Pengaruh Penambahan Pengisi Kitosan dan Plasticizer Etilen Glikol Terhadap Karakteristik Bioplastik dari Pati Biji Alpukat (Persea americana mill)
DAFTAR PUSTAKA
[1] Begum I, Zareena. “Plastics and Environment”. Dissemination Paper – 12.
Centre of Excellence in Environmental Economics. Madras School of
Economics. 2010.
[2] Kipngetich, Terer Erick and Hillary, Magut. “A blend of Green Algae and
Sweet Potato Starch as a Potential Source of Bioplastic Production and Its
Significance to the Polymer Industry”. International Journal of Green and
Herbal Chemistry. Vol.2. Department of Chemistry, University of Eastern
Africa, Baraton. 2013.
[3] A. Jones, M. Zeller, and S. Sharma, “Thermal, mechanical, and moisture
absorption properties of egg white protein bioplastics with natural rubber and
glycerol,” Prog. Biomater., vol. 2, no. 1, p. 12, 2013.
[4] et. al Cereda, M.P, “Characterization of Edible Films of Cassava Strach by
Electron Microscopy,” J. Food Technol., pp. 91–95, 2000.
[5] Darni, Yuli, Sri Ismiyati D, Tigor Marbun. “Influence Concentration of
Plasticizer and Formulation of Banana Starch – Chitosan to Mechanical
Property and Water Uptake of Bioplastic”. International Journal of
Engineering and Science. Vol. 1, No.4, 2010. Teknik Kimia. Fakultas
Teknik. Universitas Malahayati Press. 2010.
[6] Plastice. 2013. “Future of Bioplastics”. 3rd International Plastice Conference.
Cobro – Packaging Research Institute. Poland.
[7] Ave´rous, L. “Biodegradable Multiphase Systems Based on Plasticized
Starch: a review”. Journal of Macromolecular Science – Part C Polymer
Reviews, C4(3), 231–274. 2004.
[8] Badan Pusat Statistik, “Survey Pertanian Produksi
Indonesia”, Biro Pusat Statistik, Jakarta, 2013.
Buah-buahan
di
[9] Kahn, Varda. “Characterization of Starch Isolated from Avocado Seeds”.
Jouurnal of Food Science. Volume 52, No. 6, 1987. Hal.1646
[10] Stephen, A.M., 1995, Food Polysaccharides and Their Application,
University of Cape Town, Marcel Dekker, Inc, Rondebosch, 442-450.
62
Universitas Sumatera Utara
[11] Prashanth, K.V., Harish, K. L, Shamalab, T.R., dan Tharanathan, R.N. 2005.
“Biodegradation of Kitosan-Graft-Polymethylmethacrylate Films”. Journal of
International Biodeterioration & Biodegradation. 56: 115–120.
[12] Y. Darni, “Penentuan Kondisi Optimum Ukuran Partikel dan Bilangan
Reynold Pada Sintesis Bioplastik Berbasis Sorgum,” J. Rekayasa Kim. dan
Lingkung., vol. 8, no. 2, pp. 95–103, 2011.
[13] Yadav, G., & Satoskar. 1997. “Kinetic of Exposidation of alkyl Esters of
Undercylenic Acid: Comparison of traditional Route us Ishii”. Venturello
Chemistry , 74, 397-401.
[14] Bourtoom, Thawien. “Plasticizer Effect on the Properties of Biodegradable
Blend Film From Rice Starch-Chitosan”. Songklanakarin J. Sci. Technol.30
(Suppl.1), 149-165, April 2008. Department of Material Product Technology,
Faculty of Agro-Industry, Prince of Songkla University, Hat Yai, Songkhla,
90112, Thailand. Songklanakarin Journal of Science and Technology.
[15] M. H. S. Ginting, M. F. R. Tarigan, and A. M. Singgih, “Effect of
Gelatinization Temperature and Chitosan on Mechanical Properties of
Bioplastics from Avocado Seed Starch (Persea americana mill) with
Plasticizer Glycerol,” Int. J. Eng. Sci., vol. 4, no. 12, pp. 36–43, 2015.
[16] Widyaningsih, Senny, Dwi Kartika, Yuni Tri Nurhayati. Pengaruh
Penambahan Sorbitol dan Kalsium Karbonat Terhadap Karakteristik dan Sifat
Biodegradasi Film dari Pati Kulit Pisang. Molekul, Vol. 7, No. 1. Program
Studi Kimia, Fakultas Sains dan Teknik, Unsoed, Purwokerto. 2012.
[17] Lazuardi, Gilang Pandu dan Sari Edi Cahyaningrum. 2013. “Preparation and
Characterization Based Bioplastic Chitosan and Cassava Starch with Glycerol
Plazticizer”. Journal of Chemistry. Vol. 2 (3) : 161-166.
[18] K. J. Seal, “Test Methods and Standards for Biodegradable Plastics,” in
Chemistry and Technology of Biodegradable Polymer, 1994.
[19] W. M. Putra, “Pengaruh Penambahan Selulosa Mahkota Nanas dalam
Pembuatan Plastik Biodegradable dari Pati Umbi Gadung (Dioscorea densst)
dengan menggunakan Plastisizer Gliserin,” Politeknik Negeri Sriwijaya,
2015.
63
Universitas Sumatera Utara
[20] L. Avérous, “Polylactic Acid: Synthesis, Properties and Applications,” in
Monomers, Polymers and Composites from Renewable Resources, 2008, pp.
433–449.
[21] L. Liu, J. L. Kennedy, and P. K. Joseph, “Selection of Optimum Extraction
Technology Parameters in The Manufacture of Edible/Biodegradable
Packaging Film Derivated from Food Based Polymers,” J. Agric. Environ.,
vol. 3, 2005.
[22] H. Herawati, “Potensi Pengembangan Produk Pati Tahan Cerna sebagai
Pangan Fungsional,” J. Litbang Pertan., vol. 30, no. 024, 2011.
[23] D. R. Lu, C. M. Xiao*, S. J. Xu. Starch-based completely biodegradable
polymer materials. College of Material Science and Engineering of Huaqiao
University, Quanzhou, 362021, P. R. China. eXPRESS Polymer Letters
Vol.3, No.6 (2009) 366–375.
[24] A.-C. Elliasson, Starch in Food: Structur, Function and Applications, First
Publ. Cambridge: Woodhead Publishing Limited, 2004.
[25] J. BeMiller and R. Whistler, Starch: Chemistry and Technology. USA:
Elsevier, 2009.
[26] Elida Purba. 2009. “Hidrolisis Pati Ubi Kayu (Manihot Esculenta) dan Pati
Ubi Jalar (Impomonea batatas) menjadi Glukosa Secara Cold Process dengan
Acid Fungal amylase dan Glukoamilase”. Lampung : Universitas Lampung
[27] Kolusheva, T. and A. Marinova. “A study of the Optimal conditions For
Starch Hydrolysis Through Thermostable α –Amylase”. Journal of the
University of Chemical Technology and Metallurgy, 42(1): 93-96.2007.
[28] M. Tako, Y. Tamaki, T. Teruya, and Y. Takeda, “The Principles of Starch
Gelatinization and Retrogradation,” Food Nutr. Sci., vol. 5, pp. 180–291,
2014.
[29] N. A. Amin, “Pengaruh Suhu Fosforilasi terhadap Sifat Fisikokimia Pati
Tapioka Termodifikasi,” Universitas Hasanuddin, 2013.
64
Universitas Sumatera Utara
[30] Ganda Merisiyanto dan Lizda Johar Mawarani. Pengembangan Plastik
Photobiodegradable Berbahan Dasar Umbi Ubi Jalar. Jurusan Teknik Fisika,
Fakultas Teknologi Industri, Institut Teknologi Sepuluh Nopember (ITS).
Jurnal Teknik Pomits Vol. 2, No. 1, (2013) ISSN: 2337-3539.
[31] Otto B. Wurzburg, Modified Starchs: Properties and Uses, United States :
CRC Press Inc. (1989).
[32] Nelis Imanningsih. Profil Gelatinisasi Beberapa Formulasi Tepung-Tepungan
Untuk Pendugaan Sifat Pemasakan. Penel Gizi Makan 2012, 35(1): 13-22
[33] A. Chandra, H. M. Inggrid, and Verawati, “Pengaruh pH dan Jenis Pelarut
pada Perolehan dan Karakterisasi Pati dari Biji Alpukat,” Lemb. Penelit. dan
Pengabdi. Masy., vol. 03, no. 7, pp. 30–39, 2013.
[34] B.A Orhevba and A.O Jinadu,”Determination Of Physico-Chemical
Properties and Nutritional Contents Of Avocado Pear (Persea Americana
M.)”, Journal Academic Research International, Vol. 1, No. 3, 2011, hal. 373374.
[35] Hika Citra Handayani A.P,” Pengaruh Peningkatan Konsetrasi Ekstrak Etanol
96% Biji Alpukat (Perseae americana Mill) Terhadap Formulasi Sabun Padat
Transparan”, Skripsi. Program Studi Farmasi Universitas Islam Negeri Syarif
Hidayatullah, Jakarta. 2009, hal. 28.
[36] Arukwe, U., Amadi, B.A., Duru, M. K.C., Agomuo,E.N., Adindu, E. A.,
Odika, P.C., Lele, K.C., Egejuru, L., and Anudike, J.,”Chemical Composition
Of Persea Americana Leaf, Fruit and Seed”, IJRRAS, Vol. 11, No. 2, 2012,
hal. 346-347.
[37] D. Listiyaningsih, “Manufacture and Characterization of Dioscorea esculenta
Starch-Chitosan with Plasticizer Ethylen Glicol ,” Universitas Negeri
Semarang, Semarang, 2013.
[38] Erfan, Ahmad. 2012. Sintesis Bioplastik Dari Pati Ubi Jalar Menggunakan
Penguat Logam ZnO Dan Penguat Alami Kitosan. Skripsi. Program
StudiTeknik Kimia. Fakultas Teknik. Universitas Indonesia.
[39] Tabrani, Emping Jagung: Teknologi dan Kendalanya. Bandung: Institut
Teknologi Bandung, 1997.
65
Universitas Sumatera Utara
[40] S. Wijana, I. Nurika, and E. Habibah, “Analisis Kelayakan Kualitas Tapioka
Berbahan Baku Gaplek (Pengaruh Asal Gaplek Dan Kadar Kaporit Yang
Digunakan),” J. Teknol. Pertan., vol. 10, no. 2, pp. 97–105, 2009.
[41] A. Triyono, “Peningkatan Fungsional Pati dari Ubi Jalar (Ipomea batatas L.)
dengan Enzim Alfa-Amilase (Bacillus subtilis) sebagai Bahan Substitusi
Pengolahan Pangan,” J. Sains MIPA, vol. 13, no. 1, pp. 60–66, 2007.
[42] Zulharmita, S. Nola Dewi, and Mahyuddin, “Pembuatan Mikrokristalin
Selulosa dari Ampas Tebu (Saccharum officinarum L.),” J. Sains dan Teknol.
Farm., vol. 17, no. 2, pp. 158–163, 2012.
[43] Martunis, “Pengaruh Suhu Dan Lama Pengeringan Terhadap Kuantitas Dan
Kualitas Pati Kentang Varietas Granola,” J. Teknol. dan Ind. Pertan. Indones.,
vol. 4, no. 3, 2012.
[44] Robyt, J.F. (1998). “Essentials of Carbohydrate Chemistry” , Springer, ISBN
0-38794951-8, New York, USA.
[45] ] Utrilla, R. Coello M.E. Rodriguez, Huezo H. Carillo, Navas C. Hernandez,
Jaimes E.J. Vernon, Carter J. Alvarez, Ramirez. 2013. “In Vitro Digestibility,
Physicochemical, Thermal and Rheological Properties of Banana Starches”.
2013.
[46] M. A. Bertuzzi, “Mechanical properties of a high amylose content corn starch
based film , gelatinized at low temperature Propriedades mecânicas de filme a
base de amido de milho,” Brazilian J. Food Technol., vol. 15, no. 3, pp. 219–
227, 2012.
[47] A. M. Legowo, “Analisis Pangan,” Semarang, 2004.
[48] R. Amalia, “Karakterisasi Fisikokimia dan Fungsional Tepung Komposit
Berbahan Dasar Beras, Ubi Jalar, Kentang, Kedelai, dan Xanthan Gum,”
Universitas Sumatera Utara, 2013.
[49] Firmansyah, I. U. Suarni, and M. Aqil, “Keragaman Mutu Pati Beberapa
Varietas Jagung,” Penelit. Pertan. Tanam. Pangan, vol. 32, no. 1, 2013.
[50] E.C.Y. Li-Chan. “Of Protein in Food Systems : an introduction”. The
University of British Columbia. Canada. Proteins in Food
Processing.Woodhead Publishing in Food Science and Technology. 2000.
66
Universitas Sumatera Utara
[51] N. Guerrieri, University of Milan, Italy. Cereal proteins. Proteins in Food
Processing.Woodhead Publishing in Food Science and Technology. 2000.
[52] Standar Nasional Indonesia. Cara Uji Makanan dan Minuman. SNI - 012891-1992. Badan Standardisasi Nasional
[53] Tomoko Sasaki, Takeshi Yasui, and Junko Matsuki. Effect of Amylose
Content on Gelatinization, Retrogradation, and Pasting Properties of Starches
from Waxy and Nonwaxy Wheat and Their F1 Seeds. Cereal Chemistry. Vol.
77, No. 1, 2000.
[54] J. S. Higley, J. E. Nelson, and K. C. Huber, “The Rapid Visco Analyzer as a
Toolfor Differentiating Potato Genotypes on The Basis of Starch Pasting
Properties,” University of Idaho, 2001.
[55] Nur Richana dan Titi Chandra Sunarti. Karakterisasi Sifat Fisikokimia
Tepung Umbi dan Tepung Pati dari Umbi Ganyong, Suweg, Ubikelapa dan
Gembili. Institut Pertanian Bogor. J.Pascapanen 1(1) 2004: 29-37
[56] ASTM D792-91. 1991. “Standard Test Method for Density and Specific
Gravity (Relative Density) of Plastics by Displacement”. The American
Society for Testing and Materials, Philadelphia, U.S.A
[57] ASTM D 638-00. Standard Test Method for Tensile Properties of Plastics. An
American National Standard.
[58] Thermo Nicolet. Introduction Fourier Transform Infra Red Spectrometry.
2001. Madison.
[59] Pramudita, Indah, RN. 2013. “Pembuatan dan Karekteristik Plastik
Biodegradable dari Campuran Limbah Plastik Polipropilen dan Kitosan
Menggunakan Metode Tanpa Pelarut”. Skripsi. Fakultas Matematika dan
Ilmu Pengetahuan Alam. Universitas Lampung.
[60] Setiawan, Hendri; Lutfi, Musthofa; Masruroh. “Optimasi Plastik
Biodegradable Berbahan Jelarut (Marantha arundinacea L) dengan Variasi
LLDPE untuk Meningkatkan Karakteristik Mekanik”. Jurnal Keteknikan
Pertanian Tropis dan Biosistem. 2014. Vol. 2 (2): 124-130.
[61] ASTM 570-98. 2005. Standard Test Method for Water Absorption of
Plastics1. The American Society for Testing and Materials, Philadelphia,
U.S.A
67
Universitas Sumatera Utara
[62] Andy Chandra, Hie Maria Inggrid, dan Verawati. Pengaruh pH dan Jenis
Pelarut pada Perolehan dan Karakterisasi Pati dari Pati Biji Alpukat.
Lembaga Penelitian dan Pengabdian kepada Masyarakat. Universitas Katolik
Parahyangan. 2013
[63] Akbar, Fauzi; Anita, Zulisma Dan Harahap, Hamidah. “Pengaruh Waktu
Simpan Film Plastik Biodegradasi Dari Pati Kulit Singkong Terhadap Sifat
Mekanikalnya”. Jurnal Teknik Kimia USU. 2013. Vol. 2: (2)
[64] AOAC. 1990. Official Methods of Analisis. “Determination of Moisture
Content”. Association of Official Analitycal Chemist. AOAC. Washington
DC. USA
[65] AOAC. 1990. Official Methods of Analisis. “Determination of Ash Content”.
Association of Official Analitycal Chemist. AOAC. Washington DC. USA
[66] Silva, Gervásio Paulo da, Matthias Mack, Jonas Contiero. 2009. “Glycerol: A
Promising and Abundant Carbon Source for Industrial Microbiology”.
Biotechnology advances. Elsevier. Hal 31.
[67] Rahmawati, Wida, Yovita Asih Kusmawati, Dr, Nita Aryanti. ST, MT. 2012.
“Karakterisasi Pati Talas (colocasia Esculenta (L.) Schott) Sebagai Alternatif
Sumber Pati Industri di Indonesia”. Jurusan Teknik Kimia, Fakultas Teknik ,
Undip. Jurnal Teknologi Kimia dan Industri Vol. 1 No. 1 Hal 347-351
[68] J. E. Manatar, J. Pontoh, and M. J. Runtuwene, “Analisis Kandungn Pati
dalam Batang Tanaman Aren (Arenga pinnata),” J. Ilm. Sains, vol. 12, no. 2,
2012.
[69] E. Ginting, Y. Widodo, A. Rahayuningsih, M. Yusuf. Karakteristik Pati
Beberapa Varietas Ubi jalar, Didalam : Rahmi Yulianti dan Erliana Ginting, “
Perbedaan Karakteristik Fisik Edible Film dari Umbi Umbian yang dibuat
dengan Penambahan Plasticizer”. Penelitian Pertanian Tanaman Pangan, 31
(2) 2012: hal. 131-136.
[70] S.L. Ezeoha dan J.N. Ezenwanne. “Production of Biodegradable Plastic
Packaging Film From Cassava Starch”. IOSR Journal of Engineering
(IOSRJEN). Vol. 3 Issue 10. October 2013
[71] J. Jane, L. Shen, J. Chen, S. Lim, T. Kasemsuwan, and W. K. Nip, “Physical
and Chemical Studies of Taro Starches and Flours.,” Cereal Chem., vol. 69,
no. 5, pp. 528–535, 1992.
68
Universitas Sumatera Utara
[72] P. Purworini, “Pemanfaatan Mikrokristal Selulosa Limbah Tandan Kelapa
Muda (Cocos nucifera Linn) Sebagai Bahan Pengisi dalam Film Layak
Makan Pati Tapioka dengan Gliserol sebagai Plastisiser,” Universitas
Sumatera Utara, 2013.
[73] Maryam, A. Kasim, and Santosa, “Utilization Starch of Avocado Seed
(Persea Americana Mill.) as a Raw Material for Dextrin,” J. Food Sci. Eng.,
vol. 6, pp. 32–37, 2016.
[74] L. P. Malanggi, M. S. Sangi, and J. J. E. Paendong, “Penentuan Kandungan
Tanin dan Uji Aktivitas Antioksidan Ekstrak Biji Buah Alpukat ( Persea
americana Mill .),” J. MIPA UNSRAT, vol. 1, no. 1, pp. 5–10, 2012.
[75] L. Yu, Biodegradable Polymer Blends and Composites from Renewable
Resources. New Jersey: John Wiley & Sons, 2009.
[76] F. Xie, H. Liu, P. Chen, T. Xue, L. Chen, L. Yu, and P. Corrigan, “Starch
Gelatinization under Shearless and Shear Conditions Starch Gelatinization
under Shearless and Shear Conditions,” Int. J. Food Eng., vol. 2, no. 5, 2006.
[77] A. M. Pascoal, M. C. B. Di-Medeiros, K. A. Batista, M. I. G. Leles, L. M.
Li??o, and K. F. Fernandes, “Extraction and chemical characterization of
starch from S. lycocarpum fruits,” Carbohydr. Polym., vol. 98, no. 2, pp.
1304–1310, 2013.
[78] W. S. Ratnayake, R. Hoover, and T. Warkentin, “Pea starch: Composition,
structure and properties - A review,” Starch/Staerke, vol. 54, no. 6, pp. 217–
234, 2002.
[79] A. Irwan, Sunardi, and A. Syabatini, “Acrylamide-based Superabsorbent
Polymer (AAM) Grafted BananaTuber Starch (Musa paradisiaca),” Semirata
FMIPA Univ. Lampung Proceeding, pp. 1–5, 2013.
[80] A. Wiyarsi and E. Priyambodo, “Pengaruh Konsentrasi Kitosan dari
Cangkang Udang terhadap Efisiensi Penjerapan Logam Berat,” Yogyakarta,
2008.
[81] V. Suendo, L. O. Ahmad, and S. Valiyaveetiil, “Deasetilasi Kitin secara
Bertahap dan Pengaruhnya terhadap Derajat Deasetilasi serta Massa molekul
Kitosan,” J. Kim. Indones., vol. 5, no. 1, pp. 17–21, 2010.
[82] Q. P. Zhong and W. S. Xia, “Physicochemical Properties of Edible and
Preservative Films from Chitosan/Cassava Starch/Gelatin Blend Plasticized
with Glycerol,” Food Technol. Biotechnol., vol. 46, no. 3, pp. 262–269, 2008.
[83] M. Kaur, P. Kaushal, and K. S. Sandhu, “Studies on physicochemical and
pasting properties of Taro (Colocasia esculenta L.) flour in comparison with a
69
Universitas Sumatera Utara
cereal, tuber and legume flour,” J. Food Sci. Technol., vol. 50, no. 1, pp. 94–
100, 2013.
[84] R. Pongsawatmanit, P. Thanasukarn, and S. Ikeda, “Effect of Sucrose on
RVA Viscosity Parameters , Water Activity and Freezable Water Fraction,”
ScienceAsia, vol. 28, pp. 129–134, 2002.
[85] E. Syamsir, P. Hariyadi, D. Fardiat, Andarwulan, and F. Kusnandar,
“Karaterisasi Tapioka dari Lima Varietas Ubi Kayu (Manihot utilisima
Crantz) Asal Lampung,” Jagrotek, vol. 5, no. 1, pp. 93–105, 2011.
[86] X. . Han and B. . Hamaker, “Amylopectin fine structure and rice starch paste
breakdown,” J. Cereal Sci., vol. 34, no. 3, pp. 279–284, 2001.
[87] A. Kesarwani, P. Y. Chiang, and S. S. Chen, “Rapid Visco Analyzer
Measurements of japonica Rice Cultivars to Study Interrelationship between
Pasting Properties and Farming System,” vol. 2016, 2016.
[88] Jading, A., E. Tethool, P. Payung dan S. Gultom. 2011. Karakteristik
Fisikokimia Pati Sagu Hasil Pengeringan Secara Fluidisasi Menggunakan
Alat Pengering Cross Flow Fluidized Bed Bertenaga Surya dan Biomassa.
Reaktor 13 (3): 155- 164.
[89] S. Agustin, “Effect of Non-starch Polysaccharides on Gelatinization
Properties of Breadfruit Flour,” Teknol. Pertan., vol. 7, no. 1, pp. 28–35,
2011.
[90] T. Beta and H. Corke, “Genetic and environmental variation in sorghum
starch properties,” J. Cereal Sci., vol. 34, pp. 261–268, 2001.
[91] Cho J, Joshi M.S dan Sun C.T. 2006. „‟Effect of Inclusion Size on
Mechanical Properties of Polymeric Composites with Micro and Nano
Particles‟‟. Compos. Sci. Technol, 66 : hal. 1941–1952.
[92] Roohani M, Habibi Y, Belgacern M.N, Ebrahim G, Karimi AN dan Dufresne
A. 2008. „‟Cellulose Whiskers Reinforced Polyvinyl Alcohols Copolymers
Nanocomposites‟‟. Eur. Polym. J, 44 : hal. 2489–2498.
[93] Spink, W. P dan Waychoff W.F. 1959. Plasticizers. Encyclopedia Issue.
Hildrent Press, Inc. New York.
[94] G. B. Veeresh Kumar, C. S. P. Rao, N. Selvaraj, M. S. Bhagyashekar. Studies
on Al6061-SiC and Al7075-Al2O3 Metal Matrix Composites. Journal of
70
Universitas Sumatera Utara
Minerals & Materials Characterization & Engineering, Vol. 9, No.1, pp.4355, 2010
[95] Khaswar Syamsu, Chilwan Pandji, dan Eva Rosalina Lumbanraja, “Pengaruh
Penambahan Polioksietilen-(20)-Sorbitan Monolaurat Pada Karakteristik
Bioplastik Poli-Hidroksialkanoat (PHA) Yang Dihasilkan Ralstonia eutropha
Pada Substrat Hidrolisat Pati Sagu”. Departemen Teknologi Industri
Pertanian, Fakultas Teknologi Pertanian – IPB. J. Tek. Ind. Pert. Vol. 18(1),
41-46.
[96] Rossi, M. “Glycerol: Properties and Production”. Future Of Glycerol. ISBN :
978-0-85404-124-4. 2008. Springer
[97] I. G. Sanjaya and T. Puspita, “Pengaruh Penambahan Kitosan dan Plasticizer
Gliserol pada Karakteristik Plastik Biodegradable dari Pati Limbah Kulit
Singkong,” 2008.
[98] Nur Alim Bahmid, Khaswar Syamsu, dan Akhiruddin Maddu. “Influence Of
Cellulose Acetate Fibers Size And Diethylen Glikol (DEG) Addition On
Physical And Mechanical Properties Of Bioplastics”. Jurnal Teknologi
Industri Pertanian .24 (3):226-234 (2014).
[99] Utami, Meilina Rahayu dan Latifah dan NuniWidiarti. 2014. “Sintesis Plastik
Biodegradable dari Kulit Pisang dengan Penambahan Kitosan dan Plasticizer
Gliserol”. Indonesian Journal of Chemical Science. Vol. 3 (2) : 163-167.
[100] Nathiqoh Al Ummah. Uji Ketahanan Biodegradable Plastic Berbasis Tepung
Biji Durian (durio zibethinus Murr) Terhadap Air dan Pengukuran
Densitasnya. Jurusan Fisika. Fakultas Matematika dan Ilmu
Pengetahuan.Universitas Negeri Semarang. Skripsi. 2013.
[101] Bruno Robert Mose and Stephen Moffat Maranga. “A Review on Starch
Based Nanocomposites for Bioplastic Materials. Department of Mechanical
Engineering, Jomo Kenyatta University of Agriculture & Technology,
Nairobi,
71
Universitas Sumatera Utara
[1] Begum I, Zareena. “Plastics and Environment”. Dissemination Paper – 12.
Centre of Excellence in Environmental Economics. Madras School of
Economics. 2010.
[2] Kipngetich, Terer Erick and Hillary, Magut. “A blend of Green Algae and
Sweet Potato Starch as a Potential Source of Bioplastic Production and Its
Significance to the Polymer Industry”. International Journal of Green and
Herbal Chemistry. Vol.2. Department of Chemistry, University of Eastern
Africa, Baraton. 2013.
[3] A. Jones, M. Zeller, and S. Sharma, “Thermal, mechanical, and moisture
absorption properties of egg white protein bioplastics with natural rubber and
glycerol,” Prog. Biomater., vol. 2, no. 1, p. 12, 2013.
[4] et. al Cereda, M.P, “Characterization of Edible Films of Cassava Strach by
Electron Microscopy,” J. Food Technol., pp. 91–95, 2000.
[5] Darni, Yuli, Sri Ismiyati D, Tigor Marbun. “Influence Concentration of
Plasticizer and Formulation of Banana Starch – Chitosan to Mechanical
Property and Water Uptake of Bioplastic”. International Journal of
Engineering and Science. Vol. 1, No.4, 2010. Teknik Kimia. Fakultas
Teknik. Universitas Malahayati Press. 2010.
[6] Plastice. 2013. “Future of Bioplastics”. 3rd International Plastice Conference.
Cobro – Packaging Research Institute. Poland.
[7] Ave´rous, L. “Biodegradable Multiphase Systems Based on Plasticized
Starch: a review”. Journal of Macromolecular Science – Part C Polymer
Reviews, C4(3), 231–274. 2004.
[8] Badan Pusat Statistik, “Survey Pertanian Produksi
Indonesia”, Biro Pusat Statistik, Jakarta, 2013.
Buah-buahan
di
[9] Kahn, Varda. “Characterization of Starch Isolated from Avocado Seeds”.
Jouurnal of Food Science. Volume 52, No. 6, 1987. Hal.1646
[10] Stephen, A.M., 1995, Food Polysaccharides and Their Application,
University of Cape Town, Marcel Dekker, Inc, Rondebosch, 442-450.
62
Universitas Sumatera Utara
[11] Prashanth, K.V., Harish, K. L, Shamalab, T.R., dan Tharanathan, R.N. 2005.
“Biodegradation of Kitosan-Graft-Polymethylmethacrylate Films”. Journal of
International Biodeterioration & Biodegradation. 56: 115–120.
[12] Y. Darni, “Penentuan Kondisi Optimum Ukuran Partikel dan Bilangan
Reynold Pada Sintesis Bioplastik Berbasis Sorgum,” J. Rekayasa Kim. dan
Lingkung., vol. 8, no. 2, pp. 95–103, 2011.
[13] Yadav, G., & Satoskar. 1997. “Kinetic of Exposidation of alkyl Esters of
Undercylenic Acid: Comparison of traditional Route us Ishii”. Venturello
Chemistry , 74, 397-401.
[14] Bourtoom, Thawien. “Plasticizer Effect on the Properties of Biodegradable
Blend Film From Rice Starch-Chitosan”. Songklanakarin J. Sci. Technol.30
(Suppl.1), 149-165, April 2008. Department of Material Product Technology,
Faculty of Agro-Industry, Prince of Songkla University, Hat Yai, Songkhla,
90112, Thailand. Songklanakarin Journal of Science and Technology.
[15] M. H. S. Ginting, M. F. R. Tarigan, and A. M. Singgih, “Effect of
Gelatinization Temperature and Chitosan on Mechanical Properties of
Bioplastics from Avocado Seed Starch (Persea americana mill) with
Plasticizer Glycerol,” Int. J. Eng. Sci., vol. 4, no. 12, pp. 36–43, 2015.
[16] Widyaningsih, Senny, Dwi Kartika, Yuni Tri Nurhayati. Pengaruh
Penambahan Sorbitol dan Kalsium Karbonat Terhadap Karakteristik dan Sifat
Biodegradasi Film dari Pati Kulit Pisang. Molekul, Vol. 7, No. 1. Program
Studi Kimia, Fakultas Sains dan Teknik, Unsoed, Purwokerto. 2012.
[17] Lazuardi, Gilang Pandu dan Sari Edi Cahyaningrum. 2013. “Preparation and
Characterization Based Bioplastic Chitosan and Cassava Starch with Glycerol
Plazticizer”. Journal of Chemistry. Vol. 2 (3) : 161-166.
[18] K. J. Seal, “Test Methods and Standards for Biodegradable Plastics,” in
Chemistry and Technology of Biodegradable Polymer, 1994.
[19] W. M. Putra, “Pengaruh Penambahan Selulosa Mahkota Nanas dalam
Pembuatan Plastik Biodegradable dari Pati Umbi Gadung (Dioscorea densst)
dengan menggunakan Plastisizer Gliserin,” Politeknik Negeri Sriwijaya,
2015.
63
Universitas Sumatera Utara
[20] L. Avérous, “Polylactic Acid: Synthesis, Properties and Applications,” in
Monomers, Polymers and Composites from Renewable Resources, 2008, pp.
433–449.
[21] L. Liu, J. L. Kennedy, and P. K. Joseph, “Selection of Optimum Extraction
Technology Parameters in The Manufacture of Edible/Biodegradable
Packaging Film Derivated from Food Based Polymers,” J. Agric. Environ.,
vol. 3, 2005.
[22] H. Herawati, “Potensi Pengembangan Produk Pati Tahan Cerna sebagai
Pangan Fungsional,” J. Litbang Pertan., vol. 30, no. 024, 2011.
[23] D. R. Lu, C. M. Xiao*, S. J. Xu. Starch-based completely biodegradable
polymer materials. College of Material Science and Engineering of Huaqiao
University, Quanzhou, 362021, P. R. China. eXPRESS Polymer Letters
Vol.3, No.6 (2009) 366–375.
[24] A.-C. Elliasson, Starch in Food: Structur, Function and Applications, First
Publ. Cambridge: Woodhead Publishing Limited, 2004.
[25] J. BeMiller and R. Whistler, Starch: Chemistry and Technology. USA:
Elsevier, 2009.
[26] Elida Purba. 2009. “Hidrolisis Pati Ubi Kayu (Manihot Esculenta) dan Pati
Ubi Jalar (Impomonea batatas) menjadi Glukosa Secara Cold Process dengan
Acid Fungal amylase dan Glukoamilase”. Lampung : Universitas Lampung
[27] Kolusheva, T. and A. Marinova. “A study of the Optimal conditions For
Starch Hydrolysis Through Thermostable α –Amylase”. Journal of the
University of Chemical Technology and Metallurgy, 42(1): 93-96.2007.
[28] M. Tako, Y. Tamaki, T. Teruya, and Y. Takeda, “The Principles of Starch
Gelatinization and Retrogradation,” Food Nutr. Sci., vol. 5, pp. 180–291,
2014.
[29] N. A. Amin, “Pengaruh Suhu Fosforilasi terhadap Sifat Fisikokimia Pati
Tapioka Termodifikasi,” Universitas Hasanuddin, 2013.
64
Universitas Sumatera Utara
[30] Ganda Merisiyanto dan Lizda Johar Mawarani. Pengembangan Plastik
Photobiodegradable Berbahan Dasar Umbi Ubi Jalar. Jurusan Teknik Fisika,
Fakultas Teknologi Industri, Institut Teknologi Sepuluh Nopember (ITS).
Jurnal Teknik Pomits Vol. 2, No. 1, (2013) ISSN: 2337-3539.
[31] Otto B. Wurzburg, Modified Starchs: Properties and Uses, United States :
CRC Press Inc. (1989).
[32] Nelis Imanningsih. Profil Gelatinisasi Beberapa Formulasi Tepung-Tepungan
Untuk Pendugaan Sifat Pemasakan. Penel Gizi Makan 2012, 35(1): 13-22
[33] A. Chandra, H. M. Inggrid, and Verawati, “Pengaruh pH dan Jenis Pelarut
pada Perolehan dan Karakterisasi Pati dari Biji Alpukat,” Lemb. Penelit. dan
Pengabdi. Masy., vol. 03, no. 7, pp. 30–39, 2013.
[34] B.A Orhevba and A.O Jinadu,”Determination Of Physico-Chemical
Properties and Nutritional Contents Of Avocado Pear (Persea Americana
M.)”, Journal Academic Research International, Vol. 1, No. 3, 2011, hal. 373374.
[35] Hika Citra Handayani A.P,” Pengaruh Peningkatan Konsetrasi Ekstrak Etanol
96% Biji Alpukat (Perseae americana Mill) Terhadap Formulasi Sabun Padat
Transparan”, Skripsi. Program Studi Farmasi Universitas Islam Negeri Syarif
Hidayatullah, Jakarta. 2009, hal. 28.
[36] Arukwe, U., Amadi, B.A., Duru, M. K.C., Agomuo,E.N., Adindu, E. A.,
Odika, P.C., Lele, K.C., Egejuru, L., and Anudike, J.,”Chemical Composition
Of Persea Americana Leaf, Fruit and Seed”, IJRRAS, Vol. 11, No. 2, 2012,
hal. 346-347.
[37] D. Listiyaningsih, “Manufacture and Characterization of Dioscorea esculenta
Starch-Chitosan with Plasticizer Ethylen Glicol ,” Universitas Negeri
Semarang, Semarang, 2013.
[38] Erfan, Ahmad. 2012. Sintesis Bioplastik Dari Pati Ubi Jalar Menggunakan
Penguat Logam ZnO Dan Penguat Alami Kitosan. Skripsi. Program
StudiTeknik Kimia. Fakultas Teknik. Universitas Indonesia.
[39] Tabrani, Emping Jagung: Teknologi dan Kendalanya. Bandung: Institut
Teknologi Bandung, 1997.
65
Universitas Sumatera Utara
[40] S. Wijana, I. Nurika, and E. Habibah, “Analisis Kelayakan Kualitas Tapioka
Berbahan Baku Gaplek (Pengaruh Asal Gaplek Dan Kadar Kaporit Yang
Digunakan),” J. Teknol. Pertan., vol. 10, no. 2, pp. 97–105, 2009.
[41] A. Triyono, “Peningkatan Fungsional Pati dari Ubi Jalar (Ipomea batatas L.)
dengan Enzim Alfa-Amilase (Bacillus subtilis) sebagai Bahan Substitusi
Pengolahan Pangan,” J. Sains MIPA, vol. 13, no. 1, pp. 60–66, 2007.
[42] Zulharmita, S. Nola Dewi, and Mahyuddin, “Pembuatan Mikrokristalin
Selulosa dari Ampas Tebu (Saccharum officinarum L.),” J. Sains dan Teknol.
Farm., vol. 17, no. 2, pp. 158–163, 2012.
[43] Martunis, “Pengaruh Suhu Dan Lama Pengeringan Terhadap Kuantitas Dan
Kualitas Pati Kentang Varietas Granola,” J. Teknol. dan Ind. Pertan. Indones.,
vol. 4, no. 3, 2012.
[44] Robyt, J.F. (1998). “Essentials of Carbohydrate Chemistry” , Springer, ISBN
0-38794951-8, New York, USA.
[45] ] Utrilla, R. Coello M.E. Rodriguez, Huezo H. Carillo, Navas C. Hernandez,
Jaimes E.J. Vernon, Carter J. Alvarez, Ramirez. 2013. “In Vitro Digestibility,
Physicochemical, Thermal and Rheological Properties of Banana Starches”.
2013.
[46] M. A. Bertuzzi, “Mechanical properties of a high amylose content corn starch
based film , gelatinized at low temperature Propriedades mecânicas de filme a
base de amido de milho,” Brazilian J. Food Technol., vol. 15, no. 3, pp. 219–
227, 2012.
[47] A. M. Legowo, “Analisis Pangan,” Semarang, 2004.
[48] R. Amalia, “Karakterisasi Fisikokimia dan Fungsional Tepung Komposit
Berbahan Dasar Beras, Ubi Jalar, Kentang, Kedelai, dan Xanthan Gum,”
Universitas Sumatera Utara, 2013.
[49] Firmansyah, I. U. Suarni, and M. Aqil, “Keragaman Mutu Pati Beberapa
Varietas Jagung,” Penelit. Pertan. Tanam. Pangan, vol. 32, no. 1, 2013.
[50] E.C.Y. Li-Chan. “Of Protein in Food Systems : an introduction”. The
University of British Columbia. Canada. Proteins in Food
Processing.Woodhead Publishing in Food Science and Technology. 2000.
66
Universitas Sumatera Utara
[51] N. Guerrieri, University of Milan, Italy. Cereal proteins. Proteins in Food
Processing.Woodhead Publishing in Food Science and Technology. 2000.
[52] Standar Nasional Indonesia. Cara Uji Makanan dan Minuman. SNI - 012891-1992. Badan Standardisasi Nasional
[53] Tomoko Sasaki, Takeshi Yasui, and Junko Matsuki. Effect of Amylose
Content on Gelatinization, Retrogradation, and Pasting Properties of Starches
from Waxy and Nonwaxy Wheat and Their F1 Seeds. Cereal Chemistry. Vol.
77, No. 1, 2000.
[54] J. S. Higley, J. E. Nelson, and K. C. Huber, “The Rapid Visco Analyzer as a
Toolfor Differentiating Potato Genotypes on The Basis of Starch Pasting
Properties,” University of Idaho, 2001.
[55] Nur Richana dan Titi Chandra Sunarti. Karakterisasi Sifat Fisikokimia
Tepung Umbi dan Tepung Pati dari Umbi Ganyong, Suweg, Ubikelapa dan
Gembili. Institut Pertanian Bogor. J.Pascapanen 1(1) 2004: 29-37
[56] ASTM D792-91. 1991. “Standard Test Method for Density and Specific
Gravity (Relative Density) of Plastics by Displacement”. The American
Society for Testing and Materials, Philadelphia, U.S.A
[57] ASTM D 638-00. Standard Test Method for Tensile Properties of Plastics. An
American National Standard.
[58] Thermo Nicolet. Introduction Fourier Transform Infra Red Spectrometry.
2001. Madison.
[59] Pramudita, Indah, RN. 2013. “Pembuatan dan Karekteristik Plastik
Biodegradable dari Campuran Limbah Plastik Polipropilen dan Kitosan
Menggunakan Metode Tanpa Pelarut”. Skripsi. Fakultas Matematika dan
Ilmu Pengetahuan Alam. Universitas Lampung.
[60] Setiawan, Hendri; Lutfi, Musthofa; Masruroh. “Optimasi Plastik
Biodegradable Berbahan Jelarut (Marantha arundinacea L) dengan Variasi
LLDPE untuk Meningkatkan Karakteristik Mekanik”. Jurnal Keteknikan
Pertanian Tropis dan Biosistem. 2014. Vol. 2 (2): 124-130.
[61] ASTM 570-98. 2005. Standard Test Method for Water Absorption of
Plastics1. The American Society for Testing and Materials, Philadelphia,
U.S.A
67
Universitas Sumatera Utara
[62] Andy Chandra, Hie Maria Inggrid, dan Verawati. Pengaruh pH dan Jenis
Pelarut pada Perolehan dan Karakterisasi Pati dari Pati Biji Alpukat.
Lembaga Penelitian dan Pengabdian kepada Masyarakat. Universitas Katolik
Parahyangan. 2013
[63] Akbar, Fauzi; Anita, Zulisma Dan Harahap, Hamidah. “Pengaruh Waktu
Simpan Film Plastik Biodegradasi Dari Pati Kulit Singkong Terhadap Sifat
Mekanikalnya”. Jurnal Teknik Kimia USU. 2013. Vol. 2: (2)
[64] AOAC. 1990. Official Methods of Analisis. “Determination of Moisture
Content”. Association of Official Analitycal Chemist. AOAC. Washington
DC. USA
[65] AOAC. 1990. Official Methods of Analisis. “Determination of Ash Content”.
Association of Official Analitycal Chemist. AOAC. Washington DC. USA
[66] Silva, Gervásio Paulo da, Matthias Mack, Jonas Contiero. 2009. “Glycerol: A
Promising and Abundant Carbon Source for Industrial Microbiology”.
Biotechnology advances. Elsevier. Hal 31.
[67] Rahmawati, Wida, Yovita Asih Kusmawati, Dr, Nita Aryanti. ST, MT. 2012.
“Karakterisasi Pati Talas (colocasia Esculenta (L.) Schott) Sebagai Alternatif
Sumber Pati Industri di Indonesia”. Jurusan Teknik Kimia, Fakultas Teknik ,
Undip. Jurnal Teknologi Kimia dan Industri Vol. 1 No. 1 Hal 347-351
[68] J. E. Manatar, J. Pontoh, and M. J. Runtuwene, “Analisis Kandungn Pati
dalam Batang Tanaman Aren (Arenga pinnata),” J. Ilm. Sains, vol. 12, no. 2,
2012.
[69] E. Ginting, Y. Widodo, A. Rahayuningsih, M. Yusuf. Karakteristik Pati
Beberapa Varietas Ubi jalar, Didalam : Rahmi Yulianti dan Erliana Ginting, “
Perbedaan Karakteristik Fisik Edible Film dari Umbi Umbian yang dibuat
dengan Penambahan Plasticizer”. Penelitian Pertanian Tanaman Pangan, 31
(2) 2012: hal. 131-136.
[70] S.L. Ezeoha dan J.N. Ezenwanne. “Production of Biodegradable Plastic
Packaging Film From Cassava Starch”. IOSR Journal of Engineering
(IOSRJEN). Vol. 3 Issue 10. October 2013
[71] J. Jane, L. Shen, J. Chen, S. Lim, T. Kasemsuwan, and W. K. Nip, “Physical
and Chemical Studies of Taro Starches and Flours.,” Cereal Chem., vol. 69,
no. 5, pp. 528–535, 1992.
68
Universitas Sumatera Utara
[72] P. Purworini, “Pemanfaatan Mikrokristal Selulosa Limbah Tandan Kelapa
Muda (Cocos nucifera Linn) Sebagai Bahan Pengisi dalam Film Layak
Makan Pati Tapioka dengan Gliserol sebagai Plastisiser,” Universitas
Sumatera Utara, 2013.
[73] Maryam, A. Kasim, and Santosa, “Utilization Starch of Avocado Seed
(Persea Americana Mill.) as a Raw Material for Dextrin,” J. Food Sci. Eng.,
vol. 6, pp. 32–37, 2016.
[74] L. P. Malanggi, M. S. Sangi, and J. J. E. Paendong, “Penentuan Kandungan
Tanin dan Uji Aktivitas Antioksidan Ekstrak Biji Buah Alpukat ( Persea
americana Mill .),” J. MIPA UNSRAT, vol. 1, no. 1, pp. 5–10, 2012.
[75] L. Yu, Biodegradable Polymer Blends and Composites from Renewable
Resources. New Jersey: John Wiley & Sons, 2009.
[76] F. Xie, H. Liu, P. Chen, T. Xue, L. Chen, L. Yu, and P. Corrigan, “Starch
Gelatinization under Shearless and Shear Conditions Starch Gelatinization
under Shearless and Shear Conditions,” Int. J. Food Eng., vol. 2, no. 5, 2006.
[77] A. M. Pascoal, M. C. B. Di-Medeiros, K. A. Batista, M. I. G. Leles, L. M.
Li??o, and K. F. Fernandes, “Extraction and chemical characterization of
starch from S. lycocarpum fruits,” Carbohydr. Polym., vol. 98, no. 2, pp.
1304–1310, 2013.
[78] W. S. Ratnayake, R. Hoover, and T. Warkentin, “Pea starch: Composition,
structure and properties - A review,” Starch/Staerke, vol. 54, no. 6, pp. 217–
234, 2002.
[79] A. Irwan, Sunardi, and A. Syabatini, “Acrylamide-based Superabsorbent
Polymer (AAM) Grafted BananaTuber Starch (Musa paradisiaca),” Semirata
FMIPA Univ. Lampung Proceeding, pp. 1–5, 2013.
[80] A. Wiyarsi and E. Priyambodo, “Pengaruh Konsentrasi Kitosan dari
Cangkang Udang terhadap Efisiensi Penjerapan Logam Berat,” Yogyakarta,
2008.
[81] V. Suendo, L. O. Ahmad, and S. Valiyaveetiil, “Deasetilasi Kitin secara
Bertahap dan Pengaruhnya terhadap Derajat Deasetilasi serta Massa molekul
Kitosan,” J. Kim. Indones., vol. 5, no. 1, pp. 17–21, 2010.
[82] Q. P. Zhong and W. S. Xia, “Physicochemical Properties of Edible and
Preservative Films from Chitosan/Cassava Starch/Gelatin Blend Plasticized
with Glycerol,” Food Technol. Biotechnol., vol. 46, no. 3, pp. 262–269, 2008.
[83] M. Kaur, P. Kaushal, and K. S. Sandhu, “Studies on physicochemical and
pasting properties of Taro (Colocasia esculenta L.) flour in comparison with a
69
Universitas Sumatera Utara
cereal, tuber and legume flour,” J. Food Sci. Technol., vol. 50, no. 1, pp. 94–
100, 2013.
[84] R. Pongsawatmanit, P. Thanasukarn, and S. Ikeda, “Effect of Sucrose on
RVA Viscosity Parameters , Water Activity and Freezable Water Fraction,”
ScienceAsia, vol. 28, pp. 129–134, 2002.
[85] E. Syamsir, P. Hariyadi, D. Fardiat, Andarwulan, and F. Kusnandar,
“Karaterisasi Tapioka dari Lima Varietas Ubi Kayu (Manihot utilisima
Crantz) Asal Lampung,” Jagrotek, vol. 5, no. 1, pp. 93–105, 2011.
[86] X. . Han and B. . Hamaker, “Amylopectin fine structure and rice starch paste
breakdown,” J. Cereal Sci., vol. 34, no. 3, pp. 279–284, 2001.
[87] A. Kesarwani, P. Y. Chiang, and S. S. Chen, “Rapid Visco Analyzer
Measurements of japonica Rice Cultivars to Study Interrelationship between
Pasting Properties and Farming System,” vol. 2016, 2016.
[88] Jading, A., E. Tethool, P. Payung dan S. Gultom. 2011. Karakteristik
Fisikokimia Pati Sagu Hasil Pengeringan Secara Fluidisasi Menggunakan
Alat Pengering Cross Flow Fluidized Bed Bertenaga Surya dan Biomassa.
Reaktor 13 (3): 155- 164.
[89] S. Agustin, “Effect of Non-starch Polysaccharides on Gelatinization
Properties of Breadfruit Flour,” Teknol. Pertan., vol. 7, no. 1, pp. 28–35,
2011.
[90] T. Beta and H. Corke, “Genetic and environmental variation in sorghum
starch properties,” J. Cereal Sci., vol. 34, pp. 261–268, 2001.
[91] Cho J, Joshi M.S dan Sun C.T. 2006. „‟Effect of Inclusion Size on
Mechanical Properties of Polymeric Composites with Micro and Nano
Particles‟‟. Compos. Sci. Technol, 66 : hal. 1941–1952.
[92] Roohani M, Habibi Y, Belgacern M.N, Ebrahim G, Karimi AN dan Dufresne
A. 2008. „‟Cellulose Whiskers Reinforced Polyvinyl Alcohols Copolymers
Nanocomposites‟‟. Eur. Polym. J, 44 : hal. 2489–2498.
[93] Spink, W. P dan Waychoff W.F. 1959. Plasticizers. Encyclopedia Issue.
Hildrent Press, Inc. New York.
[94] G. B. Veeresh Kumar, C. S. P. Rao, N. Selvaraj, M. S. Bhagyashekar. Studies
on Al6061-SiC and Al7075-Al2O3 Metal Matrix Composites. Journal of
70
Universitas Sumatera Utara
Minerals & Materials Characterization & Engineering, Vol. 9, No.1, pp.4355, 2010
[95] Khaswar Syamsu, Chilwan Pandji, dan Eva Rosalina Lumbanraja, “Pengaruh
Penambahan Polioksietilen-(20)-Sorbitan Monolaurat Pada Karakteristik
Bioplastik Poli-Hidroksialkanoat (PHA) Yang Dihasilkan Ralstonia eutropha
Pada Substrat Hidrolisat Pati Sagu”. Departemen Teknologi Industri
Pertanian, Fakultas Teknologi Pertanian – IPB. J. Tek. Ind. Pert. Vol. 18(1),
41-46.
[96] Rossi, M. “Glycerol: Properties and Production”. Future Of Glycerol. ISBN :
978-0-85404-124-4. 2008. Springer
[97] I. G. Sanjaya and T. Puspita, “Pengaruh Penambahan Kitosan dan Plasticizer
Gliserol pada Karakteristik Plastik Biodegradable dari Pati Limbah Kulit
Singkong,” 2008.
[98] Nur Alim Bahmid, Khaswar Syamsu, dan Akhiruddin Maddu. “Influence Of
Cellulose Acetate Fibers Size And Diethylen Glikol (DEG) Addition On
Physical And Mechanical Properties Of Bioplastics”. Jurnal Teknologi
Industri Pertanian .24 (3):226-234 (2014).
[99] Utami, Meilina Rahayu dan Latifah dan NuniWidiarti. 2014. “Sintesis Plastik
Biodegradable dari Kulit Pisang dengan Penambahan Kitosan dan Plasticizer
Gliserol”. Indonesian Journal of Chemical Science. Vol. 3 (2) : 163-167.
[100] Nathiqoh Al Ummah. Uji Ketahanan Biodegradable Plastic Berbasis Tepung
Biji Durian (durio zibethinus Murr) Terhadap Air dan Pengukuran
Densitasnya. Jurusan Fisika. Fakultas Matematika dan Ilmu
Pengetahuan.Universitas Negeri Semarang. Skripsi. 2013.
[101] Bruno Robert Mose and Stephen Moffat Maranga. “A Review on Starch
Based Nanocomposites for Bioplastic Materials. Department of Mechanical
Engineering, Jomo Kenyatta University of Agriculture & Technology,
Nairobi,
71
Universitas Sumatera Utara