Pengaruh Perendaman Basis Gigi Tiruan Nilon Termoplastik Dalam Bahan Pembersih Alkalin Peroksida Terhadap Kekuatan Impak Dan Transversal
60
DAFTAR PUSTAKA
1. Sharma A, Shashidhara HS. A review: Flexible removable partial dentures.
JDMS 2014; 13: 58-62.
2. Nandal S, Ghalaut P, Shekhawat H, Gulati MS. New era in denture base
resins: A review. DJAS 2013; 1: 136-143.
3. Kohli S, Bhatia S. Polyamides in dentistry. Int J Scientific Study 2013; 1: 2025.
4. Annonymous. Polyamide plays an important role in automotive, electronic,
and packaging. http://www.plastemart.com/upload/Literature/Polyamide.asp
(28 april 2016).
5. Shamnur SN, Jagadeesh KN, Kalavathi SD, Kashinath KR. “Flexible
denture”- an alternate for rigid dentures?. J Dent Sci & Res 2010; 1: 74-79.
6. Al-Habahbeh R. Water absorption and solubility of provisional crown and
bridge: The effect of the inclusion of polyethylene fibers. JRMS 2007; 14(1) :
22-5.
7. Zarb, Bolender. Prosthodontic treatment for edentulos patients. 12th eds.
Elsevier: St. Louis, 2004: 417-8.
8. Gunadi HA. Buku ajar ilmu geligi tiruan sebagian lepasan. 2nd ed. Jakarta:
Hipokrates, 1995: 402-8.
9. Neill DJ, Walter JD. Buku pintar geligi tiruan sebagian lepasan (partial
denture). Alih Bahasa. Lilian Yuwono. Jakarta: EGC,1993: 84-5.
10. Shay K. Denture hygiene: A review and update. J Contemp Dent Prac 2000;
1: 1-8.
11. Uludamar A, Ozkan YK, Kadir T, Ceyhan I. In vivo efficacy of alkaline
peroxide tablets and mouthwashes on candida albicans in patients with
denture stomatitis. J Appl Oral Sci 2010; 18(3): 291-6.
Universitas Sumatera Utara
61
12. Dikbas I, Koksal T, Bal B, Ozkurt Z, Kazaoglu E. A survey of dentists’
attitudes toward denture cleansing. OHDMBSC 2006; 5(4): 7-11.
13. Almashhadany HKM. The effect of newly prepared cleansing agent on some
properties of highly impact acrylic denture base material. 1st ed. ORIC
Publisher. Mosul, 2014: 16.
14. Val-Clean.
Valplast
Care
Instructions.
http://www.roedentallab.com/downloads/valplast%20patient%20care%20inst
ructions.pdf (22 Januari 2016).
15. Thakral GK, Aeran H. Yadav B, Thakral R. Flexible partial dentures – A
hope for the challenged mouth. People’s J of Scientific Research 2012; 5(2):
55-9.
16. Mareti D. Pengaruh penambahan serat kaca terhadap kekuatan transversal
dan modulus elastisitas bahan basis gigitiruan resin akrilik polimerasasi
panas. Skripsi. Medan: Universitas Sumatera Utara, 2010.
17. BASF Corporation. Effect of moisture conditioning methods on mechanical
properties of injection molded nylon 6. 2003.
18. Takabayashi Y. Characteristics of denture thermoplastic resins for non-metal
clasp dentures. Dent Material J 2010; 29(4): 353-61.
19. Basker RM, Davenport JC, Tomlin HR. Perawatan prostodontik pasien tak
bergigi. Alih Bahasa. Titi S. Soebakti, Hazmia Arsil. Jakarta: EGC, 1996:
217.
20. Sato S, Cavalcante MRS, Orsi IA, Paranhos HFO de, Zaniquelli O.
Assessment of flexural strength and color alteration of heat-polymerized
acrylic resins after simulated use of denture cleanser. Braz Dent J 2005;
6(2): 124-8.
21. Ahmad AS. Denture cleanser’s effect on impact strength of heart cured
acrylic. Iraqi Dental Journal 2015; 37: 1-5.
Universitas Sumatera Utara
62
22. Mansoor NS, Saleh DM, Abd-Alhameed SM. The effect of denture cleanser
materials on impact strength of heat cure acrylic resin. Mustansiria Dental
Journal 2010; 7(2): 214-9.
23. Salman M, Saleem S. Effect of different denture cleanser solutions on some
mechanical and physical properties of nylon and acrylic denture base
materials. J Bagh College Dentistry 2011; 23: 19-24.
24. Kortrakulkij K. Effect of denture cleanser on color stability and flexural
strength of denture base material. Thesis. Mahidol, Thailand: Mahidol
University, 2008: 4-18.
25. Shah VR, Shah ND, Chauhan CJ, Doshi PJ, Kumar A. Evaluation of flexural
strength and color stability of different denture base materials including
flexible material after using different denture cleansers. J Indian Prosthodont
Soc 2015; 15(4): 367-73.
26. McCabe JF, Walls AWG. Applied dental material. 9th ed. London: Blackwell
Munksgaard, 2008: 110-23.
27. Carr AB, Browan DT. McCracken’s removable partial prosthodontic. 12th
ed. Canada: Elsevier, 2011:103-8.
28. Noort R. Introduction to dental materials. 3rd ed. London: Mosby Elsevier,
2007 : 216-22.
29. Manappallil JJ. Basic dental materials. 2nd ed. New Delhi: Jaypee Brothers
Medical Publishers (P), 2003: 99-101.
30. Anusavice KJ. Phillip’s science dental materials. 12th ed. Missouri: Elsevier
Saunders, 2013: 53, 59, 100, 197-207.
31. Sepulveda-Navaro WF, Arana-Correa BE, Borges CPF, Jorge JHJ, Urban
VM, Campanha NH. Color stability of resins and nylon as denture base
material in beverages. J of Prosthodontics 2011; 20: 632-8.
32. Negrutiu M, Sinescu C, Romanu M, Pop D, Lakatos S. Thermoplastic resins
for flexible framework removable partial dentures. TMJ 2005, 55(3): 295-9.
Universitas Sumatera Utara
63
33. Kohli S, Bhatia S. Flexural properties of polyamide versus injection-molded
polymethymethacrylate denture base materials. European Journal of
Prosthodontics 2013; 1(3): 56-60.
34. Craig RG, Powers JM. Restorative dental materials. 11th ed. USA: Mobsy,
2002: 90.
35. Price CA. The effect of composition of denture base polymers on impact
resistance. Thesis. Sydney: University of Sydney, 1986:17-9.
36. Stinskas AV, Antropova NI, Korobov VI, Ratner SB, Samokhvalov AV,
Sharova AV. Fatique properties of kapron (nylon-6) and kaprolon.
Mekhanika Polimerov 1965; 1(2): 118-122.
37. Syahputra S. Perbedaan kekuatan impak bahan basis gigitiruan resin akrilik
polimerisasi panas dengan termoplastik nilon. Skripsi. Medan, Indonesia:
Universitas Sumatera Utara, 2010: 34.
38. Abuzar MA, dkk. Evaluating surface roughness of a polyamide denture base
material in comparison with poly (methyl methacrylate). J of Oral Science
2010; 52(4): 577-81.
39. Ariyani, Tamin H dan Indra M. Pengaruh penambahan fiber glass reinforced
terhadap penyerapan air dan stabilitas warna bahan basis gigi tiruan nilon
termoplastik. Dentika Dental Journal 2013;17(3): 239-45.
40. Goguta L, Marsavina L, Bratu D. Impact strength of acrylic heat curing denture
base resin reinforced with e-glass fibers. TMJ 2006; 56: 1.
41. Straioto FG, Ricomini Pilho AP, Fernandes Neto AJ, Del Bel Cury AA.
Polytetrafluorethylene added to acrylic resins: mechanical properties. Braz
Dent J 2010; 21 (1): 55-59.
42. Harper C. Handbook of plastics, elastomers and composites. 4th ed.
Michigan: McGraw Hill Professional, 2002: 22-5.
43. Dharmarajan NR, Yu TC, Schauder JR, Kaufman LG, Exxon Chemical
Company. Impact modification of nylon 6,6 resins with functional polyolefin
modifiers based on conventional and metallocene backbone resins.
Universitas Sumatera Utara
64
SPE/ANTEC 2000 Proceedings; 2000 May 7- 11; Orlando, Florida. 2000.
2505-8
44. Jadhav R, Bhide SV, Prabhudesai PS. Assessment of the impact strength of the
denture base resin polymerized by various processing techniques. Indian J Dent
Res 2013;24:19-25
45. Wady AF, Machado AL, Vergani CE, Pavarina AC, Giampaolo ET. Impact
strength of denture base and reline acrylic resins subjected to long-term water
immersion. Braz Dent J 2011; 22(1): 56-61
46. Machado AL, Bochio BC, Wady AF, Jorge JH, Canevarolo Jr SV. Vergani CE.
Impact strength of denture base and reline acrylic resins: An in vitro study. J
Dent Biomech 2012; 1-7.
47. Arudanti R, Patil NP. An investigation into the transversal and impact
strength of a new indigenous high impact denture base resin, DPI-Tuff and its
comparison with most commonly used two denture base resin. J Indian Pros
Soc 2006; 6(3): 133-8.
48. Gharechachi J, Asadzadeh N, Shahabian F, Gharechachi M. Flexural
properties of acrylic resin denture base processed by two different methods. J
Dent Res Dent Clin Dent Prospect 2014; 8(3):148-152.
49. Pero AC, Marra J, Paleari AG, Souza RF de, Ruvolo-Filho A, Compagnoni
MA. Reliability of a method for evaluating porosity in denture base resins.
Gerodontology 2011;28: 127-33.
50. Jafari AA, Falah-Tafti A, Lotfi-Kamran MH, Zahraeii A, Kazemi A. Vinegar
as a removing agent of candida albicans from acrylic resin plate.
Jundishapur J Microbiol 2012;5(2): 388-92.
51. David, Munadziroh E. Perubahan warna lempeng resin akrilik yang direndam
dalam larutan desinfektan sodium hipoklorit dan klorhexidin. Maj. Ked. Gigi.
(Dent. J.) 2005; 38 (1): 36-40.
52. Canay S, Erguven S, Yulug N. The function of enzymes in removing Candida
accumulated on denture plaque. J of Islamic Academy of Science 1991; 4:879.
Universitas Sumatera Utara
65
53. Diwan RR. Material prescribed in the management of edentulous patient. In
Eckert SE, Jacob RF, eds. Prosthodontics treatment for the edentulous
patients. India: Mosby, 2004: 202-4.
54. Polident.
Polident
5
minutes.
http://www.polident.com/en_ca/denture-
products/denture-cleansers/polident-5-minute.html (22 Januari 2016).
55. Chittaranjan B, Taruna, Sudhir, bharath. Material and methods for cleaning
the denture. Indian J Dent Adv 2011; 3(1): 423-6.
56. Anonymous. Electron arrangement and chemical properties of group 1.
http://www.bbc.co.uk/schools/gcsebitesize/science/add_ocr_pre_2011/periodi
c_table/electronsrev4.shtml (17 Februari 2016)
57. Vojvodic D, Matejicek F, Schauperl Z, Mehulic K, Segovic S. Flexural
strength of E-glasss fiber reinforced dental polymer and dental high impact
strength resin. Strojarstvo 2008; 50(4): 221-30.
58. Al Nakash SG. Effect of incorporation of poly vynil pyrrolidone on
transverse
strength,
impact
strength
and
surface
roughness
of
autopolymerizing acrylic resin. Tikrit Journal for Dental Science 2012; 2:
137-44.
59. Noegroho W, Kresnoadi U, Subianto A. The change of temperature on the
shear strength of permanent soft-liner on acrylic. Maj. Ked. Gigi. (Dent. J.)
2006; 39(2): 77-9.
60. Notoatmodjo S. Metodologi Penelitian Kesehatan.Jakarta: PT Rineka Cipta,
2010 : 29,50.
61. Kamath SS, Prithviraj DR. Comparison of transverse strength and impact
strength of polymethylmethacrylate resin and thermoplastic co-polyamide
nylon resin used for denture base construction. IJSER 2011; 2(8): 1-4.
62. Anonymous.
Tegangan
permukaan
zat
http://www.ilmukimia.org/2012/12/tegangan-permukaan-zat-cair.html
cair.
(16
Maret 2016).
Universitas Sumatera Utara
DAFTAR PUSTAKA
1. Sharma A, Shashidhara HS. A review: Flexible removable partial dentures.
JDMS 2014; 13: 58-62.
2. Nandal S, Ghalaut P, Shekhawat H, Gulati MS. New era in denture base
resins: A review. DJAS 2013; 1: 136-143.
3. Kohli S, Bhatia S. Polyamides in dentistry. Int J Scientific Study 2013; 1: 2025.
4. Annonymous. Polyamide plays an important role in automotive, electronic,
and packaging. http://www.plastemart.com/upload/Literature/Polyamide.asp
(28 april 2016).
5. Shamnur SN, Jagadeesh KN, Kalavathi SD, Kashinath KR. “Flexible
denture”- an alternate for rigid dentures?. J Dent Sci & Res 2010; 1: 74-79.
6. Al-Habahbeh R. Water absorption and solubility of provisional crown and
bridge: The effect of the inclusion of polyethylene fibers. JRMS 2007; 14(1) :
22-5.
7. Zarb, Bolender. Prosthodontic treatment for edentulos patients. 12th eds.
Elsevier: St. Louis, 2004: 417-8.
8. Gunadi HA. Buku ajar ilmu geligi tiruan sebagian lepasan. 2nd ed. Jakarta:
Hipokrates, 1995: 402-8.
9. Neill DJ, Walter JD. Buku pintar geligi tiruan sebagian lepasan (partial
denture). Alih Bahasa. Lilian Yuwono. Jakarta: EGC,1993: 84-5.
10. Shay K. Denture hygiene: A review and update. J Contemp Dent Prac 2000;
1: 1-8.
11. Uludamar A, Ozkan YK, Kadir T, Ceyhan I. In vivo efficacy of alkaline
peroxide tablets and mouthwashes on candida albicans in patients with
denture stomatitis. J Appl Oral Sci 2010; 18(3): 291-6.
Universitas Sumatera Utara
61
12. Dikbas I, Koksal T, Bal B, Ozkurt Z, Kazaoglu E. A survey of dentists’
attitudes toward denture cleansing. OHDMBSC 2006; 5(4): 7-11.
13. Almashhadany HKM. The effect of newly prepared cleansing agent on some
properties of highly impact acrylic denture base material. 1st ed. ORIC
Publisher. Mosul, 2014: 16.
14. Val-Clean.
Valplast
Care
Instructions.
http://www.roedentallab.com/downloads/valplast%20patient%20care%20inst
ructions.pdf (22 Januari 2016).
15. Thakral GK, Aeran H. Yadav B, Thakral R. Flexible partial dentures – A
hope for the challenged mouth. People’s J of Scientific Research 2012; 5(2):
55-9.
16. Mareti D. Pengaruh penambahan serat kaca terhadap kekuatan transversal
dan modulus elastisitas bahan basis gigitiruan resin akrilik polimerasasi
panas. Skripsi. Medan: Universitas Sumatera Utara, 2010.
17. BASF Corporation. Effect of moisture conditioning methods on mechanical
properties of injection molded nylon 6. 2003.
18. Takabayashi Y. Characteristics of denture thermoplastic resins for non-metal
clasp dentures. Dent Material J 2010; 29(4): 353-61.
19. Basker RM, Davenport JC, Tomlin HR. Perawatan prostodontik pasien tak
bergigi. Alih Bahasa. Titi S. Soebakti, Hazmia Arsil. Jakarta: EGC, 1996:
217.
20. Sato S, Cavalcante MRS, Orsi IA, Paranhos HFO de, Zaniquelli O.
Assessment of flexural strength and color alteration of heat-polymerized
acrylic resins after simulated use of denture cleanser. Braz Dent J 2005;
6(2): 124-8.
21. Ahmad AS. Denture cleanser’s effect on impact strength of heart cured
acrylic. Iraqi Dental Journal 2015; 37: 1-5.
Universitas Sumatera Utara
62
22. Mansoor NS, Saleh DM, Abd-Alhameed SM. The effect of denture cleanser
materials on impact strength of heat cure acrylic resin. Mustansiria Dental
Journal 2010; 7(2): 214-9.
23. Salman M, Saleem S. Effect of different denture cleanser solutions on some
mechanical and physical properties of nylon and acrylic denture base
materials. J Bagh College Dentistry 2011; 23: 19-24.
24. Kortrakulkij K. Effect of denture cleanser on color stability and flexural
strength of denture base material. Thesis. Mahidol, Thailand: Mahidol
University, 2008: 4-18.
25. Shah VR, Shah ND, Chauhan CJ, Doshi PJ, Kumar A. Evaluation of flexural
strength and color stability of different denture base materials including
flexible material after using different denture cleansers. J Indian Prosthodont
Soc 2015; 15(4): 367-73.
26. McCabe JF, Walls AWG. Applied dental material. 9th ed. London: Blackwell
Munksgaard, 2008: 110-23.
27. Carr AB, Browan DT. McCracken’s removable partial prosthodontic. 12th
ed. Canada: Elsevier, 2011:103-8.
28. Noort R. Introduction to dental materials. 3rd ed. London: Mosby Elsevier,
2007 : 216-22.
29. Manappallil JJ. Basic dental materials. 2nd ed. New Delhi: Jaypee Brothers
Medical Publishers (P), 2003: 99-101.
30. Anusavice KJ. Phillip’s science dental materials. 12th ed. Missouri: Elsevier
Saunders, 2013: 53, 59, 100, 197-207.
31. Sepulveda-Navaro WF, Arana-Correa BE, Borges CPF, Jorge JHJ, Urban
VM, Campanha NH. Color stability of resins and nylon as denture base
material in beverages. J of Prosthodontics 2011; 20: 632-8.
32. Negrutiu M, Sinescu C, Romanu M, Pop D, Lakatos S. Thermoplastic resins
for flexible framework removable partial dentures. TMJ 2005, 55(3): 295-9.
Universitas Sumatera Utara
63
33. Kohli S, Bhatia S. Flexural properties of polyamide versus injection-molded
polymethymethacrylate denture base materials. European Journal of
Prosthodontics 2013; 1(3): 56-60.
34. Craig RG, Powers JM. Restorative dental materials. 11th ed. USA: Mobsy,
2002: 90.
35. Price CA. The effect of composition of denture base polymers on impact
resistance. Thesis. Sydney: University of Sydney, 1986:17-9.
36. Stinskas AV, Antropova NI, Korobov VI, Ratner SB, Samokhvalov AV,
Sharova AV. Fatique properties of kapron (nylon-6) and kaprolon.
Mekhanika Polimerov 1965; 1(2): 118-122.
37. Syahputra S. Perbedaan kekuatan impak bahan basis gigitiruan resin akrilik
polimerisasi panas dengan termoplastik nilon. Skripsi. Medan, Indonesia:
Universitas Sumatera Utara, 2010: 34.
38. Abuzar MA, dkk. Evaluating surface roughness of a polyamide denture base
material in comparison with poly (methyl methacrylate). J of Oral Science
2010; 52(4): 577-81.
39. Ariyani, Tamin H dan Indra M. Pengaruh penambahan fiber glass reinforced
terhadap penyerapan air dan stabilitas warna bahan basis gigi tiruan nilon
termoplastik. Dentika Dental Journal 2013;17(3): 239-45.
40. Goguta L, Marsavina L, Bratu D. Impact strength of acrylic heat curing denture
base resin reinforced with e-glass fibers. TMJ 2006; 56: 1.
41. Straioto FG, Ricomini Pilho AP, Fernandes Neto AJ, Del Bel Cury AA.
Polytetrafluorethylene added to acrylic resins: mechanical properties. Braz
Dent J 2010; 21 (1): 55-59.
42. Harper C. Handbook of plastics, elastomers and composites. 4th ed.
Michigan: McGraw Hill Professional, 2002: 22-5.
43. Dharmarajan NR, Yu TC, Schauder JR, Kaufman LG, Exxon Chemical
Company. Impact modification of nylon 6,6 resins with functional polyolefin
modifiers based on conventional and metallocene backbone resins.
Universitas Sumatera Utara
64
SPE/ANTEC 2000 Proceedings; 2000 May 7- 11; Orlando, Florida. 2000.
2505-8
44. Jadhav R, Bhide SV, Prabhudesai PS. Assessment of the impact strength of the
denture base resin polymerized by various processing techniques. Indian J Dent
Res 2013;24:19-25
45. Wady AF, Machado AL, Vergani CE, Pavarina AC, Giampaolo ET. Impact
strength of denture base and reline acrylic resins subjected to long-term water
immersion. Braz Dent J 2011; 22(1): 56-61
46. Machado AL, Bochio BC, Wady AF, Jorge JH, Canevarolo Jr SV. Vergani CE.
Impact strength of denture base and reline acrylic resins: An in vitro study. J
Dent Biomech 2012; 1-7.
47. Arudanti R, Patil NP. An investigation into the transversal and impact
strength of a new indigenous high impact denture base resin, DPI-Tuff and its
comparison with most commonly used two denture base resin. J Indian Pros
Soc 2006; 6(3): 133-8.
48. Gharechachi J, Asadzadeh N, Shahabian F, Gharechachi M. Flexural
properties of acrylic resin denture base processed by two different methods. J
Dent Res Dent Clin Dent Prospect 2014; 8(3):148-152.
49. Pero AC, Marra J, Paleari AG, Souza RF de, Ruvolo-Filho A, Compagnoni
MA. Reliability of a method for evaluating porosity in denture base resins.
Gerodontology 2011;28: 127-33.
50. Jafari AA, Falah-Tafti A, Lotfi-Kamran MH, Zahraeii A, Kazemi A. Vinegar
as a removing agent of candida albicans from acrylic resin plate.
Jundishapur J Microbiol 2012;5(2): 388-92.
51. David, Munadziroh E. Perubahan warna lempeng resin akrilik yang direndam
dalam larutan desinfektan sodium hipoklorit dan klorhexidin. Maj. Ked. Gigi.
(Dent. J.) 2005; 38 (1): 36-40.
52. Canay S, Erguven S, Yulug N. The function of enzymes in removing Candida
accumulated on denture plaque. J of Islamic Academy of Science 1991; 4:879.
Universitas Sumatera Utara
65
53. Diwan RR. Material prescribed in the management of edentulous patient. In
Eckert SE, Jacob RF, eds. Prosthodontics treatment for the edentulous
patients. India: Mosby, 2004: 202-4.
54. Polident.
Polident
5
minutes.
http://www.polident.com/en_ca/denture-
products/denture-cleansers/polident-5-minute.html (22 Januari 2016).
55. Chittaranjan B, Taruna, Sudhir, bharath. Material and methods for cleaning
the denture. Indian J Dent Adv 2011; 3(1): 423-6.
56. Anonymous. Electron arrangement and chemical properties of group 1.
http://www.bbc.co.uk/schools/gcsebitesize/science/add_ocr_pre_2011/periodi
c_table/electronsrev4.shtml (17 Februari 2016)
57. Vojvodic D, Matejicek F, Schauperl Z, Mehulic K, Segovic S. Flexural
strength of E-glasss fiber reinforced dental polymer and dental high impact
strength resin. Strojarstvo 2008; 50(4): 221-30.
58. Al Nakash SG. Effect of incorporation of poly vynil pyrrolidone on
transverse
strength,
impact
strength
and
surface
roughness
of
autopolymerizing acrylic resin. Tikrit Journal for Dental Science 2012; 2:
137-44.
59. Noegroho W, Kresnoadi U, Subianto A. The change of temperature on the
shear strength of permanent soft-liner on acrylic. Maj. Ked. Gigi. (Dent. J.)
2006; 39(2): 77-9.
60. Notoatmodjo S. Metodologi Penelitian Kesehatan.Jakarta: PT Rineka Cipta,
2010 : 29,50.
61. Kamath SS, Prithviraj DR. Comparison of transverse strength and impact
strength of polymethylmethacrylate resin and thermoplastic co-polyamide
nylon resin used for denture base construction. IJSER 2011; 2(8): 1-4.
62. Anonymous.
Tegangan
permukaan
zat
http://www.ilmukimia.org/2012/12/tegangan-permukaan-zat-cair.html
cair.
(16
Maret 2016).
Universitas Sumatera Utara