Pengaruh Suhu Pengempaan Terhadap Sifat Fisis dan Mekanis Papan Partikel dengan Menggunakan Campuran Perekat Urea Formaldehida dan Phenol Formaldehida

27

DAFTAR PUSTAKA

Bowyer, J.L., Shmulsky, R. dan Haygreen, J. G. 2003. Forest Products and Wood
Science:An Introduction. Ed ke-4. Ames, Iowa: Iowa State Press.
Blomquist, R. F. 1983. Adhesive Bonding of Wood and Other Structural
Materials. Forest Product Technology USDA Forest Service and The
University of Winconsin. Chap.1.
Bufalino, L., Albino, V.C.S., VA de Sá , Corrê a, A.A.R., Mendes, L.M., Almeida
NA. 2012. Particleboards Made from Australian Red Cedar: Processing
Variables and Evaluation of Mixed- Species. J. Tropical Forest Science24
(2): 162 Fore.
Clausen, C.A., Kartal, S.N., Muchl, J. 2000. Properties of Particleboard made
from recycled CCA-treated wood. International Reseach Grub on Wood
Preservation, IRG/WO/00-50146, Stockholm, Sweden.
Haygreen, J. G. dan J. L. Bowyer. 1996. Hasil Hutan dan Ilmu Kayu Suatu
Pengantar. Gajah Mada University Press. Yogyakarta.
Iswanto, A.H., Widya, F., Andi, D.Y., Ahmad, Z. danFauzi, F. 2013.
SifatFisisdanMekanisOriented Strand Board dariStandarKayuTerasetilasi
JurnalIlmudanTeknologiKayuTropis.

Japanese Standards Association. 2003. Japanese Industrial Standard (JIS) A 5908
Particleboard. Tokyo: Japanese Standards Association.
Lee, A.W, Yihai, L. 2003. Selected physical properties of commercial bamboo
flooring. For Prod J 53:23-26.
Kelly, M.W. 1977. Critical Literature Review of Relationship Between
Processing Parameter And Physical Properties of Particleboard. General
Technical Report FPL-10.Department of Agriculture Forest. Wisconsin
University.
Kementrian Kehutanan 2013. Statistika Kehutanan Indonesia 2013. Kementrian
Kehutanan. Jakarta.
Kementrian Kehutanan 2014. Statistika Kehutanan Indonesia 2014. Kementrian
Kehutanan. Jakarta.
Koch, P.,1972, Utilization Of Southern Pinesvol.1: The Raw Material , U.S
Departement of Agriculture, Forest Service.

Universitas Sumatera Utara

28

Nuryawan, A. 2007.Sifat Fisis dan Mekanis OSB dari Kayu Akasia, Ekaliptus dan

Gmelina Berdiameter Kecil [tesis]. Bogor (ID): Institut Pertanian Bogor
(IPB)
Nuryawan, A., Iwan, R. dan Pamona S.S,.2009. Sifat Fisis-Mekanis papan
partikel dari limbah pemanenan kayu. Jurnal ilmu dan teknologi hasil
hutan 2(2):57-63.
Maloney, T.M. 1993. Modern particleboard and dry-process fiberboard
manufacturing (updated edition). Miller Freeman, San Francisco.
Mamza, P.A.P., Ezeh, E C., Gimba, E.C and Arthur, D.E. 2014,” Comporative
study of phenol formaldehyde and urea formaldehyde particleboards from
wood waste for subtainable envirotment” internasional jurnal of
scientific and technology research, vol.3, no.9 pp. 53-61.
Muharam, A.1995. Pengaruh Ukuran Partikel Dan Kerapatan Lembaran Terhadap
Sifat Fisis Dan Mekanis Papan Partikel Ampas Tebu.Skripsi. Fakultas
Teknologi Pertanian. Institute Pertanian Bogor. Bogor.
Ortuno, T.G., Javier A.R., Maria, T. Ferrandezs-Garcia., Manuel Ferrandezs Villena., dan Clara.E. Ferrandez-Gracia. 2011. Evaluation of the physical
and Mechanical properties of particleboard made from gian reed (Arundo
donax L)
Paridah, M.T., Chin, A.M.E. dan Zaidon A. 2001. Bonding properties of
Azadirachta excelsa. Journal of Tropical Forest Products 161–171.
Pari, G. 2002. Teknologi Alternatif Pemanfaatan Limbah Industri Pengolahan

kayu.http://tumoutou.net.
Pizzi, A. Garcia, R.Wang, S.1997. On the networking mechanisms of
additivesaccelerated phenol-formaldehyde polycondensates. Journal of
Applied Polymer Science 66(2), 255-266.
Pizzi, A. 1994. Advanced Wood Adhesives Technology.MarcelDekker, Inc. New
York.
Ruhendi, S. dan Y.S Hadi. 1997. Perekat dan perekatan. Jurusan Teknologi Hasil
Hutan. Fakultas Kehutanan. IPB. Bogor.
Ruhendi, S., Firda, A.S., Desy, N.K., Nurhaida., Sahriyanto, S., Tito, S.dan
Hikma, Y.2007.Analisis Perekatan Kayu. Bogor: Fakultas Kehutanan IPB.
Rusman, D. 2003.Sifat Keasaman beberapa Jenis Kayu dan pengaruh terhadap
keteguhan rekat perekat urea formaldehida [skripsi]. Bogor (ID): Institut
Pertanian Bogor.

Universitas Sumatera Utara

29

Sulastiningsih, I.M., Novitasari dan A. Turoso. 2006. Pengaruh kadar perekat
terhadap sifat papan partikel bambu. Jurnal Penelitian Hasil Hutan 24(1):

1-8. Pusat Penelitian dan Pengembangan Hasil Hutan. Bogor.
Suryadinata, E. 2005. Determinasi Suhu dan Waktu Kempa Optimum dalam
Pembuatan Papan Komposit dari Limbah Kayu dan Karton Gelombang
[Skripsi]. Bogor: Fakultas Kehutanan. Institut Pertanian Bogor.
Wang, S., Dai, C. 2003. Proc. of a Workshop Fundamental of Composite
Processing, Madison, Wisconsin, USA, p.116.
Wahyuningsih, N. S. 2011. Pengaruh Perendaman dan Geometri Partikel tehadap
Kualitas Papan Partikel Sekam Padi. Institut Pertanian Bogor. Bogor.
Widyorini, R., Xu, J., Umemura, K dan Kawai, S. (2005). “Manufacture and
properties of binderless particleboard from bagse. I. Effects of raw
material type, storge methods and manufacturing process,” J. Wood Sci.
51, 648-654.
Winandy, J.E. dan Krzysik, A. 2007 Thermal degradation of wood fibers during
hot-pressing of MDF composites: Part I. Relative effects and benefits of
thermal exposure.Wood Fiber Sci 39(3):450–46.
Yang, H., Kim, D dan Kim, H. 2003. Rice straw–wood particle composite for
sound absorbing wooden construction materials. Bioresource Technology
86: 117–121.
Yusuf, A. 2000. Determinasi Suhu Kempa Optimum Papan Komposit Dari Kayu
Dan Limbah Plastik. Skripsi Fakultas Kehutanan IPB Bogor.

Zhang, Y., Zheng, J., Guo, H., Li, Y dan Lu, M. 2015.Urea formaldehyde resin
with low formaldehyde content modified byphenol formaldehyde
intermediates and properties of its bambooparticleboards.J. Appl. Polym.
Sci.: 1-8. DOI: 10.1002/APP.42280.

Universitas Sumatera Utara