LKS 2017 TP16 XXIV HD EN
Test Project for skill 16 LKS_2017_TP16_XXV_HD_EN
Version:1.0 Date:20.10.2016
1 of 12
www.inaskills-electronics.com
Hardware Design
Test Project document
LKS_2017_TP16_XXV_HD_EN
Submitted by:Name : ASC WSC Team Member : Ina skills Electronics Type : Close Project
(2)
Test Project for skill 16 LKS_2017_TP16_XXV_HD_EN
Version:1.0 Date:20.10.2016
2 of 12
www.inaskills-electronics.com
Point : 25 Points
Contents
This Test Project proposal consists of the following documentation and files: 1. LKS_2017_TP16_XXV_EN.doc
Introduction
This Hardware Design Project will access each competitor’s skill and capacity.
1. Competitor can design a circuit of product based on the given drawing and instruction. 2. Competitor can design Printed Circuit Board using Altium Designer CAD tool.
3. Competitor can complete his product with enough functions.
Description of project and tasks
a. Circuit Design and Schematic Capture (Time limit: 2 hrs, 1st day)
You are to complete 4 designs. Please complete the designs according to the
requirements. Use only components from the parts list for your designs. You may not need all the components in the parts list.
Competitors can’t use simulation tool.
Competitors can read component data sheet that is provided with only personal computer which contains Data sheet pack. The data sheet pack should be provided
by Committee. The hard copies brought by competitor can’t be used, but competitors
can read the hard copies provided with committee. When you have completed your designs you are to submit your answers on the provided Answer Sheets to the expert.
You cannot do this until the 1st hour has passed. You will then be given the schematic
solution for schematic entry into Altium. You cannot start your PCB design in this phase of the test project.
b. Design of Printed Circuit Board (Time limit: 2 hrs)
Design printed circuit board of PCB using Altium Designer CAD tool.
Complete the designs, save PCB Gerber file in the Network Drive
Please use track widths of 0.4 mm minimum for signal and 0.7 mm minimum for power
and a clearance of 0.3mm minimum
Minimum pad size
Type Ukuran pada Pad Ukuran Lubang Bor
IC DIP 1.5 mm 0.8mm
Resistor 1.8 mm 0.8mm
(3)
Test Project for skill 16 LKS_2017_TP16_XXV_HD_EN
Version:1.0 Date:20.10.2016
3 of 12
www.inaskills-electronics.com
Header T Block 2 mm 1.2 mm
Board dimension of 100 x 160 +/- 0.2mm is to be used
You are to place the components following request jury
c.
Build and Test Hardware design project (Time limit: 2.0 Hr) Assemble PCB, and check its operation.
Completing the project, submit all the product and documents.
Instructions to the competitor
The task in this project is to design and make an electronic thermometer using the integrated circuit LM234 to run and control the speed of a motor, which can be used as a cooling system of any devices. Below 40ºC the motor is off, when the temperature exceeds 40ºC the motor starts running. As the temperature rises the speed of the motor increases. Buzzer on if temperature more then 100ºC. Moreover, the temperature is to be shown by a LED indicator and seven segment (from 0ºC to 100ºC).
(4)
Test Project for skill 16 LKS_2017_TP16_XXV_HD_EN
Version:1.0 Date:20.10.2016
4 of 12
www.inaskills-electronics.com
Parts List
No.
Qty.
Value / Tipe Part
Information
1
1
R. 68 Ohm
Resistor ¼ W 1%
2
11
R. 220 Ohm
Resistor ¼ W 1%
3
7
R. 330 Ohm
Resistor ¼ W 1%
4
12
R. 1K Ohm
Resistor ¼ W 1%
5
1
R. 10K Ohm
Resistor ¼ W 1%
6
2
R. 12K Ohm
Resistor ¼ W 1%
7
1
R. 15K Ohm
Resistor ¼ W 1%
8
1
R. 18K Ohm
Resistor ¼ W 1%
9
2
R. 20K Ohm
Resistor ¼ W 1%
10
10
C. 100 nF
Capasitor MKM
11
1
C. 4,7 uF
Capasitor Electrolit
12
1
C. 6,8 uF
Capasitor Electrolit
13
1
C. 10 uF
Capasitor Electrolit
14
2
C. 100 uF
Capasitor Electrolit
15
1
D. 1N4007
Dioda 1 Ampere
16
1
Tr. C9013
Transistor NPN
17
1
Tr. TIP 41C
Transistor NPN
18
10
Led. Red 3mm
Led Red 3mm
19
1
Led. Green 3mm
Led Green 3mm
20
1
Ds. 7 Seg. 41056
Seven Segment CA 0,56”
21
1
Ic. Ne 555
IC Pulse Generator
22
1
Ic. SN 74LS04
IC Gate Not
23
2
Ic. SN 74LS08
IC Gate And
24
1
Ic. SN 74LS42
IC Logic Decoder Demux
25
1
Ic. SN 74LS47
IC Logic Decoder BCD
26
1
Ic. SN 74LS147
IC Logic Encoder
27
1
Ic. L 7805
IC Regulator 5 V
28
3
Ic. LM 324
IC Op-Amp
29
1
Ic. LM 35
IC Temperatur Sensor
30
3
Soket IC 16 Pin
Soket IC
31
6
Soket IC 14 Pin
Soket IC
32
1
Soket IC 8 Pin
Soket IC
33
1
Buzzer 5 V
Buzzer 5 V
34
1
Fan 12Vdc
Fan 12V 8x8cm
35
1
Soket Molek 2 Pin
Soket Molek
36
1
Header Molek 2 Pin
Header Molek
37
1
Terminal Block 2 Pin
Terminal Block
(5)
Test Project for skill 16 LKS_2017_TP16_XXV_HD_EN
Version:1.0 Date:20.10.2016
5 of 12
www.inaskills-electronics.com
No.
Qty.
Value / Tipe Part
Information
39
20 Cm
Wire Black Awg 22
Wire Black Awg 22
40
100 Cm
Lead 0,8 mm
Lead 0,8 mm
41
4
Spiser 1 Cm Hexagonal
Spiser 1 Cm Hexagonal
42
1
PCB 16x10 Cm Plain
PCB 16x10 cm Plain
(6)
Test Project for skill 16 LKS_2017_TP16_XXV_HD_EN
Version:1.0 Date:20.10.2016
6 of 12
www.inaskills-electronics.com
OTHERS
Answer Sheet
Competitor Code Competitor Table No. Approval by Jury
ASSIGNED NO. / CODE
To be written by Juri for Marking purpose
(7)
Test Project for skill 16 LKS_2017_TP16_XXV_HD_EN
Version:1.0 Date:20.10.2016
7 of 12
www.inaskills-electronics.com #DESIGN 1
(8)
Test Project for skill 16 LKS_2017_TP16_XXV_HD_EN
Version:1.0 Date:20.10.2016
8 of 12
www.inaskills-electronics.com #DESIGN 2
(9)
Test Project for skill 16 LKS_2017_TP16_XXV_HD_EN
Version:1.0 Date:20.10.2016
9 of 12
www.inaskills-electronics.com #DESIGN 3
(10)
Test Project for skill 16 LKS_2017_TP16_XXV_HD_EN
Version:1.0 Date:20.10.2016
10 of 12
www.inaskills-electronics.com #DESIGN 4
(11)
Test Project for skill 16 LKS_2017_TP16_XXV_HD_EN
Version:1.0 Date:20.10.2016
11 of 12
www.inaskills-electronics.com
(12)
Test Project for skill 16 LKS_2017_TP16_XXV_HD_EN
Version:1.0 Date:20.10.2016
12 of 12
www.inaskills-electronics.com
Datasheet on desktop
SELAMAT BERLATIH !!!
Akan dilakukan revisi kisi kisi:
(1)
Test Project for skill 16
LKS_2017_TP16_XXV_HD_EN Version:1.0 Date:20.10.2016 www.inaskills-electronics.com7 of 12
#DESIGN 1
(2)
Test Project for skill 16
LKS_2017_TP16_XXV_HD_EN Version:1.0 Date:20.10.2016 www.inaskills-electronics.com8 of 12
#DESIGN 2
(3)
Test Project for skill 16
LKS_2017_TP16_XXV_HD_EN Version:1.0 Date:20.10.2016 www.inaskills-electronics.com9 of 12
#DESIGN 3
(4)
Test Project for skill 16
LKS_2017_TP16_XXV_HD_EN Version:1.0 Date:20.10.2016 www.inaskills-electronics.com10 of 12
#DESIGN 4
(5)
Test Project for skill 16
LKS_2017_TP16_XXV_HD_EN Version:1.0 Date:20.10.2016 www.inaskills-electronics.com11 of 12
(6)
Test Project for skill 16
LKS_2017_TP16_XXV_HD_EN Version:1.0 Date:20.10.2016 www.inaskills-electronics.com12 of 12