Pengaruh Penambahan Bentonit Termodifikasi Sebagai Pengisi Terhadap Sifat Mekanik dan Penyerapan Air Pada Komposit Epoksi

DAFTAR PUSTAKA

[1]

Othman,

Nadras.

“Characterisation

and

Properties

of

Bentonite/Polyprophylene Composite”. Universiti Sains Malaysia. 2007
[2]

Rosyadi, Iim Imron, Ahmad Mudzakir dan Budiman Anwar. “Preparasi dan
Karakterisasi

Bentonit

Termodifikasi

Surfaktan

Kationik

Fatty

Imidazolinium”. Jurnal Sains dan Teknologi Kimia , ISSN 2087-7412, Vol.
1, No. 2, Hal. 112-120. 2010.
[3]

Chitraningrum,

Nidya.

“Sifat

Mekanik dan Termal Pada Bahan

Nanokomposit Epoxy-Clay Tapanuli”. Tugas Akhir, Program Sarjana
Universitas Indonesia, Depok. 2008.
[4] Anandhan, S., dan S. Bandyopadhyay. “Polymer Nanocomposites : From
Synthesis to Applications”. 2011.
[5]

Boyle, Maureen A., Cary J. Martin, John D. Neuner. “Epoxy Resins”. 2006.

[6]

Syuhada, Rachmat Wijaya, Jayatin, dan Saeful Rohman. “Modifikasi
Bentonit (Clay) Menjadi Organoclay Dengan Penambahan Surfaktan”.
Jurnal Nanosains & Nanoteknologi, ISSN 1979-0880, Vol. 2, No. 1, Hal.

48-51. 2009.
[7]

Ataiwi, Ali H. dan Alaa A. Abdul-Hamead. “Preparing Polyester-Bentonite
Clay Nano Composite and Study Some of Its Mechanical Properties”.
Emirates Journal for Engineering Research. Vol. 17 (1), Hal. 57-61. 2012.

[8]

Bukit, Nurdin, Erna Frida dan Mukti Hamjah Harahap. “Preparation
Natural Bentonite in Nano Particle Material as Filler Nanocomposite High
Density Poliethylene (Hdpe)”. Chemistry and Materials Research. ISSN
2224-3224, Vol. 3, No. 13, Hal. 10-20. 2013.

[9]

Oroh, Jonathan, Frans. P. Sappu dan Romels Lumintang. “Analisis Sifat
Mekanik Material Komposit Dari Serat Sabut Kelapa. Universitas Sam
Ratulangi Manado. 2013.

[10] Turnip, Rimbun. “Penggunaan Komposit Epoksi Berpenguat Serat Kevlar
Sebagai Bahan Alternatif Mengatasi Kebocoran Pipa”. Tesis. Teknologi
Metalurgi dan Material Universitas Indonesia. Depok. 2010.

39
Universitas Sumatera Utara

[11] Jones,R. M. “Mechanics of Composite Materials”. Second Edition. Taylor
& Francis : USA. 1999.
[12] Schwartz, M. M,. “Composite Materials Handbook”. McGraw Hill Book
Company : New York. 1984
[13] Barleany, Dhena Ria, Rudi Hartono dan Santoso. “Pengaruh Komposisi
Montmorillonite pada Pembuatan Polipropilen – Nanokomposit Terhadap
Kekuatan Tarik dan Kekerasannya”. Pengembangan Teknologi Kimia
untuk Pengolahan Sumber Daya Alam Indonesia. ISSN 1693 – 4393. Hal.
D03-1 – D03-6. 2011.
[14] Juliani, Evi. “Aktivasi Bentonit Alam Sebagai Bahan Pengisi Pada
Komposit Polietilen/High Density Polyethyline (HDPE)

Untuk Bahan

Teknik. Tesis. Program Pascasarjana FMIPA USU. 2013.
[15] Motawie, M.A., N.M. Ahmed., S.M.ElMessallamy., E.M. Sadek.,

N.G.Kandile.

2014.

“Unsaturated

Polyesters

/

Layered

Nanocomposites : Synthesis and Characterization”. IOSR

Silicate

Journal of

Applied Chemistry. Volume 7, Issue 10. PP 34-43. 2014.

[16] Ramimoghadam, Donya, Mohd Zobir Bin Hussein and Yun Hin TaufiqYap.

“

The

Effect

of

Sodium

Dodecyl

Sulfate

(SDS)

and

Cetyltrimethylammonium Bromide (CTAB) on the Properties of ZnO
Synthesized by Hydrothermal Method”. International Journal of Molecular
Sciences. ISSN 1422-0067. 13. Hal. 13275-13293. 2012

[17] Nakahara, Hiromichi, Osamu Shibata dan Yoshikiyo Moroi. “Examination
of Surface Adsorption of Cetyltrimethylammonium Bromide and Sodium
Dodecyl Sulfate”. The Journal of Physical Chemistry B. 115. Hal. 90779086. 2011
[18] Seema, Mohammadi H., Apporva M A, R. Ravishankar. “Effect of
Surfactants On The Electrodeposited Nickel Composite Coatings.
International Journal of Technical Research and Applications. e-ISSN
2320-8163. Vol. 3, Issue 4. PP. 398-406. 2015
[19] Tan, Shun, Qiuxia Wu, Jia Wang, Yanli Wang, Xiaolei Liu, Keke Sui,
Xiaoyong Deng, Haifang Wu, dan Minghong Wu. “Dynamic SelfAssembly Synthesis and Controlled Release as Drug Vehicles of Porous

40
Universitas Sumatera Utara

Hollow Silica Nanoparticles”. Microporous and Mesoporous Materials.
142. Hal 601-608. 2011.
[20] Indahwahyuni, Fithri. “Pembuatan dan Karakterisasi Nanokomposit Karet

Alam/Organobentonit Menggunakan Cetiltrimetilammonium Bromida,
Polietilen Glikol dan Sodium Dodesil Sulfat Sebagai Pemodifikasi
Permukaan”. Tesis. FMIPA USU. 2013.
[21] Balebat, Tandang. “Pengaruh Penggunaan Bentonit Termodifikasi Fatty
Imidazolinium Pada Struktur Mikro dan Karakter Mekanis Nanokomposit
Polietilena-Organobentonit”. Skripsi. FMIPA Universitas Pendidikan
Indonesia. 2011.
[22] Selvin, Thomas P., Joseph Kuruvilla, Thomas Sabu. “Mechanical
Properties of Titanium Dioxide-Filled Polystyrene Microcomposites”.
Materials Letters 58. Hal 281-289. 2004.
[23] Faisal, Tengku, Z. H,. “Pengaruh Modifikasi Kimia Terhadap Sifat-sifat
Komposit Polietilena Densitas Rendah (LDPE) Terisi Tempurung Kelapa”.
Tesis Magister, Sekolah Pascasarjana USU. Medan. 2008.
[24] Callister, W.D,. “Material Science and Engineering”. Seventh Edition. John
Wiley & Sons, Inc: Singapore. 2007
[25] Lokantara, P., Suardana, N.P.G,. “Studi Perlakuan Serat Serta Penyerapan
Air Terhadap Kekuatan Tarik Komposit Tapis Kelapa/Polyester”. Jurnal
Ilmiah Teknik Mesin Cakra. Vol. 3. No. 1. Hal. 49-56. 2009.
[26] Hirmawan, Buyung, Lizda J.M, Doty D.R. “Sifat Mekanik Komposit Serat
Bambu Akibat Pengaruh Musim Hujan Dengan/Tanpa Pelapisan”. FTI ITS.

2011.
[27] Sitorus, A., “Penyediaan Film Mikrokomposit PVC Menggunakan
Pemlastis Stearin dengan Pengisi Pati dan Penguat Serat Alam”. Tesis
Magister, Program Pascasarjana USU, Medan. 2009.
[28] Sunariyo, “Karakteristik Komposit Termoplastik Polipropilena Dengan
Serat Sabut Kelapa Sebagai Pengganti Bahan Palet Kayu”. Tesis Magister,
Sekolah Pascasarjana. USU. Medan. 2008.

41
Universitas Sumatera Utara

[29] Azeez, Asif Abdul, Kyong Yop Rhee, Soo Jin Park, dan David Hui. “Epoxy
Clay Nanocomposites – processing, properties and applications : A
review”. Composites : Part B. 2012.
[31] Aková E.I., "Development of Natural Fiber Reinforced Polymer
Composites". Trenčianska univerzita A.Dubčeka v Trenčíne, Pri Parku 19,
911 06 Trenčín, Slovakia.
[32] MSDS, 2013. Material Safety Data Sheet. West System.
[33] MSDS, 2013. Material Safety Data Sheet Bentonite MSDS.
[34] MSDS, 2013. Material Safety Data Sheet Titanium Dioxide MSDS.

[35] MSDS, 2002. Material Safety Data Sheet General Purpose Epoxy
Hardener .

[36] MSDS, 2013. Material Safety Data Sheet Cetyltrimethylammonium
Bromide MSDS.

[37] Rittirong, Kajonpop, Suvit Uasopon, Paveena Prachayawasin, Nukul
Euaphantasate, Kamon Aiempanakit, dan Sarute Ummartyotin. “CTAB as a
Soft Template for Modified Clay as Filler in Active Packaging”. Data in
Brief 3. Hal. 47-50. 2015

[38] Agil, Safarudin, Yeremias M. Pell, Wenseslaus Bunganaen. “Pengaruh
Fraksi Volume Terhadap Sifat Mekanik Komposit Widuri-Polyester”.
Fakultas Teknik Universitas Nusa Cendana. 2013
[39] Suwanto, Bodja. “Pengaruh Temperatur Post-Curing Terhadap Kekuatan
Tarik Komposit Epoksi Resin yang Diperkuat Woven Serat Pisang”. eJurnal Wahana. 2009.
[40] Jalal, R., “Pembuatan Komposit Polipropilena Dengan Penguat Serat
Polipropilena Terorientasi dan Bahan Pengikat Anhidrida Maleat”. Tesis
Magister, Sekolah Pascasarjana USU. Medan. 2005
[41] Hartanto, L., “Study Perlakuan Alkali dan Fraksi Volume Serat Terhadap

Kekuatan Bending, Tarik, dan Impak Komposit Berpenguat Serat Rami
Bermatrik Polyester BQTN 157”. Tugas Akhir. Teknik Mesin FT UMS.
2009

42
Universitas Sumatera Utara

[42] Pavia, Donald L., Gary M. Lampman, George S. Kriz . “Introduction to
Spectroscopy”. Western Washington University. Bellingham, Washington.
2001
[43] Wang, Ke, Ling Chen, Jingshen Wu, Mei Ling Toh, Chaobin He, Albert F.
Yee., “Epoxy Nanocomposites with Highly Exfoliated Clay : Mechanical
Properties and Fracture Mechanisms”. Macromolecules. Vol. 38. No. 3. Hal
788-800. 2005.
[44] Zhang, Aying, Dongxing Zhang. “Effects of Void on Physical Properties of
Hygrothermal Conditioned CFRP”. Advanced Materials Research. Vols.
652-654. 2013.
[45] Masyithah, Zuhrina. “Optimasi Sintesis Surfaktan Alkanolamida Dari Asam
Laurat Dengan Metode Dietanolamida dan N-Metil Glukamina Secara
Enzimatik”. Disertasi. FMIPA USU. 2010.
[46] Ahmadi, Seyed Javad., Huang Yodong, dan Wei Li. “Synthesis of
EPDM/Organoclay Nanocomposites : Effect of The Clay Exfoliation on
Structure and Physical Properties.” Iranian Polymer Journal Vol. 13. No. 5.
Hal 415-422. 2004
[47] Burlatsky, Sergei F., Vadim V. Atrazhev, Dmitry V. Dmitriev, Vadim. I.
Sultanov, Elena N. Timokhina, Elena A. Ugolkova, Sonia Tulyani, Antonio
Vincitore. “ Surface Tension Model for Surfactant Solutions at The Critical
Micelle Concentration”. Moscow, Russia. 2013.
[48] Ray, Suprakas Sinha, Masami Okamoto. “Polymer / Layered Silicate
Nanocomposites : A Review From Preparation to Processing”. Prog. Polym.
Sci. Vol. 28. Hal 1539-1641. 2003.
[49] Kishore, A., D. B. Venkatesh, M. Ashok Kumar, A. Ramesh, K. Nikil
Murthy, N. Karthikeyan. “Hydrophilic Modified Clay Nanocomposites :
Effect of Clay on Thermal and Vibrational Properties”. International Letters
of Chemistry, Physics and Astronomy. ISSN :2299-3843. Vol. 27. Hal 7386
[50] Paz, Rene Anisio, Edcleide Maria Araujo, Luiz Antonio Pessan, Tomas
Jeferson Alves Melo. “Evaluation of Impact Strength of Polyamide 6 /

43
Universitas Sumatera Utara

Bentonite Clay Nanocomposites”. Materials Research. Vol. 15(4). Hal 506509. 2012.
[51] Jdayil, Basim-Abu, Kaml Al-Malah, and Ranya Sawalha. “Study on
Bentonie- Unsaturated Polyester Composite Materials”. Journal of
Reinforced Plastics and Composites. Vol. 21. No. 17. 2002.
[52] Rull, N., RP Ollier, G Francucci, ES Rodriguez and VA Alvarez. “Effect of
the addition of nanoclays on the water absorption and mechanical properties
of glass fiber/up resin composites”. Journal of Composite Materials 0(0).
2014.
[53] Liu, X., Wu, Q., Berglund, L.A., Fan, J., and Qi, Z. “Polyamide 6-Clay
Nanocomposites/Polypropylene-Grafted-Maleic

Anhydride

Alloys”.

Polymer Vol. 42, Hal. 8235–8239. 2001.
[54] Ward, W.J., Gaines, G.L., Alger, M.M., and Stanley, T.J. “Gas Barrier
Improvement Using Vermiculite And Mica In Polymer Films”. Journal of
Membrane Science. Vol. 55, Hal. 173–80. 1991.

44
Universitas Sumatera Utara