TUR K
Highlights
from the latest product introductions
T-Max® P, ISO S geometries
A complete series of new geometries for productive
turning of HRSA and titanium alloys with low tool pressure
and chip control in focus.
See General turning chapter
Grade GC1115
A strong PVD grade with a good balance of wear
resistance and toughness. It offers true versatility for
heat resistant super alloys (HRSA) and stainless steel
materials with the highest production security.
See General turning chapter
Advanced materials
A largely expanded area with new grades – CB7035,
CB7525, CB7925, CC6190 – and a number of new tools
and inserts to take advanced cutting materials into new
areas.
See General turning chapter, page A65
1
Highlights
from the latest product introductions
Grade GC1145
New parting and grooving grade dedicated to toughnessdemanding operations. Resists chipping and runs for a
longer time in cut.
See Parting and Grooving chapter
CoroCut® M and R size
Larger CoroCut inserts and holders for wider grooves up
to .590 inch (15 mm), giving improved performance and
metal removal in heavy duty grooving.
New insert geometries complement the current
assortment.
CoroCut® 3
RS geometry: full radii inserts for grooving and profiling
CS geometry: available in more front angles for pip- and
burr free parting off
GC geometry: flat top, flat bottom grooving geometry.
See Parting and Grooving chapter
QS holding system with high
pressure coolant (HP)
Combining the quick change capability of the QS holding
system with high pressure coolant – a first for sliding
head machines. QS HP provides problem-free production
and improved component quality in the most demanding,
long-chipping materials.
See Small Part Machining section in General Turning
chapter
2
Highlights
from the latest product introductions
CoroTurn SL70 with high
pressure coolant
Standard blades and adapters provide added reach for
profiling and pocketing.
See CoroTurn SL chapter
CoroThread® 266
GC1135 is a new threading grade for CoroThread® 266.
It is universal to fit mixed production in all materials,
optimized for on stainless steels and heat resistant super
alloys.
See Threading chapter
Coromant Capto Disc Interface
CDI, the quick-change tooling interface for turning
centers, is now available as standard.
See Tooling System chapter
3
What’s new?
The catalog is now split into two parts - Turning tools and Rotating tools - and both parts include the latest releases from CoroPak 11.1.
Turning tools
A GENERAL TURNING
B PARTING AND GROOVING
C THREADING
G TOOLING SYSTEMS (For non-rotating tools)
H MULTI-TASK MACHINING
I CoroTurn® SL (New chapter, see below)
J GENERAL INFORMATION
Rotating tools
D MILLING
E DRILLING
F BORING
G TOOLING SYSTEMS (For rotating tools)
J GENERAL INFORMATION
New chapter in the Turning tools catalog
All CoroTurn® SL products, including cutting heads for General Turning,
Parting and Grooving and Threading are now presented in the same
chapter as CoroTurn® SL adapters.
4
GENERAL TURNING
Inserts
External machining
Internal machining
Cartridges for special tools
A
A3
A89
A235
A329
PARTING AND GROOVING
B
THREADING
C
TOOLING SYSTEMS
G
MULTI-TASK MACHINING
H
CoroTurn® SL
I
GENERAL INFORMATION
J
Alphanumeric index
J14
5
from the latest product introductions
T-Max® P, ISO S geometries
A complete series of new geometries for productive
turning of HRSA and titanium alloys with low tool pressure
and chip control in focus.
See General turning chapter
Grade GC1115
A strong PVD grade with a good balance of wear
resistance and toughness. It offers true versatility for
heat resistant super alloys (HRSA) and stainless steel
materials with the highest production security.
See General turning chapter
Advanced materials
A largely expanded area with new grades – CB7035,
CB7525, CB7925, CC6190 – and a number of new tools
and inserts to take advanced cutting materials into new
areas.
See General turning chapter, page A65
1
Highlights
from the latest product introductions
Grade GC1145
New parting and grooving grade dedicated to toughnessdemanding operations. Resists chipping and runs for a
longer time in cut.
See Parting and Grooving chapter
CoroCut® M and R size
Larger CoroCut inserts and holders for wider grooves up
to .590 inch (15 mm), giving improved performance and
metal removal in heavy duty grooving.
New insert geometries complement the current
assortment.
CoroCut® 3
RS geometry: full radii inserts for grooving and profiling
CS geometry: available in more front angles for pip- and
burr free parting off
GC geometry: flat top, flat bottom grooving geometry.
See Parting and Grooving chapter
QS holding system with high
pressure coolant (HP)
Combining the quick change capability of the QS holding
system with high pressure coolant – a first for sliding
head machines. QS HP provides problem-free production
and improved component quality in the most demanding,
long-chipping materials.
See Small Part Machining section in General Turning
chapter
2
Highlights
from the latest product introductions
CoroTurn SL70 with high
pressure coolant
Standard blades and adapters provide added reach for
profiling and pocketing.
See CoroTurn SL chapter
CoroThread® 266
GC1135 is a new threading grade for CoroThread® 266.
It is universal to fit mixed production in all materials,
optimized for on stainless steels and heat resistant super
alloys.
See Threading chapter
Coromant Capto Disc Interface
CDI, the quick-change tooling interface for turning
centers, is now available as standard.
See Tooling System chapter
3
What’s new?
The catalog is now split into two parts - Turning tools and Rotating tools - and both parts include the latest releases from CoroPak 11.1.
Turning tools
A GENERAL TURNING
B PARTING AND GROOVING
C THREADING
G TOOLING SYSTEMS (For non-rotating tools)
H MULTI-TASK MACHINING
I CoroTurn® SL (New chapter, see below)
J GENERAL INFORMATION
Rotating tools
D MILLING
E DRILLING
F BORING
G TOOLING SYSTEMS (For rotating tools)
J GENERAL INFORMATION
New chapter in the Turning tools catalog
All CoroTurn® SL products, including cutting heads for General Turning,
Parting and Grooving and Threading are now presented in the same
chapter as CoroTurn® SL adapters.
4
GENERAL TURNING
Inserts
External machining
Internal machining
Cartridges for special tools
A
A3
A89
A235
A329
PARTING AND GROOVING
B
THREADING
C
TOOLING SYSTEMS
G
MULTI-TASK MACHINING
H
CoroTurn® SL
I
GENERAL INFORMATION
J
Alphanumeric index
J14
5