Sintesis Lithium Mangan Oksida (LiMn2O4) untuk Katoda Baterai Lithium Ion
DAFTAR PUSTAKA
Alice, DL, 2011. Electrochemical Analysis by Macro and Microelectrode array.
[Tesis]. Durham: Durham University. Hlm : 13-15.
Arora P, Zhengming Z, 2004. Battery Separators. North Carolina. Chemical Reviews,
104(10): 4422.
Arora, Yukti, 2015. Lithium-Ion Battery Systems: A Process flow and Systems
Framework Designed for Use in The Development of a Lifecycle Energy
Model. [Tesis]. Georgia: Institute of Technology. Hlm, 23.
Brownson D. A. C, 2013. Graphene Electrochemistry : Fundamentals Through to
Electroanalytical Applications. [Thesis]. Manchester: Manchester
Metropolitan University. Hlm, 20.
Carvalho DV, Loeffler N, Kim GT, Passerini S, 2015. High Temperature Stable
Separator for Lithium Batteries Based on SiO2 and Hydroxypropyl Guar
Gum. Membranes, 5 : 633.
Chitra S, Kalyani P, Mohan T, dan Gangandharan R, 1999. Characterization and
Electrochemical Studies of LiMn2O4 Cathode Materials Prepared by
Combustion Method. Journal of Electroceramics, 3:4, 438.
Eriksson T, 2001. LiMn2O4 as a Li-Ion Battery Cathode. From Bulk to Electrolyte
Interface. [Disertasi]. Sweden: Uppsala University Faculty of Science and
Technology 651. Hlm, 13-20.
Julien Christian M, 2014. Comparative Issues of Cathode Materials for Li-Ion
Batteries. inorganics 2, 132-154. ISSN 2304-6740.
Kasvayee KA, 2011. Synthesis of Li-ion battery cathode materials via freeze
granulation. [Thesis]. Swedia: Chalmers University of Technology. Hl, 8.
Kiani MA, Mousavi MF, Rahmanifar MS, 2011. Synthesis of Nano-and MicroParticles of LiMn2O4: Electrochemical Investigation and Assessment as a
Cathode in Li Battery. Int. J. Electrochem. Sci,6 (2011) 2587.
Lagashetty A, Havanoor V, Basavaraja S dan Venkataraman A, 2007. Combusion
Synthesis of LiMn2O4 by Thermal Decomposition of Ocalate Precursors.
Indian Journal of Chemical Technology, 15: 41-44.
Lange Jonathan G, 2012. Improving Lithium-Ion Battery Power and Energy
Densities using Novel Cathode Architectures and Materials. [Thesis].
Urbana-Champaign: University of Illinois.
Alice DL, 2011. Electrochemical Analysis Supported By Macro and Microelectrode
Array. [Tesis]. Durham University Available at Durham E-Theses Online.
Maroni F, Nobili F, 2011. Synthesis and characterization of Advanced Materials for
Li-ion Batteries : 1. Si/RGO Nanocomposite Anodes. 2. V2O5 gel Cathodes.
[Thesis]. Universita di Camerino. Hlm. 34.
Matsui M, Dokko K, Kanamura K, 2010. Surface Layer Formation and Stripping
Process on LiMn2O4 and LiNi1/2Mn3/2O4 Thin Film Electrodes. Journal of The
Electrochemical Society, 157 (2) A121-A129 (2010): A125.
Meti. 2009b. Patent Trend Report, Lithium Ion Battery. Retrieved June 7, 2010.
Mikolajczak C, Kahn M,White K, Long RT, 2011. Lithium-Ion Batteries Hazard and
Use Assessment. The Fire Protection Research Fondation. Hlm. 26.
Oswal M, Paul J, Zhao R, 2010. A Comparative Study of Lithium-Ion batteries.
University of Southern California. Hlm. 2.
Universitas Sumatera Utara
Øystein G, 2012. Thermal characterisation of anode materials for Li-ion batteries.
[Thesis]. Norwegia: Norwegian Universiy of Science and Technology. Hlm.
8
Philippe B, 2013. Insights in Li-ion Battery Interfaces through Photoelectron
Spectroscopy Depth Profiling. Acta Universitatis Upsaliensis. Digital
Comprehensive Summaries of Uppsala Dissertations from the Faculty of
Science and Technology 1041. 200 pp. Uppsala. ISBN 978-91-554-8662-4:
33-47.
Paravasthu Rushendra, 2012. Synthesis and Characterization of Lithium-Ion
Catahode
Materials
in
The
System
(1-x-y)
LiNi1/3Mn1/3Co1/3O2.xLi2MnO3.yLiCoO2. [Thesis]. Colorado: Department of
Mechanical Engineering Colorado State University. Hlm. 1- 5.
Park M, Zhang XC, Chang M, Less GB, Sastry AM, 2010. A Review of Conduction
Phenomena in Li-Ion Batteries. Journal Power of Source, 10.
Seyedahmadian M, Houshyarazar S, Amirshaghaghi A, 2012. Synthesis and
Characterization of Nanosized of Spinel LiMn2O4 via Sol-gel and Freeze
Drying Methods. Bull. Korean Chem. Soc. 2013, 34: 6.
Simonescu CM, 2012. Application of FTIR Spectroscopy in Environmental Studies.
INTECH Open Science.Hlm. 1-2.
Simpson Chester, 2011. Characteristics of Rechargeable Batteries. Texas
Instruments, Literature Number, SNVA 533: 3.
Svens P, 2014. Methods for Testing and Analyzing Lithium-Ion Battery Cells
Intended for Heavy-Duty Hybrid Electric Vehicles. [Thesis]. Sweden: KTH
Royal Institute of Technology Applied Electrochemistry Department of
Chemical Engineering and Technology SE -100 44 Stockholm, Sweden.
Hlm. 11.
Triwibowo J, 2011. Rekayasa Bahan LixTMnxFez (PO4)3 sebagai Katoda Solid
Polymer Battery (SPB) Lithium. [Tesis]. Depok : Universitas Indonesia.
Wang Guoxiu, 2000. Investigations on Electrode Material for Lithium-Ion batteries.
University of Wollongong Research Online, Hlm.13-20
Wibowo H, 2005. Konsep Kimia Dasar. Modul Universitas Negeri Yogyakarta
Xiang, Wu M, Zhao XY, Zhang Z, Chen M, Bai H, Guo JM, 2013. LiMn2O4
Prepared by Liquid Phase Flameless Combustion with F-Doped for Lithiumion Battery Cathode Materials. Advanced Materials Research, 652-654
(2013) pp 825-830: 3.
Yang M, Hou J, 2012. Membranes in Lithium Ion Batteries. Membranes 2012, 2:
373.
Yee HK, Ramakrishnan S, Mohamad AA, 2014. Modelling of Charge/Discharge
cycle of Lithium Ion Battery System. Journal of Quality Measurement and
Analysis, 10(1): 39-47.
Zhang J, Li Y, Wang L, Zhang C, He Hong, 2015. Catalytic oxidation of
Formaldehyde Over manganese Oxides with Different Crystal Structures.
Catalysis Science and Technology, 5: 2305-2313.
Kejie Z, 2012. Mechanics of Electrodes in Lithium-Ion Batteries. [Dissertation].
Cambridge: Harvard University. Hlm. 18.
Universitas Sumatera Utara
Alice, DL, 2011. Electrochemical Analysis by Macro and Microelectrode array.
[Tesis]. Durham: Durham University. Hlm : 13-15.
Arora P, Zhengming Z, 2004. Battery Separators. North Carolina. Chemical Reviews,
104(10): 4422.
Arora, Yukti, 2015. Lithium-Ion Battery Systems: A Process flow and Systems
Framework Designed for Use in The Development of a Lifecycle Energy
Model. [Tesis]. Georgia: Institute of Technology. Hlm, 23.
Brownson D. A. C, 2013. Graphene Electrochemistry : Fundamentals Through to
Electroanalytical Applications. [Thesis]. Manchester: Manchester
Metropolitan University. Hlm, 20.
Carvalho DV, Loeffler N, Kim GT, Passerini S, 2015. High Temperature Stable
Separator for Lithium Batteries Based on SiO2 and Hydroxypropyl Guar
Gum. Membranes, 5 : 633.
Chitra S, Kalyani P, Mohan T, dan Gangandharan R, 1999. Characterization and
Electrochemical Studies of LiMn2O4 Cathode Materials Prepared by
Combustion Method. Journal of Electroceramics, 3:4, 438.
Eriksson T, 2001. LiMn2O4 as a Li-Ion Battery Cathode. From Bulk to Electrolyte
Interface. [Disertasi]. Sweden: Uppsala University Faculty of Science and
Technology 651. Hlm, 13-20.
Julien Christian M, 2014. Comparative Issues of Cathode Materials for Li-Ion
Batteries. inorganics 2, 132-154. ISSN 2304-6740.
Kasvayee KA, 2011. Synthesis of Li-ion battery cathode materials via freeze
granulation. [Thesis]. Swedia: Chalmers University of Technology. Hl, 8.
Kiani MA, Mousavi MF, Rahmanifar MS, 2011. Synthesis of Nano-and MicroParticles of LiMn2O4: Electrochemical Investigation and Assessment as a
Cathode in Li Battery. Int. J. Electrochem. Sci,6 (2011) 2587.
Lagashetty A, Havanoor V, Basavaraja S dan Venkataraman A, 2007. Combusion
Synthesis of LiMn2O4 by Thermal Decomposition of Ocalate Precursors.
Indian Journal of Chemical Technology, 15: 41-44.
Lange Jonathan G, 2012. Improving Lithium-Ion Battery Power and Energy
Densities using Novel Cathode Architectures and Materials. [Thesis].
Urbana-Champaign: University of Illinois.
Alice DL, 2011. Electrochemical Analysis Supported By Macro and Microelectrode
Array. [Tesis]. Durham University Available at Durham E-Theses Online.
Maroni F, Nobili F, 2011. Synthesis and characterization of Advanced Materials for
Li-ion Batteries : 1. Si/RGO Nanocomposite Anodes. 2. V2O5 gel Cathodes.
[Thesis]. Universita di Camerino. Hlm. 34.
Matsui M, Dokko K, Kanamura K, 2010. Surface Layer Formation and Stripping
Process on LiMn2O4 and LiNi1/2Mn3/2O4 Thin Film Electrodes. Journal of The
Electrochemical Society, 157 (2) A121-A129 (2010): A125.
Meti. 2009b. Patent Trend Report, Lithium Ion Battery. Retrieved June 7, 2010.
Mikolajczak C, Kahn M,White K, Long RT, 2011. Lithium-Ion Batteries Hazard and
Use Assessment. The Fire Protection Research Fondation. Hlm. 26.
Oswal M, Paul J, Zhao R, 2010. A Comparative Study of Lithium-Ion batteries.
University of Southern California. Hlm. 2.
Universitas Sumatera Utara
Øystein G, 2012. Thermal characterisation of anode materials for Li-ion batteries.
[Thesis]. Norwegia: Norwegian Universiy of Science and Technology. Hlm.
8
Philippe B, 2013. Insights in Li-ion Battery Interfaces through Photoelectron
Spectroscopy Depth Profiling. Acta Universitatis Upsaliensis. Digital
Comprehensive Summaries of Uppsala Dissertations from the Faculty of
Science and Technology 1041. 200 pp. Uppsala. ISBN 978-91-554-8662-4:
33-47.
Paravasthu Rushendra, 2012. Synthesis and Characterization of Lithium-Ion
Catahode
Materials
in
The
System
(1-x-y)
LiNi1/3Mn1/3Co1/3O2.xLi2MnO3.yLiCoO2. [Thesis]. Colorado: Department of
Mechanical Engineering Colorado State University. Hlm. 1- 5.
Park M, Zhang XC, Chang M, Less GB, Sastry AM, 2010. A Review of Conduction
Phenomena in Li-Ion Batteries. Journal Power of Source, 10.
Seyedahmadian M, Houshyarazar S, Amirshaghaghi A, 2012. Synthesis and
Characterization of Nanosized of Spinel LiMn2O4 via Sol-gel and Freeze
Drying Methods. Bull. Korean Chem. Soc. 2013, 34: 6.
Simonescu CM, 2012. Application of FTIR Spectroscopy in Environmental Studies.
INTECH Open Science.Hlm. 1-2.
Simpson Chester, 2011. Characteristics of Rechargeable Batteries. Texas
Instruments, Literature Number, SNVA 533: 3.
Svens P, 2014. Methods for Testing and Analyzing Lithium-Ion Battery Cells
Intended for Heavy-Duty Hybrid Electric Vehicles. [Thesis]. Sweden: KTH
Royal Institute of Technology Applied Electrochemistry Department of
Chemical Engineering and Technology SE -100 44 Stockholm, Sweden.
Hlm. 11.
Triwibowo J, 2011. Rekayasa Bahan LixTMnxFez (PO4)3 sebagai Katoda Solid
Polymer Battery (SPB) Lithium. [Tesis]. Depok : Universitas Indonesia.
Wang Guoxiu, 2000. Investigations on Electrode Material for Lithium-Ion batteries.
University of Wollongong Research Online, Hlm.13-20
Wibowo H, 2005. Konsep Kimia Dasar. Modul Universitas Negeri Yogyakarta
Xiang, Wu M, Zhao XY, Zhang Z, Chen M, Bai H, Guo JM, 2013. LiMn2O4
Prepared by Liquid Phase Flameless Combustion with F-Doped for Lithiumion Battery Cathode Materials. Advanced Materials Research, 652-654
(2013) pp 825-830: 3.
Yang M, Hou J, 2012. Membranes in Lithium Ion Batteries. Membranes 2012, 2:
373.
Yee HK, Ramakrishnan S, Mohamad AA, 2014. Modelling of Charge/Discharge
cycle of Lithium Ion Battery System. Journal of Quality Measurement and
Analysis, 10(1): 39-47.
Zhang J, Li Y, Wang L, Zhang C, He Hong, 2015. Catalytic oxidation of
Formaldehyde Over manganese Oxides with Different Crystal Structures.
Catalysis Science and Technology, 5: 2305-2313.
Kejie Z, 2012. Mechanics of Electrodes in Lithium-Ion Batteries. [Dissertation].
Cambridge: Harvard University. Hlm. 18.
Universitas Sumatera Utara