63
DAFTAR PUSTAKA
Aulia F, Marpongahtun, Gea S. 2013. Studi Penyediaan Nanokristal Selulosa dari
Tandan Kosong Sawit TKS. J. Saintia Kimia. 12: 1-7.
Ballesteros JEM, Fiorelli J, Savastano H, Vidil L. 2015. Evaluation of the Effect of Drying and Rewetting Cycles in Eucalyptus Pulps. Int. J. Eng. Technol.
75: 397-400. doi: 10.7763ijet.2015.v7.826
Bednarik V, Vondruska M, Sild M, Koutny M. 2004. StabilizationSolidification
of Wastewater Treatment Sludge. J. Environ. Eng. 3012: 1527-1533. 10.1061ASCE0733-93722004130:121527
Brinchi L, Cotana F, Fortunati E, Kenny JM. 2013. Production of nanocrystalline cellulose from lignocellulosic biomass: Technology and applications.
Carbohydr. Polym.
94: 154-169. DOI: 10.1016j.carbpol.2013.01.033
Browning BL. 1967. Methods of Wood Chemistry. New York US: Wiley- Interscience Publishers.
Chen D, Lawton D, Thompson MR, Liu Q. 2012. Biocomposites reinforced with cellulose nanocrystals derived from potato peel waste. Carbohydr. Polym.
90: 709
–716. doi: 10.1016j.carbpol.2012.06.002 Chen W, Yu H, Liu Y, Chen P, Zhang M et al. 2011. Individualization of
cellulose nanofibers from wood using high-intensity ultrasonication combined with chemical pretreatments. Carbohydr. Polym. 834: 1804-
1811. doi: 10.1016j.carbpol.2010.10.040
Claramunt J, Ardanuy M, García-Hortal JA. 2010. Effect of drying and rewetting cycles on the structure and physicochemical characteristics of softwood
fibres for reinforcement of cementitious composites. Carbohydr. Polym. 791: 200-205. doi: 10.1016j.carbpol.2009.07.057
Claramunt J, Ardanuy M, García-Hortal JA, Filho RDT. 2011. The hornification of vegetable fibers to improve the durability of cement mortar composites.
Cem. Concr.
Compos.
335: 586-595.
doi: 10.1016j.cemconcomp.2011.03.003
Dai D, Fan M, Collins P. 2013. Fabrication of nanocelluloses from hemp fibers and their application for the reinforcement of hemp fiber. Ind. Crops Prod.
44: 192
– 199. doi: 10.1016j.indcrop.2012.11.010 Diniz JMBF, Gil MH, Castro JAAM. 2004. Hornification-its origin and
interpretation in wood pulps. Wood Sci. Technol. 376: 489-494. doi: 10.1007s00226-003-0216-2
Durán N, Lemes AP, Durán M, Freer J, Baeza J. 2011. A minireview of cellulose nanocrystals and its potential integration as co-product in bioethanol
production. J. Chil. Chem. Soc. 56: 672-677. doi: 10.4067S0717- 97072011000200011
Elanthikkal S, Gopalakrishnapanicker U, Varghese S, Guthrie JT. 2010. Cellulose microfibres produced from banana plant wastes: Isolation and
characterization. Carbohydr.
Polym.
803: 852-859.
doi: 10.1016j.carbpol.2009.12.043
Fahma F, Hori N, Iwamoto S, Iwata T, Takemura A. 2010. Isolation, preparation, and characterization of nanofibers from oil palm empty-fruit-bunch
OPEFB. Cellulose 17: 977
–985. doi: 10.1007s10570-010-9436-4
64 Fahma F, Hori N, Iwamoto S, Iwata T, Takemura A. 2011. Effect of pre-acid-
hydrolysis treatment on morphology and properties of cellulose nanowhiskers from coconut husk. Cellulose. 18: 443
–450. doi: 10.1007s10570-010-9480-0
Fan Js, Li Yh. 2012. Maximizing the yield of nanocrystalline cellulose from
cotton pulp fiber. Carbohydr. Polym. 88: 1184-1188. doi: 10.1016j.carbpol.2012.01.081
Faruk O, Bledzki AK, Fink H-P, Sain M. 2012. Biocomposites reinforced with natural fibers: 2000
–2010. Prog. Polym. Sci. 3711: 1552-1596. doi:
10.1016j.progpolymsci.2012.04.003 Fortunatia E, Puglia D, Luzi F, Santulli C, Kenny JM et al. 2013. Binary PVA
bio-nanocomposites containing cellulose nanocrystals extracted from different natural sources: Part I. Carbohydr. Polym. 97: 825
– 836. doi: 10.1016j.carbpol.2013.03.075
Frone AN, Panaitescu DM, Donescu D, Spataru CI, Radovici C et al. 2011. Preparation And Characterization Of Pva Composites With Cellulose
Nanofibers Obtained By Ultrasonication. BioResources. 61: 487-512.
Geng X, Deng J, Zhang SY. 2006. Effect of Hot-Pressing Parameters and Wax Content on the Properties of Fiberboard Made from Paper Mill Sludge.
Wood Fiber Sci.
384: 736-741.
Girones J, Pelach MA, Pardini G, Mutje P, Vilaseca F. 2010. Recycling of paper mill sludge as fillerreinforcement in polypropylene composites. J. Polym.
Environ.
18: 407
–412. doi: 10.1007s10924-010-0169-0 Gomez JA, de Alda O. 2008. Feasibility of recycling pulp and paper mill sludge
in the paper and board industries. Resour. Conserv. Recycl. 52. doi: 10.1016j.resconrec.2008.02.005
Hamzeh Y, Ashori A, Mirzaei B. 2011. Effects of Waste Paper Sludge on the Physico-Mechanical Properties of High Density PolyethyleneWood Flour
Composites. J. Polym. Environ. 19: 120
–124. doi: 10.1007s10924-010- 0255-3
Hardiani H, Sugesty S. 2009. Pemanfaatan Limbah Sludge Industri Kertas Sigaret
Untuk Bahan Baku Bata Beton. Berita Selulosa. 442: 86-98.
Henrique MA, Silvério HA, Neto WPF, Pasquini D. 2013. Valorization of an agro-industrial waste, mango seed, by the extraction and characterization
of its cellulose nanocrystals. J. Environ. Manage. 121: 202-209. doi: 10.1016j.jenvman.2013.02.054
Johar N, Ahmad I, Dufresne A. 2012. Extraction, preparation and characterization of cellulose fibres and nanocrystals from rice husk. Ind.
Crops Prod.
37: 93-99. doi: 10.1016j.indcrop.2011.12.016