Remediasi Pasir Terkontaminasi Dengan Metode Pencucian Kolom Dengan Peningkatan Surfaktan Berbahan Baku Sodium Dodecyl Sulphate (SDS)

ABSTRAK
Penelitian ini bertujuan untuk mengetahui kemampuan desorpsi dan
interaksi antara pasir putih yang terkontaminasi ion logam (Cd2+) 50 ppm
dengan variasi konsentrasi SDS dan Variasi Laju Alir SDS pada larutan SDS
dengan pH 7. Konsentrasi SDS yang digunakan adalah 0; 0,5; 1; 2; dan 5 cmc.
Variasi kecepatan aliran SDS yang digunakan adalah 2, 4, 6, 8, dan 10
ml/menit. Penelitian ini terbagi menjadi 2 tahap, yaitu perlakuan awal dengan
melakukan kontaminasi pasir yang diawali dengan pencucian dan pengeringan
hingga kondisi yang seragam. Kemudian dilanjutkan dengan pengukuran
potensi kapasitas adsorpsi dengan system batch adsorption. Tahap Kedua
dilakukan tahap remediasi atau pencucian dengan SDS untuk meninjau
kemampuan desorpsi dan interaksi antara SDS dan Pasir putih yang
terkontaminasi (Cd2+). Pengaruh konsentrasi SDS dalam me-remove atau
mencuci ion logam (Cd2+) terlihat fluktuatif, disebabkan oleh adanya
Channeling effect yang tidak dapat dikontrol. Hasil removal terbesar terdapat
pada saat konsenterasi SDS 2 cmc dengan laju alir SDS 4 ml/menit, sebesar
11,27%. Pengaruh variasi Laju alir signifikan hanya pada saat 0 cmc atau
belum ada penambahan SDS, menunjukkan proses remediasi dipengaruhi oleh
konsenterasi SDS jika adanya Channeling Effect yang tidak dapat dikontrol.
Pengambilan sampel setiap 4 pore volume atau kinetika desorpsi menunjukkan
hasil yang konstan setelah 12 pore volume sampai 16 pore volume, ini

menunjukkan adanya channeling effect yang dominan pada 12 pore volume
sampai 24 pore volume.
Kata kunci : adsorpsi, pasir putih, ion kadmium (Cd2+), remediasi, Channeling
effect

vii
Universitas Sumatera Utara

ABSTRACT
This study aims to determine the ability of desorption and the interaction between the
white sand contaminated with metal ions (Cd2+) 50 ppm with various concentrations
of SDS and the SDS Flow Rate Variations on SDS solution at pH 7. The
concentration of SDS used is 0; 0.5; 1; 2; and 5 cmc. Variations in flow velocity SDS
used is 2, 4, 6, 8, and 10 ml / min. This study is divided into two steps: pretreatment
by sand contamination that begins with washing and drying until the conditions are
uniform. Then proceed with the measurement of the adsorption capacity potential by
batch adsorption system. Second Stage performed remediation phase or washing with
SDS to review the desorption capabilities and interaction between SDS and white
sand is contaminated (Cd2+). Effect of SDS concentration in removing metal ions or
washing the metal ion (Cd2+) looks volatile, caused by the channeling effect that can

not be controlled. The removal results contained in the current The concentration
SDS 2 SDS cmc with a flow rate of 4 ml / min, 11.27%. Effect of flow rate variation
was significant only at the time of 0 cmc or no addition of SDS, suggesting
remediation process is influenced by the SDS The concentration if their Channeling
Effect that can not be controlled. Sampling every four pore volume or desorption
kinetics shows constant returns after 12 pore volumes of up to 16 pore volumes, this
indicates that the dominant channeling effect on 12 pore volumes of up to 24 pore
volumes.
Keyword : adsorption, white sands, cadmium ion (Cd2+), remediation, channeling
effect

viii
Universitas Sumatera Utara