4 International Conference on Technical and Vocational Education and Training (TVET) Theme : Technical and Vocational Education and
ISBN : 978-602-1178-11-9 Padang, November 9-11, 2017 Padang, November 9-11, 2017 PROCEEDINGS 4 th
4 International Conference on Technical and Vocational Education and Training (TVET) th International Conference on TVET Theme : Technical and Vocational Education and Training for Sustainable Societies Padang, November 9-1 Pa da ng , N ov em be r 9 1, 2017 -11 , 2
ISBN : 978-602-1178-11-9
01 ISBN : 978-602-1178-11-9
7 th
4 International Conference on Technical and Vocation Education and Training
Padang : November 9-11, 2017
Int. J. of GEOMATE, Month, Year, Vol.00, No.00 (Sl. No. 00), pp. 00-00
FOREWORDS
This proceeding aims to disseminate valuable ideas and issues based on research or literature threview in the field of vocational, technical and engineering studies, which have been presented in 4
International Conference on Technical and Vocation Education and Training. This conference has taken
place in Hospitality Center Universitas Negeri Padang, November 9-11, 2017.The theme of Conference focused on the perspective of technical and vocational education and st
training for sustainable society to face the challenges of 21 century, globalization era, and particularly
Asian Economic Community. To overcome the challenges, we need the innovation and change in human
resources development. Technical vocational educational and training have essential roles to change the
world of education and work in order to establish sustainable society.Undoubtedly, TVET need to enhance the quality of learning by developing various model of
active learning, including learning in the workplace and entrepreneurship. Create innovation and applied
engineering as well as information technology. Improvement of management and leadership in TVET
Institution, and development of vocational and technical teacher education.Many ideas and research findings have been shared and discussed in the seminar, more than 176
papers have been collected and selected through scholars, scientists, technologist, and engineers’. as
well as teachers, professors, and post graduates students who participated in the conference.Eight keynote speakers have taken a part in the conference, namely Prof. Intan Ahmad, Ph.D.
(Director general of learning and student affairs, Kemenristek Dikti) and Prof. Josaphat Tetuko Sri
Sumantyo, Ph.D. (CEReS Chiba University) and Prof. Dr. Maizam Alias (UTHM Malaysia) and Prof.
Ganefri, Ph.D. (Rector of UNP) and Prof. Dr. Ramlee bin Mustapha (UPSI Malaysia) and Prof. Nizwardi
Jalinus, Ed.D. (Chair of TVET doctoral program, FT UNP) and Prof. Michael Koh, Ph.D. Dr. Fahmi
Rizal, M.Pd., MT (Dean of FT UNP). They all have a great contribution for the success of the
conference. th Finally, thank a million for all participants of the conference who supported the success of 4
International conference on TVET 2017 and most importantly, our gratitude to all scholars who support
and tolerated our mistake during the conference.Padang, 9 November 2017 Prof. Dr. Nizwardi Jalinus, M.Ed Chair of Scientific Committee
No Author Article
DECISION SUPPORT SYSTEM (DSS) WITH WP AND MFEP METHODS IN SELECTION OF BEST BABY CLOTHES
VOCATIONAL HIGH SCHOOL 1 PADANG Hastuti Marlina, Reno Renaldi Fivia Eliza, Dwiprima Elvanny Myor, Hastuti
IN MAKING PRODUCT WITH CNC MILLING MACHINE IN
THE EFFECT OF SOFTWARE MASTERCAME TOWARD MECHANICAL ENGINEERING STUDENTS PERFORMANCE
VOCATIONAL HIGH SCHOOL 1 PADANG Kms. Muhammad. Avrieldi, Suparno, Nofri Helmi
THE INFLUENCE OF PROJECT BASED LEARNING TOWARD ELECTRICAL MACHINE AND ENERGY CONVERSION STUDENT ACHIEVEMENT OF
14 THE EFFECTIVENESS OF USING POSTER AND VIDEO MEDIA IN EDUCATION ABOUT DANGERS OF SMOKING ON KNOWLEDGE AND ATTITUDES OF SENIOR HIGH SCHOOL 12 PEKANBARU STUDENTS Nurzamaliah Afifah, Ambiyar, Yufrizal. A
13
12
8
DAFTAR ISI PROSIDING 4th ICTVET UNP 2017
OPTIMIZE OF LEAST-SQUARE INVERSE CONSTRAIN METHOD OF GEOELECTRICAL RESISTIVITY WENNER- SCHLUMBERGER FOR INVESTIGATION ROCK STRUCTURES IN MALALAK DISTRICTS OF AGAM WEST SUMATRA
11 Akmam, Amir Harman, Putra, Amali, Resi Elfitri
10 Arif Rahman Hakim MODIFICATION OF INPUT PUSHER ASSEMBLY OF LASER MARKING MACHINE
9 Asyahri Hadi Nasyuha, Rahmat Sulaiman Naibaho, Saniman
1 Asrul Huda, Rendy Harisca DEVELOPMENT OF EMPLOYEE INFORMATION SYSTEM- BASED WEB IN MAN 1 PADANG
INJECTION TIME OF FUEL AND GAS EMISSION OF GASOLINE ENGINE
EFFECT OF ENGINE TEMPERATURE CHANGES ON
7 Toto Sugiarto, Dwi Sudarno Putra, Wawan Purwanto
THE DESIGN OF THE SIGNAL MEASUREMENT DEVICE OF BODY’S BIOELECTRICAL IMPEDANCE By USING THREE ELECTRODES
6 Juli Sardi, Hastuti, Ali Basrah Pulungan
IMPLEMENTATION PROBLEM SOLVING LEARNING STRATEGY
IMPROVING LEARNING MOTIVATION THROUGH
5 Budi Syahri, Primawati, Syahrial
INNOVATION INSTRUCTIONAL
4 Eko Indrawan REVIEW DEVELOPING OF PROJECT BASED AS
3 Harleni ACADEMIC INFORMATION SYSTEM OF STIKES PERINTIS PADANG
TWO SPECIES OF TERMITE DAMAGING TO BUILDING AND HOUSES AT BANDA ACEH (SUMATRA, INDONESIA)
2 S Syaukani, M Bahi, M Muslim, M Shabri Abd Majid, D Sutekad, Y Yasmin, N Novita
THE VALIDITY OF TRAINERON MATERIALS SCIENCE AND DEVICESSUBJECTAT DEPARTMENT OF ELECTRICAL ENGINEERING
18 Tri Monarita Johan FUNCTIONAL MEMBERSHIP ANALYSIS OF FUZZY
Yasep Setiawan RELATIONDRAG FORCE REDUCTION ON CIRCULAR CYLINDER USING CIRCULAR DISTURBANCE BODY WITH TURBULENCE INTENSITY
THE ROLE OF INFORMATION TECHNOLOGY IN THE
EFFECT OF GASOLINE ADDITIVE MATERIALS ON ENGINE PERFORMANCE Muhammad Luthfi Hamzah, Hamzah, Astri Ayu Purwati
EVALUATION OF LEARNING PROCESS USING CIPP MODEL Remon Lapisa, Dwi Sudarno Putra, Ahmad Arif, Syafmi Algifari Abda’u
IMPLEMENTATION OF CONTEXTUAL TEACHING AND LEARNING ON ANALYZING ELECTRICAL CIRCUITS SUBJECT Dwi Sudarno Putra, Misra Dandi Utama, Dedi Setiawan, Remon Lapisa, Ambiyar
26 SIMPLE WATER PURIFIER USING MULTILEVEL SYSTEM Dwiprima Elvanny Myori, Citra Dewi, Erita Astrid, Ilham Juliwardi Jasman, Nelvi Erizon, Syahrul, Junil Adri, Bulkia Rahim Hendri Nurdin, Hasanuddin, Waskito, Refdinal, Darmawi
25
24
23
22
A MICRO HYDROPOWER GENERATOR AS AN ALTERNATIVE SOLUTION FOR ENERGY PROBLEM SOLVING IN INDONESIAN REMOTE AREA Nuzul Hidayat, Ahmad Arif, M.
INFERENCE SYSTEM SUGENO IN ANEMIA CLASSIFICATION
Sukardi, M.Giatman, Remon Lapisa, Purwantono, Refdinal
INTERACTIVE MULTIMEDIA PROGRAM WITH PROBLEM- BASED LEARNING METHOD TO IMPROVE LEARNING OUTCOMES INBIOLOGY SUBJECT
21 Nur Hidayati, Muhammad Ridha Ridwan
17
16
15
NEED ANALYSIS APPLICATION ON THE FEASIBILITY STUDY OF THE HYDROELECTRIC POWER SELECTION (CASE IN SOLOK, PESISIR SELATAN AND SIJUNJUNG REGENCY)
20 Suryadimal, Edi Septe,Wenny Martiana, Fahmi Rizal, Nizwardi Jalinus
INDUSTRIAL FIELD PRACTICE (IFP) (Case Study: Competency Compliance)
19 Henny Yustisia CURRICULUM ANALYSIS OF PREREQUISITE COURSE AT
IMPROVEMENT OF TEACHER’S COMPETENCIES AND TEACHING LEARNING PROCESS EFFECTIVENESS IN ESA SEJAHTERA SCHOOL PEKANBARU ASSESSMENT OF PRODUCT PROTOTYPE EXISTENCE AS A MEDIA OF LEARNING TO ACCELERATE THE TRANSFER OF TECHNOLOGY AND DIVERSIFICATION IN RURAL INDUSTRIES
31 Almasri EFFECT OF MIND MAPPING LEARNING METHODS ON LEARNING OUTCOMES
MULTICULTURAL EDUCATION Raimon Kopa, Afdhal Husnuzan, Bambang Heriyadi
THE DESIGN OF LECTURER PERFORMANCE EVALUATION MODEL BASED ON ANALYTIC NETWORK PROCESS (ANP)
Fenny Purwani, Nizwardi Jalinus, Ambiyar
DEVELOPMENT OF MODEL OF PROPELLER-CROSS FLOW WATER TURBINE FOR PICO HYDRO POWER GENERATORTITLE AN EXPERIMENTAL STUDY ON THE EFFECT OF CENTRIFUGAL CLUCTH COOLING GROOVE ON MOTORCYLCE PERFOMANCE
Purwantono, Refdinal, Hendri, Syahrul
Ulfa Annida Damanik, Sri Wening PSYCHOLOGICAL FACTORS INFLUENCING THE DECISION MAKING OF PURCHASING PRODUCTS VIA ONLINE
VOCATIONAL SCHOOLS BY CAPACITY BUILDING AND WORKSHOP ABOUT PREPARING LOCAL GOVERNMENT FINANCIAL STATEMENT; AN EXPERIMENTAL STUDY ON ACCOUNTING TEACHERS’ FROM VOCATIONAL SCHOOLS IN WEST SUMATERA PROVINCE
IMPROVING TEACHERS’ PROFESIONALISM APPROPRIATE TO NEW CURRIRULUM 2017 FOR
Vita Fitria Sari, Mayar Afriyenti, Mia Angelina Setiawan
DEVELOPMENT OF PRODUCT PROMOTION APPLICATIONS MICRO SMALL AND MEDIUM ENTERPRISES (SMEs) BUKITTINGGI CITY
EFFECT OF EGRICS INJECTION DURATION ON EMISSION DIESEL ENGINE Rahmatul Husna Arsyah, Ulya Ilhami Arsyah, Nizwardi Jalinus, Azwar Inra
ANALYSING INFORMATION SYSTEM OF ACADEMIC SERVICES IN THE UNIVERSITY Muh. Barid Nizarudin Wajdi, Achmad Fathoni Rodli Lika Jafnihirda, Yuliawati Yunus, Nizwardi Jalinus, Azwar Inra Wagino, Toto Sugiarto, Dori Yuvenda, Ahmad Arif
CELL ROTATION TO RESOLVE THE WEAKEST CELL DAMAGE IN THE BATTERY PACK IN DISCHARGING PROCESS Wahyu Prima, Ganefri, Krismadinata
BLASTING DESIGN DEVELOPMENT AREA DECLINE CIBITUNG AND CIKONENG UNDERGROUND MINE PT CIBALIUNG SUMBERDAYA BANTEN Irwanto Zarma Putra, Citra Dewi
RAHMATAN LIL ALAMIN , THE CONCEPT OF
32 Emy Leonita, Nopriadi, Ahmad Satria Efendi, and Niswardi Jalinus
29 MEDIA DEVELOPMENT OF PRODUCT PROMOTION AND STUDENTS STUDENT SMK NEGERI 8 PADANG CITY WEB- BASED
28
27
40
39
38
37
36
35
34
33
30
NEEDS ANALYSIS ON INCREASING COMPETENCY TEST RESULTSSTUDENTS IN S1 PROGRAM OF PUBLIC HEALTH SCIENCESSTIKES HANG TUAH PEKANBARU
Remon Lapisa, Hendika Syahputra, Irma Yulia Basri, Rifdarmon, Hendra Dani Saputra
48 Muh. Barid Nizarudin Wajdi, Andi Mursidi
42
FACTORS EFFECTING ELEMENTARY SCHOOL TEACHER READINESS ON IMPLEMENTING CURRICULUM IN WEST SUMATERA
IMPLEMENTATION OF BASIC TECHNOLOGY EDUCATION MODEL OF TEACHING IN WEST SUMATERA YUNIOR SECONDARY SCHOOL Zuryanty, Hamimah, Mulyani Zein
DEVELOPMENT PROBLEM BASED LEARNING MODEL USING VIRTUAL ENVIRONMENT FOR ENTREPRENEURSHIP COURSES Rasinov Chandra, Donny Fernandez, Erzeddin Alwi
VISUALIZATION APPROACH Hasan Maksum, Aslimeri, Putra Jaya, Wanda Afnison Roni Sanjaya, Muhammad Hasmil Adiya, Gusrianty
IDENTIFICATION SYSTEM (AIS) DATA BY INTERACTIVE
PAIR (PULSED SECONDARY AIR INJECTION) EFFECTS TO EXHAUST GAS EMISSION
Rasinov Chandra, M.Nasir, Reza Rahmadani, Mawardi
FACTORS AFFECTING THE AUTOMOTIVE ENGINEERING STUDENTS’ INTEREST ON TEACHING PROFESSION
Rasinov Chandra, Anggi Aprianto, Mawardi, Reza Rahmadani
EFFECTIVENESS OF INTERACTIVE INSTRUCTIONAL MEDIA ON ELECTRICAL CIRCUITS COURSE: THE EFFECTS ON STUDENTS COGNITIVE ABILITIES
43 DEVELOPMENT OF ONLINE EXAMINATION SYSTEM USING WONDERSHARE QUIZCREATOR BASED ON WEB DESIGN OF ELECTROMAGNETIC REGENERATIVE SHOCK ABSORBER AS A TOOL OF HARVESTING VIBRATION ENERGY ON VEHICLE Fitri Yanti, Rijal Abdullah, Krismadinata Doni Tri Putra Yanto, Sukardi, Deno Puyada
41
LESSON STUDY FOR IMPROVING A LEARNING QUALITY
52
50
Saputra, Ardian Budi Kusuma Atmaja, Wenang Anurogo
46
45
44
47 Mir’atul Khusna Mufida, Hendra
54 Z Mawardi Effendi, Hansi Effendi and Hastria Effendi ACCESSIBILITY AND ACCEPTABILITY OF THE BMI MODEL AT INSTITUTE OF TEACHER TRAINING AND
53 Hansi Effendi, Yeka Hendriyani THE DEVELOMENT OF INTERACTIVE BLENDED PROBLEM BASED LEARNING MODEL FOR PROGRAMMING SUBJECT
51 Vitriani THE DEVELOPMENT OF VIT (VOCATIONAL INTEREST TEST) MODEL USING DECISION SUPPORT SYSTEM (DSS) TECHNIQUE
INVESTIGATION OF CHEMICAL FEASIBILITY AND DISTRIBUTION OF IRON SAND RESERVE REGIONAL AREA OF AGAM DISTRICT FOR CEMENT RAW MATERIAL IN PT. SEMEN PADANG
49 Heri Prabowo, Sumarya
57 Edi Septe, Suryadimal, Wenny Marthiana, Nizwardi Jalinus, Ramli
66
VOCATIONAL STUDENTS BRACING CROSS SECTION EFFECT TO DISSIPATION ENERGY BY NUMERICAL ANALYSIS EARTHQUAKE AND TSUNAMI DISASTER MITIGATION TRAINING FOR ELEMENTARY SCHOOL STUDENTS IN THE COASTAL AREA OF PADANG PARIAMAN DISTRICT WITH KYOTO INTERNATIONAL DISASTER PREVENTATION SCHOOL METHOD PACK CARBURIZATION OF MILD STEEL, USING SHELL AS CARBURIZER TO TEST HARDNESS
VOCATIONAL HIGH SCHOOL DESIGN OF SKILLASSESMENTIN COMPUTER NUMERICAL CONTROL PROGRAMMING SUBJECT ANALYSIS OF LEARNING COMPETENCY ENGINEERING STUDENTS VOCATION D 3 FT UNP USE OF PRODUCTS-BASED MODULE IN THE PROCESS OF LEARNING TO THE PRACTICAL COURSE LEARNING MODEL REQUIREMENTS IN VOCATIONAL TRAINING OF WELDING INSPECTOR BASED ON QUALITY FUNCTION DEPLOYMENT APPLICATION OF LEARNING BASED PRODUCTS IN ORDER TO GROW INTEREST IN ENTREPRENEURSHIP OF
INSTRUCTIONAL MEDIA BASED ANDROID AT
NEEDS ASSESSMENT ON DEVELOPMENT OF
60 Sukardi, Deno Puyada, Rizky Ema Wulansari, Mahesi Agni Zaus
59
56 Ambiyar Febri Prasetya Yufrizal
55
67 Irma Yulia Basri, Delsina Faiza, Remon Lapisa, Nasrun Prima Zola, Rahmat, Fitra Rifwan Totoh Andoyono, Fitra Rifwan, Revian Bodi, Prima Zola, Annisa Prita
65
CONDUCTING LABOR MARKET ASSESSMENT IN ENGINEERING CURRICULUM DEVELOPMENT
63
61
Ramli, Febri Prasetya, Silvia Martiveri Elida, Agusti Efi Abdullah Merjani, Yunesman
THE DEVELOPMENT OF INTERACTIVE MULTIMEDIA- BASED LEARNING MEDIA USING ADOBE FLASH CS3 AND CAMTASIA IN PROBLEM-SOLVING LEARNING IN ELEMENTARY MATHEMATICS OF IN STUDENT PGSD STKIP ADZKIA IN PADANG
68 Ika Parma Dewi, Lativa Mursida, Yani Rizkayeni Marta
INTEREST AT COLLEGE EDUCATION
64 Alvia Wesnita DEVELOPMENT OF ENTREPRENEURIAL LEARNING MODEL TO INCREASE STUDENTS ENTREPRENEURS'
DESIGNING STRATEGY MAPS FOR PRIVATE ENGINEERING COLLEGE
62 Nanang Alamsyah, Larisang, Muhammad Ansyar Bora
58 Safril, Dedi Wardianto ANALYZING OF TECHNICAL CUTTING OF EMPTY PALM BUNCHES
Waskito, Zonny Amanda Putra, Surfa Yondri, Rahmat Aziz Nabawi, Viky Prasetio Wahyudi
Rizky Indra Utama, Nurhasan DEVELOPMENT OF INTERACTIVE MULTIMEDIA CD OF
69 Syah, Rijal Abdullah
INSTRUCTIONAL MEDIA ON BUILDING CONSTRUCTION Yuwalitas Gusmareta, Nurhasan
IMPLEMENTATION OF DISASTER PREPARED SCHOOL
70 Syah, Laras Andreas Oktavia, (SSB) IN WEST PASAMAN DISTRICT WEST SUMATERA Rizky Indra Utama, Muvi Yandra PROVINCE
USING MOBILE TELECOMMUNICATIONS -2000 Zulham Sitorus, Ganefri, Nizwardi
71 INTERNATIONAL FOR ANALYZING TECHNOLOGY Jalinus
NETWORK ERA 4G-LTE THE VALIDITY OF MOBILE LEARNING MANAGEMENT
72 Faiza Rini, Mahesi Agni Zaus SYSTEM (M-LMS) AT UNIVERSITY
Zulfi Azhar, Rolly Yesputra, Eva DECISION SUPPORT SYSTEM IN SELECTING THE
73 Yuni Handayani SCHOLARSHIP RECIPIENTS WITH SAW METHOD Muhammad Fakhriza, Kasman DECISION SUPPORT SYSTEM PROVIDING FUNDS FOR
74 Rukun, Nazaruddin Nasution UNDERPRIVILEGED STUDENTS Muhammad Sabir Ramadhan, Neni
IMPLEMENTATION OF PROJECT BASED LEARNING
75 Mulyani, Muhammad Amin MODEL IN COURSE WEB DESIGN
IMPACT OF WORK-BASED LEARNING OF CONCRETE
76 Syafiatun Siregar STONE WORK PRACTICE ON DIPLOMA-III CIVIL ENGINEERING STUDENTS ANALYSIS OF VOLUME AND STRONG CONCRETE
77 Nurmaidah
IMPROVEMENT ON NON-SAND CONCRETE MIXED WITH ADDITION BAKING POWDER FLAT JACK EQUIPMENT DEVELOPMENT
M. Giatman, Murad, Refki Adinata,
78 MEASUREMENT OF STONE ON STEAM AND WALLS Thamrin
SETTLED UNDER MINE DEVELOPMENT OF MECHANICAL TECHNOLOGY M. Giatman, Waskito, Maruli
79 LEARNING MODULE PROGRAM EXPERTISE OF SMK Sihombing
ENGINEERING
VIRTUAL LAB IMPLEMENTATION QOS METAROUTER
80 Raimon Efendi ON COMPUTER NETWORK LEARNING
IMPROVEMENT OF CONCRETE QUALITY WITH
81 Iskandar G.Rani, Widya Salmita ADDITION OF SUNUA PASIR PADANG PARIAMAN WEST SUMATRA THE CONTRIBUTIONS OF DISCIPLINE AND ENVIRONMENTAL KNOWLEDGE ON CLEAN BEHAVIOR
82 Nurhasan Syah, Sanny Edinov OF STUDENTS IN PUBLIC ELEMENTARY SCHOOL KAMPUNG BARU PARIAMAN, WEST SUMATERA FACTORS AFFECTING STUDENTS IN CHOOSING
83 Zulkifli, Dilson, Rahmad Al Rian COMPUTER ENGINEERING DEPARTMENT IN STT PAYAKUMBUH
84 Arina Luthfini Lubis, Ririt Dwiputri Permatasari and M.
86
INTEGRATED ISLAMIC ELEMENTATY SCHOOL OF LAN TABUR PAGARALAM CITY DECISION SUPPORT SYSTEM FOR RECOMENDATION CERTIFICATION TEACHER ON VOCATIONAL HIGH SCHOOL CONTEXTUAL TEACHING AND LEARNING (CTL) MODEL DEVELOPMENT IN APPLIED PHYSICS THE PROFESSIONALISM OF VOCATIONAL HIGH SCHOOL SUPERVISORS IN THE IMPLEMENTATION OF ACADEMIC SUPERVISION ON THE OFFICE OF EDUCATION PADANG A INTELLIGENCE-COMPUTER ASSISTED INSTRUCTION MODEL BASEDON PROJECTS AND BLENDED LEARNING (PJ2BL) ON CRYPTOGRAPHY TECHNIQUES
96 A VISUAL APPROACH - SINGLE LINKAGETECHNIQUES FOR CLUSTERING OF PALM SEEDS DATA SECURITY OF MEDICAL RECORD WITH RIVEST SHAMIR ADLEMAN (RSA) METHOD A MODEL PREVENTIVE MAINTENANCE CONTROL IN THE MACHINE TURNING AT WORKSHOP THE FACULTY OF ENGINEERING OF THE STATE UNIVERSITY IN PADANG DESIGN OF ANDROID BASED INTERACTIVE BOOK IN
95
94
93
92
91
87
Khairul, Rahmad Budi Utomo Yadi, Efan, Sigit Candra Setya
Ropianto ANALYSIS OF THE DECREASE IN THE NUMBER OF STUDENTS MAJORING COMMERCE DEPARTMENT (STUDY CASE: SMK IBNU SINA BATAM)
97 Suherman GAME BASED LEARNING TO IMPROVMENT TEACHERS KNOWLEDGE FOR TEACHING STRATEGY IN THE CLASS
GROUP INVESTIGATION (GI) LEARNING MODEL ON THE SUBJECT OF UNDERSTANDING THE BASIC ELECTRONICS
90 Fivia Eliza, Hamdani, Rahmat Hidayat, Erita Astrid, Panji
DESIGN OF WASTE SEPARATOR MACHINE: USING WATER PRESSURE AND DIFFERENCE WEIGHT TYPE WASTE WATER
89 Syahril, Rahmat Azis Nabawi, Purwantono, Refdinal, Irzal, Nofri Helmi
A NEW MODEL MOBILE LEARNING MANAGEMENT SYSTEM BASED ON MOODLE IN UNIVERSITY
88 Lita Sari Muchlis, Kasman Rukun, Krismadinata, Yahfizham
DEVELOPMENT OF INSTRUCTIONAL MODULE OF CNC PROGRAMMING THEORY
85 Eko supriadi, Syahril Syahril, Anni Faridah, Syaiful Islami
Hefri Hamid, Nizwardi Jalinus, Syahril, Ambiyar, Febri Prasetya M.Syaifuddin, Ahmad Fitri Boy, Ali Ikhwan Dicky Nofriansyah, Ganefri, Ridwan Haryadi, Yussa Ananda, Dicky Nofriansyah Elfi Tasrif, Husaini Usman, Kasman Rukun Fadhilah, Z. Mawardi Effendi, Ridwan
EFFECT OF PROJECT BASED LEARNING MODEL IN
98 Erwinsyah Simanungkalit
IMPROVING STUDENT LEARNING RESULT PRODUCT DESIGN INTERACTIVE MULTIMEDIA BASED LEARNING FOR THE INTRODUCTION OF COLORS,
99 Ismael, Rian Farta Wijaya LETTERS, NUMBERS, SHAPES, PUZZLE AND QUIS GAMES
Solly Aryza, Hermansyah, A NOVELTY OF QUALITY FERTILIZER DRYER BASED ON 100 Muhammad Irwanto, Zulkarnain SOLAR CELL AND ANN Lubis, Ali Ikhwan
SIMULATION OF MERCURY TRANSPORT FROM GOLD 101 Yaumal Arbi, Eka R. Aidha MINING ACTIVITIES IN PELAWAN RIVER, SAROLANGUN THE MODELING OF MASSIVE LIMESTONE USING
Dedi Yulhendra, Yoszi Mingsi 102
INDICATOR KRIGING METHOD (CASE STUDIES OF Anaperta
MASSIVE LIMESTONE IN PT SINAR ASIA FORTUNA) DEVELOPMENT OF MEDIA TRAINER MOTOR CONTROL
Aswardi, Oriza Chandra, Hendri, FAULT SIMULATION FOR ELECTROMAGNETIC 103
Ali Akmal Zoni CONTROL SYSTEM COURSE AT SMK NEGERI 1 PADANG APPLICATION OF WORK-BASED LEARNING
Murad, Raimon Kopa, Dedy 104 SPSGBLASTING TECHNIQUE, MINING AT ENGINEERING Yulhendra
PROGRAM DIFFERENCES IN LEARNING OUTCOMES IN THE 105 Edidas, Dedy Irfan PRACTICE OF MICROCONTROLLER SYSTEM USING
MCS51 MICROCONTROLLER TRAINER KIT 106 Hanne Aulia, Riki Mukhaiyar A NEW DESIGN OF HANDLESS STIRRED DEVICE THE READINESS OF STUDENT TO ENTREPRENEUR 107 Ernawati THROUGH INCORPORATION OF THE PILOT PROJECT PRACTICE
INFORMATION SYSTEM AND REPORT VALUE Indra Wijaya, Isra Mouludi, Fandy
PROCESSING BASED MICROSOFT VISUAL BASIC 6.0 ON 108 Neta, Yaslinda Lizar, Satria Ami SENIOR HIGH SCHOOL (CASE STUDY AT SMAN 12
Marta PADANG) DESIGN OF SIMULATOR FOR REPLACEMENT 109 Irwan Yusti, Ganefri, Ridwan OFTOOLSPRACTICE DIGITAL ENGINEERING IN THE
VOCATIONAL SCHOOL
IMPLEMENTATION OF MOBILE LEARNING Faiza Rini, Nizwardi Jalinus, MANAGEMENT SYSTEM (M-LMS) TO IMPROVE THE
110 Fahmi Rizal
EFFECTIVENESS OF STUDENT’S LEARNING ENGAGEMENT DOMESTIC EMPLOYMENT PROCESSING SYSTEM ON
Eddis Syahputra Pane, Kori 111 WORKING PROTECTION AND TRANSMIGRATION USING Cahyono
GEOGRAPHIC INFORMATION SYSTEM (GIS) 112 Netty Juliana DEVELOPMENT OF MALAY FRUIT ORNAMENT Oktaviani, An Arizal, Nadra ANALYSIS OF APPROPRIATE PEDESTRIAN CROSSING
113
116 Rusli Saputra, Sophan Sophian, Delia Putri
IMPACT OF THE TWI LEARNING MODEL IN LEARNING STONE AND CONCRETE CONSTRUCTIONS ON VOCATIONAL EDUCATION 114 115 124 126 127
INTERACTIVE VIDEO MEDIA WITH THE APPLICATION OF GROUP LEARNING STRATEGY
117 118 119
INSTRUCTIONAL DESIGN MODEL IN THERMODYNAMICS ON TECHNICAL VOCATIONAL EDUCATION AND TRAINING (TVET) TRAINING MODEL-BASED KNOWLEDGE MANAGEMENT SYSTEM FOR VOCATIONAL HIGH SCHOOL TEACHERS SKILLS ENGINEERING COMPUTER NETWORK
VIDEO ENCODING RASPBERRY PI COLLABORATIVE PROJECT-BASED LEARNING: AN
INFLUENCE THE LEARNING STRATEGY AND ENTRY BEHAVIOR TO YIELD LEARNING BUILDING CONSTRUCTION AND DRAWING 1 OF STUDENT LEARNING BROADCAST VIDEO SYSTEM WITH H264
IDENTIFICATION OF TECHNICAL PROGRAM TEST PROGRAMS ELECTRICITY CONSTRUCTION SERVICES BUSINESS COMPANY PROFITABILITY ANALYSIS BEFORE AND AFTER CORPORATE REBRANDING (Case study in Kyriad Bumiminang Hotel July – December 2015 and July – December 2016 period)
THE POTENTIAL OF RENEWABLE ENERGY (STUDY CASE IN TOMUAN HOLBUNG VILLAGE, ASAHAN REGENCY OF SUMATERA UTARA PROVINCE)
129 Kinanti Wijaya, Daniel Irvansius Tampubolon
MULTIMEDIA INTERACTIVE IN WEB PROGRAMMING SUBJECTS 121 Rice Novita
IDENTIFICATION THE IMPORTANCE OF LEARNING TOOLS DEVELOPMENT ON ENERGY-EFFICIENT BUILDING INNOVATIONS USING ROOT CAUSE ANALYSIS
128 Kemala Jeumpa
IMPROVING THE ESP STUDENTS’ VOCABULARY BY USING PICTURES IN CIVIL ENGINEERING STUDY PROGRAM AT FIRST SEMESTER OF EKASAKTI UNIVERSITY PADANG
THE PROSPECT OF OFFSHORE IRON SAND IN TIRAM BEACH PADANG PARIAMAN REGENCY WEST SUMATERA 125 Elda Martha Suri
123 Adree Octova, Ansosry, Yoszi Mingsi Anaperta, Indah Elok Mukhlisah
Resmi Darni, Z. Mawardi Effendi and Selamat Triono EXPERT MODEL SYSTEM ON ENTREPRENEURSHIP PERSONALITY
MEASUREMENT SYSTEM MAJORS OF TALENT INTEREST AND CAREER STUDENT USING CERTAINTY FACTOR 122
IN THE FACIAL SKIN CARE COURSE Dina Ampera, Asrah Rezki Fauzani Gunawan Ali, Kasman Rukun, Syahril Arwizet K, Nizwardi Jalinus, Krismadinata Leni Marlina, Aswandi Yuwalitas Gusmareta, Fahmi Rizal, Nurhasan Syah Youmil Abrian, Kasmita, Putri Rahma Mulia Ija Darmana, Nizwardi Jalinus, Ganefri Rahmaniar, Agus Junaidi
NEED ANALYSIS ON INDUSTRY REGARDING Reno Yelfi, Mukhayar, Nizwardi 130 QUALIFICATION OF GRADUATES DIPLOMA III Jalinus, Azwar Ananda
CULINARY MATERIAL SELECTION ANALYSIS AND MAGNET 131 Sepannur Bandri, M. Aldi Tio SKEWING TO REDUCE COGGING TORQUE IN
PERMANENT MAGNET GENERATOR COMPARISON OF DECISION TREE ALGORITHM METHOD (C4.5) AND NAIVE BAYES TO IDENTIFY STUDENT 132 Sri Restu Ningsih LEARNING RESULTS WITH COOPERATIVE LEARNING MODEL ONLINE ASSESSMENT TOOLS FOR 2013 CURRICULUM
133 Suartin, Hambali, Oriza Chandra BASE ON INFORMATION TECHNOLOGY DEVELOPING SOFT SKILLS LEARNING MODEL
134 Suryo Hartanto FOR MECHANICAL ENGINEERING STUDENTS OF
VOCATIONAL HIGH SCHOOL CLUSTER ANALYSIS DISTANCE INTER DISTRICT USING Ali Ikhwan, YasminMohd Yacob, 135 SINGLE LINKAGE METHOD FOR DETERMINATION OF Solly Aryza
MPLIK CAR OPERATION ZONE IN MEDAN CITY ELECTRONIC COMPONENT TESTER AS A LEARNING Delsina Faiza, Thamrin, Ahmaddul 136 MEDIA FOR CLASS X STUDENTS AUDIO VIDEO Hadi, Yongki Saputra
ENGINEERING SMKN 1 SUMBAR Yocky Syaida Adha Putra, Tengku SOIL STABILITY USING CEMENT PCC IN LUBUK
137 Ahmad Fauzan Syah MINTURUN PADANG, INDONESIA
LEARNING RESPONSE OF JOURNEY LEARNING Suparno, Bulkia Rahim, Zonny 138 COOPERATIV LEARNING AND LEARNING MODULE IN Amanda Putra, Junil Adri, Jasman
EDUCATION MEDIA LEVEL RESOURCE SHARING–BLENDED PROJECT BASED 139 Wahyudi LEARNING (RS-BPBL©) MODEL DEVELOPMENT IN
VOCATIONAL HIGH SCHOOL Ansosry, Adree Octova, Dedi STUDY MODELING MANAGEMENT OF MINING IN
140 Yulhendra DISTRICT SOLOK SUMATERA BARAT Eko Hariyanto, Solly Ariza Lubis, THE DESIGNING OF THE PROTOTYPE OF THE AIR
141 Zulham Sitorus, M. Iqbal QUALITY MEASURING HELMET
THE EFFECT OF STRATEGY OF TRAINING MODELS IN 142 Elfizon, Syamsuarnis, Oriza Candra LEARNING ELECTRICAL INSTALLATION SOFTWARE DEVELOPMENT OF CONCENTRATION
143 Elin Haerani SELECTION WITH INTEREST TEST BASED ON
INTELLIGENT SYSTEM DESIGNING LEARNING TOOLS BY USING PROBLEM BASED INSTRUCTION (PBI) MODEL ON ENERGY 144 Estuhono RESOURCE MATERIAL
INTEGRATED TO ENERGY SAVING CHARACTER FUZZY LOGIC BASED CONTROLLER FOR BUCK 145 Habibullah, Irma Husnaini, Asnil
CONVERTER STRATEGY, THE EFFECTIVENESS OF THE 146 Idi Jang Cik
IMPLEMENTATION E-LEARNING PROCESS IN SUPPORT
ART EDUCATION THROUGH FREE EXPRESSION APPRECIES, DISCIPLINE SCIENCE, AND 147 Indra Irawan MULTICULTURAL AS EFFORTS TO IMPROVE STUDENT CREATIVITY DEVELOPMENT OF NET ENTREPRENEURSHIP LEARNING
148 Muharika Dewi MODEL FOR UNIVERSITAS NEGERI PADANG
Mukhidin, Tuti Suartini, Bachtiar,
IMPLEMENTATION OF MODEL-BASED LEARNING 149
Aan Sukandar
ISO/IEC 17025 IN VOCATIONAL HIGH SCHOOL MEASUREMENT MODEL OF CONTRIBUTED FACTOR
Mulianti, Ambiyar, Generousdi 150 AND INDICATOR TOWARDS VOCATIONAL EDUCATION and Rodesri Mulyadi
PRODUCTIVITY Mulianti, Suhendrik Hanwar, MODELING FACTORS AFFECTING THE POLYTECHNIC
151 Generousdi and Budi Syahri GRADUATE COMPETENCE
THE INFLUENCE OF USING ANIMATION MEDIA AND Indra Wahyu, Fahmi Rizal, Rijal 152 LEARNING MOTIVATION TOWARD LEARNING RESULT Abdullah
OF AUTOMOTIVE STUDENTS IN SMK N 2 PAYAKUMBUH ROLE REINFORCEMENT OF LPTK PTK IN IMPROVING 153 Ungsi A.O.Marmai
VOCATIONAL TEACHERS’ QUALITY IN INDONESIA AT SMK N 5 PADANG BUILD AND DESIGN OF BUSINESS INTELLIGENCE
154 Yaslinda Lizar, Asriwan Guci UNIVERSITY SYSTEM AS DECISION SUPPORT ACADEMIC DEVELOPMENT ASSESSMENT MODEL TO HIGH ORDER
Wakhinuddin S, Bahrul Amin, 155 THINKING SKILL ORIENTATE FOR EVALUATION Waskito
STUDENT COMPETENCY
INFLUENCE OF PRELIMINARY TREATMENT ON MAKING Romel, Hefri, Syahrul, Arwizet, 156 COCONUT FIBER PARTICLE BOARD TO BENDING Syahril
STRENGTH AND IMPACT DEVELOPMENT OF INDUSTRIAL STATISTICS MODULE 157 Sanusi, Nandar Cundara C
USING PROJECT - BASED LEARNING (PjBL) APPROACH PREDICTED vulnerability Assessment of non Engineered houses
Rusnardi Rahmat Putra, Junji 158 based on damage data of the 2009 padang EARTHQUAKE IN KIYONO and Aiko FURUKAWA
Padang city, indonesia DEVELOMPENT OF WEB-BASED DECISION SUPPORT
Titi Sriwahyuni, Dedi Irfan, Ika SYSTEM FOR SCHOLARSHIP RECIPIENTS SELECTION
159 USING ANALYTICAL HIERARCHY PROCESS (AHP)
Pharma Dewi dan Hanny Maharani METHOD
Nelvi Erizon, Irzal, Jasman, Bulkia THE DEVELOPMENT OF WIND SAVONIUS WIND BLADE 160
Rahim, Junil Adri SYSTEM AS A ELECTRICAL GENERATOR EQUIPMENT THE EFFECT OF ISLAMIC WORK ETHICS AND SPRITUAL 161 Eka Mariyanti, Rasidah Nasrah LEADERSHIP ON EMPLOYEE’S COMMITMEN IN PADANG SHARIA HOTELS
Yeka Hendriyani, Nurindah THE DEVELOPMENT OF OBJECT ORIENTED 162
163 Riki Adriadi, Ganefri and Fahmi Rizal
Mulya Gusman, Totoh Andayono, Dedi Yulhendra, Adree Octova
Liliana, Afriani, Anwardi AUTOMOTIVE DEPARTMENT STUDENT PERCEPTION ON LECTURER COMPETENCIES, LEARNING FACILITIES, AND LEARNING MEDIA TO LEARNING ACTIVITIES
INFORMATION TECHNOLOGY AND DATA BASE (PTIPD) UIN SUSKA RIAU
OPTIMIZATION OF EXTERNAL LIGHTNING PROTECTION SYSTEM DESIGN IN BUILDING CENTER FOR
PERSONNAL MANAGEMENT IN INFORMATION SYSTEMS APPLICATIONS WITH TOGAF FRAMEWORK 175 172
Safrian Aswati, Saleh Malawat, Suhendra, Iskandar, Yessica Siagian, Arridha Zikra Syah
MICROCONTROLLER SKILL TRAINING FOR SMKN 2 PAYAKUMBUH AND SMKN 1 SUNGAI RUMBAI 176
174 Edidas, Legiman Slamet dan Ilmiyati Rahmy Jasril
173 Edidas dan Legiman Slamet CREATE A MICROCONTROLLER TRAINER KIT ON MICROCONTROLLER SYSTEM COURSE
171 Jusmita Weriza PATIENT INFORMATION SYSTEM DESIGN ON MATERNITY HOSPITAL RESTU IBU PADANG
THE EFFECT OF TOTAL RESISTANCE AND SPEED TO FUEL CONSUMPTION OF DUMP TRUCK HD 465-7 IN COAL MINING 170 Yasdinul Huda, B Herawan Hayadi SMART CLASSROM DESIGNS IN THE SMART EDUCATIONAL ENVIRONMENT
USE OF GEARBOX VIAR ON FISHING SHIPS 169
EMPLOYEE PRODUCTIVITY IN TWO CROSS CULTURES BASED ENTREPRENEURSHIP 164
Wakhinuddin S, Donny Fernandez, Andrizal, M Nasir, Rifdarmon
VARIOUS DESIGN 168
MODEL OF DESIGN DESIGN OF ACULTURATIVE SULAMAN MINANGKABAU IN LEARNING DESIGN
THE APPLICATION OF SIMPLE STRAIN GAUGE DYNAMOMETER IN LEARNING STYLE CUTTING LATHE 167 Yuliarma
Wenny Marthiana, Suryadimal, Edi Septe, Duskiardi, Andika
IN SMKN 6 166
DEVELOPMENTAL OF MEDIA LEARNING BASED ON TUTORIAL VIDEO AT CHARACTER MAKE UP SUBJECT
Tyas Asih Surya Mentari, Murni Astuti, and Linda Rosalina
THE IMPLEMENTATION OF DECISION TREE ALGORITHM C4.5 USING RAPIDMINER IN ANALYZING DROPOUT STUDENTS 165
Sri Wahyuni, Kana Saputra Saragih, Mochammad Iswan Perangin-Angin
Rasinov Chandra, Mawardi, Anggi Aprianto, Reza Rahmadani
Int. J. of GEOMATE, Month, Year, Vol.00, No.00 (Sl. No. 00), pp. 00-00
4 th International Conference on Technical and Vocation Education and Training
Padang : November 9-11, 2017 DEVELOPMENT OF MECHANICAL TECHNOLOGY LEARNING MODULE PROGRAM EXPERTISE OF SMK ENGINEERING
M. Giatman 1 , Waskito 2 and Maruli Sihombing 3 1 Faculty of Engineering, Universitas Negeri Paddang, Indonesia ABSTRACT: The low learning outcomes in the workshop is estimated by the limitations of existing learning media. Therefore the need to design a learning media workshop in the form of mechanical technology module.
The purpose of this research is to develop a valid, practical and effective learning module that is adjusted to the 2013 curriculum. The research type used is Research and Development (R & D) with development procedure using 4-D model (four-D model). Research consists of four stages, namely: define, design, develop, disseminate. This study uses primary data obtained from material experts and media experts. Data analysis technique used is descriptive data analysis techniques. This research resulted in the development of a learning module for the basic program of good mechanical technology expertise. The results show that the module meets the principle of relevance in qualification of instructional media with 86% validity value for material and 92% for media (very valid). Module practicality level based on teacher's response with value 87,81% (very practical) and learners response 89,19% (very practical). Level of effectiveness learn learners learn from pretest and posttest value. Where with the average value of pretest 52.14, the average value of posttest 72.61 or up 20.14, Therefore the effectiveness of the use of the module is effective in an effort to improve learning outcomes of learners. Based on the findings, this study concludes that this module is valid, practical, and effective to be utilized as a learning media on basic mechanical technology of machining engineering skills program.
Keywords: Learning Media, Module, Validity, Practicality, Effectiveness 1.
INTRODUCTION The development of a nation is always accompanied by development in the field of education. Based on the National Education Act aims to "develop the potential of learners to become human beings who believe and be cautious to God Almighty, noble, healthy, knowledgeable, capable, creative, independent, and become citizens of a democratic and responsible [1], meaning education is to lead learners towards behavioral, intellectual, moral, and social changes, so hopefully can live independently.
The role of educators in learning is very decisive learning outcomes. Educators must be able to create a good learning environment that allows for learners to study harder. To create a better atmosphere, the educator must be professional and have a number of abilities, including the ability to plan and implement the teaching [2]. Therefore, teachers as professionals serve to improve the dignity and role of teachers as learning agents who are always trying to improve the quality of education [3].
To get the maximum learning outcomes, it takes an appropriate and effective learning media [4]. One of the standard learning components in supporting effective and efficient learning process is using media [5]. Learning media is one important component in supporting the learning process, and one of them is the module. The learning module is a systematically and attractively taught material that includes material content, methods and evaluation that can be used independently to achieve the expected competencies [6]-[7]. The module consists of 1) the introduction, 2) the learning part, and 3) the bibliography. The introductory section contains (a) a general explanation of the module, (b) the learning indicator. The learning section contains (a) a description of the learning content, (b) summary, (c) tests, (d) key answers, and (e) feedback [7].
In its implementation it is necessary to consider the specifications and characteristics of the basic group of skills program that will be taught and the development of the students, so that in the learning process create a conducive class atmosphere and eager to follow the learning. With the help of the learning module is expected learners will more easily understand the theoretical material conveyed by the teacher [8]-[9].
Vocational High School (SMK) is a formal educational institution that prepares students to have competence in a particular vocational field with the mastery of materials theory and practice, to meet the needs of society and the world of work. In accordance with the vision of SMK is: "Formation of human beings and educational ecosystems of SMK with character based on mutual assistance", with the mission: "To realize strong SMK education behavior, access to vocational school that is widespread, equitable and fair, quality learning, , increased bureaucratic effectiveness and public engagement "[10].
SMK Negeri 2 Padangsidimpuan as one of the middle-level formal education institutions in Page 423
th Page 424
4 International Conference on Technical and Vocation Education and Training
Padang : November 9-11, 2017 Int. J. of GEOMATE, Month, Year, Vol.00, No.00 (Sl. No. 00), pp. 00-00
Padangsidimpuan City has an important role in will develop a module of learning mechanical improving the quality of education and produce technology so that the type of research used is qualified graduates who are able to fill jobs Research and Development / (R & D) with Model according to the competence of expertise. approach (four-D model) Define, Design, Develop Mechanical Technology is one of the basic skills and Disseminate. The 4-D model was chosen in this programs that must be mastered by the students of study because the development model has a class ten and in the study in the odd semester and systematic procedure, in accordance with the even semester with a duration of 8 hours per week. background problems of this research [12]-[13]. In the 2013 curriculum, there is an emphasis on the improvement and balance of soft skills and hard skills, including aspects of attitude, skills and knowledge competencies that can support the maximum success of learning achievement.
Based on the reality of the field, learning of mechanical technology in machining engineering work in workshop, less supported by basic knowledge. Students are given direct practice learning in the process of making the workpiece without preceded by adequate theoretical knowledge, except with only a few explanations of the work instructions. The learning process has not been effective yet, the teaching method is still traditional and there is no source of learning module that is distributed to the learners during the learning process. Table 1. shows the distribution of the students' odd semester grades for the academic year 2016/2017 Tabel 1. Student Scores Semester of Academic Year 2016/2017
The number Value Value No Class of students ≥ 70 ≤ 70
1 X TPM 1
33
23
10 Figure 1. 4-D Module Development Procedure in
2 X TPM 2
28
25
3 modification of (Trianto, 2009: 190) Number
61
48
13 21,32 100 % 78,68%
Percentage
3.
RESULTS OF DEVELOPMENT AND % Source: Master of Mechanical Technology SMK N. 2 Padangsidimpuan DISCUSSION By looking at table 1. it can be seen that the
3.1 Development Results percentage of students who have not graduated or not yet reached KKM (70) is still quite large and this
The following will explain the development indicates that the learning outcomes through the results based on the stages. learning process that is applied is still not optimal, it is deemed necessary to approach the use of effective
3.1.1 Definition stage learning media and efficient. Thus it is expected that the learning process can take place more active,
The Define stage aims to define and define innovative, creative, effective and enjoyable for various sources of information related to the module learners, which in the end expected the results of to be developed. Stage Define includes three steps, learning to be better. One of the learning media that namely: can support the practice activity in the workshop is the availability of modules. This is reinforced by Observation Observation is done in the package of machining several research results and theories that reveal that engineering expertise by observing the learning the module can guide participants to study process in the classroom, looking at the learning systematically, structured, and independent [11]. resources used by the students. The Observing the facts that have been described, it is implementation of the 2013 curriculum requires deemed necessary to research the development of that learning be done through a scientific-based mechanical technology module in SMK N.2 approach, an approach that uses the stages of Padangsidimpuan. observing, asking, trying, reasoning, conclude and communicate .. The results of observations
2. RESEARCH METHODS
made found 1) The book of mechanical technology in the school library books published In accordance with the purpose of this research
Int. J. of GEOMATE, Month, Year, Vol.00, No.00 (Sl. No. 00), pp. 00-00
4 th International Conference on Technical and Vocation Education and Training
Padang : November 9-11, 2017 1978; 2) Module of mechanical technology not yet enough in library; 3) Theoretical learning still uses conventional methods; 4) Slow work practice process (one job one semester); 5) The existence of dependence of students to the teacher; 6) Learning outcomes are still low. Interview Interviews were conducted with mechanical technology teachers. Interviews conducted to teachers aims to determine the learning process and learning outcomes of learners. The results of interviews obtained information; 1) The theoretical learning given to learners still uses conventional methods; 2) Handbook of learners in the form of learning module of mechanical technology not yet exist. The next step is to collect the required module material information in accordance with the basic competencies and demands of the 2013 curriculum. Identification of the material is done by collecting and selecting the relevant material and according to the curriculum of 2013 where the learning must be in accordance with the Core Competence and Basic Competence (KD).
- Stage of Effectiveness The effectiveness test result of the module can be seen from the pretest result of the learner (before using the module) and the postest learners (after using the module). To see comparison of learning result used t-test. From the analysis result, it is known that the value of sig (2-tailed) is 0,000 <0,05 then according to the decision of paired sample t- test, it can be concluded Ho is rejected and Ha accepted, which means there is difference between pretest learning result with posttest .
Stage Design At this stage module design is made to be made in accordance with the define stage that has been done. The purpose of this stage is to design a module that can be used as a learning medium, and get an overview of the modules to be developed.
Development Stage This stage aims to produce valid, practical and effective products. This stage consists of validity test by validator, practicality test according to teacher and student appraisal, and effectiveness test. The experimental data of the basic mechanical technology module of mechanical engineering skills program are as follows:
Dissemination Stage The stage of dissemination or dissemination is done by mechanical technology teachers who will disseminate or introduce this module in class.
3.2 Discussion This research produces a module as a media of mechanical technology that can be used as instructional media for basic machining technique program. The development of this module is based on the initial observation of the learning process aimed to find out the problems, obstacles, and phenomena encountered in the field related to learning. Furthermore, the authors do needs analysis (need analysis), including the analysis of teaching unit, identification of the required materials. This module has passed the test phase of validity, practicality and effectiveness. In the validity test is done by seeking expert opinion through validation sheet. The validated aspect contains the feasibility of content, language, content and usefulness for the content and content, language, appearance, ease of use, consistency, format and keypad for the media. From the experiments conducted got results that the whole aspect is in the category very valid.
- Phase module mechanical technology validation. The validity test data is obtained from the validator response about the validity of the module used in the learning of mechanical technology. Validation is done by five validators, 2 (two) material validators and 3 (three) media validators. Assessment results provided by material validators with an average value of 86% and media validators with an average rating of 92% are in accordance with [14]. it can be concluded that the module developed in the category included "very valid".