Studi Experimental Pengaruh Variasi Temperatur Dan Putaran Terhadap Sifat Mekanik Campuran Polypropylen, Polyetylen Dan Fiber Glass Menggunakan Mesin Mixer Buatan Sendiri
DAFTAR PUSTAKA
[1]
A. Hamsi, Pengaruh campuran 3% dan 4%PP pada aspal penetrasi 60/70
terhadap kekuatan tekan dan rendam air, Departemen Teknik Mesin, Fakultas
Teknik, USU (2014).
[2]
A. Hamsi, The application of palm oil as a binder for injection molding
process, Proceeding, Malaysian Engineer (2005) pp.80-83.
[3]
Allcock, R.Harry. and Lampe, W.Frederick,1981, Contemporary Polymer
Chemistry, Prentice-Hall. New Jersey.
[4]
Clark,J.G,1991, Kimia Polimer,diterjemahkan oleh : drs. Harry Firman, M.Pd,
ITB. Bandung.
[5]
Charis. 2014. Pengetahuan Bahan Teknik dan Bahan Plastik. (online), (http://
charis7512.blogspot.co.id, diakses tanggal 2 November 2015)
[6]
F. Gapsari dan P.H. Setyarini, Pengaruh fraksi volume terhadap kekuatan tarik
dan lentur komposit resin berpenguat serbuk resin, Jurnal rekayasa mesin,
Vol.1, No.2 (2010) pp 59-64.
[7]
Hibbeler, R.C,2005, Mechanics of Materials, Sixth Edition, Pearson
Education. Singapore.
[8]
Bhatnagar, M.S,2004, A Textbook of Polymers,Volume-II, Indian Institute of
Technology. New Delhi.
[9]
Purba, Febrian. 2012. Mesin Pencampur Mixing Equipment. (online),
(http://febrianipurba.blogspot.co.id, dakses pada tanggal 20 Oktober 2015).
[10]
I.Bauman, D. Curic dan M. Boban, Mixing of solid in different mixing devices,
S¯ adhan¯ a Vol. 33, Part 6 (2008) 721–731.
[11]
I.Bauman, Solid-solid mixing with static mixer, Chem. Biochem. Eng. Q.15
(4) (2001) 159–165.
[12]
O. Djuragic, J. Levic, S. Sredanovic dan L. Levic, Evaluation of homogeneity
in feed by method of microtracers, Archiva Zoolechnica, 12:4 (2009) 85-91.
73
Universitas Sumatera Utara
[13]
Stevens, Malcolm.P,2007, Kimia Polimer,diterjemahkan oleh : Dr.Ir.Iis
Sopyan, M.Eng, PT.Pradnya Paramita. Jakarta.
[14]
Wikipedia, 2010. Elemen Pemanas. (online), (www.wikipedia.com, diakses
pada tanggal 17 Oktober 2015)
[15]
Wikipedia, 2013. Sifat dan Karakteristik Material Plastik Polyethylene.
(online), (www.wikipedia.com, diakses pada tanggal 17 Oktober 2015).
[16]
Budinski G.Kenneth, and Budinski K.Michael,2010, Enginnering Materials,
Ninth Edition, Pearson Education. New Jersey
74
Universitas Sumatera Utara
[1]
A. Hamsi, Pengaruh campuran 3% dan 4%PP pada aspal penetrasi 60/70
terhadap kekuatan tekan dan rendam air, Departemen Teknik Mesin, Fakultas
Teknik, USU (2014).
[2]
A. Hamsi, The application of palm oil as a binder for injection molding
process, Proceeding, Malaysian Engineer (2005) pp.80-83.
[3]
Allcock, R.Harry. and Lampe, W.Frederick,1981, Contemporary Polymer
Chemistry, Prentice-Hall. New Jersey.
[4]
Clark,J.G,1991, Kimia Polimer,diterjemahkan oleh : drs. Harry Firman, M.Pd,
ITB. Bandung.
[5]
Charis. 2014. Pengetahuan Bahan Teknik dan Bahan Plastik. (online), (http://
charis7512.blogspot.co.id, diakses tanggal 2 November 2015)
[6]
F. Gapsari dan P.H. Setyarini, Pengaruh fraksi volume terhadap kekuatan tarik
dan lentur komposit resin berpenguat serbuk resin, Jurnal rekayasa mesin,
Vol.1, No.2 (2010) pp 59-64.
[7]
Hibbeler, R.C,2005, Mechanics of Materials, Sixth Edition, Pearson
Education. Singapore.
[8]
Bhatnagar, M.S,2004, A Textbook of Polymers,Volume-II, Indian Institute of
Technology. New Delhi.
[9]
Purba, Febrian. 2012. Mesin Pencampur Mixing Equipment. (online),
(http://febrianipurba.blogspot.co.id, dakses pada tanggal 20 Oktober 2015).
[10]
I.Bauman, D. Curic dan M. Boban, Mixing of solid in different mixing devices,
S¯ adhan¯ a Vol. 33, Part 6 (2008) 721–731.
[11]
I.Bauman, Solid-solid mixing with static mixer, Chem. Biochem. Eng. Q.15
(4) (2001) 159–165.
[12]
O. Djuragic, J. Levic, S. Sredanovic dan L. Levic, Evaluation of homogeneity
in feed by method of microtracers, Archiva Zoolechnica, 12:4 (2009) 85-91.
73
Universitas Sumatera Utara
[13]
Stevens, Malcolm.P,2007, Kimia Polimer,diterjemahkan oleh : Dr.Ir.Iis
Sopyan, M.Eng, PT.Pradnya Paramita. Jakarta.
[14]
Wikipedia, 2010. Elemen Pemanas. (online), (www.wikipedia.com, diakses
pada tanggal 17 Oktober 2015)
[15]
Wikipedia, 2013. Sifat dan Karakteristik Material Plastik Polyethylene.
(online), (www.wikipedia.com, diakses pada tanggal 17 Oktober 2015).
[16]
Budinski G.Kenneth, and Budinski K.Michael,2010, Enginnering Materials,
Ninth Edition, Pearson Education. New Jersey
74
Universitas Sumatera Utara