PROGRAM PASCASARJANA (S2) Graduate Study (Master) Kompetensi Lulusan

Course Title : Industrial Ergonomics and Safety

No. Kode MK

Sks Code

Nama Mata Kuliah (MK)

Course Title

Credits

SEMESTER II

1 Aplikasi Ergonomi Industri 3 Applied Industrial Engineering 2 Faktor Manusia dalam Perancangan & Pengembangan Produk

3 Human Factors in Product Design & Development 3 Metodologi Penelitian

2 Research Methodology 4 Pilihan 1

2 Elective Courses 1

Jumlah sks/Total of credits

SEMESTER III

1 Ergonomi Makro 2 Macro-Ergonomics 2 Kesehatan & Keselamatan Industri

3 Industrial Health and Safety Engineering 3 Seminar Proposal dan Review Jurnal

3 Journal Review and Proposal Seminar 4 Pilihan 2

2 Elective Courses 2

Jumlah sks/Total of credits

Course Title : Strategic Performance Management

No. Kode MK

Sks Code

Nama Mata Kuliah (MK)

Credits SEMESTER II

Course Title

1 Manajemen Strategi 3 Strategic Management 2 Manajemen Pemasaran dan Hubungan Konsumen

3 Marketing and Customer Relationship Management 3 Metodologi Penelitian

2 Research Methodology 4 Pilihan 1

2 Elective Courses 1

Jumlah sks/Total of credits

SEMESTER III

1 Manajemen Performansi 2 Performance Management 2 Financial Engginering

3 Financial Engginering 3 Seminar Proposal dan Review Jurnal

3 Journal Review and Proposal Seminar 4 Pilihan 2

2 Elective Courses 2

Jumlah sks/Total of credits

Course Title : Quality and Manufacturing Management

No. Kode MK

Sks Code

Nama Mata Kuliah (MK)

Credits SEMESTER II

Course Title

1 Manajemen Kualitas 3 Quality Management

2 Perancangan Sistem Manufaktur 3 Manufacturing System Design

3 Metodologi Penelitian 2 Research Methodology 4 Pilihan 1

2 Elective Courses 1

Jumlah sks/Total of credits

SEMESTER III

1 Teknik Keandalan 2 Reliability Engineering

2 Sustainable Manufacturing 3 Sustainable Manufacturing 3 Seminar Proposal dan Review Jurnal

3 Journal Review and Proposal Seminar 4 Pilihan 2

2 Elective Courses 2

Jumlah sks/Total of credits

Course Title : Industrial System Optimizations

No. Kode MK

Sks Code

Nama Mata Kuliah (MK)

Credits SEMESTER II

Course Title

1 Sistem Dinamik 3 Dynamic System 2 Permodelan Sistem Optimasi

3 Optimization System Modeling 3 Metodologi Penelitian

2 Research Methodology 4 Pilihan 1

2 Elective Courses 1

Jumlah sks/Total of credits

SEMESTER III

1 Simulasi Diskrit 2 Discrete Event Simulation

2 Data Mining untuk Bisnis 3 Data Mining for Business 3 Seminar Proposal dan Review Jurnal

3 Journal Review and Proposal Seminar 4 Pilihan 2

2 Elective Courses 2

Jumlah sks/Total of credits

Course Title : Logistics and Supply Chain Management

No. Kode MK

Sks Code

Nama Mata Kuliah (MK)

Credits SEMESTER II

Course Title

1 Rekayasa Rantai Pasok 3 Supply Chain Engineering

2 Perancangan Sistem Distribusi dan Transportasi 3 Transportation and Distribution System Design

3 Metodologi Penelitian 2 Research Methodology 4 Pilihan 1

2 Elective Courses 1

Jumlah sks/Total of credits

SEMESTER III

1 Teknologi Informasi dalam Rantai Pasok 2 IT for Supply Chain

2 Manajemen Pengadaan dan Material 3 Procurement and Material Management 3 Seminar Proposal dan Review Jurnal

3 Journal Review and Proposal Seminar 4 Pilihan 2

2 Elective Courses 2

Jumlah sks/Total of credits

TI0920XX : Metodologi Penelitian MATA KULIAH/

TI0920XX : Research Methodology COURSE TITLE

Credits: 2 Semester: I

Mata kuliah ini didesain untuk memberikan pemahaman mengenai penelitian dan mengenalkan berbagai metode penelitian yang yang penting dalam bidang teknik industri. Tujuannya adalah membentuk dasar-dasar penelitian yang akan dilaksanakan oleh mahasiswa. Dengan

TUJUAN

ketrampilan dan pengetahuan yang diperoleh dari mata kuliah ini, mahasiswa disiapkan untuk mampu melaksanakan penelitiannya serta

PEMBELAJARAN/ dapat menjadi knowledgable consumers bagi produk-produk penelitian

LEARNING

ilmiah yang ada. OBJECTIVES

This course is designed to provide you with an understanding of research and an introduction to a range of essential research methods in industrial engineering. It forms the basis for all research that students will conduct. Skills developed and knowledge acquired from this course will prepare students to conduct their own research, as well as to be knowledgeable consumers of others' research.

x Intrapersonal dan communication skills

KOMPETENSI/

x Ketrampilan memanfaatkan teknologi informasi x Penguasaan bahasa Inggirs dan/atau bahasa asing lainnya

COMPETENCY

x Intrapersonal and communication skills x Proficiency in ICT x Proficiency in English and or other language

x Pengantar methodology penelitian, Student Centered Learning (SCL), berpikir kritis, Peer Review sebagai cara efektif dalam proses

pembelajaran, pemahaman riset, dan motivasi penelitian. x Penanganan isu-isu yang bersifat praktis dan konseptual,

POKOK

membedakan Tugas Akhir dan Thesis berdasarkan paradigma yang

BAHASAN/SUBJE

digunakan, memilih topik penelitian dan mencari literature, dan mind

CTS

mapping. x Berbagai topik yang berhubungan dengan studi pustaka, berbagai

gaya penulisan daftar pustaka, penulisan alur argumen, referensi, pengaturan pustaka, dan pengenalan EndNote.

x Menentukan desain penelitian, macam-macam metode dalam penelitian, dan tutorial proposal penelitian.

x Penulisan proyek, hasil penelitian, paper, dan presentasi serta x Penulisan proyek, hasil penelitian, paper, dan presentasi serta

Learning (SCL), Critical Thinking, peer review as an effective method in learning process, understanding research, research motivation

x Dealing with practical issues and conceptual issues, distinguishing Final Projects and Thesis based on paradigm used, choosing a

research topic and searching the literature, and mind mapping. x All about literature review, styles in writing a literature review, write a

flow of arguments, referencing, handling literatures, introduction to EndNote.

x Determining the research design, various methodologies in research, research proposal tutorial.

x Writing up the project, the result, a paper and all about presentation and how to prepare it.

1. Hussey, J. and Hussey, R. (1997) Business Research: A Practical

PUSTAKA

Guide for Undergraduate and Postgraduate Students, Macmillan

UTAMA/

Business, London.

2. Cooper, D. R. and Schindler, P. S. (2003), Business Research

REFERENCES

Methods, McGraw Hill, Singapore.

3. Sekaran, U. (2003) Research Methods for Business: A Skill Building Approach, John Wiley & Sons, USA.

TI0920XX : Perencananaan dan Pengendalian Produksi Lanjut MATA KULIAH/

TI0920XX : Advanced Production Planning and Control COURSE TITLE

Credits: 2 Semester: I

Mata kuliah ini bertujuan membekali mahasiswa dengan konsep, metode, dan alat bantu dalam perencanaan dan pernjadwalan sumber daya untuk pemenuhan permintaan konsumen dengan biaya yang efektif. Materi yang dibahas meliputi perbedaan-perbedaan dalam sistem perencanaan

TUJUAN

produksi, teknik-teknik peramalan permintaan,

PEMBELAJARAN/LEARNING

perencanaan penjualan dan operasional, mengelola OBJECTIVES perencanaan kebutuhan material, mangelola pengadaan

untuk permintaan independen, jadwal induk produksi, perencanaan kapasitas, penjadwalan dan urutan pekerjaan, aktifitas kontrol produksi, serta topik-topik lain yang relevan termasuk Just In Time, Theory of Constraint, dan sekilas tentang sistem Enterprise Resource Planning (ERP).

The objective of this course is to equip students with The objective of this course is to equip students with

x Keterampilan Manajerial x Intrapersonal dan communication skills

KOMPETENSI/COMPETENCY x Perancang sistem

x Managerial skills x Intrapersonal and communication skills x System designer

x PengantarPerencanaan dan Pengendalian Produksi (PPC) dan PPC dalam konteks Supply Chain

Management (SCM) x Strategi manufaktur dan implikasinya pada PPC, dan

kerangka PPC. x Proses-proses dalam PPIC:peramalan permintaan,

perencanaan operasi dan penjualan, jadwal induk produksi danbill of materials, pengendalian inventory untuk produk independen, MRP, perencanaan kapasitas (rough cut capacity planning and capacity requirement planning).

POKOK

x Pengendalian aktifitas produksi (penjadwalan operasi,

BAHASAN/SUBJECTS

pengelolaan antrian, input/output kontrol) x Teknik PPIC lainnya: JIT, TOC, peranan ERP.

x Introduction to Production Planning and Control (PPC) and PPC within the context of Supply Chain

Management (SCM) x Manufacturing strategy and its implications to PPC, PPC

framework x PPIC Processes: demand forecasting, sales and

operations planning, master production schedule and bill of materials, inventory control for independent items, MRP, capacity planning (rough cut capacity planning and capacity requirement planning).

x Production activity control (operations scheduling, x Production activity control (operations scheduling,

1. Fogarty, D. W., Blackstone, J. H., and Hoffmann, T. R. (1991).Production and Inventory Management 2 nd Ed.,

PUSTAKA

South Western Publishing.

2. Vollmann, T., Berry, W., Whybark, C., and Jacobs, R. (2005). Manufacturing Planning and Control Systems for

UTAMA/REFERENCES

Supply Chain Management Fifth Ed., McGraw-Hill.

3. Nahmias, S. (2000). Production and Operations Analysis,

4 th Ed., McGraw-Hill/Irwin

TI0920XX : Statistik Industri Lanjut MATA KULIAH/

TI0920XX : Advanced Industrial Statistics

COURSE TITLE

Credits: 2 Semester: I

Memberikan pemahaman mengenai statistik multivariate, pengenalan teknik-teknik multivariate dan contoh aplikasi dalam memecahkan persoalan yang berkaitan dengan data

TUJUAN

dan eksperimen dimana variabel independent lebih dari

PEMBELAJARAN/LEARNING

satu. OBJECTIVES To understand about multivariate statistics, to introduce

multivariate techniques and example application in solving problems related with data and experiments of more than one independent variables.

x Keterampilan memecahkan masalah x Keterampilan memanfaatkan teknologi informasi

KOMPETENSI/COMPETENCY x Ketrampilan Sintesis, integrasi, dan perancangan

x Problem solving Skills x Proficiency in ICT x Synthesizing, integrating, and designing skills

x Intro Multivariate analysis x Simple LR, Anova, Multiple Linear Regression Model,

POKOK

Logistics Regression

BAHASAN/SUBJECTS

x Data manipulation, Principal Components, Factor

analysis x Discrimination analysis x Clustering analysis x Discrimination analysis x Clustering

PUSTAKA

wiley and son

UTAMA/REFERENCES

x Applied multivariate statistics, R Johson and D Wichern,

Prentice Hall x Statistics for engineers and scientist, Walpole

TI0920XX : Akuntansi Manajerial MATA KULIAH/

TI0920XX : Managerial Accounting COURSE TITLE

Credits: 2 Semester: I

Akuntansi Manajerial mengupas bagaimana melakukan akumulasi biaya yang terjadi dalam organisasi untuk menyediakan informasi bagi manajemen internal dalam pengambilan keputusan dan pengendalian biaya. Tujuan kuliah ini adalah memberikan untuk memberikan

TUJUAN

pengetahuan dan ketrampilan bagi mahasiswa untuk memahami konsep-konsep maupun model-model dalam akuntansi manajerial

PEMBELAJARAN/ serta aplikasinya di dalam kasus nyata.

Learning Objective

Managerial Accounting discusses in depth on how to perform costs accumulation involved within an organization to provide information for internal management as decision-making and cost control tool. The course aims to provide students with understanding of concepts and models in managerial accounting and their application in real problems.

x Keterampilan manajerial x Keterampilan memanfaatkan teknologi informasi

KOMPETENSI/

x Ketrampilan Sintesis, integrasi, dan perancangan

Competencies

x Managerial Skills x Proficiency in ICT x Synthesizing, integrating, and designing skills x Managerial Skills x Proficiency in ICT x Synthesizing, integrating, and designing skills

pembebanan biaya berdasar proses, sistem pembebanan biaya berdasar aktifitas.

x Manajemen berbasis aktifitas dan Sistem anggaran berbasis aktifitas.

x Analisis aktifitas, perilaku dan estimasi biaya, analisis titik impas, penetapan biaya standard dan analisis variannya, sistem anggaran

flexible dan analisis variannya.

Pokok Bahasan/

x Akuntansi pertanggungjawaban, desentralisasi, penetapan harga transfer.

Subject

x Introduction to Managerial Accounting, cost classification and concept

x Job order costing, process costing, activity based costing. x Activity Based Management and Activity Based Budgeting. x Activity analysis, behaviour and cost estimation, Break Even Point,

standard cost determination and variance analysis, flexible budgeting system and variance analysis.

x Accounting reporting, decentralization, transfer price determination.

1. Hilton, “Managerial Accounting”, 5th, McGraw Hill, 2008

Referensi/

2. Mowen, H., “Management Accounting”, 2008

References

3. Gray & Rickets, “Cost & Managerial Accounting”, McGraw Hill, 1982

TI0920XX : Penelitian Operasional Lanjut

MATA KULIAH/

TI0920XX : Advanced Operations Research

COURSE TITLE

Credits: 3 Semester: I

Mata kuliah ini bertujuan mengenalkan konsep dasar dan metode penyelesaian permasalahan persamaan linear, pemrograman linear serta aplikasi-aplikasi programa linear dalam permasalahan

TUJUAN

transportasi, penugasan, dan Network Flows Problem. Mahasiswa PEMBELAJARAN/ diarahkan untuk mampu menghitung, menerapkan serta memiliki

ketrampilan memecahkan masalah dengan memanfaatkan software

Learning

yang berkaitan dengan masalah-masalah tersebut.

Objective

The course aims to introduce the basic concepts and solving methods of linear linear equations, linear programming and its applications on the transportation, assignment, and Network Flows Problem. It builds students’ capability to compute, apply, and to have proficiency in The course aims to introduce the basic concepts and solving methods of linear linear equations, linear programming and its applications on the transportation, assignment, and Network Flows Problem. It builds students’ capability to compute, apply, and to have proficiency in

x Keterampilan memanfaatkan teknologi informasi

KOMPETENSI/

x Ketrampilan sintesis, integrasi dan perancangan

Competencies

x Problem solving skills x Proficiency in ICT x Synthesizing, integrating, and designing skills

x Pengantar permodelan yang bersifat deterministik: Linear

Programming, konsep matriks dan vektor. x Metode penyelesaian: metode grafis, metode simplex x Teori Duality

x Aplikasi linear programming dalam transportasi, penugasan dan Network Problems: Maximal Flow Problem, Minimum spanning

tree, Shortest path problem, minimum cost flow

Pokok Bahasan/

x Linear programming tingkat lanjut

Subject

x Introduction to deterministic modeling: Linear Programming, matrix and vector concepts.

x Solving methods: graphical method, simplex method x Duality theorem x Linear Programming applications in transportation, assignment,

and network problems: Maximum flow problem, minimum spanning tree, shortest path problem, minimum cost flow.

x Advanced linear programming

1. Winston, Wayne, L. (2004). Operations Research: Applications and Algorithms. Thomson Learning, Inc. 4th Edition.

2. Taha, Hamdy, A. (2003). Operations Research: An Introduction. Prentice Hall Education, 7th edition.

Referensi/

3. Hillier, F. S. And G. J. Lieberman (2002). Introduction to

References

Operations Reserach. McGraw-Hill.

4. Bazaraa, Mokhtar S. Linear Programming and Network Flows. John Wiley & Sons Inc, 3rd Edition.

5. Ravindran and Philips, Don T., (2000). Operations Research: Principles and Practice. John Wiley.

TI0920XX : Aplikasi Ergonomi Industri MATA KULIAH/

TI0920XX : Applied Industrial Ergonomics

COURSE TITLE

Credits: 3

Semester: II

TUJUAN

Aplikasi Ergonomi Industri membahas tentang aspek-aspek

PEMBELAJARAN/

kemampuan, potensi, dan keterbatasan manusia dalam berinteraksi dengan sistem kerjanya. Juga dibahas dalam mata kuliah ini, implementasi prinsip-prinsip Ergonomi di dalam aplikasi industri.

Applied Industrial Ergonomics discusses about human aspects in terms

LEARNING

of capabilities, potentials, and limitations when interacting with their OBJECTIVES working system. Also discussed in this course, the implementation of

ergonomics principles in industrial applications.

KOMPETENSI/

x Ketrampilan Sintesis, integrasi, dan perancangan x Perancang sistem x Keterampilan manajerial

x Synthesizing, integrating, and designing skills

COMPETENCY

x System designer x Managerial skills

x Dasar-dasar ergonomi dan perkembangan kedepannya.

POKOK

x Human centered/integrated design, prinsip-prinsip ergonomi

BAHASAN/

dalam aplikasi industri, antropometri teknik, keletihan dan daya tahan (cardiovascular), Biomekanik kerja.

x Model manipulatif (kinesiology), model berbasis lingkungan (eksternal), model kognitif (pikiran).

x Interaksi manusia komputer/ usability analysis. x Ergonomi informasi.

x Basic ergonomics and future development.

SUBJECTS

x Human centered/ integrated design, Ergonomics principles in industrial application, engineering anthropometry, fatigue and

endurance (cardiovascular), and Biomechanics of Work. x Manipulative model (kinesiology), environmental model (external), cognitive model (thought). x Human computer interaction/ usability analysis x Information Ergonomics.

PUSTAKA

1. Konz, Stephan. Work Design: Industrial Ergonomics. Scottsdale,

UTAMA/

Arizona: Publishing Horizons, Inc., 1995.

2. Lehto, M. R and Buck, J.R. Intoduction to Human Factors and Ergonomics for Engineers. New York, 2008.

3. Stanton, N., Hedge, A., Brookhuis, K., Salas, E., and Hendrick, H. Handbook of Human Factors and Ergonomics Methods. CRC

Press, 2005.

REFERENCES

4. Tayyari, Fariborz and Smith, James L. Occupational Ergonomics:Principles and Applications. London : Chapman &

Hall, 1997

5. Granjean, E. Fitting the Task to the Man: an Ergonomic Approach. London: Taylor & Fabrics Ltd., 1982.

6. Huchingson, Dale R. New Horizons for Human Factors in Design. New York:McGraw-Hill Book company, 1981.

7. Pulat, B. Mustafa. Fundamentals of Industrial Ergonomics. Englewood Cliffs, N.J.: Prentice-Hall, 1992.

8. Sanders, M.S. and McCormick, E.J. Human Factors in Engineering and Design. New York: McGraw-Hill Inc., 1992.

TI0920XX : Faktor Manusia dalam Perancangan

&Pengembangan Produk

MATA KULIAH/ COURSE TITLE

TI0920XX : Human Factors in Product Design & Development

Credits: 3 Semester: II

Manusia sebagai pengkonsumsi produk merupakan faktor paling

TUJUAN

penting dalam perancangan produk. Mata kuliah ini bertujuan untuk memberikan pemahaman mengenai bagaimana merancang produk

PEMBELAJARAN/

dengan mempertimbangkan faktor manusia baik secara kognitif maupun psikomotorik. Akan dibahas pula tentang bagaimana

mengidentifikasi peluang-peluang pengembangan produk inovatif, menerjemahkan perilaku konsumen dalam Voice of Customer dan

mentransformasikannya dalam wujud produk jadi, serta memahami trade off antara biaya dan kualitas dalam spesifikasi produk.

Human being as the products consumer is the most important factor of product design. The course aims to deliver understanding on how to

design industrial product by considering human factors, including

LEARNING

cognitive and psychomotoric. It also provides students with techniques to identify opportunities of innovative product development, to

OBJECTIVES translate customers’ behaviour into Voice of Customer and transform it into a finished product, as well as to understand the trade off

function of cost and quality in product spesification.

KOMPETENSI/

x Ketrampilan Sintesis, integrasi, dan perancangan x Perancang sistem

x Keterampilan manajerial

COMPETENCY

x Synthesizing, integrating, and designing skills x System designer x Synthesizing, integrating, and designing skills x System designer

x Perilaku manusia dan perancangan produk, desain ergonomi dalam perancangan produk, dan Kansei engineering sebagai

strategi pengembangan produk berbasis ergonomi. x Ethnography: observasi perilaku dan kebutuhan tersembunyi

konsumen, Quality Function Deployment (QFD). x Fase-fase perancangan produk:

- Fase 0: Perencanaan produk

POKOK

- Fase 1: Pengembangan konsep dan inovasi

BAHASAN/

- Fase 2: Perancangan tingkatan sistem - Fase 3: Perancangan detail produk - Fase 4: prototyping - Fase 5: Pengujian dan perbaikan

x Studi kasus. x Industrial product definition and new product design.

x Human behaviour and product design, ergonomic design in product design, Kansei engineering as an ergonomic based strategy in product development.

x Ethnography: behaviour observation and hidden needs of customers.

SUBJECTS

x Phases in product design:

- Phase 0: Product planning - Phase 1: Innovation and concept development - Phase 2: Design of system detail - Phase 3: Design of product detail - Phase 4: prototyping - Phase 5: Testing and evaluating

x Case studies.

1. Ulrich, K.T. and Eppinger, S.D. Product Design and Development. New York: McGraw-Hill, Inc., 2000.

2. Loch, C. and Kavadias, S. (2008) Handbook of New Product Development Management. Elsevier

PUSTAKA

3. UTAMA/ Annacchino, M. (2003) New Product Development From Initial

Idea to Product Management. Elsevier. ISBN : 0750677325

4. Cross, Nigel. Engineering Design Methods: Strategies for Product Design. New York; John Wiley & Sons, 1996.

REFERENCES

5. Roozenburg, NFM and J. Eekels. Product Design: Fundamentals and Methods. Chicester: John Wiley & Sons, 1995.

6. Urban, Glen L. and John R. Hauser. Design and Marketing of New Products. Englewood Cliffs, NJ : Prentice-Hall Inc., 1993.

7. Wright, Ian. Design Methods in Engineering and Product Design.

London: McGraw-Hill Co., 1998.

TI0920XX : Ergonomi Makro MATA KULIAH/

TI0920XX : Macro Ergonomics COURSE TITLE

Credits: 2 Semester: III

Mata kuliah ini juga disebut socio-technical study, mempelajari interface antara manusia dan teknologi. Misalnya studi tentang dampak teknologi terhadap hubungan sosial dan organisasi. Tujuan dari mata kuliah ini adalah menciptakan suatu sistem kerja yang

TUJUAN

harmonis sehingga berdampak pada peningkatan produktivitas, PEMBELAJARAN/ kepuasan kerja, kesehatan dan keselamatan kerja, dan komitmen

Also called socio-technical study, this course studies the interface between society and technology. For example the study of the impacts of technology for social relationships and institution. It aims to create fully harmonized work system, which result in improved productivity, job satisfaction, health & safety, and employee commitment.

x Perancang sistem x Keterampilan memanfaatkan teknologi informasi

KOMPETENSI/

x Ketrampilan Sintesis, integrasi, dan perancangan

Competencies

x System designer x Proficiency in ICT x Synthesizing, integrating, and designing skills

x Pengantar ergonomi makro x Konsep pemodelan sistem dan Simulasi sistem dinamik,

Participatory concept and The Team x Analisa system kerja dengan SAT (System Analysis Tool) dan MAS

(Macroergonomics Analysis of Structure) x Klaster Industri sebagai contoh studi kasus Ergonomi Makro

Pokok Bahasan/

x Macroergonomics methods:

Subject

- Macroergonomics Organizational Questionnaire Survey (MOQS) - HITOP Analysis (High Integration of Technology, Organization,

and People) - The CIMOP system (Computer Integrated Manufacturing,

Organization, and People) - Anthropotechnology; terdiri atas: physical anthropology/ body

dimension, cultural anthropology/ value system, cognitive anthropology/ cognitive model.

- Macroergonomic Analysis dan Design (MEAD) - TOP – Modeler

x Introduction to Macro Ergonomics x System modeling conceptand Dynamics System Simulation,

Participatory concept and The Team x Work System Analysis using SAT (System Analysis Tool) and MAS

(Macroergonomics Analysis of Structure) x Industrial cluster as a case study of Macro Ergonomics x Macroergonomics methods:

- Macroergonomics Organizational Questionnaire Survey (MOQS) - HITOP Analysis (High Integration of Technology, Organization,

and People) - The CIMOP system (Computer Integrated Manufacturing,

Organization, and People) - Anthropotechnology; terdiri atas: physical anthropology/ body dimension, cultural anthropology/ value system, and cognitive anthropology/ cognitive model.

- Macroergonomic Analysis dan Design (MEAD) - TOP – Modeler

1. Lehto, M. R. et al (2008) Introduction and Human Factors and Ergonomics for Engineers.

2. Lewis, G. (2006) Organizational Crisis Management, The Human

Referensi/

Factor. Auerbach Publications

3. Pierre, M., et al (2008) Crisis Management in Acute Care Settings. Human Factors and Team Psychology in a High Stakes

References

Environment.

4. Stanton, N., et al (2005) Handbook of Human Factors and Ergonomics Method. CRC Press.

TI0920XX : Sistem Kesehatan dan Keselamatan Kerja MATA KULIAH/

TI0920XX : Industrial Safety and Health Engineering COURSE TITLE

Credits: 3 Semester: III

Mata kuliah ini bertujuan untuk memberikan pemahaman mengenai standard dan prosedur K3 dalam industri, mengidentifikasi resiko

TUJUAN

kerja, menangani resiko potensial dan merancang langkah

PEMBELAJARAN/

penanggulangan. Mata kuliah ini memberikan kemampuan untuk merancang sebuah sistem K3.

LEARNING

This course is designed to provide students with understanding of

OBJECTIVES standards and prosedures of health and safety environment, work risk identification, how to handle potential risks and preventive actions in dealing with such risks. It builds students’ skills to design a safety management system.

x Kemampuan mengakomodasikan isu lingkungan dan keberlanjutan

KOMPETENSI/

x Perancang sistem x Keterampilan manajerial

COMPETENCY

x Ability to accommodate environmental issues & sustainabilities x System designer x Managerial skills

x Sistem manajemen K3 x Kerugian akibat kecelakaan dan efek domino, bahaya dan

bagaimana mengontrol bahaya, sumber-sumber bahaya. x Keandalan manusia, analisa K3, kajian resiko K3.

x Peringatan dini dan evakuasi

POKOK

x K3 dan system informasi, permodelan dan simulasi K3, K3 dalam

x Safety Management System x Accident Losses and The Domino Effects, Hazards and how to

control, source of hazards. x Human Reliability, Safety Analysis, Safety Risk Assessment

x Early warning system and evacuation x Safety and information system, safety modeling and simulation,

safety in transportation.

PUSTAKA

1. Asfahl, C.Ray. (1999). Industrial Safety and Health Management,

UTAMA/REFERE

fourth edition. Prentice Hall, New Jersey.

2. Hammer, Willie & Price, Dennis. (2001).Occupational Safety Management and Engineering, fifth edition. Prentice Hall, New

NCES

Jersey.

TI0920XX : Manajemen Strategi MATA KULIAH/

TI0920XX : Strategic Management COURSE TITLE

Credits: 3 Semester: II

Mata kuliah memberikan pemahaman mengenai kumpulan gagasan- gagasan dalam manajemen strategi, mengeksplorasi kekuatan dan

kelemahan dari tiap gagasan tersebut, serta memahami model

TUJUAN

terbaru yang diimplementasikan dalam perancangan strategi

PEMBELAJARAN/

korporasi. Mata kuliah ini akan menggali lebih dalam kumpulan gagasan-gagasan yang ada tersebut, termasuk asumsi yang digunakan,

LEARNING

model, kekuatan, kelemahan dan implementasinya. OBJECTIVES The course provides students with understanding of various thoughts in strategic management. It explores the strengths and weaknesses of

each thought, and understand the latest models implemented in corporate strategic design. Through this course, students will learn that school of thought, including base assumptions, models, strengths, weaknesses, and the implementation.

x Keterampilan sintesis, integrasi, dan perancangan

KOMPETENSI/

x Keterampilan manajerial x Ketrampilan memecahkan masalah

COMPETENCY

x Synthesizing, integrating, and designing skills x Managerial skills x Problem solving skills

x Pengantar manajemen strategi, perumusan visi dan misi. x Formulasi strategi: kajian lingkungan eksternal dan internal x Strategi generic, fitting strategy, perencanaan strategis.

POKOK

x Model manajemen strategi saat ini, strategi Blue Ocean.

BAHASAN/

x Implementasi dan evaluasi strategi. x Introduction to strategic management, vision and mission

formulation.

SUBJECTS

x Strategic formulation: external and internal factor evaluation. x Strategy generic, fitting strategy, and strategic planning. x Current models of strategic management, and Blue Ocean

strategy. x Strategy implementation and evaluation.

PUSTAKA

1. Strategic Management: Davids

2. Strategic Management: Thompson

UTAMA/

3. Strategy Safari : Mintzberg

4. Strategy Focus Organization: Kaplan and Norton

REFERENCES

5. The discipline of market leader : Tracy and Wiersema

6. Blue ocean strategy: Chan Kim and Mauborgne

MATA KULIAH/ TI0920XX : Man. Pemasaran dan Customer Relationship COURSE TITLE

TI0920XX : Marketing and Customer Relationship Man.

Credits: 3 Semester: II

Mata kuliah ini mengajarkan tentang proses dasar dalam management pemasaran produk/jasa yang meliputi proses segmentasi, targetting, positioning (STP), konsep mix marketing, strategi harga dan strategi pemasaran produk dalam setiap tahapan siklus hidup maupun untuk pengembangan produk baru. Selain itu, mata kuliah ini membahas tentang konsep bagaimana memuaskan konsumen dan membuat

TUJUAN

program loyalitas dan retensi konsumen dengan strategi CRM yang berbasis konsep “new wave marketing”.

PEMBELAJARAN/

The course provides student with knowledge and understanding basic

LEARNING

process in product/services marketing management in which includes: OBJECTIVES segmentation process, targeting, positioning, mix marketing concepts,

pricing strategy and product marketing strategy in each stage of life cycle for new product development. Also discussed in this course are the concept of how to deliver customers’ satisfaction with customer relationships and marketing strategy of which based on “new wave marketing”.

x Keterampilan sintesis, integrasi, dan perancangan

KOMPETENSI/

x Keterampilan manajerial x Intrapersonal dan kemampuan berkomunikasi

COMPETENCY

x Synthesizing, integrating, and designing skills x Managerial skills x Intrapersonal and communication skills

x Pengantar manajemen pemasaran x Proses segmentasi, targetting, dan penempatan produk (STP), dan

penerjemahan STP dalam strategi mix marketing.

POKOK

x Perilaku konsumen, mengukur kepuasan konsumen.

BAHASAN/

x Pengantar Customer Relations and Marketing (CRM) dan hubungannya dengan ERP

x Dasar-dasar e-mail dan strategi pemasaran berbasis web. x Introduction to marketing management

SUBJECTS

x Segmentation, targeting, and positioning process (STP), and STP

interpretation into mix marketing strategy. x Customer behavior, measuring customer satisfaction x Introduction to CRM and its relationship with ERP

x Basic concepts of e-mail and web marketing strategy.

PUSTAKA

1. Kotler, Phillips (2000). Marketing Management, milenium

UTAMA/

edition, PHI.

2. Al Ries, Jack Trout (1989). Bottom-Up Marketing, Mc. Graw Hill

REFERENCES

International Editions marketing Series.

TI0920XX : Manajemen Performansi MATA KULIAH/

TI0920XX : Performance Management COURSE TITLE

Credits: 2 Semester: III

Mata kuliah ini memberikan pemahaman mengenai konsep-konsep

TUJUAN

sistem manajemen pengukuran kinerja. Mata kuliah ini juga membangun kemampuan mahasiswa dalam perancangan sistem

PEMBELAJARAN/

pengukuran kinerja terintegrasi yang seharusnya tidak hanya mempertimbangkan aspek finansial saja, tetapi juga aspek-aspek non

finansial seperti kualitas, inovasi, konsumen, dan keandalan operasional, yang dipercaya juga turut meningkatkan profitabilitas,

market share, dan operasi yang efektif dalam suatu perusahaan. This course enables students to understand the concepts of

performance management system. It builds students’ skills in

LEARNING

designing integrated performance measurement system, that should consider not only financial aspects, but also non financial aspects such

OBJECTIVES as quality, innovation, customers, and operations reliability. Those aspects are believed, to support the increase of profitability, market

share, and effective operation of a company.

KOMPETENSI/

x Ketrampilan Sintesis, integrasi, dan perancangan x Perancang sistem x Keterampilan manajerial

x Synthesizing, integrating, and designing skills

COMPETENCY

x System designer x Managerial skills

x Pengantar manajemen performansi Konsep manajemen performansi dan model-model pengukuran

x kinerja

POKOK

BAHASAN/

x Konsolidasi indikator kinerja, integrasi sistem pengukuran kinerja perusahaan dan sistem pengukuran kinerja karyawan. x Penetapan target, dan perangkat lunak performance

management. x Sistem pengukuran kinerja untuk organisasi non profit, sistem

pengukuran kinerja untuk rantai pasok, dan sistem pengukuran pengukuran kinerja untuk rantai pasok, dan sistem pengukuran

SUBJECTS

x Introduction to performance management. x Performance management concepts and performance

measurement models. x Work indicator measurement, integrating corporate performance

measurement and employee performance measurement. x Target setting, and performance management software.

x Performance measurement system for non-profit organization, performance measurement system for supply chain, and

performance meaurement system for industrial cluster.

PUSTAKA UTAMA/

1. Balanced Scorecard : Kaplan and Norton

2. Strategic Focused Organization : Thompson

REFERENCES

3. Performance Measurement Questionnaire: Nanni et al

TI0920XX : Financial Engineering MATA KULIAH/

TI0920XX : Financial Engineering COURSE TITLE

Credits: 3 Semester: III

Financial engineering merupakan multidisiplin yang mencakup teori

TUJUAN

finansial, metode-metode engineering, matematika, dan praktek pemrograman komputer. Mata kuliah ini dirancang sebagai

PEMBELAJARAN/

pengenalan terhadap teori financial engineering dan aplikasinya yang berfokus pada prinsip-prinsip keuangan korporasi dan ilmu investasi

seperti cash flow stream, risk aversion, pricing of firms dan instrumen- instrumen keuangan, interest rate term structure, fixed income

instruments duration, bond portfolio immunization, dan teori portfolio the Markowitz mean variance.

Financial engineering is a multidisciplinary field involving financial theory, the methods of engineering, the tools of mathematics, and the

practice of programming. The course aims to introduce the theory of

LEARNING

financial engineering and its applications which focus on the principles

OBJECTIVES

of corporate finance and investment science such as cash flow stream, risk aversion, pricing of the firms and finance instruments, interest rate term structure, fixed income instruments duration, bond portfolio immunization, and the Markowitz mean-variance portofolio theory.

KOMPETENSI/

x Ketrampilan sintesis, integrasi, dan perancangan x Perancang sistem

x Keterampilan manajerial

COMPETENCY

x Synthesizing, integrating, and designing skills x System designer x Managerial skills

x Keuangan dan financial engineering x Investasi dan sumber pendanaan, prinsip bunga, nilai saat ini dan

nilai masa depan stream, internal rate of return, cost of capital, dan teknik dasar membangun model finansial.

x Aplikasi: capital budgeting, optimal portfolios, dynamic cash flow processes, optimal management, the harmony theorem,

POKOK

evaluation of a firm.

BAHASAN/

x Pengembalian aset, variable random, pengembalian random, portfolio rataan dan variansi, the feasible set, model Markowitz, the two fund theorem, inclusion of risk free asset, the one-fund

theorem x Model capital asset pricing.

x Finance and financial engineering x Investment and funding sources, the principle of interest, present

and future value of streams, internal rate of return, cost of capital, and the basic techniques to build financial model.

x Application: capital budgeting, optimal portfolios, dynamic cash flow processes, optimal management, the harmony theorem,

SUBJECTS

evaluation of a firm. x Asset returns, random variables, random returns, mean and

variance portfolio, the feasible set, the Markowitz model, the two fund theorem, inclusion of risk free asset, and the one-fund theorem

x Capital asset pricing model.

1. Beamont, P. H. (2004). Financial Engineering Principles. New Jersey, John Wiley & Sons.

PUSTAKA

2. Brealey, R. A., S. C. Myers, et al. (2008). Corporate Finance. New

UTAMA/

York, Mc Graw Hill Book Publisher.

3. Gunarta, I. K. (2008). Financial Modelling dengan Menggunakan

REFERENCES

Excel dan Crystal Ball. Surabaya, Jurusan Teknik Industri.

4. Gunarta, I. K. (2008). Financial Model: Panduan untuk Membangun dan Mengintepretasikan Laporan Keuangan.

Surabaya, Jurusan Teknik Industri ITS.

TI0920XX : Sustainable Manufacturing MATA KULIAH/

TI0920XX : Sustainable Manufacturing COURSE TITLE

Credits: 3 Semester: II

Mata kuliah ini didesain untuk memberikan pemahaman kepada mahasiswa mengenai isu-isu sustainabilty, konsep dan ruang lingkup dari Sustainable Manufacturing (SM), strategi-strategi dalam SM, dan

TUJUAN

alat-alat yang biasa digunakan dalam SM. Saat ini, mengintegrasikan

PEMBELAJARAN/

sustainability ke dalam bisnis proses akan manambah total kinerja bisnis dan daya saing. Ketrampilan dan pengetahuan yang diperoleh dari mata kuliah ini akan mempersiapkan mahasiswa untuk menjadi sarjana teknik yang sadar lingkungan dan peka terhadap permasalahan lingkungan serta mampu memecahkan masalah- masalah tersebut dan meningkatkan kinerja industri.

This course is designed to provide students with an understanding of sustainability issues, the concepts and the scope of SM, the strategies

in SM, the management approaches in SM, and tools commonly used in SM. In the current situation, integrating sustainability into business

LEARNING

process will enhance business’s total performance and OBJECTIVES competitiveness. Skills developed and knowledge acquired from this course will prepare students to be environmentally conscious engineers who are sensitive to environmentally related problems and capable to solve those problems and enhance total performance of industries.

x Kemampuan mengakomodasikan isu lingkungan dan

KOMPETENSI/

keberlanjutan x Perancang sistem

x Keterampilan manajerial

COMPETENCY

x Ability to accommodate environmental issues & sustainabilities x System designer x Managerial skills

x Pengantar Sustainability, global warming dan permasalahan lingkungan lainnya, isu-isu sustainability makro

POKOK

x Konsep-konsep Sustainable Manufacturing, ruang lingkup,

BAHASAN/

strategi dan regulasi yang berhubungan dengan Sustainable Manufacturing.

x Life Cycle Management (LCM), Life Cycle Engineering (LCE): Desain untuk Lingkungan, Desain untuk Manufaktur, dan Desain untuk Perakitan.

x Life Cycle Assessment (LCA), and Life Cycle Costing (LCC), Product

Data Management (PDM, Technical Support x Upgrading, penggunaan ulang, manufaktur ulang, dan daur ulang.

x Introduction to Sustainability, global warming & other environmental problems, macro sustainability issues.

x Concepts of sustainable manufacturing, scope of sustainable manufacturing, strategies of sustainable manufacturing,

SUBJECTS

regulations related to sustainable manufacturing. x Life Cycle Management (LCM), Life Cycle Engineering (LCE): Design

for Environment, Design for Manufacturing, and Design for Assembly.

x Life Cycle Assessment (LCA), and Life Cycle Costing (LCC), Product

Data Management (PDM, Technical Support x Upgrading, Reuse, Remanufacturing, Recycling.

1. Billatos, S.B. and Basaly, N.A. (1997) Green Technology and Design for the Environment, Taylor & Francis

2. Curran, M.A. (1996) Environmental Life-Cycle Assessment,

PUSTAKA

McGraw-Hill

3. Fiksel, J. (1997) Design for Environment – Creating Eco – Efficient Products andProcesses, McGraw Hill

UTAMA/

4. Hines, P. and Taylor, D. (2000) Going Lean, Lean Enterprise Research Centre, UK.

REFERENCES

5. Steinhilper, R. (1998) Remanufacturing: The Ultimate Form of Recycling, Fraunhofer IRB Verlag, Stuttgart

6. Proceeding of CIRP International Seminar on Life Cycle Engineering, 1994 – 2008

TI0920XX : Permodelan Sistem Optimasi

MATA KULIAH/

TI0920XX :Optimization System Modeling

COURSE TITLE

Credits: 3 Semester: II

TUJUAN

Tujuan dari mata kuliah ini adalah memberikan pemahaman teknik- PEMBELAJARAN/ teknik metaheuristic untuk menyelesaikan masalah optimasi.

Learning

The course aims to provide students with understanding

Objectives

metaheuristics techniques to solve optimization problems.

x Keterampilan memecahkan masalah x Keterampilan memanfaatkan teknologi informasi

KOMPETENSI/

x Ketrampilan analisis

Competencies

x Problem solving skills x Proficiency in ICT x Analytical skills

Pokok Bahasan/

x Pendahuluan metaheuristic x Pendahuluan metaheuristic

algorithm dan aplikasi-aplikasinya.

Subject

x Introduction to Metaheuristics x Metaheuristics: Genetic Algorithm, Simulated Annealing, Tabu

Search, Particle Swarm, Ant Colony Optimization, Harmony Search algorithm and their applications.

1. J. Dreo A. Petrowski,P. Siarry E. Taillard,Metaheuristics for Hard Optimization, Methods and Case Studies, springer

Referensi/

2. Karl F. Doerne,Metaheuristics Progress in Complex Systems

References

optimization, springer.

3. Fred Glover, Gary A. Kochenberger, HANDBOOK OF METAHEURISTICS, Kluwer

TI0920XX : Sistem Dinamik MATA KULIAH/

TI0920XX : Dinamic System COURSE TITLE

Credits: 3 Semester: II

Memberikan perspektif pendekatan metodologi Sistem Dinamik dalam memecahkan permasalahan sistem yang kompeks, membangun

kemampuan memodelkan permasalahan-permasalahan kompleks, mensimulasikan model, memvalidasi model, menganalisa dan

TUJUAN

membuat skenario kebijakan yang sesuai dengan tujuan system. Mata PEMBELAJARAN/ kuliah ini juga memberikan kemampuan untuk melihat sebuah permasalahan secara menyeluruh sehingga dapat melahirkan kebijakan-kebijakan dalam melakukan penyikapan atas permasalahan kompleks tersebut.

To give an overview of Dynamic System approach methods in solving system complex problems, to develop students’ ability to model complex problems, simulate the models, validate the models, to

Learning

analyze and to develop improvement scenarios related to the system

Objectives

purpose. It also provides students with practices on how to view a problem comprehensively in taking actions regarding the complex problem.

KOMPETENSI/

x Keterampilan memecahkan masalah x Perancang Sistem

Competencies

x Ketrampilan Sintesis, integrasi, dan perancangan x Ketrampilan Sintesis, integrasi, dan perancangan

Pokok Bahasan/

x Konsep dasar metodologi Sistem Dinamik: pengenalan dalam berpikir sistem dan proses permodelannya, struktur dan perilaku

sistem dinamik. x Batasan sistem, diagram sebab akibat: struktur dan perilaku dalam

sistem umpan balik positif-negatif tunggal, struktur dan perilaku dalam umpan balik positif-negatif jamak.

x Menganalisa masalah-masalah sederhana, pengenalan simulasi: konsep aliran materi dan informasi, persamaan level, persamaan rate, auxiliary, konstanta/parameter dan multiplier.

x Pengenalan konsep delay material dan informasi dalam sistem, konsep pulse dan step, konsep fungsi, konsep smoothing. x Pendekatan sistem dinamik dalam analisa perancangan dan kebijakan x Validasi model sistem dinamik, skenario kebijakan, dan analisa

sensitivitas.

x Basic concepts of Dinamic System methodology: introduction in system thinking and modeling process, structure and dinamic

Subject

system behaviour. x System boundary, causal loop diagram: structure and behaviour in single multiple positive and negative feedback loop. x Simple problems analysis, simulation introductory: material and information flow concepts, level equation, rate equation, auxiliary,

constants/parameters and multiplier. x Introduction to the concept of material and information delay in a system, pulse and step concepts, function concepts, smooting

concepts. x Dinamic system approach in analyzing design and policies.

x Validation of dynamic system models, policies scenario, and sensitivity analysis.

x John D. Sterman : Business Dinamics : Systems Thinking and Modeling for Complex World.

x Leslie A. Martin : Beginner Modeling Exercises, MIT System

Referensi/

Dynamics in Education Project Under the Supervision of Dr. Jay W. Forrester. September 5, 1997

References

x Joseph G. Whelan : Modeling Exercises I, MIT System Dynamics Education Project Under the Supervision of Dr. Jay W. Forrester,

May, 1994 x Joseph G. Whelan revised by Lucia Breierova, Modeling Exercises II,

MIT System Dynamics Education Project Under the Supervision of

Dr. Jay W. Forrester January 13, 1997 x Jay W. Forrester, System Dynamics, Systems Thinking, and Soft OR,

Sloan School of MIT, August 18, 1992. x Bell, J.A., and Senge, P.M. Enhancing refutability. In: Legasto, A.A.

Jr.; Forrester, M.W.; and Lyneis, T.M., eds. System Dynamics . Elsevier North-Holland, 1980

TI0920XX : Data Mining untuk Bisnis MATA KULIAH/

TI0920XX : Data Mining for Business COURSE TITLE

Credits: 3 Semester: III

Membahas teknik-teknik dalam data mining,kasus-kasus di mana data mining bisa diterapkan, mengenalkan pemakaian software untuk

TUJUAN

implementasi. Tujuan mengenalkan teknik-teknik data mining untuk PEMBELAJARAN/ prediksi, klasifikasi dan clustering, penghitungan dan penerapan untuk

bidang perbankan, telekomunikasi dan marketing dengan menggunakan software.

Learning

The course aims to discuss about data mining techniques and cases in which data mining can be applied, as well as to introduce the use of

Objectives

software for data mining application. Data mining techniques provides

a prediction, classification and clustering, which can be applied in banking, telecommunication, and marketing with the help of software.

x Keterampilan memecahkan masalah

KOMPETENSI/

x Keterampilan memanfaatkan teknologi informasi x Ketrampilan Sintesis, integrasi, dan perancangan

x Problem solving skills

Competencies

x Proficiency in ICT x Synthesizing, integrating, and designing skills

Pokok Bahasan/

x Pendahuluan, data preprocessing. x Pengklusteran dan analisis diskriminan. x Neural network, decision tree, support vector machine. x Heuristic dalam data mining

x Kernel data mining.

Subject

x Introduction and data preprocessing x Clustering and discriminants analysis

x Neural network, decision tree, support vector machine. x Heuristics in data mining

x Data mining Kernel x Data mining Kernel

santosa, Graha Ilmu2007

Referensi/

x Data Mining Terapan dengan matlab (budi santosa, 2007), Graha Ilmu x Introduction to Data Mining, Pang-Ning Tan, Michael Steinbach,

Vipin Kumar , Prentice Hall

References

x Advanced data Mining Techniques, David L. Olson Dursun Delen, e-book

x Mastering data Mining, the art and science of CRM (Michael J Berry, Gordon S

TI0920XX : Supply Chain Engineering MATA KULIAH/

TI0920XX : Supply Chain Engineering COURSE TITLE

Credits : 3 Semester: II

Supply chain engineering terkait dengan analisis dan perancangan sistem aliran material dan informasi di sepanjang supply chain untuk

TUJUAN

menciptakan utilitas waktu dan tempat secara efisien. Mata kuliah ini

PEMBELAJARAN/

bertujuan untuk memberikan keterampilan analisis dan perancangan jaringan supply chain pada tingkat menengah sampai lanjut. Supply chain engineering is highly related to the material and

Learning

information flow system and design in a supply chain to efficiently

Objective

utilize time and space. This course aims to form students’ skills in designing and analyzing supply chain network in medium and advanced stages.

KOMPETENSI/

x Keterampilan sintesis, integrasi, dan perancangan x Keterampilan manajerial

x Keterampilan dalam perancangan sistem

x Synthetizing, integrating, and designing skills

Competencies

x Managerial skills x System designer x Managerial skills x System designer

Pokok Bahasan/

x Aspek-aspek strategi dan design dalam supply chain (efficiency vs. responsiveness, postponement, modularity, commonality) x Inventory pooling effect pada perancangan jaringan, manajemen

inventory terintegrasi untuk smooth demand x Manajemen permintaan, pricing/revenue management

x Closed loop supply chain, manajemen suplai, dan contract dalam rantai pasok.

x Introduction to supply chain engineering. x Strategic aspects and designing in supply chain (efficiency vs. Responsiveness, postponement, modularity, commonality).

Subject

x Inventory pooling effects in a network design, integrated inventory management for smooth demand. x Demand management, pricing/revenue management. x Closed loop supply chain, supply management, and contracts in

supply chain.

1. Chopra, S., and Meindl, P. (2007). Supply chain management: Strategy, planning, and operations, 3rd Edition. New Jersey -

2. Simchi-Levi, D., Kaminski, P., and Simchi-Levi, E. (2000). Designing and managing the supply chain: Concept, strategies, and case

studies. Irwin McGraw-Hill.

TI0920XX : Manajemen Material dan Pengadaan MATA KULIAH/

TI0920XX : Procurement and Material Management COURSE TITLE

Credits: 3 Semester: III

Procurement & material Management mencakup materi yang terkait dengan pengadaan material dan manajemen material dari supplier

TUJUAN

sampai dengan di dalam proses produksi. Aktifitas meliputi

PEMBELAJARAN/

perencanaan pengadaan material dan teknik-teknik perencanaan pengadaan. Metode-metode pemilihan dan evaluasi supplier. Tujuan mata kuliah ini adalah untuk memperdalam konsep pengadaan dan manajemen material dan model-model yang terkait dengan masalah tersebut. Dan membahas studi kasus dari journal-journal yang relevan. The course includes the topics related to the material procurement and