63
Figure 20 . Physical Model in ESRI Shape Format ESRI
4.5 Data Availability
Data availability is needed as an input of the system. Therefore during the research, the data capture questionnaire for industries were launched and distributed to several
industries located in Upper Citarum River Basin via the Ministry of Environment
Appendix 2, but up to now the data are still un-complete yet. As a solution, some
secondary data in the regular report 2006 is used. This condition could occur, because many perceptions from the side of stakeholders
express that there is a piling up of regular industrial wastewater raw data. Then the stakeholders are not sure whether the data can be processed without application system
quickly. Therefore, within the IWMS, the stakeholders can make process and analysis of the data, respectively. The research refers at several data as input component from many
sources, e.g.: 1 Digital Base map Bakosurtanal Scale 1 : 25.000 year 2002
2 Measurement Data of Industrial Pollution Load 2006 in Upper Citarum River Basin.
64 3 The Calculation of River Class using Storet Method: Citarum-Nanjung, Tanjungpura,
Cijeruk, Sapan, Majalaya, Wangisagara, Bd. Curug, Bd. Walahar, Burujul, and Dayeuhkolot.
4 Industrial Compilation Data in Upper Citarum River Basin year 2006 5 The Decree of Minister of Environmental on Surface Water Analysis Method No.
372003. 6 The Decree of Minister of Environmental on Waste Water Quality Standard for
Industrial Estates No. 31998. 7 Government regulation No. 822001 on Water Quality Management and Water
Pollution Control. 8 Government regulation No. 201990 on Status of Water Quality Class.
9 The Decree of Minister of Environmental on Wastewater Quality Standard for Industrial Activities No. 231995.
10 The Decree of Minister of Environmental on The methods of Determining the Carrying Capacity of Water Pollution Load of Water Resources No. 1102003.
11 Some monitoring reports on industrial wastewater status regular, by industry
4.6 Logical Framework
Kategori