Analisa Titik Operasi Optimum Pompa Slurry Pada Bucket Wheel Dredger Dengan Variasi Sudut Gali 30°,35°, dan 40°
DAFTAR PUSTAKA
A Albar, R.E Randal, B Dwibarto, B.L Edge (2002) A bucket wheel dredge
system for offshore tin mining beyond the 50 m water depth, Vol.29,
Issue 14, p.1751–1767.
Anonymous, 2011, IHC Merwede & PT Timah 100 Years of Cooperation,
http://www.ihcdredgers.com/fileadmin/IHC_Dredgers__ihcdredgers.
com/DR_tekstfiles/PT_timah_english.pdf, (diakses 8 Agustus 2015).
Beaton, C.F., G.T. Meiklejohn. 1953. Pump Selection Book, Process Development
Division, Amerika Serikat.
Bruce R. Munson, Donald F. Young, Theodore H. Okiishi. 2002. Mekanika
Fluida jilid I. PT. Erlangga. Jakarta.
Daugherty, R. L.; J. B. Franzini; dan E. J. Finnemore, FluidMechanics and
Engineering Applications, 9th ed., McGraw-Hill, New York, 1997.
Elger, Crowe, Williams, and Roberson, 2009, Engineering Fluid Mechanics 9th
Edition, John Wiley & Sons, Inc., New Jersey.
Henriksen, J., Randall, R., and Socolofsky, S.(2012) Near-Field Resuspension
Model for a Cutter Suction Dredge, Journal of Waterway, Port,
Coastal and Ocean Engineering, ASCE, Vol. 138, No. 3, pp. 181-191
Kuhail, Zaher, 2001, an Optimum Method for Designing Dredging System,
Islamic University, Gaza.
Karasik, Igor J., William C. Krutzsc, Warren H. Frase, Joseph Messina. 2001.
Pump Handbook, 3rd edition, Mc Graw Hill, New York.
Lewis, J. M. and Randall, R. E.(2015) Prediction of Minor Loss Coefficient at
Suction Inlet of Cutter Suction Dredge, Journal of Dredging,
Western Dredging Association (WEDA), Vol. 15, No.1 p:14-42
Lobanoff, Val S., Robert R. Ross. 1985. Centrifugal Pumps: Design and
Application, 2nd edition, Butterworth – Heinemann, Amerika
Serikat.
Ma, Y., Vlasblom, W.J., Miedema, S.A., Matousek, V., (2002) Measurement of
Density and Velocity in Hydraulic Transport using Tomography,
Dredging Days 2002, Dredging without boundaries, Casablanca,
Morocco, V64-V73.
Metso Minerals, 2012, Slurry Pump Basic, Sala: Metso Minerals.
Universitas Sumatera Utara
Miedma, S. A, 2013, Dredging Processes the Cutting of Sand, Clay, & Rock
Cutting Theory, Delft University of Technology, Delft.
Miedema, S.A.,(2001) A Numerical Method of Calculating the Dynamic
Behaviour of Hydraulic Transport, 21st Annual Meeting & Technical
Conference of the Western Dredging Association, Houston, USA.
Miedema, S.A., Lu, Z., Matousek, V., (2003) Numerical Simulation of the
Development of Density Waves in a Long Pipeline and the Dynamic
System Behavior, Terra et Aqua 93.
M. Orianto, W.A. Pratikto. 1989. Mekanika Fluida I. BPFE, Yogyakarta.
Mostafa H. Sharqawy, John H. Lienhard V dan Syed M. Zubair, Thermophysical
Properties of Seawater: A Review of Existing Correlations and Data,
Desalination and Water Treatment.
Nayyar, Mohinder L, 2000, Piping Handbook, McGraw-Hill Inc., New York.
Nielsen, Louis S, 1982. Standard Plumbing Engineering Design, 2nd edition, Mc
Graw Hill, New York.
Noerbambang, Soufyan M., Takeo Morimura. 1983.Perancangan
Pemeliharaan Sistem Plambing, Pradnya Paramita, Jakarta,
dan
Rayan, Magdy Abou. Textbook of machines hydraulic, Zagazig University.
Stepanoff, Alexey J., 1957. Centrifugal and Axial flow pumps, 2nd edition, John
Willey and sons, New York.
Sularso, Tahara Haruo, 1991, Pompa & Kompresor Pemilihan, Pemakaian dan
Pemeliharaan, Edisi Keempat, PT.Pradya Paramita, Jakarta.
Sulzers Pump Ltd, 2010, Centrifugal Pump Handbook Third Edition, Elsevier,
Winterthur, Switzerland.
Talley, Lynne D, 2002, Salinity Patterns in the Ocean; from Volume 1 the Earth
System: physical and chemical dimensions of global environmental
change, Chichester.
Tyler G. Hicks, T.W.Edwards, 1971, Teknologi Pemakaian Pompa, Erlangga,Jakarta.
Viktor L. Streeter, Arko Prijono. 1992. Mekanika Fluida Jilid I dan Jilid II. Edisi
delapan. PT. Erlangga, Jakarta. p.: 202-407.
Vlasak, Pavel; Chara, Zdenek; Krupicka, Jan; Konfrst, Jirl (2014) xperimental
investigation of coarse particles-water mixture flow in horizontal and
inclined pipes, Slovak Academy of Science.
Vlasblom, W.J, 2003, Lecture Notes in Dredging Equipment and Technology,
Delft University of Technology, Delft.
Universitas Sumatera Utara
Weir Slurry Group Inc, 2009, Slurry Pump Handbook Fifth Edition , New South
Wales: Weir Slurry Group Inc.
White, Frank M, 2009, Fluid Mechanics Seventh Edition , University of Rhode
Island, McGraw-Hill Inc, New York.
Young, D. R. and Randall, R. E. (2011) Measurement of Forces on A Cutterhead
Using a Laboratory Model Cutter Suction Dredge, Journal of
Dredging Engineering, Western Dredging Association (WEDA) Vol.
11, No. 1, p. 37-53
Universitas Sumatera Utara
A Albar, R.E Randal, B Dwibarto, B.L Edge (2002) A bucket wheel dredge
system for offshore tin mining beyond the 50 m water depth, Vol.29,
Issue 14, p.1751–1767.
Anonymous, 2011, IHC Merwede & PT Timah 100 Years of Cooperation,
http://www.ihcdredgers.com/fileadmin/IHC_Dredgers__ihcdredgers.
com/DR_tekstfiles/PT_timah_english.pdf, (diakses 8 Agustus 2015).
Beaton, C.F., G.T. Meiklejohn. 1953. Pump Selection Book, Process Development
Division, Amerika Serikat.
Bruce R. Munson, Donald F. Young, Theodore H. Okiishi. 2002. Mekanika
Fluida jilid I. PT. Erlangga. Jakarta.
Daugherty, R. L.; J. B. Franzini; dan E. J. Finnemore, FluidMechanics and
Engineering Applications, 9th ed., McGraw-Hill, New York, 1997.
Elger, Crowe, Williams, and Roberson, 2009, Engineering Fluid Mechanics 9th
Edition, John Wiley & Sons, Inc., New Jersey.
Henriksen, J., Randall, R., and Socolofsky, S.(2012) Near-Field Resuspension
Model for a Cutter Suction Dredge, Journal of Waterway, Port,
Coastal and Ocean Engineering, ASCE, Vol. 138, No. 3, pp. 181-191
Kuhail, Zaher, 2001, an Optimum Method for Designing Dredging System,
Islamic University, Gaza.
Karasik, Igor J., William C. Krutzsc, Warren H. Frase, Joseph Messina. 2001.
Pump Handbook, 3rd edition, Mc Graw Hill, New York.
Lewis, J. M. and Randall, R. E.(2015) Prediction of Minor Loss Coefficient at
Suction Inlet of Cutter Suction Dredge, Journal of Dredging,
Western Dredging Association (WEDA), Vol. 15, No.1 p:14-42
Lobanoff, Val S., Robert R. Ross. 1985. Centrifugal Pumps: Design and
Application, 2nd edition, Butterworth – Heinemann, Amerika
Serikat.
Ma, Y., Vlasblom, W.J., Miedema, S.A., Matousek, V., (2002) Measurement of
Density and Velocity in Hydraulic Transport using Tomography,
Dredging Days 2002, Dredging without boundaries, Casablanca,
Morocco, V64-V73.
Metso Minerals, 2012, Slurry Pump Basic, Sala: Metso Minerals.
Universitas Sumatera Utara
Miedma, S. A, 2013, Dredging Processes the Cutting of Sand, Clay, & Rock
Cutting Theory, Delft University of Technology, Delft.
Miedema, S.A.,(2001) A Numerical Method of Calculating the Dynamic
Behaviour of Hydraulic Transport, 21st Annual Meeting & Technical
Conference of the Western Dredging Association, Houston, USA.
Miedema, S.A., Lu, Z., Matousek, V., (2003) Numerical Simulation of the
Development of Density Waves in a Long Pipeline and the Dynamic
System Behavior, Terra et Aqua 93.
M. Orianto, W.A. Pratikto. 1989. Mekanika Fluida I. BPFE, Yogyakarta.
Mostafa H. Sharqawy, John H. Lienhard V dan Syed M. Zubair, Thermophysical
Properties of Seawater: A Review of Existing Correlations and Data,
Desalination and Water Treatment.
Nayyar, Mohinder L, 2000, Piping Handbook, McGraw-Hill Inc., New York.
Nielsen, Louis S, 1982. Standard Plumbing Engineering Design, 2nd edition, Mc
Graw Hill, New York.
Noerbambang, Soufyan M., Takeo Morimura. 1983.Perancangan
Pemeliharaan Sistem Plambing, Pradnya Paramita, Jakarta,
dan
Rayan, Magdy Abou. Textbook of machines hydraulic, Zagazig University.
Stepanoff, Alexey J., 1957. Centrifugal and Axial flow pumps, 2nd edition, John
Willey and sons, New York.
Sularso, Tahara Haruo, 1991, Pompa & Kompresor Pemilihan, Pemakaian dan
Pemeliharaan, Edisi Keempat, PT.Pradya Paramita, Jakarta.
Sulzers Pump Ltd, 2010, Centrifugal Pump Handbook Third Edition, Elsevier,
Winterthur, Switzerland.
Talley, Lynne D, 2002, Salinity Patterns in the Ocean; from Volume 1 the Earth
System: physical and chemical dimensions of global environmental
change, Chichester.
Tyler G. Hicks, T.W.Edwards, 1971, Teknologi Pemakaian Pompa, Erlangga,Jakarta.
Viktor L. Streeter, Arko Prijono. 1992. Mekanika Fluida Jilid I dan Jilid II. Edisi
delapan. PT. Erlangga, Jakarta. p.: 202-407.
Vlasak, Pavel; Chara, Zdenek; Krupicka, Jan; Konfrst, Jirl (2014) xperimental
investigation of coarse particles-water mixture flow in horizontal and
inclined pipes, Slovak Academy of Science.
Vlasblom, W.J, 2003, Lecture Notes in Dredging Equipment and Technology,
Delft University of Technology, Delft.
Universitas Sumatera Utara
Weir Slurry Group Inc, 2009, Slurry Pump Handbook Fifth Edition , New South
Wales: Weir Slurry Group Inc.
White, Frank M, 2009, Fluid Mechanics Seventh Edition , University of Rhode
Island, McGraw-Hill Inc, New York.
Young, D. R. and Randall, R. E. (2011) Measurement of Forces on A Cutterhead
Using a Laboratory Model Cutter Suction Dredge, Journal of
Dredging Engineering, Western Dredging Association (WEDA) Vol.
11, No. 1, p. 37-53
Universitas Sumatera Utara