Copyright © 2011 Open Geospatial Consortium.
57 The details of the operation request and response will be explained in the following
subsections.
12.2.1 Operation Request – UpdateSensorDescription
An UpdateSensorDescription operation request is performed by sending an instance of the UpdateSensorDescription data type to the service.
The UpdateSensorDescription data type derives from the ExtensibleRequest data type see clause 9.2.1 and thus inherits all the properties contained in that data type.
UpdateSensorDescription does not restrict the content model of ExtensibleRequest.
Requirement
http:www.opengis.netspecSWES2.0reqUpdateSensorDescriptionRequestproperties
REQ 45. UpdateSensorDescription shall contain the properties defined
for ExtensibleRequest. In addition, it shall include the properties according to Table 28.
Table 28 — Properties in the UpdateSensorDescription data type
Name Definition
Data type and values Multiplicity and
use
procedure Pointer to the
proceduresensor of which the description shall be
updated. OM_Process
a
see ISODIS 19156 value shall match one of the
procedures from the AbstractOfferings listed
by the service see clause 7.2.2
One mandatory
procedureD escription
Format identifier of the format in
which the proceduresensor
description is given in FormatCode
see section 10.2.2 value shall match one of the
formats supported by the AbstractOfferings see
clause 7.2.2 with the given procedure
One mandatory
description the updated description
SensorDescription see clause 9.2.3
One to many mandatory
a Note: the primary use of this property is to provide a pointeridentifier – see clause 16.3.1 for further details
12.2.2 Operation Response – UpdateSensorDescriptionResponse
The UpdateSensorDescriptionResponse data type represents the response to an UpdateSensorDescription operation request.
58
Copyright © 2011 Open Geospatial Consortium.
The UpdateSensorDescriptionResponse data type derives from the ExtensibleResponse data type see clause 9.2.2 and thus inherits all the properties contained in that data type.
UpdateSensorDescriptionResponse does not restrict the content model of ExtensibleResponse.
Requirement
http:www.opengis.netspecSWES2.0reqUpdateSensorDescriptionResponseproperties
REQ 46. UpdateSensorDescriptionResponse shall contain the properties
defined for ExtensibleResponse. In addition, it shall include the properties according to Table 29.
Table 29 — Property in the UpdateSensorDescriptionResponse data type
Name Definition Data type and values
Multiplicity and use
updatedPro cedure
Pointer to the proceduresensor of
which the sensor description was
updated. OM_Process
a
see ISODIS 19156 value shall be the
one provided in the request
One mandatory
a Note: the primary use of this property is to provide a pointeridentifier – see clause 16.3.1 for further details
12.3 Exceptions
