Overview of Project Problem Statement

CHAPTER 1 INTRODUCTION

1.1 Overview of Project

The Renewable Energy such as the resources that would implement in this project. Generally, input power sources connected to the home is come from the Tenaga Nasional Berhad TNB. The generation comes from power sources such as gas, hydroelectric, and coal as resources to produce the electricity. Malaysia such as the country has a good mixed of energy sources. As an alternatively way, the renewable energy sources has been used to replace it and to generate the electricity. The most of power sources are come from the solar energy. Solar energy such as a large resource comes from the sunlight which is free of pollution. In Malaysia, the renewable energy provides more benefits to remain strong include an improved balance of trade, foreign exchange savings, more competitive industries, new export markets, employment opportunities, lower consumer prices and improvement of environment. Moreover, this project was implementing two of sources which come from main and other renewable energy power sources connected to the load form home application. The primary sources are main power and while the secondary is renewable energy sources. The automatic switching helps human while selected the two of power sources that has connected to the load.

1.2 Problem Statement

Nowadays, the global warming issue was emphasizing into our earth from the energy sources that we used every day. The solution to this problem being the low level of the temperature of global warming, renewable energy sources is the best way to generate electricity. The renewable energy includes solar, wind, hydropower, biomass and geothermal. Besides, an orientation in tropical and whether country such as Malaysia, solar energy has more potential utilized in wide range of application growing rapidly. The renewable energy as solar energy currently less used in the residential because of cost is expensive to build the system. Towards, to improve the performance and this critical issue, the solar energy used to solve this problem. Moreover, by improvement the system, the automatic switch has controlled to help human on the way to select primary or secondary power sources. Therefore, the several advantages give more uncomplicated while selected the power sources that has connected to the load. On proper designed, the automatic switch is proposed to ensure workings safely.

1.3 Objectives of Project