poliolepin dan serat limbah kosong sawit” FMIPA
– USU, Medan.
Wulandari, Ajeng Silindri, 2007,”Effect of Natural Rubber (NR)/Polypropilene (PP)
Properties”, Undergraduate Thesis,Chemical Enginering,RSK 668.9 Wul p,
2007.
Yanty Lubis. M, 2009,” Pembuatan Komposit Kayu Plastik Dari Serat Kayu Kelapa
Sawit Dan Polipropilena Dengan Menggunakan Polipropilena Yang
Dimodifikasi Dengan Asam Akrilat Sebagai Bahan Penghubung” Tesis
Program Studi Kimia, Sekolah Pasca Sarjana, USU, Medan.
Youneung Lee, Changwhan Joo, 2003,”Sound Absortion Properties Of Recycled
Polyester Fibrous Assembly Absorbers”, J. AUTEX Research, Vol, 3. No, 2,
June @ AUTEX.
Young HD, Freedman OA. 2003. Fisika Universitas. Edisi Kesepuluh. Jilid 2. Alih
Bahasa, Pantur Silaban; Editor, Amalia Safitri, Santika. Jakarta: Erlangga.
Yuhsin Tsai, Jyh-Horng Wu, Yao-Tsu Wu, Chia-Hao Li, Ming-Tsong Leu, 2008,
”Reinforcement of Dynamically Vulcanized EPDM / PP Elastomers Using
Organoclay Fillers” IOP Publising, Sci. Techno. Adv. Mater. 9. 045005
(7pp).
Al-Malaika, S., and G. Scot, 1983, “In Degradation and Stabilisation of Poly
olefins “ App. Sci. Pulp, Ltd. London.
Al-Malaika, S. 1997, “Reaktive Antioxidants for Polymer”, in Reactive Modifiers For
Polymer, Al-Malaika,S., 1st ed., Blackie Academicac and Professional,
London.
Aries Himawanto. D, 2007,”Karakteristik Panel Akustik Sampah Kota Pada
Frekwensi Rendah dan Frekwensi Tinggi Akibat Variasi Kadar Bahan
Anorganik”. J. Teknik Gelegar. Vol. 18. No. 01: 19-24.
lppm.UMS.Ac.id/datas…/Gelegar.
Awang. M, H. Ismail., M.A Hazizan, 2008, “ Processing and properties of Polypro
pylene-latex modified waste tyre dust blends (PP/WTDML)”, J. Polymer
Testing. 27 :93-99.
Awang.
M, H. Ismail, 2008, “ Preparation and characterization of
polypropylene/waste tyre dust blends with addition of DCP and HVA-2
(PP/WTDP-HVA2) “. J. Polymer Testing 27: 321-329.
Bahl. A, 2000, “A Textbook of Organic Chemistry”
Company LTD.
New Delhi: S Chand &
Bahruddin, Sumarno, G.Wibawa, Sowarno. 2007, ”Morfologi dan Properti Campu
ran Karet Alam/Polipropilene yang Divulkanisasi Dinamik Dalam Inter
nal Mixer” J. Reaktor. Vol 11. (2):71-77.
Bahruddin, Ida Zahrina, Said Zul Amraini, 2009,”Pengaruh filler Carbon Black
Terhadap Sifat Dan Morfologi Komposit Natural Rubber/Polipropilene”
Seminar Nasional Teknik Kimia Indonesia-SNTKI 2009. Bandung, 19-20
Oktober 2009. ISBN 978-979-98300-1-2.
Bhatnagar,Dr. 2004,”A Textbook of Polymer [Chemistry and Tecknology of
Polymer] : (Processing and application). Volume II. New Delhi: S Chand &
Company LTD.
Blackley. D.C., 1983, “ Synthetic Rubber: Their Chemistry and Technology” Applied
Science Publishers, London and New York.
Bill Meyer, W.F., 1984, “Text Book Of Polimer Sciense”, 3rd ed, Jhon Willey &
Sons, New York.
Brown, S.B., 1992, “Startehis for Compatibilization of Imiscible Polymer Blends”,
Proceeding of 34 th, IUPAC International Symposium on Macromolekuler,
Prague, 13 – 18 july.
Casale, A., Porter, R.S. 1979, “Polymer Stress Reaction”, Academic Press, London.
Chen Qin, Nattakan Soykeabkaew, Ni Xiuyuan, Ton Peijs., 2008, “The effect of fibre
volume fraction and mercerization on the properties of all-cellulose
composites” J. Carbohidrate Polymer, 71: 458-467.
Christina E., Mediastika, 2007,”Potensi Jerami Padi Sebagai Bahan Baku Panel
Akustik” J. Dimensi Teknik Arsitektur. Vol. 25, No. 2:183-189.
Dikland H G., Van Der Does, L. and Bantjes A., 1992.”FT-IR Spectroscopy, A
Mayor Tool For the Analysis of Peroxide Vulcanisation Processes in the
Precence of Coagents. I. Mechanism of EPM Peroxide Vulcanisation with
Aromatic Bis (Allyl) Ester as Coagent”, Rubb. Chem. Tech. 66, 196-213.
Doelle Leslie, L,. 1972,”Environmental Acoustics” Mc Graw-Hill, New York.
Doelle, L.L,.1993,”Akustik Lingkungan” (terjemahan Lea Prasetyo), Jakarta.
Erlangga.
Ebewele, R.O. 1996.,’ Polymer Science and Technology’. New york: CRC press.
Fellahi, S., B.D. Favis dan B. Fisa, 1995, “Tensile Dilatometry of Injection Moulded
HOPE/PA6 Blends”, J. Material Sci, 30,5522.
Fessenden, R J.,Fessenden, J S.1984, ”Kimia Organik Jilid 2” Edisi Kedua. Jakarta :
Erlangga.
Fried, R.J., 1995, “ Polymer Science and Technology”, New York. Prentice Hall
Press.
G.Reethof, L.D. Frank, O. H. McDaniel., 1976,” Absortion of Sound by Tree Bark”
USDA Forest Service Research Paper NE-341, U.S.
Gatcher, M. 1990.,’ Plastics Additives Handbook’. Third Edition. Munich: Hanser
Publisher.
Giancoli, D. C. 2001. “Fisika Dasar”. Edisi V. Jilid 2. Jakarta : Erlangga
Hasan.A,1996.,”Penggunaan Karet Alam dan Paduan Karet Alam Dengan Karet
Sintetik Untuk Anti Vibrasi Pada Kenderaan Bermotor” Tesis, Program studi
Material Science, Program Pasca Sarjana Universitas Indonesia.
Halimatuddahlianana 2007.,’ The effect of N,N-m- Phenylenebismaleamide (HVA2) addition on properties of Polypropylene (PP)/Ethylene-Propylene Diene
Terpolymer (EPDM)/Natural Rubber (NR) vulcanized blends” J. Teknologi
Proses 6(1):52-58.
Halimatuddahliana, Indra Surya, Maulida. 2008., ‘Modifikasi Bahan Elastomer
Termoplastik Polipropilene/Karet Alam (PP/NR) Dengan Proses
Pemvulkanisasian Dinamik.’ Jurnal Penelitian Rekayasa, Vol 1. No.2.
Han-Seung Yang, Dae-Jun Kim, Young-Kyu Lee, Hyun-Joong Kim, Jin-Yong Jeon,
Chun-Won Kang, 2004, ”Possibility of using waste tire composites
reinforced with rice straw as construction materials” J. BIORESOURCE
TECHNOLOGY. 95: 61-65.
Hong Z, Li Bo, Guangsu H, Jia H, 2007, “A novel composite sound absorber with
recycled rubber particles” Journal of Sound and Vibration 304;400-406.
Hornsby, P.R., C.L, Watson., 1995, “ Interfacial Modification of Polypropilene
Composites Filled with Magnesium Hydroxide”, J. Material Sci 30, 5347.
Hosseini Fouladi. M, Mohd Jailani Mohd Nor, Md. Uyub, Zulkarnaen Ali Leman,
2010,”Utilation of coir fiber in multilayer acoustic absorption panel” ,
J.Applied Acoustics 71: 241-249.
Hull, D., 1992,” An Introduction to Composite Material” Cambridge University
Press, London.
Hummel, D.O., 1985,” Infra Red Spectra Polymer in The Medium and Long
Wavelength Region”, Chapter 3, John Willey and Sons, London.
Ismail
H. Suryadiansyah, 2002, ”Thermoplastic elastomers based on
polypropylene/natural rubber and polypropylene/recycle rubber blends” J.
Polymer Testing 21:389-395.
Ismail H. Nizam J.M, H.P.S, Khalil A, 2001,’ The effect of a compatibilizer on the
mechanical properties and mass swell of white rice husk ash filled natural
rubber/LLDPE blend. J. Polymer Testing 20 :125-133.
Ismail H. Edyham MR. Wirjosentono B,2002, “Bambo fibre filled natural rubber
composite; the effects of filler loading and bonding agent” J. Polymer
Testing 21:139-144.
Ismail H, Nasaruddin M.N, Rozman H.D, 1999,” The effect of multifunction additive
in white rice husk ash filled natural rubber compounds’ European Polymer
Juornal 35 (1999) 1429-1437.
Ismail H. Jafri R.M, 1999”Physico-mechanical properties of oil palm wood flour
filled natural rubber composites” J. Polymer Testing 18:381-388.
Ismail H. Rozman HD. Jafri RM. Mohd Ishak ZA, 1997,”Oil palm wood flour
reinforced epoxidized natural rubber composite: The effect of filler content
and size” Eur. Polym. J. Vol.33, No 10-12, pp. 1627-1632.
James, L Withe. 1975.’ Thermoplastic and Rubber Compounds: Technology and
Physical Chemistry’. Canada. Hanser Publishers.
Kiatkam Jornwong S, Along Kornchongtikul, P, Prasassarakich, 1996, “Mechanical
Properties of Glass Fiber Reinforced PVC/SAN Composites” Polimer
Prosessing Towards, The Polymer Processing Socyety, Saia/Australia
Regional Meting, Singapura.
Klason. C, J. Kubat, P. Gathenholm, 1988,”New Wood-Based Composites With
Thermoplastics”, Proceding at the Nesshinbo International Conference on
Cellulosics Utilization in the near future. Tokyo. Jepang.
K. Chan and M. Forasyth, 2000, “Processing and morphological development of
carbon black filled conducting blends using 2 binary host of poly (stryrene
co-acrylonitrile) and poly(srtyrene)”, J. of polymer science, 38(4) : 26662660.
Khuriati. A, Eko Komaruddin, M. Nur, 2006, “Disain Peredam Suara Berbahan
Dasar Sabut Kelapa dan Pengukuran Koefisien Penyerapan Bunyinya”
J. Berkala Fisika. Vol.9, No.1, hal:15-25.
http://puslit.petra.ac.id/files/published/journals/ARS/ARS073502.pdf
Koizumi, T, Tsujiuchi, N, Adachi, A, 2002.” The Development of Sound Absorbing
Material Using Natural Bamboo Fibers”, Jepang WIT Press
www.witpress.com/elibrary/wit..on-the../18.
Krishna, S.Bhuana, 2009,” Teknologi Karet” Sekolah Pasca Sarjana, Program Studi
Kimia, USU. Medan
Kroschwitz, J. L. 1990.” Encyclopedia of Polymer Science and Engineering”. USA.
Jhon Wiley & Sons Inc.
Lewis, H.B and Dougals, H.B, 1993.” Industrial Noise Control Fundamentals and
Aplications”. New York
Masykuri. M, Sulistyo Saputro, Mamiek Subelo., 2005,”Aplikasi Dicumil peroksida
Dalam Proses Crosslinking dan Pengaruhnya Terhadap Sifat Mekanik
Komposit Polimer Polipropilene-Karet alam”. J. ITENAS. No.4, Vol. 8.
File:///C:/Users/Acer/Documents/M.Masykuri.htm.
Mathew, A. P., Packirisamy, S., Thomas, S. 2001,” Studies on the Thermal Stability
of Natural Rubber/Polystyrene Interpenetrating Polymer Networks:
Thermogravimetric Analysis”. J. Polymer Degradation and Stability. 72:
423-439.
McMulan, R. 2002,” Enveromental Science in Building” 5 th Edition, Palgrave. New
York. USA.
Mediastika, C.E. 2009.” Material Akustik Pengendali Kualitas Bunyi Pada Bangu
nan”. ANDI: Jogjakarta.
Methew, N.M and A.J.Tinker, 1986,”Impact-resistant polypropylene/natural rubber
blends” J. Nat. Rubber Res. 1(4): 240-246.
Morton, M. 1987. “Rubber technology”. Van Nonstrand Reinhold Co. New York.
Muhammad, N.H, and Abdullah, I.2003,”Adunan Getah asli/Polistirena (NR/PS)
Bersama HVA-2 sebagai agent Taut Silangan” Pertanika J,Sci &
Technol.11(1):17-29
Nakason. C, Anuat worlee., Shuban Shaleh., 2008,”Effect of vulcanization systems
on properties and recyclability on dynamically cured epoxidazed natural
rubber/polypropylene blends” J. Polymer Testing. 27: 858-869.
Nakason. C, Wannavilai. P, Kaesaman. A, 2006,”Effect of Vulcanization system on
properties of Thermoplastic Vulcanizates based on Epoxidized Natural
rubber / Polypropilene Blends” J. Polymer Testing, 25: 34-41.
Nakason. C, Nuansomsri. K, Kaesaman.A, Kiatkamjornwong. S, 2006,”Dynamic
vulcanization of natural rubber/high-densyity polyethylene blend: Effect ot
compatibilization, blend ratio and curing system” J. Polymer Testing 25:782796.
Naskar. K, Kokot. D, Noordermeer. J.W.M, 2004,”Influence of various Stabilizers on
aging of dicumyl peroxide-cured polypropylene/ethylene-propylene-diene
thermoplastic vulcanizates” J. Polymer Degradation and Stability. 85: 831839.
Ompusunggu, M., 1987, “ Pengawetan Bahan Olah Lateks Kebun”, Warta
Perkaretan, Pusat Penelitian Perkebunan Sungai Putih. 6(2): 8-12.
Pechurai. W, Charoen Nakason, Kannika Sahakaro, 2008,”Thermoplastic natural
rubber based on oil extended NR and HDPE blends: Blend compatibilizer,
phase inversion composition and mechanical properties” J. Polymer Testing
27: 621-631.
Page, D.S., Soendoro, R., 1995,” Prinsip-prinsip Bio Kimia” Edisi Kedua , Erlangga,
Jakarta.
Ramadhan A, dan Fathurrohman IM., 2013,”Pengaruh asam stearat terhadap
karakterisasi Pematangan, Sifat Mekanik dan Swelling vulkanisat Karet
alam dengan bahan Pengisi Organoclay” J. Sains Materi Indonesia. Vol.14.
No.2 ,hal108-113.
Rosen, L., Stephen, 1982, “Fundamental Principles of Polymeric Materials” , John
Wiley & Sons, New York, USA
Rabek, J.F and Ranlay, B., 1975, “Role of singlet oxygen in photooxidative
degradation and photostabilisation of polymer”. Eng& Sci, 15 (1) :17-23.
Ruksakulpiwat. Y, Jatuporn Sridee, Nitinat Suppakarn, Wimonlak Sutapun, 2009,
“Improvement of impact property of natural fiber-polypropilene compo site
by using natural rubber and EPDM rubber” J. Composit : Part B. 40 :619622.
Sariatpanahi H., Nazokdast H. Dabir B., Sadaghiani K and Hemmati M., 2002”
Relationship between Interfasial Tension and Disphersed-Phased Particle
Size in Polymer Blends, I. PP/EPDM”. J. Appl. Polym, SCi, 86, 3148-3159.
Satapathy. S, A. Nag, Golok Bihari Nando, 2010, ”Thermoplastic elastomers from
waste polyethylene and reclaim rubber blends and their composites with fly
ash” . J. IChemE. PSEP-118. No of pages 11.
Sae-Oui. P, Chakrit Sirishinha., Promsak Sa-nguantamarong.,2010,” Properties and
Recyclability of Thermoplastic Elastomer Prepared from Natural Rubber
Powder (NRP) and High Density Polyethylene (HDPE)” J. Polymer Testing,
p:1-6.
Seok Oh. J, A.I. Isayev, M.A. Rogunova, 2003, “Continuous ultrasonic process for in
situ compatibilization of polypropylene/natural rubber blends”, J. Polymer
44:2337-2349.
Severini, F. 1999, “Free Radical Grafting of Maleic Anhydride In Vapour Phase on
Polypropylene Film”. Elsevier Science : Milan.
Sezgin Ersoy., Haluk Küćük., 2009,”Investigation of industrial tea-leaf-fibre waste
material for its sound absorption properties” J. Applied Acoustics, 70: 215220.
Shinoja, S. 2011,.’Oil palm fiber (OPF) and its composites’. Directorate of Oil Palm
Research. Indian Council of Agricultural Research. Pedavegi. Eluru. Andhra
Pradesh 534 450. India.
Sidik, M. 2003.,’ Kimia Polimer’. Jakarta : Pusat Penerbitan Universitas Terbuka.
Silverstein, R.M, Bassler, G.C, Morill, T.C, “ Spektrofotometric Identification of
Organic Compounds” 4th Edition, John Willey and Sons, New York.
Siregar Hamzah, A, 1999,”Peranan Pendispersi Hidrokarbon dan Turunan Gliserida
Minyak Sawit terhadap Kompatibilitas Pengisi Pulp Tandan Kosong Sawit
Dalam Matrik Polipropilena” Tesis S-2. Program Pasca Sarjana USU,
Medan.
Siregar Hamzah, A, 2010,”Pengaruh Penambahan Inisiator Dikumil Peroksida Dan
Divinilbenzen Sebagai Crosslink Pada Kompatibilitas Rasio Campuran
Polietilena Dan Karet Alam SIR 3L” Jurnal Kimia Mulawarman, November
Vol 8, No 1.
Sjostrom, E., 1998, “ Kimia Kayu” Gajah Mada University Press, Yogyakarta.
Siriwardana, S., H. Ismail, Ishiaku, U.S, 2003,”Rheological Properties of
Dynamically Vulcanised Thermoplastic Elastomer Composites of
Polipropilene, Ethylene Propylene Diene Terpolimer and White Rice Husk
Ash: Temperature Dependence” J. Teknologi, 39(A). Keluaran Khas Dis: 1122. Universiti Teknologi Malaysia.
Sperling, L.H., 1986, “Introduction to physical polymer chemistry”. John Wiley &
Sons, New York, USA.
Steven, M.P. 2001.,” Kimia polimer”. Cetakan pertama. Jakarta: Pradnya Paramita.
Schwartz, M.M., 1983.,”Composite Material Handbook” McGraw Hill Book
Company, New York.
Stude Baker, M.L, 1984, “ The Rubber Compound And Its Composition “ Science
And Technology Of Rubber. Academic Press.
Surdia, T., dan Saito, S. 2005.’ Pengetahuan Bahan Teknik’. Jakarta. Pradya
Pramita.
Thitithammawong. A, C.Nakason, K.Sahakaro, J.W.M.Noordermeer, 2007,” Thermo
Plastic Vulcanizates Based on Epoxidized Natural rubber/Polypropilene
Blends: Selection of Optimal Peroxide Type and Concentration in Relati
on to Mixing Condition”. J. European Polymer. 43: 4008-4018.
Thitithammawong. A, C. Nakason, K. Sahakaro, J. Noordermeer,2007, ”Effect of dif
ferent Types of Peroxides on Rheological, Mechanical, and Morphologi
cal Properties of Thermoplastic Vulcanizates Based on Natural rubber /
Polypropylene Blends”. J. Polymer Testing. 26 ; 537-546.
Uma.L.D, Bhagawan, S.S, Thomas. S, 2010,” Dynamic Mechanical Analysis of Pine
apple / Glass Hybrid Fiber Reinforced Polyester” Composites. 31(6): 956965.
Wirjosentono. B, A. N. Sitompul, Sumarno, T.A. Siregar, dan SB. Lubis, (1995),
“Analisis dan Karakteristiik polymer”, USU Press Medan.
Wirjosentono, B. 1997, “Pembuatan poliblen Mampu terdegradasi menggunakan
teknik pengolahan reaktif poliolepin dan serat limbah kosong sawit” FMIPA
– USU, Medan.
Wulandari, Ajeng Silindri, 2007,”Effect of Natural Rubber (NR)/Polypropilene (PP)
Properties”, Undergraduate Thesis,Chemical Enginering,RSK 668.9 Wul p,
2007.
Yanty Lubis. M, 2009,” Pembuatan Komposit Kayu Plastik Dari Serat Kayu Kelapa
Sawit Dan Polipropilena Dengan Menggunakan Polipropilena Yang
Dimodifikasi Dengan Asam Akrilat Sebagai Bahan Penghubung” Tesis
Program Studi Kimia, Sekolah Pasca Sarjana, USU, Medan.
Youneung Lee, Changwhan Joo, 2003,”Sound Absortion Properties Of Recycled
Polyester Fibrous Assembly Absorbers”, J. AUTEX Research, Vol, 3. No, 2,
June @ AUTEX.
Young HD, Freedman OA. 2003. Fisika Universitas. Edisi Kesepuluh. Jilid 2. Alih
Bahasa, Pantur Silaban; Editor, Amalia Safitri, Santika. Jakarta: Erlangga.
Yuhsin Tsai, Jyh-Horng Wu, Yao-Tsu Wu, Chia-Hao Li, Ming-Tsong Leu, 2008,
”Reinforcement of Dynamically Vulcanized EPDM / PP Elastomers Using
Organoclay Fillers” IOP Publising, Sci. Techno. Adv. Mater. 9. 045005
(7pp).