Operation Request – DeleteSensor Operation Response – DeleteSensorResponse

66 Copyright © 2011 Open Geospatial Consortium.

14.2.1 Operation Request – DeleteSensor

A DeleteSensor operation request is performed by sending an instance of the DeleteSensor data type to the service. The DeleteSensor data type is derived from the ExtensibleRequest data type see clause 9.2.1 and therefore inherits all the properties contained in that data type. DeleteSensor does not restrict the content model of ExtensibleRequest. Requirement http:www.opengis.netspecSWES2.0reqDeleteSensorRequestproperties REQ 56. The DeleteSensor request shall contain the properties defined for ExtensibleRequest. In addition, it shall include the properties according to Table 32. Table 32 — Property in the DeleteSensor data type Name Definition Data type and values Multiplicity and use procedure Pointer to the proceduresensor that shall be deleted. operation semantics are defined by specification of targeted SWE service type OM_Process a see ISODIS 19156 value shall match one of the procedures from the AbstractOfferings listed by the service see clause 7.2.2 One mandatory a Note: the primary use of this property is to provide a pointeridentifier – see clause 16.3.1 for further details

14.2.2 Operation Response – DeleteSensorResponse

The DeleteSensorResponse data type represents the response to a DeleteSensor operation request. The DeleteSensorResponse data type is derived from the ExtensibleResponse data type see clause 9.2.2 and therefore inherits all the properties contained in that data type. DeleteSensorResponse does not restrict the content model of ExtensibleResponse. Copyright © 2011 Open Geospatial Consortium. 67 Requirement http:www.opengis.netspecSWES2.0reqDeleteSensorResponseproperties REQ 57. The DeleteSensorResponse shall contain the properties defined for ExtensibleResponse. In addition, it shall include the properties according to Table 33. Table 33 — Property in the DeleteSensorResponse data type Name Definition Data type and values Multiplicity and use deletedProc edure Pointer used to reference the procedure that has been deleted by the service. OM_Process a see ISODIS 19156 One mandatory a Note: the primary use of this property is to provide a pointeridentifier – see clause 16.3.1 for further details

14.3 Exceptions