Sintesis Nanoserat Selulosa Dari Tandan Kosong Sawit (TKS) Dengan Menggunakan Oksidator Tetramethyl Piperidine 1 Oxyl (TEMPO)

35

DAFTAR PUSTAKA

Andrady, A.L, 2008. Science and Technology of Polymer Nanofibers, John
Wiley&Sons, New Jersey.
Ammar, A.Z. 2004. Isolasi selulosa Mikrofibrilbdari Serat Sorgum Dengan
Metode Kimiawi. [Skripsi]. Jakarta : Universitas Indonesia.
Anna and Sara. 2010. Preparation of Nanofibers from Pulp Fibers. Chalmers
University of Technology.
Anelli, P. L. : Montanari, F., Quici,S. 1990. A general Synthetic Method for the
Oxidation of Primary Alcohols to Aldehydes. USA : National of Science.
Arief, F . 2013. Tinjauan Fungsi Fisik Aplikasi Tandan Kosong Kelapa sawit, bgi
mesin. Jakarta:Penebar Swadaya.
Barriga, S. 2001. 2,2,6,6- Tetramethyl Piperidine 1 Oxyl (TEMPO). New York :
John Wiley&Son.
Benziman, M., Haigler, C. H., Brown, R. M. J., White, A. R., and Cooper, K. M.
1980. USA: National of Science.
Bledzki, A-K,, Gassan, J. 1990. Composites Reinforced with Cellulose Based
Fibers. Prog Polym sci. 8(6,10)
Ciriminna,R.;Pagliaro, M. 2010 .Industrial Oxidation with Organocatalyst

TEMPO and its Derivates. Organic Process Reserch&Development
Coffey, D.G., Bell, D.A., and Handerson, A., 1995. Cellulose and Cellulose
Derivate, New York: John Wiley&Son.
Collinson, Simons. 2010. The Catalytic Oxidation of Biomass to new Materials
Focusing on Starrch, Cellulose and Lignin. Coordination Chemistry
Reviews. 254 (15-16).
Cowd, M. A. 1991. Kimia Polimer. Bandung: Penerbit ITB.
Darnoko. 1995. Pembuatan Pulp Dari Tandan Kosong Sawit Dengan Penambahan
Surfaktan, Jurnal Penelitian Kelapa Sawit. Volume 3 (12). Medan.

Dodd, J. W. 1987. Thermal Methods. New.York:John Willey and Sons, Inc.
Fauzi, I.Y. 2003. Kelapa Sawit. Jakarta: Penebar Swadaya.

Universitas Sumatera Utara

36

Fengel, D., and Wegner, G. 1995 . Kayu : Kimia, Ultrastruktur, Reaksi-reaksi,
Gajah Mada University press, Yogyakarta.
Gea, S., Reynolds, C.T., Roohpour, N., Wirjosentono, B., Soykeabkaew, N.,

Bilotti, E., dan Peijis, T.2011. Investigation into the Structural,
Morphological, Mechanical and Thermal Behaviour of Bacterial
Cellulose after a Two-Step Purification Process. Bioresource
Technology. 102: 9105-9110.
Gunawan, B. dan Azari, C. D. 2010. Karakterisasi Spektrofotometri I R dan
Scanning Electron Microscopy (SEM) Sensor Gas dari Bahan Polimer
Poly Ethylen Glycol (PEG). Jurnal Sains dan Teknologi.
Grieser, F., Ashokkumar, M., and Sostaric, J.Z. 1999. Sonochemistry and
Sonoluminescence. Kluwer Academic Publishers, Netherlands.
Herawan. (1999). Proses Pengomposan Tandan Kosong Kelapa Sawit Skala Semi
Produksi. Volume 7(15) . Medan : PPKS.
Holtzapple, M. T. 2003. Hemicelluloses In Encyclopedia of Food Sciences and
Nutrition. Washington DC : Academic Press.
Keshk, S.M.A.S and M.A. Haija. (2011). A new Method for Producing
Microcrystalline Cellulose from Gluconacetobacter xylinus and Kenaf,
Carbohydrate Polymers, Vol. 84, pp 1301-1305.
Lu,

P.,

and Hsiesh, Y.L. (2012). Preparation and Characterization of
Cellulose Nanocrystals from rice Straw. Carbohydrate Polymers. 87:
564-573.

Machessault, R. H. Sundararajan, P. R. (1983). In The Polysaccharides. New
York: Academic Press.
Maddu, A. (2008). Sintesis dan Karakterisasi Nanoserat Polianilin. Jurnal
Nanosains & Nanoteknologi Vol. 1 No.2, Juli 2008.
Miller, A. F. And A .M. Donald. Imaging of Anisotropic Cellulose Suspension
Using Enviromental Scanning Electron Microscopy. Biomacromolecules.
11(9-14).
Nuryanto, Eka. (2000). Pemanfaatan Tandan Kosong Kelapa Sawit sebagai
Sumber Bahan Kimia. Medan.
Ohwoavworhua, F. O., Adelakun, T. A. (2005). Some Physical of Characteristics
of Microcrystaline Cellulose Obtained from Raw Cotton of
Cochlospermum planchonii. Tropical Journal of Pharmaceutical
Research. Nigeria.
Poedjiadi, A. (2006). Dasar-dasar Biokimia. Jakarta : Universitas Indonesia.

Universitas Sumatera Utara

37

Prasetyo, D. (2013). Manfaat dan Keunggulan Tanaman Kelapa Sawit. Jakarta :
Penebar Swadaya.
Saito, T. (2004). Tempo mediated oxidation of native cellulose. The effect of
oxidation condition on chemical. Adhesion Science and Technology.
Silverio, H.A., Neto, W.P.S., Dantas, N.O., and Pasquini, D. (2013). Efeect of
Incorporating Cellulose.
Sitorus, Z. (2010). Pemanfaatan Limbah Padat Oulp di PT. TPL sebagai Bahan
Baku pada Pembuatan Keramik Kontruksi. Meand : Universitas
Sumatera Utara.
Steven, M. (2000). Kimia Polimer. Cetakan Pertama. Jakarta : Pradya Paramitha
Steven, M. (2001). Kimia Polimer. Cetakan Pertama. Jakarta : Pradya Paramitha
Stokes,

D. J. (2008). Principles and Practice of
Variable
Pressure/Environmental. New York: John Willey and Sons, Inc.

Stuart, B.H. (2004). Infrared Spectroscopy: Fundamentals And Applications.
John Wiley & Sons Ltd. England.
Subiah, T. (2005). Electrospining of Nanofiber . Journal of Apllied Polymer
Science.
Tarmansyah, K.U., (2007). Pemanfaatan Serat Rami Untuk Pembuatan Selulosa.
Jakarta : Tim Puslitbang Indhan Balitbang Dephan.
Thomas, B., (2014). One-sided surface modification of cellulose fabric by printing
a modified TEMPO-mediated oxidant. University of Inssbruck. Austria.
Voutou, B., and Stefanaki, E.C. (2008). Electron Microscopy: The Basics Pysics
of Advanced Materials. Winter School. Greece.
Wegeneer, D. (1985). Wood: Kimia Ultrastruktur, Reaksi-Reaksi. Yogyakarta:
Gadjah Mada University.
Wibisono, dan Solechuddin., (2002). Buku Kerja Praktek di PT Kertas. ITS Press.
Surabaya.
Widodo. L.U. (2012). Kajian Isoalasi Alpha-Selulosa Batang Tanaman Ubi Kayu
Secara basa. Alpha Selulosa. 21:12-30.
Wirjosentono, B. (1995). Analisis dan Karakterisasi Polimer. USU Press. Medan.

Universitas Sumatera Utara