Background information Progress report Recommendation

Indonesian Information Paper The Third Meeting of ACCSQ Wood Based PWG Bangkok-Thailand, 15-16 December 2005 1 Agenda Item 5.2. Exchange of Information for Transparency of Wood and Wood Based Products standards, technical regulations and conformity assessment procedures

I. Background information

It was agreed during the second meeting of ACCSQ Wood-based PWG held in KL- Malaysia on 28-29 June 2005, Indonesia has been assigned as a Lead Country for Objectives 1 of Work Program of WB-PWG : To promote transparency of Wood Based Products standards, technical regulations and conformity assessment procedures among Member Countries To follow up the above decision, Indonesia has developed and distributed the Questioner on 16 September 2005 to ASEAN member Countries for their comments and response. The questioner will be used as a tool to collect all necessary information from member countries. Based on the response received, Indonesia will analyze and report the summary of compilation to the meeting.

II. Progress report

Comments and inputs has been received from the following ASEAN members countries :

1. Malaysia :

The information paper from Malaysia as enclosed.

2. Indonesia :

The information paper from Indonesia as enclosed.

III. Recommendation

The meeting may take note the information provided by Malaysia and Indonesia. ASEAN members countries which has not sent yet their response to Indonesia, urged to send it as soon as possible for data compilation. - 1 - Questionnaire Template for Transparency of Wood and Wood Based Products standards, technical regulations and conformity assessment procedures Question 1: Existing Standard on Wood-based sector As agreed during the second meeting of WB-PWG for harmonization purposes, common priorities will be given to three areas: i Panel products; ii Sawn timber; and iii Flooring products, but not limited only on them. Therefore, it is important to know all existing standards in each member country. Please fill in your existing condition on the following item: I. Panel products No Product Category Standard Code by Item Title of Standards Reference Status of adoption IDTMOD NEQ Status of Implementa tion 1 2 3 4 5 6 7 1. Plywood SNI 01-5008.2-2000 Plywood for general use • JAS of Plywood for general use – 1988 • BS No. 6566-1983 • IHPA - 1991 MOD Voluntary SNI 01-5008.7-1999 Structural plywood • SNI 01-2704-1992 Plywood for general use • JAS No. 1516, 1989 Structural Plywood • AS 2269-1979 Structural Plywood • US Product Standard PS 1-74 Construction and industrial plywood with typical APA grade trade marks MOD Voluntary SNI 01-5008.9-2000 Fancy teak plywood • SNI 01-2025-1990 Fancy plywood and fancy block board MOD Voluntary SNI 01-2024-1990 Plywood for concrete panel • JAS 1988 concrete panel plywood MOD Voluntary SNI 01-2025-1996 Fancy plywood and block board • JAS 1993 Fancy plywood MOD Voluntary SNI 01-4240-1996 Plywood for container flooring • JIS Z 2111, 1997 Method of compression test for wood • JIS Z 2113, 1997 Method of brading test for wood • SNI 01-2704-1992 Plywood for general use MOD Voluntary SNI 01-4448-1998 Film faced plywood • DIN 68 792 Large area shuttering panels of veneer plywood for concrete and reinforced concrete • JAS 1993 Concrete Panel plywood • SNI 01-2704-1992 MOD Voluntary - 2 - No Product Category Standard Code by Item Title of Standards Reference Status of adoption IDTMOD NEQ Status of Implementa tion 1 2 3 4 5 6 7 Plywood for general use • SNI 01-2025-1990 Fancy plywood and block board 2. Particle Board SNI 01-2105-1996 Specification of particleboard • JIS A 5908:1994 Particleboards MOD Voluntary 3. Fibreboard SNI 01-4449-1998 Medium density fibreboard • SNI 01-2704-1992 Plywood for general use • EN 310 Wood-based panels determination of bending strength and modulus of elasticity in bending • EN 316 Wood fibreboards definition, classification and symbols • EN 317 Particleboards and fibreboards determination of swelling in thickness after immersion in water • EN 319 Particleboards and fibreboards determination of tensile strength perpendicular to the plane of board • EN 320 Fibreboards determination of resistance to axial withdrawal screws • EN 322 Wood-based panels determination of moisture content • EN 323 Wood-based panels determination of density • EN 324-1 Wood-based panels determination of dimensions of panels part 1: Determination of thickness, width and length • EN 324-2 Wood-based panels determination of dimensions of panels part 2: Determination of squareness and straightness • EN 328-1 Fibreboards determination of surface absorption part 1: Test method for dry process fibreboards • ISO 3340 Fibre building boards determination of sand contents • EN 120 Wood-based panels determination of formaldehyde content-extraction method MOD Voluntary 4. Cement board SNI 01-2104-1991 Wood wool cementboard DIN 1101 Wood wool board MOD Voluntary - 3 - No Product Category Standard Code by Item Title of Standards Reference Status of adoption IDTMOD NEQ Status of Implementa tion 1 2 3 4 5 6 7 SNI 03-0580-1989 Pulp cementboard JIS Pulp Cement board MOD Voluntary 5. Laminated veneer lumber SNI 01-6240-2000 Laminated veneer lumber JAS 1998 Laminated veneer lumber MOD Voluntary II. Sawn Timber No Product Category Standard Code by Item Title of Standards Reference Status of adoption IDTMOD NEQ Status of Implementa tion 1 2 3 4 5 6 7 1. Sawn Timber SNI 01-5008.1-1999 Hardwood sawntimber • The Malaysian Grading Rules for Sawn Hardwood Timbers, Edition 1984 MOD Voluntary SNI 01-5008.5-1999 Teak sawntimber • The Malaysian Grading Rules for Sawn Hardwood Timbers, Edition 1984 MOD Voluntary SNI 01-5008.11-2000 Tusam Pinus mercusii Jungh et. De Vr. sawn timber • SNI 01-5008.1-1999 Hardwood sawntimber MOD Voluntary SNI 01-0608-1989 Wood for furniture, physical and mechanical properties • SNI 01-5008.1-1999 Hardwood sawntimber MOD Voluntary SNI 01-6077-1999 Mahagony sawn timber for furniture material • SNI 01-3574-1994 Specification of mahagony logs • SNI 01-0608-1989 Wood for furniture, physical and mechanical properties MOD Voluntary SNI 01-6078-1999 Sonokeling sawn timber for furniture material • SNI 01-3572-1994 Specification of sonokeling logs • SNI 01-0608-1989 Wood for furniture, physical and mechanical properties MOD Voluntary SNI 01-6244-2000 Sawn timber for furniture component • SNI 01-5008.1-1999 Hardwood sawntimber • SNI 01-5008.5-1999 Teakwood sawntimber MOD Voluntary III. Flooring products No Product Category Standard Code by Item Title of Standards Reference Status of adoption IDTMOD NEQ Status of Implementa tion 1 2 3 4 5 6 7 1. Flooring SNI 01-5008.13-2002 Flooring hardwood • SNI 01-5008.4-1999 Hardwood moulding • SNI 01-5008.8-1999 Teakwood mouldings • JAS No. 990, July 2000 Flooring MOD Voluntary - 4 - IV. Other wood products No Product Category Standard Code by Item Title of Standards Reference Status of adoption IDTMOD NEQ Status of Implementa tion 1 2 3 4 5 6 7 1. Logs SNI 01-5007.1-2003 Teakwood logs • SNI 01-5007.17-2001 Measurement and volume table of teakwood logs MOD Voluntary SNI 01-5007.2-2000 Measurement and volume table of hardwood logs • SNI 01-0187-1987 Regulation of measurement and volume table of Indonesian hardwood logs • SNI 01-0192-1987 Regulation of measurement and volume table of fancy wood logs MOD Voluntary SNI 01-5007.3-2000 Code of practice for grading of hardwood logs • SNI 01-5007.2-2000 Measurement and volume table of hardwood logs • SNI 01-0188-1987 Grading of softwood logs • SNI 01-0189-1987 Grading of hardwood logs MOD Voluntary SNI 01-5007.4-2000 Large hardwood logs • SNI 01-5007.2-2000 Measurement and volume table of hardwood logs • SNI 01-5007.3-2000 Code of practice for grading of hardwood logs MOD Voluntary SNI 01-5007.5-2000 Medium hardwood logs • SNI 01-5007.2-2000 Measurement and volume table of hardwood logs • SNI 01-5007.3-2000 Code of practice for grading of hardwood logs MOD Voluntary SNI 01-5007.6-2000 Sungkai Peronema canescens Jack. logs • SNI 01-5007.2-2000 Measurement and volume table of hardwood logs • SNI 01-5007.3-2000 Code of practice for testing of hardwood logs MOD Voluntary SNI 01-5007.7-2000 Merbau Intsia spp.Afzelia spp. logs • SNI 01-5007.2-2000 Measurement and volume table of hardwood logs • SNI 01-5007.3-2000 Code of practice for grading of hardwood logs MOD Voluntary SNI 01-5007.8-2000 Perupuk Lophopetalum spp. logs • SNI 01-5007.2-2000 Measurement and volume table of hardwood logs • SNI 01-5007.3-2000 Code of practice for grading of hardwood logs MOD Voluntary SNI 01-5007.9-2000 Gmelina and Acacia mangium logs • SNI 01-5007.2-2000 Measurement and volume table of hardwood logs • SNI 01-5007.3-2000 Code of practice for grading of hardwood logs MOD Voluntary SNI 01-5007.10-2000 One hundred species of hardwood logs • SNI 01-5007.2-2000 Measurement and volume MOD Voluntary - 5 - No Product Category Standard Code by Item Title of Standards Reference Status of adoption IDTMOD NEQ Status of Implementa tion 1 2 3 4 5 6 7 table of hardwood logs • SNI 01-5007.3-2000 Code of practice for grading of hardwood logs SNI 01-5007.11-2000 Tusam Pinus merkusii Jungh et. de Vr. logs • SNI 01-5007.2-2000 Measurement and volume table of hardwood logs • SNI 01-5007.3-2000 Code of practice for grading of hardwood logs MOD Voluntary SNI 01-5007.12-2000 Sonokeling Dalbergia latifolia Roxb and Sonokembang Pterocarpus indicus Willd logs • SNI 01-5007.2-2000 Measurement and volume table of hardwood logs • SNI 01-5007.3-2000 Code of practice for grading of hardwood logs MOD Voluntary SNI 01-5007.13-2000 Swietenia macrophylla and Swietenia mahagony logs • SNI 01-5007.2-2000 Measurement and volume table of hardwood logs • SNI 01-5007.3-2000 Code of practice for grading of hardwood logs MOD Voluntary SNI 01-5007.14-2000 Rasamala Altingia excelsa logs • SNI 01-5007.2-2000 Measurement and volume table of hardwood logs • SNI 01-5007.3-2000 Code of practice for grading of hardwood logs MOD Voluntary SNI 01-5007.15-2000 Agathis Agathis spp. logs • SNI 01-5007.2-2000 Measurement and volume table of hardwood logs • SNI 01-5007.3-2000 Code of practice for grading of hardwood logs MOD Voluntary SNI 01-5007.16-2000 Sengon Paraserianthes falcataria and jabon Anthocephalus cadamba logs • SNI 01-5007.2-2000 Measurement and volume table of hardwood logs • SNI 01-5007.3-2000 Code of practice for grading of hardwood logs MOD Voluntary SNI 01-5007.17-2000 Measurement and content table of teakwood logs • SNI 01-5007.2-2000 Measurement and volume table of hardwood logs • SNI 01-5007.3-2000 Code of practice for grading of hardwood logs MOD Voluntary 2. Moulding SNI 01-5008.4-1999 Hardwood mouldings • SNI 01-2704-1992 Plywood for general use • JAS No. 112, January 1996 Glued laminated timber MOD Voluntary SNI 01-5008.8-1999 Teakwood mouldings • SNI 01-2027-1990 Wood mouldings • SNI 01-2029-1990 Sawn teakwood MOD Voluntary SNI 01-5008.10-2001 Tusam Pinus merkusii Jungh et. De Vr. mouldings • SNI 01-5008.4-1999 Hardwood mouldings • JAS No. 112, January 1996 Glued Laminated MOD Voluntary - 6 - No Product Category Standard Code by Item Title of Standards Reference Status of adoption IDTMOD NEQ Status of Implementa tion 1 2 3 4 5 6 7 Timber 3. Jointed board and jointed stick SNI 01-6243.2-2000 Jointed board and jointed stick for tabel • SNI 01-2704-1992 Plywood for general use • JAS No. 112, Januari 1996 Glued Laminated Timber • SNI 01-5008.4-1999 Hardwood mouldings MOD Voluntary SNI 01-6243.1-2000 Jointed board and jointed stick for window frame and door frame • SNI 01-5008.11-1999 Hardwood mouldings MOD Voluntary SNI 01-6020-1999 Grading and testing of decoratif jointed board • American National Standard Forhard Wood and Decorative Plywood 1983 • JAS, 1996 Glued Laminated Timber MOD Voluntary 4. Furniture SNI 12-1015-1989 Wooden chairs size for primary school - NEQ Voluntary SNI 12-1016-1989 Wooden table size for primary school - NEQ Voluntary SNI 12-1281-1989 Wooden beds - NEQ Voluntary SNI 12-1525-1989 Wooden Chain size for junior school - NEQ Voluntary SNI 12-1526-1989 Wooden chain size for senior high school - NEQ Voluntary SNI 12-1527-1989 Wooden desk size for junior high school - NEQ Voluntary SNI 12-1528-1989 Wooden desk size for senior high school - NEQ Voluntary SNI 12-2991-1992 Office furniture wooden desk - NEQ Voluntary SNI 12-3051-1992 Wooden single college chair - NEQ Voluntary SNI 12-6120-1992 Office wooden service chair - NEQ Voluntary SNI 19-7107-2005 Wooden dining chair - NEQ Voluntary SNI 19-7108-2005 Wooden desk and chair non Jati wood JIS K5400-1990 Testing Method for finishing furniture NEQ Voluntary SNI 19-7109-2005 Wooden products computer desk • JIS 1023-1989 Office furniture wooden desk and tables • ISO 150-90981-1994 Bunk Bed for domestic use-safety requirement and test part I safety requirements DIN • EN 747 part I bunks beds for domestic use safety requirements NEQ Voluntary SNI 19-7110-2005 Bunk bed for domestic use safety requirement not jati wood - NEQ Voluntary SNI 19-4782-1998 Wood pallets - NEQ Voluntary SNI 01-4240-1996 Plywood for container use JIS 2111-1979 JIS 2113-1979 NEQ Voluntary SNI 01-5008.2- 2000 Plywood for general use - NEQ Voluntary 5. Housing components SNI 01-6243-2000 Jointed board and jointed stick for window frame - NEQ Voluntary - 7 - NOTE : 1 Number of order 2 Product category by type in the wood-based sector. 3 National Standard identification eg: SNITISIMS etc If the related product category consists of more than one standard code, please specify all. 4 Title of national standard in English. 5 Normative reference standard used in the development of the related national standard, it could be internationalregionalassociation or national standards eg: ISOENJAS etc. 6 Status of adoption, please refer to ISOIEC Guide 21-1:2005 IDT : Identical, MOD : Modified or NEQ : Not Equivalent If any modification MOD, please provide further explanation by annex. 7 Status of standard implementation mandatory or voluntary Remarks for IV . Other Wood Products: E.g.: Logs, Moulding, Furniture, Housing Components, Packing Materials etc. Question 2: Technical Regulation TR Each ASEAN member country has own technical regulation dealing with wood-based sector. Accordingly, please fill in your answers on the following: No Title of TR TR Decree Effective date Scope of Product Brief of TR Issued by Reference 1 2 3 4 5 6 7 8 1. The Indonesian scaling rules and volume table for hardwood logs 68VI-BPPHH 2004 18 June 2004 Hardwood logs from natural forest, plantation forest, and fancy wood logs • Scaling methods • Scaling instruments • Volume table • Inspection method Director General of Forestry Production Development • SNI 01-5007.2-2000 Measurement and volume table for hardwood logs • SNI 01-5007.19- 2003 Small hardwood logs 2. The Indonesian grading rules for sawn hardwood 02VI-BPPHH 2005 7 March 2005 Sawn hardwood • Wood species identification • Scaling method • Quality determinatio n • Inspection method Director General of Forestry production development SNI 01-5008.1-1999 Sawn hardwood 3. Indonesian Product which will be exported No. 07M-DAGPER42005 19 April 2005 - Log - Sawn Timber • Ban on export for log and Sawn Timber products Director General of Foreign Affair Trade, Ministry of Trade HS 44.03, 44.04, 44.06, 44.07 No. 07M-DAGPER42005 19 April 2005 - Plywood - Moulding • Trade export administratio n procedure for plywood Director General of Foreign Affair Trade, HS 44.08 up to 44.12, 4413.00, 4414.00 HS 44.15 up to - 8 - No Title of TR TR Decree Effective date Scope of Product Brief of TR Issued by Reference 1 2 3 4 5 6 7 8 and moulding Ministry of Trade 44.18, 4419.00, 4421.90.20, 4421.90.50 up to 9406.00 NOTE : 1 Number of order 2 Title of Regulation in English 3 Number of decree 4 Date of effectiveness for implementation 5 Name of product and HS number 6 Please provide explanation in short 7 Institution that issues the TR eg: Council, Prime MinisterPresident, Ministry, etc 8 Filled the national standard code if it is used as a reference Question 3: Certification Procedure Each ASEAN member country has different certification procedures in the wood based sector. To compile this information, please provide in details and attach relevant flowchart andor sample of certificate of the following: 3-1 Product approval procedures for export Based on the Decree of the Indonesian Minister of Industry and Trade no. 647MPPKep102003 dated on October 16 th , 2003 about “ Export on forest based products” explained that : • Export just can be done by a exporting producer company that has got an approval admission as registered exporters on forest based products Eksportir Terdaftar Produk Industri Kehutanan-ETPIK from the Minister of Industry and Trade cq. Director General of International Trade. • The implementation of the export of wood should get the endorsement from the Agency of Forest based Industry Revitalization, namely for forestry products that counted in HS. 4406, HS 4407, HS 4408, HS 4409, HS 4410, HS 4411, HS 4412, HS 4413, HS 4415.20, HS 4418, HS 4419.00.100, HS 4421.90.100, HS 4421.90.300 and HS 9406.00.000. Based on the Joint Decree between the Minister of Forestry and Minister of Industry and Trade No. 350Menhut-VI2004, No 598MPPKep92004 regarding “ The prohibition of wood railway sleepers and sawn timber” explained that : • Railway sleepers HS 4406 prohibited to be exported. - 9 - • Sawn Timber chipped lengthwise, sliced or peeled, whether or not planed, sanded or end jointed, of a thickness exceeding 6mm, HS 4407 are prohibited to be exported. Based on the Minister of Finance Decree no. 92PMK.022005 about “ The exporting of special good item and the sum of levy for export tariff” explained that : • Veneer HS 4408.10.10.00 to HS 4408.90.90.00, the export tax is 15 • Wood chips, export tax is 15 • Woodworking sawn timber, processed by drying machinekiln drying with water contentsmoisture contents ≤16 and processed by moulder machine and also has accurate thickness and wide at all the same surfaces and the thickness is not more than 12 cm and the wide is not more than 25 cm , HS.ex 4407.10.10.00 to HS ex 4407.99.90.00 the export tax is 15 3-2 Product approval procedures for import All wood products are permitted to be imported from abroad : a. Log ; import duty 0 b. Plywood, import duty 10 c. Sawn Timber ; import duty 0 - 5 d. Moulding ; import duty 5 3-3 Institutions that issue approval of the products Minister of Trade cq. Director General of International Trade Jl. MI Ridwan Rais No. 5 Jakarta Pusat PhoneFax : 62 21 385 8204 Email : dmaulida2001yahoo.com Question 4: Conformity Assessment Body There are responsible bodies dealing with the conformity assessment approval certificate. Please provide the information on the following: 4-1 Name of accreditation body, its scope, and position on the MLA Multilateral Recognition Arrangements or MRA Mutual Recognition Arrangements. KAN National Accreditation Body of Indonesia co : Manggala Wanabakti Building Block IV, 4 th Floor Jl. Jend. Gatot Subroto, Senayan, Jakarta Pusat, INDONESIA Contact Person for Accreditation of Laboratories : Ms. Setyodewati Phone : 6221 574 7043-4 ext 161 Fax : 6221 574 7045 - 10 - Email : laboratoriumbsn.or.id Contact Person for Accreditation of Certification institutions : Mr. Suprapto Phone : 6221 574 7043-4 ext 126 Fax : 6221 574 7045 Email : sertifikasibsn.or.id KAN as the only one of accreditation body operated in Indonesia with the scope of accreditation on the following aspects: • Testing laboratories • Calibration laboratories • Inspection Bodies • Certification Bodies, in the certification scheme of QMS ISO 9000 series, EMS ISO 14000 series, HACCP, Product, Personnel and Ecolabel. Up to now, KAN is members of signatories of MRAMLA PACIAF in the field of Quality Management System QMS, Environment Management System EMS and HACCP System. KAN also signatories of MRAMLA APLACILAC in the field of calibration laboratories and testing laboratories. In the field of inspection bodies, KAN is signatories of MRA APLAC. 4-2 Name of certification bodies, its scope and position on the MLAMRA. Please refer to BSN’s website http:www.bsn.or.id in the icon of accredited conformity assessment bodies, Sub clause : certification bodies. 4-3 Name of testing laboratories, its scope and position on the MLAMRA. Please refer to BSN’s website http:www.bsn.or.id in the icon of accredited conformity assessment bodies, Sub clause : testing laboratories. Thank you for your full cooperation. 1 TRA NSPA RENC Y O F WO O D A ND WO O D BA SED PRO DUC TS STA NDA RDS, TEC HNIC A L REG ULA TIO NS A ND C O NFO RMITY A SSESSMENT PRO C EDURES Q UESTIO N 1 Existing Sta nd a rd o n Wo o d - b a se d se c to r I. Pa ne l p ro d uc ts No Pro d uc t C a te g o ry Sta nd a rd C o d e b y Ite m Title o f Sta nd a rd s Re fe re nc e Sta tus o f a d o p tio n IDT MO D NEQ Sta tus o f Im p le m e nta tio n 1 2 3 4 5 6 7 1. Plyw o o d MS 228: 1991 Sp e c ific a tio n fo r Plywo o d n.a n.a Vo lunta ry 2. Wo o d Ba se d Pa ne l MS 471: Pa rt 2: 2003 G lo ssa ry O f Te rms Re la ting To Timb e r And Wo o d -b a se d Pa ne l Pro d uc ts Pa rt 2: Wo o d -b a se d Pa ne l Pro d uc ts BS 6100 : 1992 G lo ssa ry o f b uild ing a nd c ivil e ng ine e ring te rms n.a Vo lunta ry 3. Wo o d Ba se d Pa ne l MS 471: Pa rt 3: 2003 G lo ssa ry O f Te rms Re la ting To Timb e r And Wo o d -b a se d Pa ne l Pro d uc ts Pa rt 3 : C a rp e ntry, Jo ine ry And Furniture BS 6100 : 1992 G lo ssa ry o f b uild ing a nd c ivil e ng ine e ring te rms: Pt 4: Fo re st p ro d uc ts n.a Vo lunta ry 4. Wo o d Ba se d Pa ne l MS 544: 2001 C o d e o f Pra c tic e fo r The Struc tura l Use O f Timb e r Pa rt 4 : Timb e r p a ne l p ro d uc ts BS 373 Me tho d s o f te sting sma ll c le a r sp e c ime ns o f timb e r BS 1579 n.a Vo lunta ry 2 Se c tio n 1 : Struc tura l p lyw o o d Se c tio n 2 : Ma rine p lyw o o d Se c tio n 3 : C e me nt b o nd e d p a rtic le b o a rd Se c tio n 4 : O rie nte d stra nd b o a rd Pa rt12 : La mina te d ve ne e r lumb e r fo r struc tura l a p p lic a tio n C o nne c to rs fo r timb e r A STM D143 Sta nd a rd me tho d s o f te sting sma ll c le a r sp e c ime ns o f timb e r BS 4169 : 1970 G lue d la mina te d timb e r struc tura l me mb e rs BS 5669 :1984 Pa rtic le b o a rd Pa rt 1 a nd Pa rt 2 ISO 8335 : 1987 C e me nt-b o nd e d p a rtic le b o a rd - Bo a rd s o f Po rtla nd o r e q uiva le nt c e me nt re info rc e d with fib ro us w o o d p a rtic le s BS EN 310 Wo o d -b a se d p a ne ls. De te rmina tio n o f mo d ulus o f e la stic ity in b e nd ing a nd o f b e nd ing stre ng th BS EN 319 Pa rtic le b o a rd s a nd fib re b o a rd s – De te rmina tio n o f te nsile stre ng th p e rp e nd ic ula r to the p la ne o f the b o a rd . BS EN 317 Pa rtic le b o a rd s a nd fib re b o a rd s – De te rmina tio n o f swe lling in thic kne ss a fte r imme rsio n in w a te r 3 BS 6566: Pa rt 6 : 1985 Plywo o d BS 6399: Pa rt 1 : 1984 C o d e o f p ra c tic e fo r d e a d a nd imp o se d lo a d 5. Plyw o o d MS 908: 1984 Sp e c ific a tio n Fo r Synthe tic Re sin Ad he sive s Phe no lic And Amino p la stic Fo r Plywo o d BS 1203 : 1979 Synthe tic re sin a d he sive s fo r p lyw o o d IS 848 : 1957 Synthe tic re sin a d he sive s fo r p lyw o o d A S K88 : 1952 Synthe tic re sin a d he sive s fo r p lyw o o d A STM D1490- 67 Sta nd a rd te st me tho d fo r no n-vo la tile c o nte nt o f ure a -fo rma ld e hyd e re sin so lutio ns n.a Vo lunta ry 6. Wo o d c e me nt b o a rd MS 934: 1986 Sp e c ific a tio n Fo r Wo o d C e me nt Bo a rd s BS 476 Fire te sts o n b uild ing ma te ria ls a nd struc ture s BS 1210 Wo o d sc re ws n.a Vo lunta ry 7. Pa rtic le b o a rd MS 1036: 1986 Sp e c ific a tio n Fo r Wo o d C hip b o a rd And Me tho d O f Te st Fo r Pa rtic le b o a rd und e r re visio n - WBP : Pa rtic le b o a rd Sp e c s ISO 16998 : 2003 Wo o d -Ba se d Pa ne ls : De te rmina tio n o f Mo isture Re sista nc e – Bo il Te st BS 5669 :1979 Wo o d c hip b o a rd a nd me tho d s o f te st fo r p a rtic le b o a rd n.a Vo lunta ry 4 8. Blo c kb o a rd La minb o a rd MS 1123: 1988 Sp e c ific a tio n Fo r Blo c kb o a rd And La minb o a rd BS 3444 : 1972 Sp e c ific a tio n fo r b lo c kb o a rd a nd la minb o a rd n.a Vo lunta ry 9. Wo o d -b a se d p a ne ls MS 1429: 1998 Sp e c ific a tio n Fo r Me d ium De nsity Fib re b o a rd s MDF und e r re visio n – WBP : Fib re b o a rd Sp e c ific a tio ns ISO 17064 : 2003 Fib re b o a rd , Pa rtic le b o a rd O SB – De finitio n Te rmino lo g y n.a Vo lunta ry 10. Wo o d -b a se d p a ne ls MS 1786: 2005 Wo o d -b a se d p a ne ls – Fire b o a rd , p a rtic le b o a rd a nd o rie nte d stra nd b o a rd – Te rmino lo g y ISO 17064 : 2003 Fib re b o a rd , p a rtic le b o a rd a nd O SB – De finitio ns a nd te rmino lo g y n.a Vo lunta ry 11. Wo o d -b a se d p a ne ls MS 1787: Pa rt 1: 2005 Wo o d -b a se d p a ne ls – Pa rt 1: De te rmina tio n o f d ime nsio ns o f p a ne ls ISO 9426 : 2003 Wo o d -b a se d p a ne ls – De te rmina tio n o f d ime nsio ns o f p a ne ls n.a Vo lunta ry 12. Wo o d -b a se d p a ne ls MS 1787: Pa rt 2: 2005 Wo o d -b a se d p a ne ls – Pa rt 2: Sa mp ling a nd c utting o f te st p ie c e s ISO 16999: 2003 Wo o d -b a se d p a ne ls – Sa mp ling a nd c utting o f te st p ie c e s. n.a Vo lunta ry 13. Wo o d -b a se d p a ne ls MS 1787: Pa rt 3: 2005 Wo o d -b a se d p a ne ls – Pa rt 3: De te rmina tio n o f d ime nsio ns o f te st p ie c e s ISO 9424: 2003 Wo o d -b a se d p a ne ls – De te rmina tio n o f d ime nsio ns o f te st p ie c e s. n.a Vo lunta ry 5 14. Wo o d -b a se d p a ne ls MS 1787: Pa rt 4: 2005 Wo o d -b a se d p a ne ls – Pa rt 4: De te rmina tio n o f mo isture c o nte nt ISO 16979: 2003 Wo o d -b a se d p a ne ls – De te rmina tio n o f mo isture c o nte nt. n.a Vo lunta ry 15. Wo o d -b a se d p a ne ls MS 1787: Pa rt 5: 2005 Wo o d -b a se d p a ne ls – Pa rt 5: De te rmina tio n o f d e nsity ISO 9427: 2003 Wo o d -b a se d p a ne ls – De te rmina tio n o f d e nsity n.a Vo lunta ry 16. Wo o d -b a se d p a ne ls MS 1787: Pa rt 6: 2005 Wo o d -b a se d p a ne ls – Pa rt 6: De te rmina tio n o f swe lling in thic kne ss a fte r imme rsio n in Wa te r ISO 16983: 2003 Wo o d -b a se d p a ne ls – De te rmina tio n o f swe lling in thic kne ss a fte r imme rsio n in w a te r. n.a Vo lunta ry 17. Wo o d -b a se d p a ne ls MS 1787: Pa rt 7: 2005 Wo o d -b a se d p a ne ls – Pa rt 7: De te rmina tio n o f d ime nsio na l c ha ng e s a sso c ia te d with c ha ng e s in re la tive humid ity ISO 16985: 2003 Wo o d -b a se d p a ne ls – De te rmina tio n o f d ime nsio na l c ha ng e s a sso c ia te d with c ha ng e s in re la tive humid ity n.a Vo lunta ry 18. Wo o d -b a se d p a ne ls MS 1787: Pa rt 8: 2005 Wo o d -b a se d p a ne ls – Pa rt 8: De te rmina tio n o f mo isture re sista nc e und e r c yc lic te st c o nd itio ns ISO 16987: 2003 Wo o d -b a se d p a ne ls – De te rmina tio n o f mo isture re sista nc e und e r c yc lic te st c o nd itio ns ISO 16983: 2003 Wo o d -b a se d p a ne ls – De te rmina tio n o f swe lling in thic kne ss a fte r imme rsio n in w a te r. n.a Vo lunta ry 6 ISO 16978: 2003 Wo o d -b a se d p a ne ls – De te rmina tio n o f mo d ulus o f e la stic ity in b e nd ing a nd o f b e nd ing stre ng th. ISO 16984: 2003 Wo o d -b a se d p a ne ls – De te rmina tio n o f te nsile stre ng th p e rp e nd ic ula r to the p la ne o f the p a ne l 19. Wo o d -b a se d p a ne ls MS 1787: Pa rt 9: 2005 Wo o d -b a se d p a ne ls – Pa rt 9: De te rmina tio n o f surfa c e so und ne ss ISO 16981: 2003 Wo o d -b a se d p a ne ls – De te rmina tio n o f surfa c e so und ne ss n.a Vo lunta ry 20. Wo o d -b a se d p a ne ls MS 1787: Pa rt 10: 2005 Wo o d -b a se d p a ne ls – Pa rt 10: De te rmina tio n o f mo d ulus e la stic ity in b e nd ing a nd o f b e nd ing stre ng th ISO 16978: 2003 Wo o d -b a se d p a ne ls – De te rmina tio n o f mo d ulus o f e la stic ity in b e nd ing a nd o f b e nd ing stre ng th. n.a Vo lunta ry 21. Wo o d -b a se d p a ne ls MS 1787: Pa rt 11: 2005 Wo o d -b a se d p a ne ls – De te rmina tio n o f te nsile stre ng th p e rp e nd ic ula r to the p la ne o f the p a ne l ISO 16984: 2003 Wo o d -b a se d p a ne ls – De te rmina tio n o f te nsile stre ng th p e rp e nd ic ula r to the p la ne o f the p a ne l n.a Vo lunta ry 22. Wo o d -b a se d p a ne ls MS 1787: Pa rt 12: 2005 Wo o d -b a se d p a ne ls – Pa rt 12: De te rmina tio n o f we t b e nd ing stre ng th ISO FDIS 20585 Wo o d -b a se d p a ne ls – De te rmina tio n o f we t b e nd ing stre ng th a fte r imme rsio n in wa te r a t 70 ° C o r b o iling te mp e ra ture n.a Vo lunta ry 7 JA NS 20 Wo o d -b a se d p a ne ls – De te rmina tio n o f we t b e nd ing stre ng th a fte r imme rsio n in wa te r a t 70 ° C o r b o iling te mp e ra ture 23. Wo o d -b a se d p a ne ls MS 1787: Pa rt 13: 2005 Wo o d -b a se d p a ne ls – Pa rt 13: De te rmina tio n o f sc re w ho ld ing a b ility ISO 1478: 1999 Ta p p ing sc re w thre a d n.a Vo lunta ry 24. Wo o d -b a se d p a ne ls MS 1787: Pa rt 14: 2005 Wo o d -b a se d p a ne ls – Pa rt 14: De te rmina tio n o f fo rma ld e hyd e c o nte nt b y p e rfo ra to r me tho d n.a Vo lunta ry 25. Wo o d -b a se d p a ne ls MS 1787: Pa rt 15: 2005 Wo o d -b a se d p a ne ls – Pa rt 15: De te rmina tio n o f fo rma ld e hyd e e missio n – De ssic a to r me tho d n.a Vo lunta ry 8

II. Sa wn Tim b e r