65 Kim H-S, Lee B-H, Choi S-W, Kim S, Kim H-J. 2007. The effect of types of
maleic anhydride-grafted polypropylene MAPP on the interfacial adhesion properties of bio-flour-filled polypropylene composites. Compos.
Part A-Appl. S.
386: 1473-1482. doi: 10.1016j.compositesa.2007.01.004
Köhnke T, Lund K, Brelid H, Westman G. 2010. Kraft pulp hornification: A closer look at the preventive effect gained by glucuronoxylan adsorption.
Carbohydr. Polym.
812: 226-233. doi: 10.1016j.carbpol.2010.02.023
Krigstin S, Sain M. 2006. Characterization and potential utilization of recycled
paper mill sludge. Pulp Pap. Can. T 104. . 1075: 29-32.
Landry Vr, Alemdar A, Blanchet P. 2010. Nanocrystalline Cellulose:
Morphological, Physical, and Mechanical Properties. For. Prod. J. . 612: 104-114.
Langford JI, Wilson A. 1978. Scherrer after sixty years: a survey and some new
results in the determination of crystallite size. J. Appl. Crystallogr. 112: 102-113.
Lavoine N, Desloges I, Dufresne A, Bras J. 2012. Microfibrillated cellulose - its barrier properties and applications in cellulosic materials: a review.
Carbohydr. Polym.
902: 735-764. doi: 10.1016j.carbpol.2012.05.026
Leão AL, Cherian BM, Souza SFd, Sain M, Narine S et al. 2012. Use of primary sludge from pulp and papermills for nanocomposites. Mol. Cryst. Liq.
Cryst.
556: 254
–263. doi: 10.108015421406.2012.635974 Li H, Liu H, Fu S, Zhan H. 2011a. Surface hydrophobicity modification of
cellulose fibers by layer-by-layer self-asssembly of lignosulfonates. BioResources.
62: 1681-1695.
Li Z, Zhou X, Pei C. 2011b. Research article effect of sisal fiber surface treatment on properties of sisal fiber reinforced polylactide composites.
Int. J. Polym. Sci.
2011: 1-7. doi: 10.11552011803428
Lima PRL, Santos RJ, Ferreira SR, Filho RDT. 2014. Characterization and treatment of sisal fiber residues for cement-based composite application.
Eng. Agríc., Jaboticabal.
345: 812-825.
Lin Q, Zhou X, Dai G, Bi Y. 2002. Some studies on mechanical properties of wood flourcontinuous glass matpolypropylene composite. J. Appl.
Polym. Sci.
853: 536-544. doi: 10.1002app.10591
Lu H, Gui Y, Zheng L, Liu X. 2013. Morphological, crystalline, thermal and physicochemical properties of cellulose nanocrystals obtained from sweet
potato residue.
Food Res.
Int.
50: 121-128.
doi: 10.1016j.foodres.2012.10.013
Lu JZ, Wu Q, Harold S. McNabb J. 2000. Chemical Coupling In Wood Fiber And Polymer Composites: A Review Of Coupling Agents And
Treatments. Wood Fiber Sci. 321: 88-104.
Luo X, Zhu JY. 2011. Effects of drying-induced fiber hornification on enzymatic
saccharification of lignocelluloses. Enzyme Microb. Technol. 481: 92-99. doi: 10.1016j.enzmictec.2010.09.014
Mehmood S, Khaliq A, Ranjha SA. 2010. The use of post consumer wood waste for the production of wood plastic composites: A review. Di dalam: B.
Bilitewski, W. P. Clarke, R. Cossu, T. Matsuto, M. Nelles et al., editor. Third International Symposium on Energy from Biomass and Waste
.8-11 November 2010; Venice, Italy IT: CISA Publisher.
66 Miller RB. 1999. Structure of Wood. Di dalam: F. P. Laboratory, editor. Wood
Handbook-Wood as an Engineering Material . Madison US: Department
of Agriculture, Forest Service, Forest Products Laboratory. hlm 2.1-2.4. Minor JL. 1994. Hornification - Its Origin and Meaning. Prog. Pap. Recycl. .
32: 93-95.
