Pengaruh thermocycling dan Penambahan E- Glass Fiber terhadap Penyerapan Air dan Stabilitas Warna Bahan Basis Gigitiruan Nilon Termoplastik
163
DAFTAR PUSTAKA
AL-Habahbeh R 2007, ‘Water absorption and solubility of provisional crown and
bridge: The effect of the inclusion of polyethylene fibers’, JRMS, vol. 14, no. 1, hal.
22-5.
Aljudy HJ, Hussein ANA, & Safi IN 2013. ‘Effect of surface treatments and
thermocycling on shear bond strength of various artificial teeth with different denture
base materials’, J Bagh College Dentistry, vol. 25, no. 1, pp. 5-13.
Anonymous.
Analytical
Balances.
http://www.sartorius.com/en/products/laboratory/laboratory-balances/analyticalbalances/
Anusavice, KJ 2004, Phillips buku ajar Ilmu bahan kedokteran gigi, Alih bahasa:
Johan Arief Budiman, Susi Purwoko, edisi 10, EGC, Jakarta.
Ardelean, L, Bortun, C, Podariu, A, & Rusu, L, Manufacture of different types
ofthermoplastic.http://cdn.intechopen.com/pdfs/32996/InTechManufacture_of_differ
ent_types_of_thermoplastic.pdf
Ariyani 2013, ‘Pengaruh penambahan fiber glass reinforced terhadap penyerapan air
dan stabilitas warna bahan basis nilon termoplastik’ S2 Tesis, Fakultas Kedokteran
Gigi Universitas Sumatera Utara.
Assuncao WG, Barao VAR, Pita MS, & Goiato MC 2009, ‘Effect of polymerization
methods and thermal cycling on color stability of acrylic resin denture teeth’, J
Prosthet Dent, vol. 102, pp. 385-92.
Budiharto 2008, Metodologi penelitian kesehatan, EGC, Jakarta.
Carr, AB, McGivney, GP, & Brown, DT 2005, MCCrackens’s removable partial
prosthodontics, edisi 11, Elsevier Mosby, Philadelphia.
Celik, C, Yuzugullu, B, Erkut, S, & Yamanel, K 2008, ‘Effects of mouth rinses on
color stability of resin composites’, Eur J dent, vol. 2, pp. 247-253.
Chai, J, Takahashi, Y, Hisama, K, Shimizu, H 2004, ‘Water sorption and dimensional
stability of three glass fibre- reinforced composites’, Int J Prosthodont, vol. 17, pp.
195-9.
164
Chandu, GS, Asnani, P, Gupta, S, & Khan, MF 2015, ‘Comparative evaluation of
effect of water absorption on the surface properties of heat cure acrylic: An in vitro
study’, Journal of international oral health, vol. 7, no. 4, pp. 1-6.
Chhnoeum, T 2008, ‘Effect of denture cleanser on the surface roughness and
hardness of denture base material’ Thesis, Mahidol University.
Dhir, G, Berzins, DW, Dhuru, VB, dkk. 2007, ‘Physical properties of denture base
resin potentially resistant to candida albicans’, J Prosthodont, vol. 16, no. 6, pp. 46572.
Durkan, RK, Ozdemir, T, Pamir, AD, & Usanmaz, A 2009, ‘Water absorption of two
different denture base resins reinforced with dental fiber systems’, Journal of applied
polymer science, vol. 117, pp. 1750-53.
Elshereski, NW 2006, ‘Mechanical and environmental properties of denture base
poly(methyl meracrylate) filled by barium titanate’ Thesis.
Gladstone, S 2010, ‘A comparative evaluation of flexural properties of flexible
denture base material and compression molded heat polymerized denture base
material-an vitro study’, Kerala Dent J, vol. 33, no. 4, pp. 213-5.
Goiato, MC, Antennuci, RMF, Dos Santos, DM, & Pellizer, EP 2009, ‘Evaluation of
hardness and color stability in the soft lining materials after thermocycling and
chemical polishing’, Acta odontol Latinoam, vol. 22, no. 1, pp. 63-8.
Goiato, MC, Santtos, DM, Haddad, MF, & Pesquiera, AA 2010, ‘Effect of
accelerated aging on the microhardness and colour stability of flexible resins for
dentures’, Journal of Braz Oral Res, vol. 24, no. 1, pp. 114-9.
Goiato, MC, Zucolotti, BCR, Santos, DM 2009, ‘Effects of thermocycling on
mechanical properties of soft lining materials’, Acta Odontol Latinoam, vol. 2, no. 3,
pp. 227-32.
Golbidi, F & Asghari, G 2009, ‘The level of residual monomer in acrylic denture
base materials’, Res J Biol Sci, vol. 4, no. 2, pp. 244-9.
Gurbuz, O, Unalan, F, Kursoglu, P 2005, ‘Water resorption and solubility of denture
teeth acrylic resin reinforced with milled glass fiber’, OHDMBSC, vol. 4, no. 4, pp.
57-62.
165
Hanafia, KA 2003, Rancangan percobaan: teori dan aplikasi, edisi 3, PT Raja
Grafindo Persada, Jakarta.
International Standart, 1988, ‘The International organization for standardization’, ISO
4049.
Junior, AAG, Lopes, MWF, Gospar, GF, & Braz, R 2009, ‘Comparative study of
flexural strength and elasticity modulus in two types of direct fiber-reinforced
system’, Braz Oral Res, vol. 23, no. 3, pp. 236-40.
Kamath, S 2006, ‘Comparison of mechanichal properties of high impact
polymethylmethacrylate resin an co-polyamide nylon resin used for denture base
construction’ Dissertation, Departement of prosthodontics, Government dental
college and hospital, Bangalore.
Kanie, T, Fujii, I, Arikawa, H, & Inoue, K 2000, ‘Flexural properties and impact
strength of denture base polymer reinforced with woven glass fibers’, Journal of
Dental Materials, vol. 16, pp. 150-8.
Karacer, O, Polat TN, Tezvergil, A, Lassila, LVJ, & Valittu, PK 2003, ‘The effect of
length and concentration of glass fibers on the mechanical properties of an injection
and a compression molded denture base polymer’, The journal of prosthetic dentistry,
vol. 90, pp. 385-93.
Kortrakulkij, K 2008, ‘Effect of denture cleanser on color stability and flexural
strength of denture base materials’ Thesis, Mahidol University.
Lee, SI, Kim, CW, Kim, YS 2001, ‘Effect of chopped glass fiber on the strength of
heat-cured PMMA resin’, J Korean Acad Prosthodont, vol. 39, no. 6, pp. 590-6.
Lekha, K, Savitha, NP, Roseline, M, & Nadiger, RK 2012, ‘Acetal resin as an
aesthetic clasp material’, Journal of Interdisciplinary Dentistry, vol. 2, no. 1, pp. 114.
Manappallil, JJ 2003, Basic Dental Materials, edisi 2, Jaypee Brothers, New Delhi.
Mancuso, DN, Goiato, MC, Zucolotti, BCR, & Moreno, A 2012, ‘Effect of
thermocycling on hardness, absorption, solubility and colour change of soft liners’,
Gerrodontology, vol. 29, pp. 215-9.
Matinlinna, JP, Lasilla, LVJ, & Valittu, P 2004, ‘An introduction of silanes and their
applications in dentistry’, The International Journal of Prosthodontics, vol. 17, no. 2,
pp. 155-64.
166
Matthews, FL & Rawlings, RD 1999, Composite materials : Engineering and
science, Woodhead publishing limited, Cambridge England.
McCabe, JF & Walls, AWG 2007, Applied dental materials, edisi 9, Blackwell
Munksgaard, London.
Mc.Cracken’s 2000, Removable Partial Prosthodontics,
Company.
edisi 10, CV. Mosby
Mericab, G, Dahib, J, & Ruyterb, E 2008, ‘Cytotoxicity of silica – glass fiber
reinforced composites’, Journal of Dental Materials, pp. 1201-6.
Muetia, R 2011, ‘Pengaruh lama perendaman dalam perasan daun jinten terhadap
perubahan warna resin akrilik’ Skripsi, Fakultas Kedokteran Gigi Universitas
Airlangga.
Nadira, AH & Omar, ZA 2013, ‘Comparative evaluation of color change between
two types of acrylic resin and flexible resin after thermocycling: An In Vitro study’, J
Indian Prosthodont Soc, vol. 13, no. 3, pp. 327-37.
Nascimento, ACS, Muzilli, CA, Miranda, ME, Florio, FM, & Basting, RT 2013,
‘Evaluation of roughness and micromorphology of epoxy paint on cobalt-chromium
alloy before and after thermal cycling’, Braz Oral Res, vol. 27, no. 2, pp. 176-82.
Negrutiu, M, Sinescu, C, Romanu M, dkk. ‘Thermoplastic resins for flexible
framework
removable
partial
dentures’,
(15
Agustus
2010),
http://www.tmj.ro/pdf/2005_number_3_833235561124423.pdf .
Noort, R 2007, Introduction to dental materials, edisi 3, Mosby Elsevier, London.
Pingarron, MDC, ‘Valplast: a new concept of partial removable prosthesis’, (14
Oktober 2009) http://www.informed.es/aragoneses/casos/3.html.
Pollat, TN & Valittu, P 2003, ‘Water sorption, solubility and dimensional changes of
denture base polymers reinforced with short glass fibers’, Journal of biomater appl,
vol. 17, pp. 321-35.
Powers, JM & Sakaguchi, RL 2006, Craig’s Restorative dental materials, edisi 12,
Mosby Elsevier, St. Louis, Missouri.
167
Prashanti, E, Jain, N, & Shenoy, VK 2010, ‘Flexible dentures : A flexible option to
treat edentulous patients’, Journal of Nepal association, vol. 11, no. 1, pp. 85-7.
Pusz, A, Szymiczek, M, & Michalik, K 2010, ‘Ageing process influence on
mechanical properties of polyamide-glass composites applied in dentistry’, Journal of
Achievements in Materials and Manufacturing Engineering, vol. 38, no. 1, pp. 49-55.
Pusz, A, Szymiczek, M, Michalik, K 2011, ‘Topography and the surface of
polyamide – glass composites after the ageing process’, Journal of Achievements in
Materials and Manufacturing Engineering, vol. 44, no. 1, pp. 42-9.
Rahal, JS, Mesquita, MF, Henriques, GEP dkk. 2004, ‘Influence of chemical and
mechanical polishing on water sorption and solubility’, Braz Dent J, vol. 15, no. 3.
Rizzati-Barbosa, CM, Fraga, MA, & Goncalves, TM 2001, ‘Acrylic resin water
sorption under different pressure, temperature, and time conditions’, Mat Res, vol. 4,
no. 1, pp. 1-6.
Ruyter, I.E & Philos D 1994, ‘Color stability of denture base polymers’, Int Journal
Prosthodontic, vol. 7, no. 4, pp. 372-82.
Saied, HM 2011, ‘Influence of dental cleansers on the color stability and surface
roughness of three types of denture bases’, J Bagh College Dentistry, vol. 23, no. 3,
pp. 17-22.
Shah, J, Bulbule, N, Kulkarni, S, Shah, R, & Kakade, D 2014, ‘Comparative
evaluation of sorption, solubility and microhardness of heat cure polymethacrylate
denture base resin and flexible denture base resin’, Journal of Clinical and
Diagnostic Research, vol. 8, no. 8, pp. 1-4.
Tacir, IH, Kama, JD, Zortuk, M, & Eskimez, S 2006, ‘Flexural properties of glass
fibre reinforced acrylic resin polymers’, J Australian Dent, vol. 51, no. 1, pp. 52-6.
Takabayashi, Y 2010, ‘Characteristics of denture thermoplastics resins for non-metal
clasps dentures’, Dental Materials Journal, vol. 29, no. 4, pp. 353-61.
Tuna, SH, Keyf, F, Gurmus, HO, & Uzun, C 2008, ‘The evaluation of water
sorption/solubility on various acrylic resins’, European J Dent, vol. 2, pp. 191-6.
Utami, M, Febrida, R, & Djustiana, N 2009, ‘The comparison of surface hardness
between thermoplastic nylon resin and heat-cured acrylic resin’, Padjadjaran Journal
of Dentistry, vol. 21, no. 3, pp. 200-203.
168
Vakiparta, M, Koskinen, MK 2004, ‘In vitro cytotoxicity of E-Glass fiber weave
preimpregnated with novel bioplymer’, Journal of Material Science Mater Med, pp.
69-72.
Vanessa, MF, Marina, X, Helena, FO, Raphael, FS, & Claudia, HS 2010, ‘Effect of
ageing and immersion in different beverages on properties of denture lining
materials’, J Appl Oral Sci, vol. 18, no. 4, pp. 372-8.
Vojdani, M & Giti, R 2015, ‘Polyamide as a denture base material : A literature
review’, Journal Dent Shiraz Univ Med Sci, vol. 16, pp. 1-9.
Vojvodic, D, Komar, D, & Scaupherl, Z 2009, ‘Influence of different fiber
reinforcements on denture base polyner strength (fiber reinforcements of dental
polymer)’, Medicinski Glasnik, vol. 6, no. 2, pp. 227-34.
Vojvodic, D, Matejicek, F, Schauperl, Z, Mehulic, K, & Segovic, S 2008, ‘Flexural
strength of E-glass fiber reinforced dental polymer and dental high impact strength
resin’, Strojarstvo, vol. 50, no. 4, pp. 221-30.
Vurakkara, VR 2006, ‘An in-vitro study to evaluate the effect of thickness of
different heat cured acrylic denture base materials on water sorption, linear
dimensional change and warpage’ Dissertation, K.L.E Society’s Institute of Dental
Science.
Wieckiewicz, M, Opitz, V, Richter, G, & Boening, KW 2014, ‘Physical properties of
polyamide 12 versus PMMA denture base material’, Biomed Research International,
pp. 1-8.
Wikipedia, Nylon. (11 November 2013) http://en.wikipedia.org/wiki/Nylon.
Wikipedia, Polyamide. (15 Oktober 2013) http://en.wikipedia.org/wiki/Polyamide.
Wikipedia,
Spectrophotometry.
http://en.wikpedia.org/wiki/Spectrophotometry
(15
Maret
2010).
Wise Geek, What is colorimeter. (15 Maret 2010) http://www.wisegeek.com/what-isa-colorimeter.htm.
Zortuk, M, Kilic, K, Uzun, G, Ozturk, A, & Kesim, B 2008, ‘The effect of different
fiber concentrations on the surface roughness of provisional crown and Fixed Partial
Denture’, European Journal of Dentistry, vol. 2, pp. 185-90.
DAFTAR PUSTAKA
AL-Habahbeh R 2007, ‘Water absorption and solubility of provisional crown and
bridge: The effect of the inclusion of polyethylene fibers’, JRMS, vol. 14, no. 1, hal.
22-5.
Aljudy HJ, Hussein ANA, & Safi IN 2013. ‘Effect of surface treatments and
thermocycling on shear bond strength of various artificial teeth with different denture
base materials’, J Bagh College Dentistry, vol. 25, no. 1, pp. 5-13.
Anonymous.
Analytical
Balances.
http://www.sartorius.com/en/products/laboratory/laboratory-balances/analyticalbalances/
Anusavice, KJ 2004, Phillips buku ajar Ilmu bahan kedokteran gigi, Alih bahasa:
Johan Arief Budiman, Susi Purwoko, edisi 10, EGC, Jakarta.
Ardelean, L, Bortun, C, Podariu, A, & Rusu, L, Manufacture of different types
ofthermoplastic.http://cdn.intechopen.com/pdfs/32996/InTechManufacture_of_differ
ent_types_of_thermoplastic.pdf
Ariyani 2013, ‘Pengaruh penambahan fiber glass reinforced terhadap penyerapan air
dan stabilitas warna bahan basis nilon termoplastik’ S2 Tesis, Fakultas Kedokteran
Gigi Universitas Sumatera Utara.
Assuncao WG, Barao VAR, Pita MS, & Goiato MC 2009, ‘Effect of polymerization
methods and thermal cycling on color stability of acrylic resin denture teeth’, J
Prosthet Dent, vol. 102, pp. 385-92.
Budiharto 2008, Metodologi penelitian kesehatan, EGC, Jakarta.
Carr, AB, McGivney, GP, & Brown, DT 2005, MCCrackens’s removable partial
prosthodontics, edisi 11, Elsevier Mosby, Philadelphia.
Celik, C, Yuzugullu, B, Erkut, S, & Yamanel, K 2008, ‘Effects of mouth rinses on
color stability of resin composites’, Eur J dent, vol. 2, pp. 247-253.
Chai, J, Takahashi, Y, Hisama, K, Shimizu, H 2004, ‘Water sorption and dimensional
stability of three glass fibre- reinforced composites’, Int J Prosthodont, vol. 17, pp.
195-9.
164
Chandu, GS, Asnani, P, Gupta, S, & Khan, MF 2015, ‘Comparative evaluation of
effect of water absorption on the surface properties of heat cure acrylic: An in vitro
study’, Journal of international oral health, vol. 7, no. 4, pp. 1-6.
Chhnoeum, T 2008, ‘Effect of denture cleanser on the surface roughness and
hardness of denture base material’ Thesis, Mahidol University.
Dhir, G, Berzins, DW, Dhuru, VB, dkk. 2007, ‘Physical properties of denture base
resin potentially resistant to candida albicans’, J Prosthodont, vol. 16, no. 6, pp. 46572.
Durkan, RK, Ozdemir, T, Pamir, AD, & Usanmaz, A 2009, ‘Water absorption of two
different denture base resins reinforced with dental fiber systems’, Journal of applied
polymer science, vol. 117, pp. 1750-53.
Elshereski, NW 2006, ‘Mechanical and environmental properties of denture base
poly(methyl meracrylate) filled by barium titanate’ Thesis.
Gladstone, S 2010, ‘A comparative evaluation of flexural properties of flexible
denture base material and compression molded heat polymerized denture base
material-an vitro study’, Kerala Dent J, vol. 33, no. 4, pp. 213-5.
Goiato, MC, Antennuci, RMF, Dos Santos, DM, & Pellizer, EP 2009, ‘Evaluation of
hardness and color stability in the soft lining materials after thermocycling and
chemical polishing’, Acta odontol Latinoam, vol. 22, no. 1, pp. 63-8.
Goiato, MC, Santtos, DM, Haddad, MF, & Pesquiera, AA 2010, ‘Effect of
accelerated aging on the microhardness and colour stability of flexible resins for
dentures’, Journal of Braz Oral Res, vol. 24, no. 1, pp. 114-9.
Goiato, MC, Zucolotti, BCR, Santos, DM 2009, ‘Effects of thermocycling on
mechanical properties of soft lining materials’, Acta Odontol Latinoam, vol. 2, no. 3,
pp. 227-32.
Golbidi, F & Asghari, G 2009, ‘The level of residual monomer in acrylic denture
base materials’, Res J Biol Sci, vol. 4, no. 2, pp. 244-9.
Gurbuz, O, Unalan, F, Kursoglu, P 2005, ‘Water resorption and solubility of denture
teeth acrylic resin reinforced with milled glass fiber’, OHDMBSC, vol. 4, no. 4, pp.
57-62.
165
Hanafia, KA 2003, Rancangan percobaan: teori dan aplikasi, edisi 3, PT Raja
Grafindo Persada, Jakarta.
International Standart, 1988, ‘The International organization for standardization’, ISO
4049.
Junior, AAG, Lopes, MWF, Gospar, GF, & Braz, R 2009, ‘Comparative study of
flexural strength and elasticity modulus in two types of direct fiber-reinforced
system’, Braz Oral Res, vol. 23, no. 3, pp. 236-40.
Kamath, S 2006, ‘Comparison of mechanichal properties of high impact
polymethylmethacrylate resin an co-polyamide nylon resin used for denture base
construction’ Dissertation, Departement of prosthodontics, Government dental
college and hospital, Bangalore.
Kanie, T, Fujii, I, Arikawa, H, & Inoue, K 2000, ‘Flexural properties and impact
strength of denture base polymer reinforced with woven glass fibers’, Journal of
Dental Materials, vol. 16, pp. 150-8.
Karacer, O, Polat TN, Tezvergil, A, Lassila, LVJ, & Valittu, PK 2003, ‘The effect of
length and concentration of glass fibers on the mechanical properties of an injection
and a compression molded denture base polymer’, The journal of prosthetic dentistry,
vol. 90, pp. 385-93.
Kortrakulkij, K 2008, ‘Effect of denture cleanser on color stability and flexural
strength of denture base materials’ Thesis, Mahidol University.
Lee, SI, Kim, CW, Kim, YS 2001, ‘Effect of chopped glass fiber on the strength of
heat-cured PMMA resin’, J Korean Acad Prosthodont, vol. 39, no. 6, pp. 590-6.
Lekha, K, Savitha, NP, Roseline, M, & Nadiger, RK 2012, ‘Acetal resin as an
aesthetic clasp material’, Journal of Interdisciplinary Dentistry, vol. 2, no. 1, pp. 114.
Manappallil, JJ 2003, Basic Dental Materials, edisi 2, Jaypee Brothers, New Delhi.
Mancuso, DN, Goiato, MC, Zucolotti, BCR, & Moreno, A 2012, ‘Effect of
thermocycling on hardness, absorption, solubility and colour change of soft liners’,
Gerrodontology, vol. 29, pp. 215-9.
Matinlinna, JP, Lasilla, LVJ, & Valittu, P 2004, ‘An introduction of silanes and their
applications in dentistry’, The International Journal of Prosthodontics, vol. 17, no. 2,
pp. 155-64.
166
Matthews, FL & Rawlings, RD 1999, Composite materials : Engineering and
science, Woodhead publishing limited, Cambridge England.
McCabe, JF & Walls, AWG 2007, Applied dental materials, edisi 9, Blackwell
Munksgaard, London.
Mc.Cracken’s 2000, Removable Partial Prosthodontics,
Company.
edisi 10, CV. Mosby
Mericab, G, Dahib, J, & Ruyterb, E 2008, ‘Cytotoxicity of silica – glass fiber
reinforced composites’, Journal of Dental Materials, pp. 1201-6.
Muetia, R 2011, ‘Pengaruh lama perendaman dalam perasan daun jinten terhadap
perubahan warna resin akrilik’ Skripsi, Fakultas Kedokteran Gigi Universitas
Airlangga.
Nadira, AH & Omar, ZA 2013, ‘Comparative evaluation of color change between
two types of acrylic resin and flexible resin after thermocycling: An In Vitro study’, J
Indian Prosthodont Soc, vol. 13, no. 3, pp. 327-37.
Nascimento, ACS, Muzilli, CA, Miranda, ME, Florio, FM, & Basting, RT 2013,
‘Evaluation of roughness and micromorphology of epoxy paint on cobalt-chromium
alloy before and after thermal cycling’, Braz Oral Res, vol. 27, no. 2, pp. 176-82.
Negrutiu, M, Sinescu, C, Romanu M, dkk. ‘Thermoplastic resins for flexible
framework
removable
partial
dentures’,
(15
Agustus
2010),
http://www.tmj.ro/pdf/2005_number_3_833235561124423.pdf .
Noort, R 2007, Introduction to dental materials, edisi 3, Mosby Elsevier, London.
Pingarron, MDC, ‘Valplast: a new concept of partial removable prosthesis’, (14
Oktober 2009) http://www.informed.es/aragoneses/casos/3.html.
Pollat, TN & Valittu, P 2003, ‘Water sorption, solubility and dimensional changes of
denture base polymers reinforced with short glass fibers’, Journal of biomater appl,
vol. 17, pp. 321-35.
Powers, JM & Sakaguchi, RL 2006, Craig’s Restorative dental materials, edisi 12,
Mosby Elsevier, St. Louis, Missouri.
167
Prashanti, E, Jain, N, & Shenoy, VK 2010, ‘Flexible dentures : A flexible option to
treat edentulous patients’, Journal of Nepal association, vol. 11, no. 1, pp. 85-7.
Pusz, A, Szymiczek, M, & Michalik, K 2010, ‘Ageing process influence on
mechanical properties of polyamide-glass composites applied in dentistry’, Journal of
Achievements in Materials and Manufacturing Engineering, vol. 38, no. 1, pp. 49-55.
Pusz, A, Szymiczek, M, Michalik, K 2011, ‘Topography and the surface of
polyamide – glass composites after the ageing process’, Journal of Achievements in
Materials and Manufacturing Engineering, vol. 44, no. 1, pp. 42-9.
Rahal, JS, Mesquita, MF, Henriques, GEP dkk. 2004, ‘Influence of chemical and
mechanical polishing on water sorption and solubility’, Braz Dent J, vol. 15, no. 3.
Rizzati-Barbosa, CM, Fraga, MA, & Goncalves, TM 2001, ‘Acrylic resin water
sorption under different pressure, temperature, and time conditions’, Mat Res, vol. 4,
no. 1, pp. 1-6.
Ruyter, I.E & Philos D 1994, ‘Color stability of denture base polymers’, Int Journal
Prosthodontic, vol. 7, no. 4, pp. 372-82.
Saied, HM 2011, ‘Influence of dental cleansers on the color stability and surface
roughness of three types of denture bases’, J Bagh College Dentistry, vol. 23, no. 3,
pp. 17-22.
Shah, J, Bulbule, N, Kulkarni, S, Shah, R, & Kakade, D 2014, ‘Comparative
evaluation of sorption, solubility and microhardness of heat cure polymethacrylate
denture base resin and flexible denture base resin’, Journal of Clinical and
Diagnostic Research, vol. 8, no. 8, pp. 1-4.
Tacir, IH, Kama, JD, Zortuk, M, & Eskimez, S 2006, ‘Flexural properties of glass
fibre reinforced acrylic resin polymers’, J Australian Dent, vol. 51, no. 1, pp. 52-6.
Takabayashi, Y 2010, ‘Characteristics of denture thermoplastics resins for non-metal
clasps dentures’, Dental Materials Journal, vol. 29, no. 4, pp. 353-61.
Tuna, SH, Keyf, F, Gurmus, HO, & Uzun, C 2008, ‘The evaluation of water
sorption/solubility on various acrylic resins’, European J Dent, vol. 2, pp. 191-6.
Utami, M, Febrida, R, & Djustiana, N 2009, ‘The comparison of surface hardness
between thermoplastic nylon resin and heat-cured acrylic resin’, Padjadjaran Journal
of Dentistry, vol. 21, no. 3, pp. 200-203.
168
Vakiparta, M, Koskinen, MK 2004, ‘In vitro cytotoxicity of E-Glass fiber weave
preimpregnated with novel bioplymer’, Journal of Material Science Mater Med, pp.
69-72.
Vanessa, MF, Marina, X, Helena, FO, Raphael, FS, & Claudia, HS 2010, ‘Effect of
ageing and immersion in different beverages on properties of denture lining
materials’, J Appl Oral Sci, vol. 18, no. 4, pp. 372-8.
Vojdani, M & Giti, R 2015, ‘Polyamide as a denture base material : A literature
review’, Journal Dent Shiraz Univ Med Sci, vol. 16, pp. 1-9.
Vojvodic, D, Komar, D, & Scaupherl, Z 2009, ‘Influence of different fiber
reinforcements on denture base polyner strength (fiber reinforcements of dental
polymer)’, Medicinski Glasnik, vol. 6, no. 2, pp. 227-34.
Vojvodic, D, Matejicek, F, Schauperl, Z, Mehulic, K, & Segovic, S 2008, ‘Flexural
strength of E-glass fiber reinforced dental polymer and dental high impact strength
resin’, Strojarstvo, vol. 50, no. 4, pp. 221-30.
Vurakkara, VR 2006, ‘An in-vitro study to evaluate the effect of thickness of
different heat cured acrylic denture base materials on water sorption, linear
dimensional change and warpage’ Dissertation, K.L.E Society’s Institute of Dental
Science.
Wieckiewicz, M, Opitz, V, Richter, G, & Boening, KW 2014, ‘Physical properties of
polyamide 12 versus PMMA denture base material’, Biomed Research International,
pp. 1-8.
Wikipedia, Nylon. (11 November 2013) http://en.wikipedia.org/wiki/Nylon.
Wikipedia, Polyamide. (15 Oktober 2013) http://en.wikipedia.org/wiki/Polyamide.
Wikipedia,
Spectrophotometry.
http://en.wikpedia.org/wiki/Spectrophotometry
(15
Maret
2010).
Wise Geek, What is colorimeter. (15 Maret 2010) http://www.wisegeek.com/what-isa-colorimeter.htm.
Zortuk, M, Kilic, K, Uzun, G, Ozturk, A, & Kesim, B 2008, ‘The effect of different
fiber concentrations on the surface roughness of provisional crown and Fixed Partial
Denture’, European Journal of Dentistry, vol. 2, pp. 185-90.