CTM; Reviewed: SPOC 6282007
Solution Interoperability Test Lab Application Notes ©2007 Avaya Inc. All Rights Reserved.
36 of 64 AC-MP118-FXO
Step Description
6. Proxy and Registration From the menu shown in Step 5, navigate to Protocol Definition
Proxy Registration
. Configure the parameters as described below. If DNS is used, fully qualified domain names FQDN can be used in fields requesting IP addresses below.
For the Enable Proxy field, select Use Proxy from the pull-down menu. In the Proxy IP Address field, enter the IP address of the Avaya SES.
For the Enable Proxy Keep Alive field, select Using Options from the pull-
down menu. The MP-118 will use the SIP OPTIONS message as a handshake mechanism with the Avaya SES to determine if the SIP connection is up. If the
connection is down, the MP-118 will failover to the FXO ports.
Set the Enable Fallback to Routing Table field to Enable. For the Always Use Proxy field, select Enable.
For the Send All Invite to Proxy field, select Yes. This directs the MP-118 to
send all INVITE requests to the Avaya SES, including those generated as the result of a transfer or redirect.
For the Enable Registration field, select Enable. This will allow the MP-118
to register the FXS and FXO ports with the Avaya SES.
In the Registrar IP Address field, enter the IP address of the Avaya SES.
Default values may be retained for all other fields. Scroll down to continue configuring parameters on the lower half of the screen.
CTM; Reviewed: SPOC 6282007
Solution Interoperability Test Lab Application Notes ©2007 Avaya Inc. All Rights Reserved.
37 of 64 AC-MP118-FXO
Step Description
7. Configure the parameters as described below.
Set the Registration Time field to a value in seconds larger than the
minimum required by the Avaya SES. The default value of 180 is too small. The compliance test used 3600.
In the Gateway Name field, enter the IP address of the Avaya SES. For the Authentication Mode, select Per Endpoint. The MP-118 will
authenticate each FXSFXO port separately. Click Submit.
CTM; Reviewed: SPOC 6282007
Solution Interoperability Test Lab Application Notes ©2007 Avaya Inc. All Rights Reserved.
38 of 64 AC-MP118-FXO
Step Description
8. General Protocol Parameters From the menu shown in Step 5, navigate to Protocol Definition
