CTM; Reviewed: SPOC 6282007
Solution Interoperability Test Lab Application Notes ©2007 Avaya Inc. All Rights Reserved.
52 of 64 AC-MP118-FXO
Step Description
22. Endpoint Settings To access these parameters, select Protocol Management in the left pane and navigate
to Endpoint Settings in the right pane. The pull-down choices for Endpoint Settings are shown below.
23. Authentication From the menu shown in Step 22, navigate to Endpoint Settings
Authentication .
The Authentication page defines a username and password combination for authentication of each MP-118 port with the Avaya SES. Enter a User Name and
Password
that matches the values configured on Avaya SES in Section 4, Step 5. Click Submit.
CTM; Reviewed: SPOC 6282007
Solution Interoperability Test Lab Application Notes ©2007 Avaya Inc. All Rights Reserved.
53 of 64 AC-MP118-FXO
Step Description
24. Automatic Dialing From the menu shown in Step 22, navigate to Endpoint Settings
Automatic Dialing
.
The Automatic Dialing page provides the mapping of incoming calls on the FXO ports to a branch extension when the data WAN is unavailable. In the example below, each
FXO port is mapped to a different extension at the branch location. The destination extension is placed in the Destination Phone Number column.
Click Submit.
CTM; Reviewed: SPOC 6282007
Solution Interoperability Test Lab Application Notes ©2007 Avaya Inc. All Rights Reserved.
54 of 64 AC-MP118-FXO
Step Description
25. Caller ID From the menu shown in Step 22, navigate to Endpoint Settings
Caller ID . Enter
a descriptive name in the Caller IDName column. Click Submit.
26. Enable Caller ID From the menu shown in Step 22, navigate to Endpoint Settings
Caller ID Permissions
. Caller ID can be enabled on a per port basis. Select Enable in the Caller ID
column for each port.
Click Submit.
CTM; Reviewed: SPOC 6282007
Solution Interoperability Test Lab Application Notes ©2007 Avaya Inc. All Rights Reserved.
55 of 64 AC-MP118-FXO
Step Description
27. FXO Settings To access these parameters, select Protocol Management in the left pane and navigate
to FXO Settings in the right pane. The pull-down choices for FXO Settings are shown below.
28. FXO Settings From the menu shown in Step 27, navigate to FXO Settings
