Rancang Bangun Alat Penukar Kalor Tipe Shell and Tube Satu Laluan Cangkang Empat Laluan Tabung
74
DAFTAR PUSTAKA
Cengel, Yunus A. 2003. Heat Transfer: A Practical Approach. Second Edition.
New York: McGraw-Hill, Inc.
Holman, J. P. 1986. Heat Transfer. Sixth Edition. Jakarta:Erlangga.
Incropera P. Frank. 2007. Fundamentals of Heat and Mass Transfer. Seventh
edition. United States: John Wiley & Sons, Inc.
Incropera P. Frank. Fundamentals of Heat and Mass Transfer.Sixth Edition.
United States: John Wiley & Sons, Inc.
Incropera P. Frank. Solution Manual Fundamentals of Heat and Mass
Transfer.Sixth Edition. United States: John Wiley & Sons, Inc.
Kakac, Sadic and Hongtan Liu. 2002. Heat Exchanger Selection, Rating, and
Thermal Design. Second Edition. United States: CRC Press.
Kuppan,T. 2000. Heat Exchanger Design Handbook, New York: Marcel Dekker,
Inc.
Masyitnah, Zuhrina. 2006. Buku Ajar Perpindahan Panas. Medan: Perpustakaan
Universitas Sumatera Utara.
McCabe, Warren L. Smith, Julian C. Harriott, P. 1976. Unit operations of
Chemical Engineering. fifth Edition. New York: McGraw-Hill, Inc.
Shah, Ramesh K. dan Dusan P. Sekulic. 2003. Fundamentals of Heat Exchanger.
United States: John Wiley & Sons, Inc.
Universitas Sumatera Utara
75
Shawabkeh, R. Steps for Design of Heat Exchanger. Department of Chemical
EngineeringKing Fahd University of Petroleum & Minerals.
Sitompul, Tunggul. 1993. Alat Penukar Kalor (Heat Exchanger). Jakarta: PT. Raja
Grafindo Persada.
White, Frank M. 1988. Heat and Mass Transfer. United States of America:
Addison-Wesley Publishing Company, Inc.
https://academia.edu/PerpindahanPanas(HeatTransfer)/16-02-2017/16:36Wib
https://digilib.unila.ac.id/
https://Ilmupengetahuanalam.com/PengertiandanContohPerpindahanPanasSecara
Konduksi,Konveksi,danRadiasi/16-02-2017/15:54Wib
https://repository.usu.ac.id/handle/123456789/458/Jackson2016/
https://repository.usu.ac.id/handle/suheri2013/
http://slideshare.net/mobile/alipane/modul
https://yudiprasetyo53.wordpress.com/
Universitas Sumatera Utara
DAFTAR PUSTAKA
Cengel, Yunus A. 2003. Heat Transfer: A Practical Approach. Second Edition.
New York: McGraw-Hill, Inc.
Holman, J. P. 1986. Heat Transfer. Sixth Edition. Jakarta:Erlangga.
Incropera P. Frank. 2007. Fundamentals of Heat and Mass Transfer. Seventh
edition. United States: John Wiley & Sons, Inc.
Incropera P. Frank. Fundamentals of Heat and Mass Transfer.Sixth Edition.
United States: John Wiley & Sons, Inc.
Incropera P. Frank. Solution Manual Fundamentals of Heat and Mass
Transfer.Sixth Edition. United States: John Wiley & Sons, Inc.
Kakac, Sadic and Hongtan Liu. 2002. Heat Exchanger Selection, Rating, and
Thermal Design. Second Edition. United States: CRC Press.
Kuppan,T. 2000. Heat Exchanger Design Handbook, New York: Marcel Dekker,
Inc.
Masyitnah, Zuhrina. 2006. Buku Ajar Perpindahan Panas. Medan: Perpustakaan
Universitas Sumatera Utara.
McCabe, Warren L. Smith, Julian C. Harriott, P. 1976. Unit operations of
Chemical Engineering. fifth Edition. New York: McGraw-Hill, Inc.
Shah, Ramesh K. dan Dusan P. Sekulic. 2003. Fundamentals of Heat Exchanger.
United States: John Wiley & Sons, Inc.
Universitas Sumatera Utara
75
Shawabkeh, R. Steps for Design of Heat Exchanger. Department of Chemical
EngineeringKing Fahd University of Petroleum & Minerals.
Sitompul, Tunggul. 1993. Alat Penukar Kalor (Heat Exchanger). Jakarta: PT. Raja
Grafindo Persada.
White, Frank M. 1988. Heat and Mass Transfer. United States of America:
Addison-Wesley Publishing Company, Inc.
https://academia.edu/PerpindahanPanas(HeatTransfer)/16-02-2017/16:36Wib
https://digilib.unila.ac.id/
https://Ilmupengetahuanalam.com/PengertiandanContohPerpindahanPanasSecara
Konduksi,Konveksi,danRadiasi/16-02-2017/15:54Wib
https://repository.usu.ac.id/handle/123456789/458/Jackson2016/
https://repository.usu.ac.id/handle/suheri2013/
http://slideshare.net/mobile/alipane/modul
https://yudiprasetyo53.wordpress.com/
Universitas Sumatera Utara